Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
BCSI-PM20

Pivin Drapeau Sprocket 50B12 *** Price by Quote Only

BCSI-PM02

Pivin Drapeau Bearing 1" FL205 *** Price by Quote Only

BCSI-PM07

Pivin Drapeau Lock Washer 3/8" *** Price by Quote Only

BCSI-PM17

Pivin Drapeau Secondary Shaft *** Price by Quote Only

BCSI-PM18

Pivin Drapeau Retaining Ring *** Price by Quote Only

SHAFT048

Manaras Trolley Output Shaft

MCB-DR-SH-ASSY

Lynx Clutch/Drive Shaft Assembly MCB 3/4" x 11-3/4"

  • For trolley operator
10TD900HH3

BEA 3-Button Transmitter 900 MHz

  • Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
  • It also provides better penetration of obstacles.
  • Operating temperature: -10 to 55C
  • IP65
HAE00087

Linear Safety Beam Sender & Receiver with Wire

  • Set includes: Sender and Receiver photocells wire and connectors
  • Safety beams will work with all Linear operators that currently have safety beams installed.
  • Replaced HAE00002
GAREX-PAINT-IRN-ORE

Garex Touch-Up Paint Iron Ore

B/CDJH-34-115-UL

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V w/ ECB and Solenoid Brake Right Hand UL325

  • 3 Button station (NEMA 1) Photoeyes 1-Btn Transmitter
  • 1650 RPM high starting torque motor with overload protection
  • Inherent Mechanical Brake (I.M.B)
  • B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
  • On board Open Close & Stop for ease of setting limits
  • Pre-wired to accept sensing devices
    • .......more details
D-TEK-LP

EMX Industries Low Voltage 11-Pin Single Channel - Dual Relay Loop Detector (2500-1)

  • Power Supply: 12-24 Volts AC/DC
  • Current Consumption: < 9 mA
  • Operating Temp: -40°F to 180°F
  • Surge Protection: Zener Diode /MOV
  • Output Relays (2): 1Amp 30 VDC
  • Loop Input: Transformer isolation lightning and transient protection (1)
    • .......more details
Manual - LP-D-TEKSpec Sheet - LP-D-TEK
K21-16699

LiftMaster Transformer 120/240V 75VA 24VAC

  • For use with various LiftMaster® Speed Jack Commercial Door Operators
SHAKER-R16

Garex Ready to Install Door Special Order

  • Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)
  • Panel Height: 18 21 and 24 inches (45 53 and 60 cm)
  • Panel Width: Up to 24 feet (732 m)
  • Texture: Woodgrain
  • Offered in various choices of colours
MGH-6534-M-N1-LH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
OSH-6234-M-N1-LH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
K41-0372-999

LiftMaster Drive Sprocket Chain Repair Kit

  • Repair Kit to correct quality issue with TDC1200 & 2200 Maxum trolley openers
  • MAXUM CDO SKUs affected TDC7S1BMC TDC7S4BMC TDC12S1BMC TDC12S4BMC TDC12X1BMC TDC12X4BMC
29201

Doorlec Transformer 460V pr 120V sec 35VA

  • 460V prImary 120V secondary 35VA
OSH-6234-M-N1-RH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes RH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
CDJH-12-115-CONT

Lynx CDJH Heavy-Duty Jackshaft 1/2 HP 115V Contactor Model

  • Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
  • 4L V-belt primary reduction #41 drive chain and sprockets.
  • Adjustable friction clutch Inherent Mechanical Brake included
  • Solenoid brake optional **
  • Fully driven adjustable limit switches.
  • Heavy duty 3 button wall station (Open Close Stop).
    • .......more details
GALV-273-2-R

Cut-to-Length Torsion Spring .273 x 2" Right Hand Wound Galvanized Orange/Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
GALV-393-6-R

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Galvanized Orange Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized
GALV-393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Galvanized Orange Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized
GALV-375-334-R

