Devanco Canada - Get The Right Garage Door Opener‎ and Parts

CPT215-END-KIT-T3

Miller Edge End Kit for CPT215 Doide Capacitor (T3) Configuration

Kit contains: 2) Caps (2) cages (1) wired plug (1) diode capacitor plug (1) non-mon. plug (2) screws

GALV-273-334-R

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

K23-34822

LiftMaster Open/Close Switch

For use with various LiftMaster® Commercial Slide Gate Operator Control Boxes

3228.3

Whiting 2" Nylon Roller 3" Stainless Steel Shaft

This is a Whiting original roller

MWT12B

Miller Edge Transmitter Binary Nema 4 Enclosure

The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
Response time: 70 milliseconds

.......more details

Installation Instructions MWT12B Spec Sheet MWT12B FAQ MWT12B

DOCK-SEAL-R600

Dock Seal R-600 Adjustable Curtain Seal Price by Quote Only

Made to order - Price varies according to specifics
This model is ideal for door openings of 8′ wide x 10′ high
Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
40 Oz Vinyl
Comes with full height yellow guide strips and option for wear flaps
Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time

.......more details

R-600 Order Form Catalogue Installation Instructions

GALV-262-334-L

Cut-to-Length Torsion Spring .262 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

K41-0378-000

LiftMaster 24VDC Motor Gear Box Encoder (Trolley 1200)

Maxum T-1200

CP-PU-AWNING-1

Lynx Awning Pulley 1" MCJH

19-40010-SS

LiftMaster Roller Chain #40 Stainless Steel 10ft/pk

10ft length

GX-200-MG

Garex Ready to Install Door Multi-Grooved Special Order

21" panel = 4 grooves 24" panel= 5 grooves
COMPLETE JOINT SEAL No air circulation between the panel sections eliminating thermal bridges.
Minimize the heat transfer between the inside and outside of your garage.
LIGHTWEIGHT AND ROBUST PANEL Polyurethane foam insulation pressure injected between the interior/exterior faces
WOOD END BLOCKS Suitable to receive steel end caps
HIGH-PERFORMANCE DESIGN Flexible rubber inserted into a PVC reinforced moulding offering a tightly sealed fit to the floor

.......more details

DWI-LOCK

Doorway Impact Monitored Slide Slock V2

Monitored Slide Lock for the DoorWay Impact Sensor (Impact sensor and air switch not included)
Connects to an Air/Impact switch to mechanically and electrically lock the door.

SPBCU1

NICE MBAR/LBAR R10 Logic Control Board

E/0172/166

Automatic Systems Spring Assembly

2200-983-UPS

Linear Brake and Puck Assembly UPS HSLG

50018

Doorlec Photo Switch Polarized Explosion Proof Reflective w/Round Reflector

Class 1 Div 1 Groupes CDEFG explosion proof Certified CSA

31369-114

Doorlec Sprocket 60B12 1-1/4" Bore

K77-38121

LiftMaster Wiring Harness SL585U SL595U

Compatible with LiftMaster® Models SL585U and SL595U Slide Gate Operators

31373-114

Doorlec Sprocket 60B36 1-1/4" Bore

158176

Set Screw 3/8-16-1 Cup Point Zinc Plated Red Head

RSH-6814-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes Right Hand

High speed heavy-duty v-belt drive industrial operator.
Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
Two times the speed of the standard jackshaft operator
Manages soft-starts and soft-stops
Can be wall or shelf mounted on either side of the door
Cast iron pillow block bearings

.......more details

MQ00002

Micanan Cotter Pin 1/8" x 2.5" Long

2704.177_13.5

Whiting Roadside Torsion Spring 2-3/16" ID 13-1/2" Long

Torsion spring wire only
.177 wire size

2705.177_13.5

Whiting Curbside Torsion Spring 2-3/16" ID 13-1/2" Long

Torsion spring wire only
.177 wire size

19-5010-SS

Roller Chain #50 Stainless Steel w/Connecting Link 10ft Length

SB3381-PAIR

Garex End Bearing Plate 3-3/8" - 1" Commercial Sold as a Pair

TDC1222-16

Liftmaster Comm. 16FT Trolley Angle set (10-5816-P x 2) and #41 chain pack (TDC41-16) ***Actual length 227"***

Double Angle Rails for doors up to 16'6" high
Includes #41 chain pack

TDC1222-18

Liftmaster Comm. 18FT Trolley Angle set (10-5818-P x 2) and #41 chain pack (TDC41-18) ***Actual length 251"***

Double Angle Rails for doors up to 18'6" high
Includes #41 chain pack

TDC7-16

Liftmaster Comm. 16FT Trolley Angle set (10-5816-P x 2) and #48 chain pack (TDC48-16) ***Actual length 227"***

Double Angle Rails for doors up to 16'6" high
Includes #48 chain pack

HW0777

Low Headroom Quick Close Device 3" track Sold as a Pair

Includes 1 RH & 1 LH bracket
Heavy Duty for doors up to 16' x 16'

