Devanco Canada - Get The Right Garage Door Opener‎ and Parts

7232

Whiting Spring Spacer 38-1/4" Long for 2-5/8" ID Spring Wire

For use with #7176 balancer

CHAIN036

Manaras Jackshaft Drive Chain #60 - 1R10'

Includes 1 chain link

.375-6-R

Cut-to-Length Torsion Spring .375 x 6" Right Hand Wound Yellow/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

26CW942255-CUT

Truck Door Bottom Panel with Hardware (15.5" x Cut-To-Size Painted White for Whiting Dryfreight

These panels are cut to customer's specifications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes with pull strap two bottom roller shaft covers stud plates standard lift handle seal & retainer

.......more details

9234001.003

Overhead Clutch Shaft Assembly with Double Pulley SFL

DM54LC-COATED

Special ends 2023-07-31

Cable Drum High Lift 54" 400-54HL Specialty Coated Pair

Use for Commercial Highlift Doors
Maximum Door Height 120" + Highlift
Maximum Highlift 54"
Lifting Weight Per Drum 275 lbs.
Resists Chemical/Moisture Corrosion
Abrasion Resistant

.......more details

MWT12

Miller Edge Transmitter RF in Nema 4 Enclosure

The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
Response time: nominal 30msec.

.......more details

PRO-GH-7511U-R

Micanan 3/4HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

GM-809

Gear Master

Holds shaft assembly for easy removal of roll pins
Makes changing gears easy

41D96-1

LiftMaster Light Lens for 8500

Also known as: 108D96-1 41D96-1 108D0096-1

MA024RDOT

LiftMaster White Aluminum Arm with Retro-Reflective DOT Tape 12 ft

For use on Mega-Arm gate operator
Red White reflective DOT stripe

Additional arm accessories

MK-00398

Micanan Capacitor 370V 20 Mf

For limited duty 220V operators

9281431440

Spring Wire .289 x 2.625 x 144" Coated RAW RH

.289 x 2-5/8" x 12'

MOTOR254

Manaras Electric Motor 1/2HP 120/240V 1PH

Continuous-duty base mount 60Hz
This item is compatible with BRAKE011

2806.192.340

Whiting .192 x 2-3/16 x 34" Roadside with Cones

MU22-2WIRE-E-G

Miller Edge MU22 2-Wire End Gray - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

12131

Doorlec Brake Disc 4" x 5/8" Keyway

Fits Doorlec model SGOH

MW-00050

Micanan In-Line Torque Clutch Assembly (MP00232)

Friction clutch mounted in between motor and reducer flange
Comes with cover and studs
New part number MP00232

PRO-HHD-7553U-L

Micanan 3/4HP 575V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

3/4 HP575V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation manual Specification sheet

MM00013

Micanan Chain Guard (MM00431)

Fits PRO-H/HB
New part number # MM00431

41C5141-1

LiftMaster Square Rail Trolley Kit Chain Drive

Same as: 062313 41C5141 41C5141-1
Compatible with all Chamberlain and Craftsman square rail chain drive models

CB53205000-KOR

Cable 5/32" 7x19 5000' Galvanized Supreme ** Price on request

Galvanized cable 5/32" 7x19 5000ft spool.
Cable break strength: 2800 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

K32-10540

LiftMaster Gear Reducer 20:1 SL595

Same as 32-10540 32-55011 32-5501-1 G3255011

CABLE_1/4SS-250

Cable 1/4" 7x19 250' Stainless Steel

CT751L5

LiftMaster 3/4HP 115/230 Volt 1Ph Com. Trolley Operator with Carwash Mod

New Logic 5
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

E3JM-30FT

Omron Thru-Beam Photoelectric Sensor Nema 4 0-30ft Range

Easy-to-wire terminal block
Built-in timer offers selectable ON-delay OFF-delay and one-shot
Relay or transistor output models
Light-ON/Dark-ON operation switch selectable
Model: E3JM-10M4-US

BL-BAG-1A

Barlock Hardware Bag Only for Doors 12ft and Under

Does NOT include the locking bars
Up to and including 12ft
Kit includes lock spacers and fastereners