Cut-to-Length Torsion Spring .375 x 3-3/4" Right Hand Wound Galvanized Yellow/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-375-334-L

Cut-to-Length Torsion Spring .375 x 3-3/4" Left Hand Wound Galvanized Yellow/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-343-258-R

Cut-to-Length Torsion Spring .343 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-343-258-L

Cut-to-Length Torsion Spring .343 x 2-5/8" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-331-334-R

Cut-to-Length Torsion Spring .331 x 3-3/4" Right Hand Wound Galvanized Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-331-334-L

Cut-to-Length Torsion Spring .331 x 3-3/4" Left Hand Wound Galvanized Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-331-258-L

Cut-to-Length Torsion Spring .331 x 2-5/8" Left Hand Wound Galvanized Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
  • Galvanized
GALV-319-334-R

Cut-to-Length Torsion Spring .319 x 3-3/4" Right Hand Wound Galvanized Blue/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-312-258-R

Cut-to-Length Torsion Spring .312 x 2-5/8" Right Hand Wound Galvanized Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
  • Galvanized
GALV-306-334-L

Cut-to-Length Torsion Spring .306 x 3-3/4" Left Hand Wound Galvanized Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
GALV-283-334-L

Cut-to-Length Torsion Spring .283 x 3-3/4" Left Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
GALV-283-258-L

Cut-to-Length Torsion Spring .283 x 2-5/8" Left Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-250-258-L

Cut-to-Length Torsion Spring .250 x 2-5/8" Left Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
99000568-PER-FT

Amarr Bottom U-Seal 3.5" Gray Vinyl 1/4" T Sold per Foot

  • 1/4" T width
  • Used on Strat 3000 Herit 3000 and Commercial (exceot 1350 & 2700)
GALV-273-334-L

Cut-to-Length Torsion Spring .273 x 3-3/4" Left Hand Wound Galvanized Orange/Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
10FALCON-EXXL100

BEA Falcon Motion Detector w/Exp Proof Housing 100ft Cable Mount 6.5' to 11.5'

  • FALCON EX combines a microwave activation sensor with an explosion-proof / flame-proof housing
  • Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
  • FALCON EX can be mounted from 6.5' to 11.5' to fit any industrial application.
  • Nema4/IP66
  • Detection Zone: Falcon EX XL: 13’ × 6 ½’ @ 8 1⁄5’
  • Oerating termperature: -22-140F
    • .......more details
DOCK-SEAL-R100

Dock Seal R-100 Fixed Header Seal Price by Quote Only

  • Made to order - Price varies according to specifics
  • This model is ideal for door openings of 8′ wide x 8′ high
  • Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
  • 40 Oz Vinyl
  • Comes with full height yellow guide strips and option for wear flaps
  • Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time
    • .......more details
210339

Skylink Belt Gear with Holder LQ-803

DOCK-SEAL-R600

Dock Seal R-600 Adjustable Curtain Seal Price by Quote Only

  • Made to order - Price varies according to specifics
  • This model is ideal for door openings of 8′ wide x 10′ high
  • Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
  • 40 Oz Vinyl
  • Comes with full height yellow guide strips and option for wear flaps
  • Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time
    • .......more details
R-600 Order FormCatalogue
GALV-262-334-R

Cut-to-Length Torsion Spring .262 x 3-3/4" Right Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
GALV-243-258-L

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-243-258-R

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
041D8993

LiftMaster Cover Silver 8365W 83650-267

  • Replacement LiftMaster® Cover.
  • Compatible with various LiftMaster® 8365W Series WiFi® AC Chain Drive Garage Door Openers; powered by myQ
041-0400-000

LiftMaster Door Shaft Collar

  • Fits with LiftMaster model #98032
2110-700

Linear Idler Assy Large Gate

K41-0391-000

LiftMaster EMI Board 1200 (120VAC/240VAC)