Specification Sheet

400-CBAC-EG-115V

FAAC 1042011277 Long (EG) Gate Arm w/Positive Stops 50-1/2" L *** Price by Quote Only

400 CBAC EG Long Arm with positive stops
For hydraulic Swing Gate Operator
This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system

400-CBAC-STD-115V

FAAC Standard Gate Arm w/Positive Stops 40-1/2" L *** Price by Quote Only

400 CBAC Standard (Short) Arm with positive stops 40-1/2" tip-to-tip
Replacement arm for hydraulic Swing Gate Operator 10420112.5
This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system
Dimensions: 40.5 x 3.35 x 3.35

041C0010

LiftMaster Chain Spreader 3/4hp

For use with various LiftMaster® and Chamberlain® 3/4 HP Chain Drive Garage Door Openers

GALV-295-6-144-L

Torsion Spring .295 x 6" x 12ft LH Galvanized Blue

Wire size: .295
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

41B5348-2

LiftMaster Socket and Hub Kit 8360/8360W

Compatible with LiftMaster® Models 8360/8360W Chain Drive Garage Door Openers

CGH205L5-RH

LiftMaster Gearhead with Brake & Carwash Mod. 2 HP 575V 3P L5 Right Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

GALV-343-258-144-L

Torsion Spring .343 x 2-5/8" x 12ft LH Galvanized Blue/Red

Wire size: .343
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

GALV-331-334-144-R

Torsion Spring .331 x 3-3/4" x 12ft RH Galvanized Red/White

Wire size: .331
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-312-258-144-R

Torsion Spring .312 x 2-5/8" x 12ft RH Galvanized Yellow

Wire size: .312
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

GALV-306-258-144-R

Torsion Spring .306 x 2-5/8" x 12ft RH Galvanized Red

Wire size: .306
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-273-334-144-L

Torsion Spring .273 x 3-3/4" x 12ft LH Galvanized Orange/Red

Wire size: .273
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-250-334-144-L

Torsion Spring .250 x 3-3/4" x 12ft LH Galvanized Green

Wire size: .250
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-243-258-144-L

Torsion Spring .243 x 2-5/8" x 12ft LH Galvanized White/Yellow

Wire size: .243
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-225-2-144-RH

Torsion Spring .225 x 2" x 12ft RH Galvanized Orange/Green

Wire size: .225
Inside diameter: 2"
Length: 12 ft
Galvanized

PUSH185

Manaras Contact Block NC XB5

HRD-288-1

EMX Universal Mounting Bracket L-Shape Black Sold per Piece

Fits RET2 MON2 4X2 WEL-RX REFLECTOR-O-EX models

CAMPLATE019

Manaras Cam Plate Opera C-Box

BPFL205

Bearing Flangette Retainer Only PFL-205 2 pieces 2-Hole

Does not include bearing
Steel Zinc plated finish

2200-555

Linear Sprocket 40A48 Machined

2100-1661

Linear Plate Torque Limiter VS/GSLG-A

2400-501

Linear Retaining Ring

2200-042

Linear Sprocket 48B15 1" Bore

MPB-3

Doorlec Open Mushroom Stop Lockable Close Push Button Station

Green (Open) Red (Mushroom Stop) Black (Close) push-button station

29120

Doorlec Transformer 120V pr 28 V. sec. 50VA

120V primary 28 V secondary 50VA

GEAR001

Manaras Bevel Gear GH/MGH 5/8" 20 Tooth

26141

Doorlec Cam Shaft 9-1/4" x 5/8" (24 x 1.59cm)

Fits the older smaller boxes

2BXT

Exterior 2-btn O/C Nema-4 Pushbutton Control Station Non-Metallic

Surface mount
Non-Metallic
Open / Close

Installation Manual 2BXT

SPR410B12X1

Sprocket 410B12 x K1/4 2S 5/16-18 PH1/4

SD103L5-LH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 208/230/460 3PH Left Hand (Must include hardware box)

Perfect for split and sliding doors involved with industrial applications.
It is installed above the door and corresponds with the direction the door will be traveling.
Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
Built In Security+ 2.0 radio receiver
Solenoid brake included

.......more details

OTBH-6232-AM05

Manaras Trolley Operator 1/2 HP 208V 3Ph Monitored Board w/Eyes Apt. Model

The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
#41 full roller chain
Includes monitored N4X eyes (PHOTO 061)

.......more details

31369

Doorlec Sprocket 60B12 1" Bore

2200-968-UPS

Linear Sprocket 40B22 1" Oxided UPS

2200-309

Linear Double Pulley 7" 5/8" Bore

NINJA-001-BLACK

Rodent Ninja Garage Door Corner Guard Set

Blocks pests from entry
Fills in holes and gaps along garage door frame
Keeps insects mice and unwanted guests outdoors
Kit includes: (1) Right and (1) Left handed Garage Door Corner Guard (6) Self-tapping Screws
Made in the USA

1104-16FT-CHI-CRM

Residential Side & Top PVC Weather-Strip with cap 16' Long - CHI Cream (C-C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
CHI compatible colour

