Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MOTOR255

Manaras Electric Motor 3/4HP 120/240V 1PH

E/BLOP/151

Automatic Systems Safety Edge for BL229 16'-5"

T-831

FL-Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 311 MHz 107483

Open/Close/Stop stationary remote for 1 door.
Designed for commercial automatic door and gate operator applications.
This transmitter can operate a single receiver connected to one operator
Compatible with 3-channel Allstar and MVP receivers
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)
RF frequency: 311 MHz
Dimensions: 3.625" W x 6.625" H x 2.375" D
Linear part number: 107483

CP-BRK-CAM-MCJ

Lynx Retaining Plate & Hardware for MCJH

31355

Doorlec Sprocket 80B14

WHITING-PW

Whiting White Urethane Topcoat Option Dry Freight Door Panel

This is an option when ordering a panel

2500-1980

Linear 3-Phase Motor Board

Motor board for "green board" generation OSCO gate operators.
For HSLG BGU GSLG VS-GSLG SLC and their variants

SG-13-NO

Telco Light Curtain with Rectifier Normally Open 72" (13-193-028-D1-E-H58-5) ***No Longer Available

Normally Open
SGR13-193-028-D1-E-HS8-5
SGT13-193-028-D1-E-01-15
1928mm housing 1800mm active height 28 channels NO relay output 15m cable

Specification sheet Wiring diagram

2996.3

Truck Door 2" Steel Roller 5" Long Stem Enclosed Bearing for Whiting Roll-Up Doors

A Whiting original

.406-6-L

Cut-to-Length Torsion Spring .406 x 6" Left Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.406-6-R

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

MP-00204

Micanan Splash Proof Covers PRO-H J HHD GH GHC (Fully Assembled)

drawing

T008

Manaras Trolley Track 8ft for 1/2HP models *Actual length 126"*

For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)

MK-00013

Micanan Relay 120VAC coil DPDT (Flange Mount)

.363-334-R

Cut-to-Length Torsion Spring .362 x 3-3/4" Right Hand Wound Green/White

Priced per inch - cones sold separately
For factory installed cones use part no. C-375-INSTALLED

MX00034-575V

Micanan Brake Assembly for PRO-HHD with 575V Solenoid (MX00206-575)

Complete brake assembly including 575V solenoid - solenoid cover sold separately part #MM00011

MR00006

Micanan Hand Chain Sold by the Foot

DOOR HEIGHT X 2 LESS 4 FT

AOMRON

Omron Heavy-Duty Retro-Reflective Photo Eye 110VAC/24V 40ft Range

24-240 VAC/DC
35mA/125mA at 24VAC
20mA/60mA at 110VAC
UL listed to UL325 standards
NEMA 3 4 12 Outdoor Rating
40 ft. sensing distance

.......more details

7001-16-CHARCOL

Commercial Side & Top Weather-Strip 16' Long - Charcoal (H)

Charcoal galvanized steel with charcoal dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

BK020/PR-BOLT

Commercial 2" Safety Bottom Bracket with Bolt Sold as a Pair

Maximum cable diameter: 3/16"
Maximum door weight: 1300 lbs Zinc
Plated Steel
Sold as a pair

Installation manual

K75-12870

LiftMaster Complete Door Arm Kit for Trolley Operators

Kit includes: Curved Arm Straight Arm Door Bracket and Hardware
For All LiftMaster Trolley Operators except HCT and APT

ME123-M-BLK-END

Miller Edge Black End 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

ME111-E

Miller Edge Black End Outlet 7/8" wide x 1-1/2" high Sold by the Foot

Slide in style edge for barrier gate and counter shutter application.
Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
Lead wire: AWM 22 gauge 2ft length
Sensitivity: nominal 6-8 PSI
Vertical or horizontal mount
ANSI/UL325 recognized component

.......more details

Installation Manual Worksheet Sell Sheet

CB5320500-KOR

Cable 5/32" 7x19 500' Galvanized Supreme

Galvanized cable 5/32" 7x19 500ft spool.
Cable break strength: 2800 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

HBFST-BC

Keyed Control Switch with Best Cylinder

NEMA 1
TAMPERPROOF FLUSH MOUNT
TWO POSITION (OPEN-CLOSE) WITH STOP BUTTON
CENTER RETURN
SINGLE GANG BACK BOX
STAINLESS STEEL FACEPLATE

.......more details

SLT14-22

Rolling Steel 3" Flat Slat 22-ga Galvanized

SLT4-20

Rolling Steel 3" Crowned Slat 20-ga Galvanized

OPH-6212-ECB

Manaras Opera-H 1/2HP 240V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

Installation Manual Sell Sheet

9150000628

5/32" Stops ONLY 100/pkg

Stops only - 100 per pack

1A4324-EZ

LiftMaster Steel Hood EZ Mount Bracket with Adaptor Plate (75-12362/ 001A4324)

Heavy-gauge steel bracket with EZ mount adapter plate mounting bolts nuts and washers.
Adapter plate holds mounting bolts in place for ease of mounting.
Cannot be used with Model GH 3HP.