  • For Maxum op
K41-0410-000

LiftMaster 1200 Extended Duty Motor Gear Box Encoder Hoist

  • For Maxum Hoist 1200 Op
K41-0375-000

LiftMaster 24VDC Motor Gear Box Encoder (Jackshaft 1200)

  • Maxum J-1200
K41-0377-000

LiftMaster 24VDC Motor Gear Box Encoder (Trolley 700)

  • Maxum T-700
K41-0374-000

LiftMaster 24VDC Motor Gear Box Encoder (Jackshaft 700)

  • Maxum J-700
GSD103L5R

LiftMaster Heavy Ind-Duty Slide Operator 1HP 208/230/460VAC 3PH

MI00034

Micanan Pulley 9" OD c/w Bushing 3/4" ID

CHAINTENS125DC

LiftMaster Chain Tensioner 1-1/4" MAXUM DC

  • For use with various LiftMaster® MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators; manufactured after 2023 only.
  • Chain Spreader for Maxum for 1" door shaft
SCREW002

Manaras 1/4"-28 x 1/4" Set Screw

2376.156.17.730

Whiting Torsion assembly .156 wire size 17" spring length 73" shaft

GALV-406-6-144-R

Torsion Spring .406 x 6" x 12ft RH Galvanized Blue/Yellow

  • Wire size: .406
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
2806.206.380

Whiting .206 x 2-3/16 x 38" Roadside with Cones

K41-0253-000

LiftMaster Electric Motor INSL24UL

  • Compatible with LiftMaster® INSL24UL Series Industrial Lite-Duty Slide Gate Operators
CP-MO-34R-123/1

Lynx Electric Motor 3/4 HP-IR 115/230V 1 Ph

  • Electric motor only with instant reverse
GALV-225-2-L

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Galvanized Ornage/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
202-0003

TNR Knock-Away Plate (Lasercut) for 10lb/ft Bottom Bar **** Price by Quote Only

K07-3611

LiftMaster Disconnect Bushing

  • Compatible with LiftMaster® SL590 Slide Gate Operators
E/1907/012

BLG76 Backup Spring Assembly

E/0172/166

Automatic Systems Spring Assembly

RGH-6214-MON-RH

Manaras 1 HP 240V 1Ph Rapido Gear Head Op. Monitored ECB Right Hand

  • Rapido version of model OGH
  • Includes PHOTO-061 Monitored N4X Thru-Beam eyes
PL-A26-LENS

Lynx Front Light Lens LPL 455+

K41-0241-000

LiftMaster Transformer for IHSL24UL

  • Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators
CA-129-512

Continuous Angle 1-1/2" x 5-1/2" x 129" L Sold as a PAIR

GS-RA-01-BLACK

Guide Seal Reverse Angle Black Sold by the Foot

41D3485

LiftMaster Chain Kit 10'

  • For use with various chain drive garage door openers that utilize a T-rail and have a 10' garage door
  • Same as 041D3485
E/1929/023

Automatic Systems Balance Spring Ass'y 5.5 MM BL229

  • Used on the BL229 gate op.
OSH-6114-M-N1-LH

Manaras Opera-SH 1 HP 120V 1 Ph Monitored w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
MODKIT027

Manaras Universal Aux. Output Module B060 Field Install

  • MODKIT027 for field install simply plugs into the control board
  • Controls several auxiliary devices such as Strobe horn fan lights etc
  • Works with BOARD060
  • Can only be used on operators with BOARD060 pre-installed for operators built prior to October 14 2010.
10PBR45LL

Push Plate S/S 4.5" Round Large Logo

  • Compatible with 900 433 and 300mhz.
  • May be hardwired to the operator or connected to BEA transmitters.
10TD900TR

Transmitter 900mhz Touchless Wireless Converter

  • Allows wireless door activation without the need to run additional wires to easily change existing door configurations from hardwired push plates to touchless door actuators.
  • Microwave doppler technology allows for consistent and reliable detection.
  • For automatic door apllications.
  • Compatible with 10RD900 and 10BR2900 receivers.
  • IP65
  • Nema 4
    • .......more details
CAPXSTKPL

LiftMaster Trim Kit with Postal Lock for CAPXS

  • Trim plate with integrated postal lock cover exclusively for installing with Model CAPXS – Smart Video Intercom S
  • Pre-Wiring included for postal lock device (not included).
  • Provides a clean aesthetic installation when the application calls for a postal lock while also helping hide remnants of a previous installation
  • Dimensions: 14” x 6.5” x 1.4”
CAPXSTK

LiftMaster Trim Kit for CAPXS

  • Trim plate exclusively for installing with Model CAPXS – Smart Video Intercom S
  • Provides a clean aesthetic installation helping hide remnants of a previous installation.
E14400M

Cable Tie KSPEC 40 LB Black 14" Nylon 1000/pkg

  • Length: 14" Width: 3.6MM (0.140")
  • Low insertion and pull through force
  • Advanced pawl and teeth design
  • Angled tail provides quicker initial insertion alignment
  • Tail finger grips allow easier handling and tightening
  • Rounded edges provide added safety and eliminate insulation damage
    • .......more details
GHW-383-1HP-RH

Doorlec Industrial Gear Head Door Operator 1 HP 208V 3P with ECB and Nema4 modification

  • Extra heavy-duty industrial-type electric door operator for damp environments.
  • Worm gear reducer 40:1 ratio
  • #50 roller chain and sprockets from operator shaft to door shaft. (#60 chain optional)
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter (also called friction clutch)
  • Rotary type limit switches
    • .......more details
WA7102

MBAR Security Key for Manual Over-Ride (1 Key)

GUSSET-MOUNT

Doorlec Gusset Mount Plate Up-Charge (L Bracket) GH

  • Mounting plate for GH op
OSH-6434-M-N1-LH

Manaras Opera-SH 1 HP 480V 3 Ph Monitored Board w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
PRO-GH-10023U-L

Micanan 1 HP 230V 3P Gearhead Op. N1 Eyes Monitored ECB Left Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
31373-114

Doorlec Sprocket 60B36 1-1/4" Bore

31369-114

Doorlec Sprocket 60B12 1-1/4" Bore

K77-38121

LiftMaster Wiring Harness SL585U SL595U

  • Compatible with LiftMaster® Models SL585U and SL595U Slide Gate Operators
K79-13493B-500

LiftMaster Logic Control Board Assembly (FDO FCC LMPLC 500V CHIP)

  • For use with various LiftMaster® Commercial Door Operator Models
158176

Set Screw 3/8-16-1 Cup Point Zinc Plated Red Head

MD00128

Micanan #410 Roller Chain 27 Pitch c/w Connecting Link

K004-KEY

Replacement Key for 3BXLT Key #4

  • Replacement key only for key #K004
15-50B72QGH

Sprocket 72 Teeth 1-1/4" Bore 1/4" Keyway

  • For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators
E/1929/094

Automatic Systems Left Bumper Ass'y (BL229)

  • Used on the BL229 gate op.
GHW-353-3HP-RH

Doorlec Ind. Duty Jackshaft Carwash Op. 3 HP 575V 3P Right Hand *** By Quote Only

  • With DC2000 logic board
  • Worm-Gear Jackshaft type Industrial operator NEMA 4/12
SPR410B12X5/8

Sprocket 410B12 x 5/8 K3/16 2S1/4-20

CGH155L5-RH

LiftMaster Gearhead with Carwash Mod and Brake 1-1/2 HP 575V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
OTBH-6113-AM05

Manaras Trolley Operator 3/4 HP 120V Monitored Board w/Eyes Apt. Model

  • The OTBH model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
  • 100 cycles per day
  • It incorporates a drum-shoe type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • #41 full roller chain
  • Includes monitored N4X eyes (PHOTO 061)
    • .......more details