Devanco Canada - Get The Right Garage Door Opener‎ and Parts

BL-10

Barlock Kit Complete for 10ft Wide Door Kit includes hardware bag

Kit includes hardware bag and bars (61-1/2")

Assembly Manual

ALUM-506

Aluminum 24" x 100' Spool Windswept Smoke/ Vent Fumee # 506

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 506
Reverse side is #431 Bright White

Colour chart

SLC-221

Linear Commercial Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
Continuous-tone entrapment alarm with reset button
LED diagnostic display for ease of setup and troubleshooting
Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
Regulated 24 Volt DC power available for access control accessories
Integrated maximum run and auto close timer (0-9 minutes)

.......more details

7001-12-CHARCOL

Commercial Side & Top Weather-Strip 12' Long - Charcoal (H)

Charcoal galvanized steel with charcoal dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

SA-TORSION-ASSY

Complete Torsion Assembly Special Order

Special order

ACT-34D

Linear 4-Channel Block Coded MegaCode Key Ring Trans Prox Transmitter 318 MHz

Compatible with all Linear access receivers and controllers
Built-in 26-bit Wiegand proximity tag
Eliminates need for separate proximity card or tags and transmitter
Supplied with quick-disconnect key ring
Same facility and ID codes for transmitter and proximity tag
Sold in lots of 10

.......more details

ALUM-801

Aluminum 24" x 100' Spool White / Blanc # 801

20% thicker than the aluminum sold in retail stores (0.022" )
Aluminum on the reverse side
Gentek # 801

Colour chart

XT2563-00-W

Xcluder Rodent Block 3" Black 75' Reel

For commercial and residential applications
Creates a tough barrier that is virtually impenetrable to rodents

Sell Sheet

19-5116-NP

LiftMaster Trolley Roller Chain Pack #41 for 16ft Door Nickel Plated

For 3/4 & 1 HP trolley operators

K20-1050C-2T

LiftMaster Electric Motor 1/2 HP 230V 1 ph CF

For gate op. SL580-5011

PRO-HBH-7523U-R

Micanan 3/4HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

3/4 HP230V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

38874R3.S

Genie Electronic Circuit Board Assembly

Replaces board 38001R3.S and 37470R3.S
Compatible with Genie Series 3 model 3024 garage door opener systems and Overhead Door Series 3 Model 7030

MOTOR275

Manaras Electric Motor 1HP 208/460V 3PH

Continuous-duty base mount
This item is compatible with BRAKE011

CP-BRG-1

Lynx Bearing 1" *** Replaced by HW-BRG-1

2 in total on a MCJH

ME111-2L-T2

Miller Edge Black Left Hand Outlet Monitored 7/8" wide x 1-1/2" high Sold by the Foot

Slide in style edge for barrier gate and counter shutter application.
Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •10K ohm resistor •Temperature Range: -30F to 155F
Lead wire: AWM 22 gauge 2ft length
Sensitivity: nominal 6-8 PSI
Vertical or horizontal mount
ANSI/UL325 recognized component

.......more details

Installation Manual Worksheet Sell Sheet

MHN-SET-100

Magnetic House Number Set 5" Black Embossed 100 pcs

Flexible magnetic material with an embossed finish
100 piece contains ten each of numbers 0-9
Priced per box

15-50B35QGH

Sprocket 50B35 1-1/4" Bore 1/4" Keyway

H101L5-RH

LiftMaster Ind. Duty Hoist Op. 1 HP 115/230 VAC Logic 5 Right Hand W/Brake ***No Longer Available

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'installation Sell sheet Brochure

CP-SH-58-1038

Lynx Complete Limit Shaft Assembly for MCJH

5/8" x 10-3/8"
Same kit used for HDC except the HDC has 1 extra 5/8" space washer

RDGRNCARD

LiftMaster Warning Device Option Board with Red/Green Light Box

The Red/Green warning light card flashes a warning light for 10 seconds prior to the Timer to Close activating the door to close.
Advanced warning of the door closing helps prevent traffic collisions with the door
Controls both 24V & 110V traffic lights

Installation Manual

41B591

LiftMaster Replacement Battery Kit for 475LMC 2/pk

For 475LM Battery Back Up Units only
Used only on the following LiftMaster models: 2500 3500 3800 & 8500

1001-18-BLACK

Commercial Side & Top Weather-Strip 18' Long - Black

Aluminum retainer with black dual-fin vinyl

14-1004

PVC Roll 8" x .080 Standard Clear Smooth 300' for Replacement Strip Curtain

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

CB18B0500-KOR

Cable 1/8" 7x19 500' Galvanized Supreme

Galvanized Cable 1/8" 7x19 500ft spool.
Cable break strength: 2000 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

SNRRLIGHTJHL

LiftMaster Light Bulbs for MiniKey 10/pkg

Light bulbs for recessed keypad
Same as SN1650029

5001-8-CHARCOAL

Residential Side & Top Weather-Strip 8' Long - Charcoal

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

1104-ASFT-24FT

Elton Aluminum Stiffener for 1104 24ft

Prevents the 1104 from buckling in the hot sun

27-20115

Truck Door W-Style Spring Assembly Roadside LHW 35" Long

Wire thickness: .187
Assembled Spring length: 35 inches long
Inside diameter: 2 3/16"
Includes cable drum and bearing assembly winding cone wound onto spring for stronger design and internal spring spacer.