Assembly Manual

38066R

Genie Series II Intellicode Wall Console GBWC2-BX ** Disc. replaced by 39165R

Series II Multi-Function Wall Console (White Color)
Vacation Lock button disables remote access
Light Control Button
This item has been discontinued and replaced by #39165R

9723-48

Whiting Pull Strap 48" with Steel Retainer

48" long

BOARD075M

Manaras Replacement Board Kit (Monitoring)

Includes BOARD70MR and BOARD66R
On-board 390MHz radio receiver accepts 50 remote controls

25-60007

Truck Door W-Style End Hinge Pin Package Set 50/Pkg

Pin packaged set consists of 50 x 1/4" pins only
Steel construction Zinc plated

37302R

Genie C-Channel Belt Extension Kit for Silent Max and Quiet Lift models ** Price by Quote Only

The extension kit for C-channel belt drive garage door opener rails is to be used in addition to a 7' (3-piece) chain rail to accommodate an 8' high door
For Genie silent max 1000 and quiet lift 1200 belt-drive garage door openers only

RESET008

Manaras Resettable Overload Fuse 11A 1 Phase

38072020

Tie Down Chain Assembly GR 70 5/16" x 20' Hook / Hook

Boron manganese steel heat treated chain
Hook on both ends
WLL LBS : 4700

MT-2B

Linear 2-btn MegaCode Block Coded Transmitter 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Operate LED
Visor clip included
Sold in lots of 10
Power: 9-volt battery

.......more details

029-98105

T-Style Replacement Door White Stainless Steel Package 029-98105

Replacement door size between 72"- 98" wide x 100.25-105" high
Painted white
Stainless steel package
Includes Hinges Rollers and Cable

TRACK-SET-2"LH

2" Tracks Set 7'-0" Low Headroom 1-3/4" Door Clips for Wood Frame R12 Torsion

ER294-K

Heddolf Long Range Receiver 433 MHz

Up to 1500ft range
Compatible with EX220-1K

8360WLB

LiftMaster 3/4 HP DC Premium Series Chain Drive Wi-Fi Lock with BBU Capability **To extend of inventory

Built-In Wi-Fi® for the easiest way to connect the garage.
Real-Time Alerts indicate the status of the garage door via email or push notifications.
Monitor and Control the opener from anywhere using mobile devices.
Consume up to 75% less power in standby mode.
Soft Start/Stop for smooth operation.
Safeguard your household with Security+ 2.0™-with every click a new code is sent to the Garage Door Opener so the door opens only for you.

.......more details

21702

Doorlec Close Auxiliary Switch Double Limit DAT

8X118-WHITE

Fasteners Wood Screws painted White 1000/Box

Ideal for residential weatherstrip

BCH751L5-RH

LiftMaster Hoist Op. with Carwash Mod. and Brake 3/4 HP 115/230 VAC Logic 5 Right Hand ***Replaced by CRBH751L5-RH

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with either CPS-UN4
Brake installed on operator

Installation manual Manuel d'installation Sell sheet Brochure

.343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

39438R

Genie Garage Door Opener LED Bulb LEDB1-R 1/Pkg

Unlike other LED and CFL bulbs this bulb will reduce or eliminate radio frequency interference
Uses 10 watts but equivalent to a 60-watt bulb
Works with almost all garage door openers
Lasts up to 25000 hours
Shatter-resistant vibration-resistant
Cold weather rated up to -30C

.......more details

ALUM-508

Aluminum 24" x 100' Spool Sandalwood / Sable # 508

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 508
Reverse side is #431 Bright White

Colour chart

PEDALU72

Aluminum Pedestal Post 72"

Pedestal post with hood
High quality aluminum
72 inches
Dual face-plate allows for easy wire connections

Shop drawing

IRB-MON-RX

EMX Monitored Receiver Board Only

Receiver board only for IRB-MON

TL-36ML-BLUE

LOCTITE Threadlocker Blue 36ML

Medium strength
This product cures fully in 24 hours and can be dissembled with hand tools.
This product is an anaerobic adhesive applied by drops to the threads of fasteners. It then cures to a hard thermoset plastic that locks the threads together.
For metal to metal applications only

