Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Misc Garage Door Dock & Gate
.273_2-5/8"-LH

Torsion Spring .273 x 2-5/8" x 12ft LH Orange/Red

  • Wire size: .273
  • Inside diameter: 2-5/8"
  • Length: 12 ft
LAGS141W

Fasteners Lag Screw Stainless Steel 1/4" x 1" Hex Washer Head 3/8" Sold Individually

H12G03-SS

Hinge #3 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
E3JM-30FT

Omron Thru-Beam Photoelectric Sensor Nema 4 0-30ft Range

  • Easy-to-wire terminal block
  • Built-in timer offers selectable ON-delay OFF-delay and one-shot
  • Relay or transistor output models
  • Light-ON/Dark-ON operation switch selectable
  • Model: E3JM-10M4-US
.283-258-L

Cut-to-Length Torsion Spring .283 x 2-5/8" Left Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
BK023/PR

Commercial 3" LHR Bottom Brackets Sold as a Pair (L & R)

  • Same as BB-6-3 reinforced c/w cotter and clevis pins
  • Use with: 3" straight track
  • Sold as a pair (includes one left and one right).
ANGLE-13G-2X2

Perforated Angle 2" x 2" x 10 ft 13 g

  • All holes No slots
  • Hole size: 7/16"
H11G11

Hinge #11 x 11 gauge

  • 11 gauge # 11 hinge - 0.93 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
236515

Wayne Dalton Res. Bottom Bracket Roller Holder LH

  • Compatible with Wayne Dalton 9100 9400 9600 9800 Foamcore II garage door models.
  • Pins & Cotters Included
  • Top quality galvanized steel
  • Dimensions: 4" Wide x 1.25" High x 1" side flange with milford pin
  • Sold as a single unit
236514

Wayne Dalton Res. Bottom Bracket Roller Holder RH

  • Compatible with Wayne Dalton 9100 9400 9600 9800 Foamcore II garage door models.
  • Pins & Cotters Included
  • Top quality galvanized steel
  • Dimensions: 4" Wide x 1.25" High x 1" side flange with milford pin
  • Sold as a single unit
RENO-BX4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector

  • The Model BX is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
  • Eight detection sensitivity levels are selectable by means of a front panel mounted rotary switch external dip switches
  • Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep
3B4X-SS

Control Station Exterior Stainless Steel Enclosure Surface Mount O/C/S N4X

  • OPEN-CLOSE-STOP Push Button
  • Stainless Steel Enclosure
  • Buttons aligned vertically
  • Dimensions: H=6-3/4"” W=3-1/2"” D=3-1/2"”
3EBX

Explosion Proof 3-Btn Pushbutton Control Station

  • Not rated for division or class
  • Three button O/C/S Nema-7/9
  • Surface mount
  • Dimensions: H=6-1/8" x W=3" x D=4-3/8"
LVB624-11

Laminated Bumper Black 6" Projection Vertical Installation 24" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB420-11

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LVB1020-11

Laminated Bumper Black 10" Projection Vertical Installation 20" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
SL532COP

Copper Sleeve 5/32" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST532COP
ST532COP

Copper Stop 5/32" 100 Stops per Pkg *price on request

  • Stops ONLY
  • Sleeves sold separately part # SL532COP
CABLE_532SS-500

Cable 5/32" 7x19 Stainless Steel 500ft

Comparison charts
GALV-243-2-L

Cut-to-Length Torsion Spring .243 x 2" Left Hand Wound Galvanized White/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED