Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Misc Garage Door Dock & Gate
LB410-14SF/P1

Steel Faced Laminated Bumper Black 10" x 14" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
D4-36

Extruded Bumper Black 36" L x 4 1/2" W x 3 3/4" H w/Metal Insert

  • Reinforced prime rubber of Durometer 75 (±5) (ASTM D2240)
  • 8.3 N/mm2 (±0.5) Tensile Strength (ASTM D792)
  • 98% (±2) impact recovery
  • All extruded fenders are supplied with a metal washer insert
  • 3 holes
.375-6-R

Cut-to-Length Torsion Spring .375 x 6" Right Hand Wound Yellow/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.375-6-L

Cut-to-Length Torsion Spring .375 x 6" Left Hand Wound Yellow/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
2G-LEFT

Rolling Steel 2" Curved Stamped Endlock Left Hand

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are at both ends of every slat.
  • Rivets included with endlock
2G-RIGHT

Rolling Steel 2" Curved Stamped Endlock Right Hand

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are at both ends of every slat.
  • Rivets included with endlocks
BPFL205

Bearing Flangette Retainer Only PFL-205 2-Hole

  • Does not include bearing
  • Steel Zinc plated finish
R6000

Shaft Collar 1" with 2 Set Screws

  • Set Screws: 5/16 x 18
MK008050

Push Button Standard Residential Non-Illuminated 2 Wire Bell Button

  • SPST
  • 2 mounting holes
  • Dimensions: 2.375 x 0.875 x 0.75 inches
  • Color: Light Gray
  • Intended for indoor use
3BLM

Exterior Control Station 3 Button N4 with Mortise Lockout in Metal Enclose

  • Open-Close-Stop
  • Dimensions: 7" h x 2-3/4" w x 3-1/2" d
  • Exterior surface mount
3BLM
3BXLT

Control Station Exterior Surface Mount O/C/S N4 with Lockout Non-Metallic

  • Double pole contacts
  • Stations are randomly shipped with key numbers betwwen K001-K005 unless a specific key number is specified
  • Comes with 2 keys
  • H=7" W=2-3/4" D=2-3/4"
3BXT
CABLE_316SS5000

Cable 3/16" 7x19 5000' Stainless Steel ** Price on request

Comparison charts
HSO112

Hinge 1/2-Hinge OHD "A" Style 12-ga Stainless Steel

  • Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
  • Laser Cut for a Clean Finish
H14G06

Hinge #6 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #6 position
  • Use between sections 6 and 7
  • Same as part number 246
    • .......more details
H14G05

Hinge #5 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #5 position
  • Use between sections 5 and 6
  • Same as part number 245
    • .......more details
SOFT_EDGE-PROFILE

Devanco Canada Soft Edge Profile Sold per Foot

  • Yellow air-wave edge
  • Fits most 1-3/8" to 2" bottom retainers
  • 300 feet in a roll
27-48-220

Extension Spring 8' Door - 220 lbs Green with clip

  • Single - Loop
  • 27" long 48" stretch 220 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
D525-216-1

Cable Drum Standard Lift 18' 3-SS Torque Force Pair

  • 18' standard Lift aluminum die cast alloy with 3 set screws.
  • Pair includes: (1) LH and (1) RH.
  • Color coded: Red=LH and Black=RH
  • Max. Door Height: 18'-1" Rated Lift per Drum: 750 lbs.
  • Max. Cable Diameter: 3/16". Mounting: 1" solid shaft with 1/4" keyway
  • Cross Reference: DM518 DNS 5-18 OMI 2200
    • .......more details
H14G04

Hinge #4 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #4 position
  • Use between sections 4 and 5
  • Same as part number 244
    • .......more details
H14G03

Hinge #3 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #3 position
  • Use between sections 3 and 4
  • Same as part number 243
    • .......more details