Devanco Canada - Get The Right Garage Door Opener‎ and Parts

SF375

Spring Fitting 3-3/4" Pair (Long Ear)

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
Winding bar hole 5/8"

.......more details

ANGLE-13G-2X2

Perforated Angle 2" x 2" x 10 ft 13 g

All holes No slots
Hole size: 7/16"

JRGX1

Chain Hoist Jack Shaft JRG V2 1" Shaft Torque Force (126689)

Jack Shaft Mounting plastic guide 4.5:1 reduction
Gear drive
Fits 3-3/8" minimum offset
Includes: 26' of galvanized hand chain - doors higher than 15' require additional hand chain
1 chain keeper
2 shaft collars

.......more details

Sell sheet

Z9003-MAX

Pusher Spring - 27" with 3" diameter Tip Sold as a Pair

Pusher spring 27" long with a large 3" tip. Sold as a pair
11lbs of initial pushing strength per spring+ 3lbs per inch per spring

GALV-295-334-R

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Galvanized Blue Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

R5209

Cast Iron Pulley 4"

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/4"
Cast iron pulley mounted on two pressed sealed bearings
300lb load rating

BK311

Jamb bracket J-11 #11 12 gauge

Sold by the piece
Height 4.75" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

CHS401

Chain Hoist Shaft Mount 4:1 JR 4020 Torque Force (126684)

Shaft Mounted Junior Hoist
4:1 Reduced Drive
Sprocket: 41B36. Bore size: 1" diameter
Cross Reference: OMI 4020
Requires minimum 3/8" center line offset.
Set includes: 26' of hand chain 22" of #41 roller chain Chain keeper (2) shaft collars 1/4" square key and a wall stabilizer bracket.

.......more details

Sell sheet

BK111/PR

End Bearing Plate Flanged Heavy Duty 8-GA 3-3/8" without Bearing. Sold as a pair

They have 4 slots surrounding the hole to accommodate a regular bearing (with flange).
A pillow block bearing could be used if needed
Includes (1) RH and (1) LH plate

24-HWB-PAIR

Winding Bars Hex 24" Set of 2

Cold rolled hardened steel.
Hex shape keeps the bar from rolling away.
Machined to 1/2" at one end with a 5/8" outside dia. on the other end
Sold as a pair.

19-3025

Roller Chain #50 Nickel Plated 25ft Length

H11G03-SS

Hinge #3 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

GALV-319-6-R

Cut-to-Length Torsion Spring .319 x 6" Right Hand Galvanized Blue/Green

Spring wire only. Cones and Filler extra

RN0029-SS

Roller 2" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

A supreme double sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
200 lb load 50000 cycles

Z9998

Hand Chain 26' for Torque Force Chain Hoists SAE 1008 Zinc Plated

Works with all Torque Force Chain Hoists

CB5320500

Cable 5/32" 7x19 500' Galvanized

Galvanized cable 5/32" 7x19 500ft spool.
Cable break strength: 2800 lbs

Comparison charts

C20-32F

Bearing 1-1/4" x 2" Press Fit C20-32F+GR 400 LBS

Stamped bearing for lighter loads
For a heavier duty machined bearing use R5114

27-48-220

Extension Spring 8' Door - 220 lbs Green with clip

Single - Loop
27" long 48" stretch 220 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

SBPFL205-16

Flange mount Sealed Roller Bearing 1" Bore Football Style set screw locking

RS10311

Roller 3" Steel 11" stem 10 ball

Steel Roller Wheel diameter: 3"


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login