SSZP24

Solid Shaft 1" Keyed Zinc Plated 24'

Q400-D

LiftMaster Circuit Board Assembly with Reset (Q400E)

RS1029

Roller 2" Steel 9" stem- WL 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 9.5" Overall Length: 10.5"
Box qty: 100 Box weight: 60 lbs (2-9-10 WL steel)

MX00147-NEW

Micanan Complete Clutch Kit for PRO-TB New Style Frame (MX00211)

After January 2006
8" Diameter pulley
Feb 2017 - new part number MX00211

.295-2-L

Cut-to-Length Torsion Spring .295 x 2" Left Hand Wound Blue

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

CAM004

Manaras Limit Cam

Limit cam for Mountshaft009A 018C 018D
2 cam's required per shaft

19-40ML

Master Link #40

For #40 chain
ANSI Standard Carbon Steel

CP-CRG-NEW

Lynx Auto Re-Connect Carriage 14-1/2" Arm Sold Separately

Will work on most brands of commercial trolley operators using 2" angle tracks.

9931T

Allstar 1-btn Transmitter 108787 318 MHz ***Replaced by P-9931T

Compatible with Allstar and MVP receivers
Visor mounting clip supplied
Power: 9-volt battery
Codes: 19683 (set by nine trinary dip switches)
RF frequency: 318 MHz
Dimensions: 2.25" W x 4.625" H x 1" D Order number: 190-108787

.......more details

Programming Instructions

HAE00002

Linear Safety Beam Set *** No Longer Available

Set includes: Sender and Receiver photocells wire and connectors
Safety beams will work with all Linear operators that currently have safety beams installed.

600BL

6" Light Brush Insert 6ft Long

Polypropylene bristles

1006-1-3/8-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

Black with flexible fin to touch door face.
For door thickness 1-3/8"

1104-12FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 12' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-16FT-SAND

Residential Side & Top PVC Weather-Strip with cap 16' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

27-20307

Truck Door Balancer Bracket End - Roadside for Whiting Roll-Up Doors

Steel construction
Plain finish
Cross Reference: W # 2524 for # 2376 balancer

MA013

LiftMaster Shear Pin #6 (Standard)

For barrier gate operator models: MADCBB MATDCBB MASDCBB & MASTDCBB
Use Shear Pin #7 ( MA0137 ) if hole shows sign of wear

IRB-S

EMX Industries Mounting Screws for Photoeyes Sold as a Set of 2

Two sets of screws are required for each bracket installed

CABLE_516SS-500

Cable 5/16" 7x19 500' Stainless Steel

15-48B18LGE

LiftMaster Sprocket 48B18 1"x 1/4"

Also known as: 15-9004 1548B18LGE 159004

JHDC22X4BMC

LiftMaster MAXUM Jackshaft 1.5 HP Heavy Duty 480V 3PH 60 Cycles/Hour 2200LB

New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada
Drive Type 65:1 Gearbox with #50 Chain Output
Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls

.......more details

MASDCBB3

LiftMaster MEGA SPRINT High-Speed DC Barrier Gate Op ARM SOLD SEPARATELY Incl 29-NP712

24VDC (1/2 HP equivalent) motor
The heavy-duty motor supports 10000 cycles per day with an operator speed of .9 seconds to open or close.
Radio receiver built-in
Aluminum alloy chassis
Built-in battery backup
Soft start/stop

.......more details

63000709

FAAC P Limit Switch Magnetic 746/844 (Rack)

Compatible with the 746 and 844 motors
Replaces discontinued FAAC Part; 7580375

CAPXSTKPL

LiftMaster Trim Kit with Postal Lock for CAPXS

Trim plate with integrated postal lock cover exclusively for installing with Model CAPXS – Smart Video Intercom S
Pre-Wiring included for postal lock device (not included).
Provides a clean aesthetic installation when the application calls for a postal lock while also helping hide remnants of a previous installation
Dimensions: 14” x 6.5” x 1.4”