19-50106M

Chain # 50x106 (5-1/2') with Master Link

Also known as: 350120 199023
106 links

226-9313

Lithium AA 3.6V Battery

Used in various types of photo eyes

PBTL-3-100

Key ONLY for PBTL-3 Z100 Sold per Key

Cut Key # Z100
Price for 1 key

RBH101L5-RH

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation manual Manuel d'installation Sell sheet

C-514-INSTALLED

Cones 5-1/4" Factory Installed (Pair)

For do-it-yourself installation use part no. SF514U

.343-514-R

Cut-to-Length Torsion Spring .343 x 5-1/4" Right Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-525-INSTALLED
If cones are required a filler must be added use part # FILLER

7001-12-CHARCOL

Commercial Side & Top Weather-Strip 12' Long - Charcoal (H)

Charcoal galvanized steel with charcoal dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

7001-10-CHARCOL

Commercial Side & Top Weather-Strip 10' Long - Charcoal (H)

Charcoal galvanized steel with charcoal dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

0-7530-444

FHP Electric Motor 1/3 HP 110V 1625 RPM Motor A099231

PBTL-3-102

Key ONLY for PBTL-3 Z102 Sold per Key

Cut Key # Z102
Price for 1 key

GAREX-REPL-PANL

Garex Replacement Panel Special Order

Ordered to customer's exact requirements for size and color
Pls call for pricing

K72-13058

LiftMaster Intermediate Shaft Kit APT

Kit contains: Shaft Bearings Roll Pins Washers and Sprockets (41B10 x 3/4" & 41B16 x 3/4")

5001-9-BLACK

Residential Side & Top Weather-Strip 9' Long - Black

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

5001-7-BLACK

Residential Side & Top Weather-Strip 7' Long - Black

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

HTRNB

LiftMaster Heater Kit for AC Pad Mount Gate Operators

Heater kit for pad mount AC gate operators.
Battery bracket NOT included.
Protects system to -40° F and installs on operator frame
Measurements: 6 x 2 3/8 x 3 3/8

28-03190

Truck Door 1" Vert. Track and Right Angle Assbly Roadside (LH) 96.5" Todco Style***To extent of inventory

For Todco style doors
Galvanized steel 14-gauge construction
Includes right angle frame 1" track and operator bracket
Fits doors 72" - 90" high

28-03090

Truck Door 1" Vert. Track and Right Angle Assbly Curbside (RH) 96.5" Todco Style**To extent of inventory

For Todco style doors
Galvanized steel 14-gauge construction
Includes right angle frame 1" track and operator bracket
Fits doors 72" - 90" high

PPLV1-10

LiftMaster Passport Lite 1-Button Visor Remote with Sec+ 2.0 Technology 10/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Sold in a 10 pack

.......more details

Programming instructions Instructions de programmation Sell sheet Brochure

750

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 3/4" (#3PT) 1000/Box ** Indef. delivery

Indented Hex Washer Head
7/16" Head
Max RPM = 2000
#3 point = long cutting edge (less thread)

SF514U-114

Spring Fitting 5-1/4" Pair for 1-1/4" shaft

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding 1-1/4"bore & (1) stationary 1" bore.

SF514U

Spring Fitting 5-1/4" Pair for 1" shaft

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.

801-300-001-00

Equinoxe Long Range Receiver 1-Door 433 MHz Pre-2016 *** To Extent of Inventory

1000 ft range
Old generation - prior to 2016

Programming Instructions Instructions de programmation

201-300-401-00

Equinoxe Long Range Transmitter O/C/S for 8-Doors 433 MHz Pre-2016

Open/Close/Stop remote for 8 doors
Range of approx. 1000ft
A heavy-duty remote for Industrial applications
Old generation- prior to 2016

Programming Instructions Instructions de programmation

L-7-50-0-M

Cable Tie Standard 50 LB Black 7" Nylon 1000/pkg

Ultraviolet Resistant

27-20010

Truck Door Dual-Spring Shaft 96" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
Cross Reference: W #2528

