Devanco Canada - Get The Right Garage Door Opener‎ and Parts

HAE00013

Linear Turnbuckle Assembly - Chain (HCT)

EXA-1000

Linear Omni-Directional Remote Antenna (AAE00198)

The EXA-1000 is a 1/2 wave center fed vertical antenna composed of three parts: an Antenna assembly with an F connector attachment; a Base Plate assembly with radial mounting provisions; and a five-foot 75-ohm coaxial cable.
The cable connects to the antenna base on one end and the receivers F connector on the other.
If the antenna must be mounted further than five feet from the receiver an extension cable of up to a maximum of 25 feet may be used instead of the five foot cable supplied.
Because of the cable resistance the performance of the EXA-1000 may be degraded by using longer than a 25 foot cable
Compatible with all Linear receivers with Type F antenna connector
Receives signals in 288 to 320 MHz range

.......more details

Installation manual

F3100MBC

Linear Wireless Keypad with Intercom Estate Series *** No Longer Available

Increased Surveillance: Screen visitors and solicitors safely from inside your home
Superior Range: Crystal clear two-way wireless communication up to 500 ft. (152.4 m) without any obstructions
Stand Alone Keypad: Program up to 100 entry codes for added security
Motion activated backlit keypad
Kit includes 1 base station with rechargeable battery

620-100991

Linear Heater Kit Assembly 460V Cage Style

Cage style heater is suited for large post mount operators (HSLG GSLG VS-GSLG SWG VS-SWG)

GSLG-A-143

Linear Commercial Slide Gate Operator 1 HP 460V 3 Ph - Heater not Included

Integral APeX Controller three-button control station
Variable speed settings- Up to 24" per second (soft start / stop)
Programmable speed control
Direct C-face drive with brake
Power on/off switch
#50 roller drive chain and sprockets

.......more details

DXT-21

Linear 2-Btn 1-Channel Handheld Transmitter 315 MHz *** No Longer Available

A battery powered portable transmitter designed for use with Linear’s DX Format receivers.
Each transmitter can be used in a limitless number of wireless remote control applications.
Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver
The digital DX code format features over a million possible codes.
The DX transmitters are precoded at the factory to unique codes so no field coding is required
Powered by two 3-Volt #2032 lithium batteries included

.......more details

Installation Manual

109710

Linear 4-Channel Multi-Code Visor Transmitter 310 MHz

Open/Close remote for 4 doors
Compatible with 310 MHz Stanley and Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches - 10 dip switches
Power: 9-volt battery
Codes: 512 per channel (set by dip switches)

.......more details

Programming Instructions

412001

Linear 2-Channel Multi-Code Visor Transmitter 300 MHz

Compatible with 300 MHz Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches
Power: 9-volt battery
Codes: 1024 (set by dip switches)
RF frequency: 300 MHz

.......more details

Installation Manual

2500-2346-LP

Linear Plug-In Loop Detector LP PVT LBL *** No Longer Available Refer the ULT-PLG-D-TEK

Programming instructions

DRQP

Linear 1-Channel Delta3 Gate Receiver 310 MHz *** No Longer Available

1-Channel Gate Receiver
High-sensitivity short-range radio receiver
Operates in conjunction with the 9-inch local antenna (supplied).
Designed for use with automatic gate operators or systems where a remote antenna is needed.
Same as: DNR00013P

Installation Manual

DR2

Linear 2-Channel Delta3 Receiver 310 MHz *** No Longer Available

Activates two devices
Wire lead antenna
12 and 24 Volt models
Two-channel wireless radio control designed for use with automatic garage/gate operators and access control systems.
The receiver can be activated by any of the Delta-3 format transmitters
Mounting bracket supplied

.......more details

Installation Manual

AK-21W

Linear Exterior Digital Keypad *** No Longer Available

A digital keyless entry system designed for outdoor access control applications.
The keypad is housed in a rugged die-cast metal enclosure and is designed to be mounted in a standard single-gang electrical box.
The die-cast keys have bright easy-to-read yellow graphics.
Up to 480 entry codes from 1 to 6 digits in length can be programmed. They can activate either or both of the relay outputs.
Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for timed or latch-on/latch-off toggle operation per each individual entry code

Installation Manual

AKR-1

Linear Exterior Digital Keypad with Radio (ACP00747) *** No Longer Available

Self-contained keyless entry system ideal for airports hospitals warehouses office buildings parking lots and many other commercial facilities
Built-in radio receiver
Rugged cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestal
Four independent outputs and timers: two form C relays and two solid-state open collector outputs with unique programming per entry code
Accepts 480 entry codes 480 block code transmitters plus one fully supervised Model MGT safety edge transmitter
Two LED indicators show system status

.......more details