E/BLOP/130

Automatic Systems Kit for Breakaway Arm BL229 Option ** Price by Quote Only

This is an option for the BL229 arm

GALV-312-334-144-L

Torsion Spring .312 x 3-3/4" x 12ft LH Galvanized Yellow

Wire size: .312
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

15265

Whiting Rear Frame Conversion - 7" Header 2.5" Posts

An add-on option only. Price by Quote

227653

Linear Sprocket

HCI Drive Sprocket

400BL

4" Light Brush Insert 6ft Long

Polypropylene bristles

GALV-363-6-144-L

Torsion Spring .363 x 6" x 12ft LH Galvanized Green/White

Wire size: .363
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

GALV-363-334-144-L

Torsion Spring .363 x 3-3/4" x 12ft LH Galvanized Green/White

Wire size: .363
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-218-2-144-R

Torsion Spring .218 x 2" x 12ft RH Galvanized Yellow/Orange

Wire size: .218
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-363-334-L

Cut-to-Length Torsion Spring .363 x 3-3/4" Left Hand Wound Galvanized Green/White Price per Inch

Priced per inch - cones sold separately
For factory installed cones use part no. C-375-INSTALLED

GALV-295-334-L

Cut-to-Length Torsion Spring .295 x 3-3/4" Left Hand Wound Galvanized Blue Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

GALV-262-258-R

Cut-to-Length Torsion Spring .262 x 2-5/8" Right Hand Wound Galvanized Red/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-243-2-L

Cut-to-Length Torsion Spring .243 x 2" Left Hand Wound Galvanized White/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-207-2-L

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Galvanized Brown Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-218-2-L

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Galvanized Yellow/Orange Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GEAR014

Manaras Disconnect Bevel Gear 5/8" 20 Tooth OGH

RS36203

Roller 3" Steel Roller Head Only Heavy-Duty 6203 Bearing 5/8"

Steel Roller Wheel diameter: 3"-C 6203 bearing
Roller Head Only

1326-134-BLK-PLEXI

Elton Commercial Window 1-3/4" thick 1326 Black Frame Sealed Plexi Glass

Screw together window kit
Frame size: 26-1/8" x 13-9/16" (Tip to Tip)
Cut-out size: 25-1/16" x 12-9/16"
Vision area: 23-7/16" x 10-13/16" Corner Cut 4" Radius
Different glass options and frame colours are available upon request

FM145

Nortek Mighty Mule Pedestrian Gate Lock Bulldog

Bulldog Pedestrian Gate Lock secures walk-through gates in a locked position.
The Bulldog lock is mounted horizontally and it locks the swinging pedestrian gate to a post or column

K79-13493A-300

LiftMaster FDOA Control Board LMPLC

Also known as: K29-FDOA-300
For use with various LiftMaster® Commercial Fire Door Operators

GAREX-PAINT-SBL

Garex Touch-Up Paint Sable

GAREX-PAINT-R12-WHTE

Garex Touch-Up Paint White for R12

OSH-6212-M-N1-RH

Manaras Opera-SH 1/2 HP 240V 1Ph Monitored w/N1 Eyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual

2704.148_140

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 14" Long

Most common torsion spring for cube trucks
Specs: .148 x 2-3/16" x 14" Long
For Curbside order part # 2705.148*140

BEA-10-MINI-BRKT

BEA Mini Industrial Bracket Adjustable 6-12 "

Adjustable from 6 - 12 inches (up to 4" maybe cut off for shorter applications)
12" x 2.5" Mounting Face
Fasteners NOT Included
Carbon Steel Black Powder Coated

Installation Guide

2705.143_150

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 15" Long Galvanized

torsion spring for cube trucks with small roll-up door
Specs: .143 x 2-3/16" x 15" Long
For Roadside order part # 2704.143*150

E/1929/069

Automatic Systems Round Arm Ass'y 13' (BL229)

Used on the BL229 gate op.

65-5501-16

LiftMaster Bi-Parting Mod Kit 16ft (Includes 19-5124 Chain #41 for 24ft Door and 10-5820-P Track for 20ft Door ***Actual length 275"***

Includes: 65-5501 Bi-Parting 19-5124 Chain #41 for 24ft Door 10-5820-P Track for 20ft Door

SA1929/A51

Automatic Systems Board w/Battery Assy for BL229

50690-2

Doorlec Clutch Assembly for ETBH w/Double V-Belt

CG-HOIST-SINGLE-1

ControlGard Chain Hoist Single Compound 1" Bore

Cornell Single Compound hoists are designed for smaller doors
Features an integral braking system that only moves when the user is actively pulling the chain

BEARING007

Manaras Flange Bearing ID 1"

Flange bearing for 1" shaft

10TD900INDHH4

BEA 4-Button Digital Transmitter Nema 4 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
IP65
Operating temperature: -10 to 55C
Controls one 10RD900 receiver

OGH-6533-M-N1-RH

Manaras 3/4 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details