BPFL205

Bearing Flangette Retainer Only PFL-205 2-Hole

Does not include bearing
Steel Zinc plated finish

SHAFT117

Manaras Output Shaft for OSH

TRACK005

Manaras 1 Piece Galv Track 2x2x16'6 ** 1 pc Only

2 pices are required to make 1 set of tracks
Does NOT include the chain

MOTOR481

Manaras Electric Motor 1 HP 600V 3PH TEFC Brake ** Special Order

MV00164

Nice AB 42GRL 9000-THRU-BEAM PHOTO Emitter 24V

050ACTWFLKMC

LiftMaster Receiver Logic Board AC WiFi Lock Capable

315MHz Security+ 2.0 Lock Capable Receiver Logic Board Replacement Kit.
For use with various LiftMaster® and Chamberlain® WiFi® AC Chain Drive and Belt Drive Garage Door Openers; powered by myQ®.
This replacement part is for units featuring a yellow learn button; manufactured after 2017 only

CGT101L5

LiftMaster Heavy Industrial-Duty Trolley Op. 1 HP 115V w/Carwash Mod. N4

Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
GT operators are directly attached to drive and control the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
High-starting torque continuous duty motor with overload protection
Door speed approx. 11-12 inches per second

.......more details

OTBH-6233-1-M-N1

Manaras Trolley Operator 3/4 HP 208V 3 Ph Monitored w/N1 Photoeyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

OSH-6532-M-RH

Manaras Opera-SH 1/2HP 600V 3Ph Monitored No Photoeyes

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

K19-48069-NP

LiftMaster Limit Chain Assembly #48 x 69 NP

Compatible with LiftMaster® Model SL585U Slide Gate Operators

234-143

Serco 3/4" SAE Flat Washer ** Price by Quote Only

For Serco loading docks

EHJW-321-3/4

Doorlec Ind Jackshaft Op. Watertight ECB 3/4 HP 230V-1Ph

Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

7500-FS-GALV

Fire Shutter Hot-Dipped Galv Interlocking Slats Made-to-Order

Shutters can be up to 13'- 6 inches wide and 12 feet tall with UL labels Class A B or C while still being able to function as normal counter rolling shutters.
Oversized fire shutters can be manufactured up to 20 feet wide
Model 7500 fire shutters can be installed with either a manual lift external motors a hand crank with or without automatic testing tubular models with the option of automatic testing
Along with UL labels that will automatically close the fire shutters for either 3 1½ or ¾ hours the fire shutters can also be manufactured with smoke protection
Available finishes: Hot-dipped galvanized steel with an optional baked-on gray polyester enamel coating or 304 stainless steel with a number 4 finish flat profile
The viscous speed governor can be set to automatically close the fire shutters at speeds of 6 inches per second up to 24 inches per second complying with NFPA 80 specifications.

.......more details

GH-353-3/4

Doorlec Industrial Gearhead Door Operator 3/4 HP 575V 3-Phase

Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Worm gear reducer 40:1 ratio for high-torque and long life
Solenoid Disk Brake Prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Optional Friction Clutch available

.......more details

GH-311-1.5

Doorlec Industrial Gearhead Door Operator 1.5 HP 115V 1-Phase

Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Worm gear reducer 40:1 ratio for high-torque and long life
Solenoid Disk Brake Prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Optional Friction Clutch available

.......more details

HCT14

LiftMaster HCT Rail Only 14'

Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
Heavy-duty 12-gauge C channel corrosion resistant steel track.
This DOES NOT include the head unit
Will open a standard sectional door 13'6" high

BCH751L5R-BZ

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Op L5 Carwash and Roller Bearing Mod. RH ***No Longer Available

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

658206

LiftMaster Exterior Pneumatic Treadle Kit 10ft

Outdoor Enclosure (NEMA 4/12)
Includes 10 feet of signal hose outdoor air switch and hose plug
OPEN (all operators) when the vehicle passes over treadle hose. The weight of the vehicle on the treadle hose activates a pneumatic switch which sends an open signal to the door. Requires a 2-wire connection to the operator but does not require power to function.

SR-9004-BLACK

Elton Reverse Angle Clip-On Vinyl Black 200ft Roll

Side Use – Clips onto Steel Jamb
Also for Residential Use

MA020T

LiftMaster Mega Arm Tower Replacement Cover

Mega Arm Tower Cover.
Compatible with LiftMaster® Barrier Gate Perimeter Access Systems Operators.