MK00642

Micanan Smart 10.0 Full Feature Circuit Board with Contactor Interface Monitored 575V

For all HP - 575V all voltages 1.5 2 3 & 5HP

Instructions Manual

MK00737

Micanan Feature Circuit Board with Contactor Interface Non-Monitored 575V **use MK00642-NM

For all HP - 575V all voltages 1.5 2 3 & 5HP
Non-Monitored

Instructions Manual

10-1000-BAR

Strip Curtain Universal Mounting Bar Pre-Studded Angle Sold per foot

Includes: 1 cinch plate and 2 wing nuts which covers 6 of the pre-studded bolts at one time making installation and maintenance easy.

GH4416-06-R

Green Hinge #6 12-ga Right Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-05-L

Green Hinge #5 12-ga Left Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-02-L

Green Hinge #2 12-ga Left Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

18FT-TROLLEY-SET

LiftMaster 18ft Double Angle Rail Set for Comm. Trolley Ops (2 pcs) *Actual length 251"*

Double Angle Rails for doors up to 18' high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us

10TD433HH1

BEA 1-Button Digital Transmitter 433 MHz

Transmitter offering means of activation of automatic doors with extended hold feature.
Delay and no-delay learn modes for either instant of delayed activation for sequencing doors.
Operating temperature: -10 to 55C
Controls one 10RD433 receiver.

FGS-634

Devanco Food Grade Silicone 262g

For use in food and industrial plants
Stops squeaks
Prevents sticking and corrosion
Protects rubber mouldings and weather stripping

Safety Data Sheet Fiche de données de sécurité

27-48-130

Extension Spring 8' Door - 130 lbs Yellow

Single - Loop
27" long 48" stretch 130 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

KSWG-0623

LiftMaster Rear Connector with Pin for LA500DC

9003-17FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 3" Track Bolt On 17' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

2376.177_25.860

Whiting Torsion assembly .177 wire size 25" spring length 86" shaft

E041

Rolling Steel Bottom Bar Astragal 679 Sold per Foot

SLT4-20

Rolling Steel 3" Crowned Slat 20-ga Galvanized

12-10715

LiftMaster Flanged Bearing 1" Keyed

ST18COP

Copper Stop 1/8" 100 Stops per Pkg *price on request

Stops ONLY
Sleeves sold separately part # SL18COP

.283-3-3/4-RH-C

Torsion Spring .283 x 3-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .283 ID: 3-3/4" Length: 12 ft

.234-2-5/8-RH-C

Torsion Spring .234 x 2-5/8" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .234 ID: 2-5/8" Length: 12 ft

.192-2-LH-C

Torsion Spring 192 x 2" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .192 ID: 2" Length: 12 ft

7515.1

Whiting Stainless Steel #77 Lock Handle Keeper

PRO-GH-7553U-LH

Micanan 3/4HP 575V 3P Gearhead Op. N1 Eyes Monitored ECB Left Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

MK00650

Micanan UPCHARGE for N-4 Photocells in Lieu of Nema-1 Reduction for N1 Included. **Obsolete Repl by MK00697

In lieu on the standard Nema-1 photocells supplied with the operator

Installation Manual

41A5434-11

LiftMaster Full Belt Assembly for 7ft Door For Models 2001 and up

For belt drive models: 2500 2580 2280 3500 3280 3280M 3850 8355 2585 3585 2500B & D

MW-00021

Micanan Splash Proof Cover Fully Assembled

Splash proof cover for models: PRO-H J HHD GH and GHC
Same as MP-00204

IRB-S

EMX Industries Mounting Screws for Photoeyes Sold as a Set of 2

Two sets of screws are required for each bracket installed

BK309

Jamb bracket J-09 #9 12 gauge

Sold by the piece
Height 4.25" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

MX00147-OLD

Micanan Complete Clutch Kit for PRO-TB Old Style Frame

Before 2006
9" Diameter

9150000627

1/8" Stops ONLY 100/pkg

Stops only 100 per pack

8002-7FT

Side Weatherstrip with Black Rubber Bulb for Pedestrian Door 7ft Long

Aluminum and Black Rubber
Comes in 7ft lengths

50680

Doorlec Clutch Assembly for LJH

OGH-6432-ECB

Manaras 1/2 HP 480V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

OHJ-6434-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 480V 3 Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

Installation Manual Sell Sheet

16-5L300

LiftMaster Cogged Vbelt 5L 30"

773

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2-1/2" 1000/Box *** Temp. NLA

7/16" Head
Hex washer high profile head

803

Fasteners Sleeve Anchor 3/8" x 3" 50/Box

Secure anchoring into concrete brick or block

LA500DC

LiftMaster Primary 24VDC Actuator Arm for Single Gate Applications New Model

Replacement actuator arm for single gate applications

Installation Manual Manuel d'installation Sell Sheet Brochure

02-711

LiftMaster Nema 7/9 Ceiling Switch Pull Control

Single Pull Switch Control
Hazardous Area Overhead Mt. (NEMA 7/9)
Die cast hazardous area enclosure
May be used in two different ways; as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring). In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
WARNING: When used on most industrial operators this control will not stop the door. Use another control that has a STOP button in conjunction with this control.