SF375-DUPLEX

Spring Fitting 3-3/4" Stationary Side Only for Duplexing (Short Ear). *** Not Sold As A Pair

To make duplex assemblies you require one pair of SF600 (W & S) and only two SF375-DUPLEX stationary plugs only no need for P375 winding plugs

37516S

Genie Belt only for 8ft Door

Replacement belt only for 8ft door
Fits Genie model Destiny 1200

41A6569

LiftMaster Safety Sensor Mounting Kit

Replacement brackets only for 41A4373A safety eyes

MG00030

Micanan Limit Cam 1/2-20 UNF

Sold seperately. 2 required per operator

MK-00042

Micanan Overload Reset 1-Phase 13 Amps

36451A

Genie Front Idler Assembly 36451A.S *** NLA

Works on ReliaG 800 2022 2024 2042 ReliaG 600 ChainLift BeltLift 1022 1024 and 1042 Series Units

BOLT027

Manaras Hex Bolt 3/8-16 x 1-1/2"

Used on old MJH

CS303-FP-50

EMX Car Sense Direct Burial Sensor Flat Pack 50ft ** Replaced by LRS-FP-50

Lead probe ONLY. Requires the CS303-C-1 detector.
Easy installation above or below ground
Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
Sensitivity display
Single cut installation with flat pack model

NIR-HD

EMX Industries NIR Hood Cover Steel

The hood keeps rain and other debris from distorting or blocking the photo beam.
It also helps to keep the sun from glaring off the reflector and disturbing the beam's reflection.
Replaces the mounting bracket that comes with the sensor.
Comes with Hood two sets of nuts and bolts and a plug

71-MLSBC

LiftMaster Single Button Control Mod. Field Kit Mod. Logic

Field service mod. for adding single button feature to medium duty logic operators

C20-SR

Bearing Retainer for 1-1/4" (PFL6Z)

Same as PFL6Z. Bearing flangette only.
1-1/4" press fit

MEL-T315

Miller Edge MEL Transmitter 315 MHz 2nd Generation

MEL provides a wireless signal transmission from an edge sensor to operator controls eliminating the need to hard wire these devices

LM21XP

LiftMaster Extended Performance Fire Door Release Device

UL864 Revision 9 compliant
Programmable DIP switch delay setting - either 10 20 30 or 60 seconds delay of door release to permit passage clearance
Inputs for normally open 2- or 4-wire detectors and 4-wire normally closed detectors
Trouble and alarm relays for communication with the fire alarm control panel if required
Audible trouble sounder to indicate when the release device is not operational
On board diagnostic LEDs for easy troubleshooting

.......more details

Installation manual

16-4L290

LiftMaster Cogged Vbelt 4L 29"

26CW94325

Truck Door Bottom Panel with Seal (15" x 98") Painted White for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes only with bottom retainer and seal (installed)

.......more details

DL-4000-6

Dock Leveler Retainer Galv. Steel Weldable 6' Long

Weldable to sides of dock leveler
Use with 4007 aluminum retainer & light brush (not included).
Vinyl insert slides into this outer retainer.

95358

Marantec Front Idler Assembly

Complete Roller holder assembly for ML-Series rails
Used for belt and chain drive opener rails
Same as # 8030432

CHD200

Chain Hoist Direct Drive Assembly 200 D

Sectional door Direct drive - 1" shaft
Requires keyed shaft
Includes: 2 shaft collars
Fits 3-3/8" min. offset
Includes 26' of chain

BRAKEPART016

Manaras Brake Pad Assembly MLT MLJ MLH

Includes: 1 x BUSHING026 1 X CLUTCHPLATE008 1 X PLATE041

745266

Strobe Low Profile Amber LED Warning Light 12-24VDC

Fully encapsulated electronic circuitry ensures a lifetime of trouble-free operation.
Installer can select the flash pattern of each high intensity strobe by wiring the unit according to the flash rate preferred.
4 7/8" X 5 7/8" Rubber base Surface mount 12-24VDC