LMDBPACK-SN

LiftMaster Yale Smart Touchscreen Deadbolt Satin Nickel Finish Includes 821LMC

Smartphone Control – Pair with included Lock Wi-Fi® Bridge to securely lock unlock and view door activity in the myQ® App.
Touchscreen Keypad – Wakes with a touch and has backlit numbers that won’t wear off.
Key Free – No key hole means no lock picking or keys to lose.
9V Battery Back-Up – Never worry about getting locked out due to dead batteries.
Works with Key by Amazon to provide a seamless delivery experience.
Eligible Prime Members simply download the Key by Amazon App and link it to your myQ account.

.......more details

Programming instructions Sell sheet

MOTOR359

Manaras Electric Motor 1 HP 208/480V 3Ph

Continuous duty C-flange ODP 60Hz

109290

Amarr/Alpine Snap Latch Supply Bag for 1 3/8" Thick Doors *** Price by quote only

Is needed when 105381: T-Handle Lock Kit for 1 3/8" thick doors are ordered or the lock won't work.

1371

Whiting Complete Bottom Bracket with Cover

F520-3.15A

Fuse 5 x 20mm 3.15A 250V Fast Acting 5/Pkg

5 x 20mm miniature fast acting glass fuse
Rated voltage: 125V/250V
Rated current:3.15A
ROHS compliant
5 per package ( Clamshell)

.243-258-L-C

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

LM2W-B

LiftMaster Photoelectric Smoke Detector 12/24VDC Standard 2-Wire (LMPD24-2W)

Plug-in detector line mounting base included
Large wire entry port
In-line terminals with SEMS screws
Mounts to octagonal and single-gang back boxes 4-square back boxes or direct to wall or ceiling
Stop-Drop N Lock attachment to base
Removable detector cover and chamber

.......more details

K71-D575-1

LiftMaster Drum Brake Kit 3 Ph 575V (Late Model Logic 5 Shoe and Drum Models)

Internal Solenoid Drum Brake with Cable Replacement Kit.
Compatible with LiftMaster® Logic 5.0 Model T SD J H and HJ Industrial-Duty Operators.
Complete service kit includes: Solenoid Cover Brake Solenoid Brake Drum Cable Mounting Plate and Installation Hardware.
Quiet preferred sound profile
Industry benchmark stopping performance with adjustability
Significantly reduced modes of failure

.......more details

Installation manual Manuel d'installation

LB610-36SF

Steel Faced Laminated Bumper Black 10" x 36" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

MB-01002

Micanan Electric Motor Only 1/2HP 110/220V 1PH Base Mount TEFC FR56

Base Mount TEFC electric motor
Fits models: TW TBW JWHWHHDW SDW

MC00007

Micanan Gear Reducer BHC 80 40:1 143TC (2 HP)

MD-00137

Micanan Roller Chain Waterproof #41 10' Pack

26140

Doorlec Cam Shaft Threaded 5/8" x 10-3/4"-24

This limit shaft will work on all Side-Mount Doorlec Openers
Cam shaft 5/8" (1.59 cm) - 24 x 10 3/4" (9.5 cm) fine thread

SG-13-NC

Telco Light Curtain with Rectifier Normally Closed 72" (13-193-028-D1-E-H59C-5) ***No Longer Available

Normally Closed
SGR13-193-028-D1-E-HS9-5
SGT13-193-028-D1-E-01-15
1928mm housing 1800mm active height 28 channels NC relay output 15m cable

Specification sheet Wiring diagram

41A5047

LiftMaster Door Bracket Kit

Also known as: 12C582 12B198 12B374 062265 41A5047 12B374-2
Includes door bracket clevis pin and lock ring

GD-STEND-24D

End Cap Steel 18G 24" Double 1-3/4"

SNACPH32

LiftMaster HID 30-bit Proximity Card Facility Code 2 *Discontinued*

Same as SN000099-30-2
Compatible with KPR2000 reader
Replaced by LMPC2-SN (need to know facility code)

TL-36ML-BLUE

LOCTITE Threadlocker Blue 36ML *** Price by Quote

Medium strength
This product cures fully in 24 hours and can be dissembled with hand tools.
This product is an anaerobic adhesive applied by drops to the threads of fasteners. It then cures to a hard thermoset plastic that locks the threads together.
For metal to metal applications only