.......more details

831T

Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz 107483 *** To extent of inventory

Open/Close/Stop stationary remote for 1 door.
Designed for commercial automatic door and gate operator applications.
This transmitter can operate a single receiver connected to one operator
Compatible with 3-channel Allstar and MVP receivers
Easy access to battery and coding switch
Power: 9-volt battery

.......more details

Programming Instructions

BT505L5

LiftMaster 1/2 HP 575V 3p Commercial Trolley Operator with a Brake Logic 5

Low profile trolley operator with brake installed
Comes with #48 roller chain

Installation Manual Manuel d'Installation Sell sheet Brochure

790

Fasteners Hex Nut 3/8-16 1000/Box

786

Fasteners Hex Nut 1/4-20 1000/Box

5X10SC50

Devanco Loop 5' x 10' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

RBH753L5-RH

LiftMaster 3/4 HP 208/230/460 VAC 3 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet

CH751L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 115/230 VAC Logic 5 Left Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with either CPS-UN4 or CPS-RPEN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

K001D8075-1

LiftMaster Logic Board - L5 ** USE K001D8395

14D1279E

Programming Instructions Instructions de programmation

348.000

Whiting Tongue & Groove Bottom Panel Assembly with #77 Lock Made to Order. **Quote Only

15-1/2" x 96" standard size panel.
Extra wide panels will carry an additional charge
Primer only

111854.0002

Overhead Logic Board for RSX 3/4 & 1 HP 1PH

Description: KITPCB1PH3/4-1HPSX/HXUL10
For RSX ad RHX models 3/4 & 1 Hp Single phase operators

41A6104

LiftMaster Cable Tension Monitor

Used on jackshaft model residential garage door openers

MV-00023

Micanan 1-Door O/C/S Transmitter CT-1 313 MHz

Programming Instructions

71-65WTC

LiftMaster Weatherproof Case

Optional weatherproof case suited for 412LMC 422LMC and 423LMC
Measurements of the interior: W=5.75" L=7" D=3"
Measurements of the exterior: W=7" L=10" H=3.5"

12-000I

Secure Brands Keypad with Intercom Post Mount

Post mount with Intercom
RemotePro KP 26 bit wiegand output keypads
Available in three different mounting configurations: post single gang or flush.
All single gang RemotePro KP models are available with a silver aluminum faceplate.
A heavy duty metal keypad is used with all exterior models providing years of trouble free entry.
Post mount models feature a stainless steel faceplate in a heavy metal powder coated enclosure with nightlight.

.......more details

DF084.1

Whiting Dry Freight Door 3/4" with Track Balancer and Standard Hardware

Standard features include: 2-cable balancer with independent springs
Balancer springs treated with rust preventative
All door hardware is E-coated
Spring loaded lock catch
Heavy-duty 2" 13-gauge track
Stainless steel aircraft cables

.......more details

GITR-3

Genie Intellicode 3-Button Remote 37517S 390 MHz *** To extent of Inventory

Replaces Series II GIT-1 GIT-2 & GIT-3
Battery Instructions Visor Clip Included
Note: Only the far right of the three buttons (1 dot button) will operate those older Genie Intellicode units built from 1995 through 1997.
If you have a Genie unit built in 1995 1996 or 1997 this is the only remote that Genie presently makes to operate the Genie garage door openers built during these years.
In this special case the remotes can only be used as 1 button remotes and no other multi-button Genie remote is compatible.

Programming Instructions Instructions de programmation

28-30015

Truck Door 1" Vertical Track with Holes 93.5" for Todco Roll-Up Doors

Galvanized steel 14 gauge construction
Holes drilled to allow for faster plug weld installation to frame
For use with 1" rollers

BK000-B

Residential Top Roller Bracket Adjustable 2-Bolt Sold per Piece

Sold per piece - not sold as a pair
Meant for 2" hardware

MJ7104

Doorlec Utility Switch 21800

Utility switch with a 'NO' and a 'NC' contact
Adjustable arm with roller

27096A

Genie Drive Gear *** To Extent of Inventory

Gear for Genie Chain Glide PMX Series and PCG Series
3-1/2 inch diameter nylon gear with square center hole
Square center hole is 7/16"

1005-1-3/4-10

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4"

MWRTA12B

Miller Edge Wireless Transmitter with Audible Alarm and 1 Channel Receiver

For 2-wire edges
Was previously MWRTA02A now has a new board making installation easier
Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm.
This feature that activates when the battery has only 25% of its life remaining indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.