Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Carwash
MD-00348

Sprocket 50B26 x 1" 1/4" KW 2SS

466LMC

LiftMaster Wireless Commercial Keypad 390 MHz ** Discontinued

  • Up to 100 000 individual codes
  • Mounts to wall or gooseneck post
  • Incl. 6-volt alkaline battery
  • Illuminated stainless steel faceplate and keypad
  • Tamper-resistant case and "low battery" indicator
  • Requires 412HMC receiver
  • Dimensions: 5" W x 6" H x 5 1/2" Depth. Tapers 4 1/2"
  • Replacement antenna kit K001C3196-1 (also known as 161A21)
Installation ManualSell Sheet
SLT4-22P

Rolling Steel 3" Crowned Slat 22-ga Primed

.343-6-L

Cut-to-Length Torsion Spring .343 x 6" Left Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
PRO-GT-15021-U

Micanan 1-1/2HP 230V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

  • On-Board receiver holds up to 20 transmitters
2100-1738

Linear Drive Shaft 1" Slide Gate HSLG

OPH-6232-M-N1-RH

Manaras Opera-H 1/2HP 208V 3Ph with Monitored Board and N1 Photoeyes Right Hand

  • Monitored version with Nema 1 photoeyes
MD00086

Micanan Sprocket 40B18 x 1" 1/4" Keyway

MP-00186

Micanan Auxiliary Chain Hoist Disc. Trolley

  • Allows for operation of a door by an auxiliary chain hoist.
  • Hoist mechanism is coupled to front end of drawbar
  • MUST specify door width and position of hoist (left or right)
AUXCON040

Auxiliary Contact Allen Bradley 100FA22 2X NO 2X NC

OSH-6814-M-N1-RH

Manaras Opera-SH 1 HP 208V 1 Ph Monitored w/N1 Eyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
2513-GLASS-ONLY

Garex NEO Clear Thermal Glass Fits 25x13 Frame

  • Glass only to fit 25x13 frame
  • Glass measures smaller than frame
JHDC7S1N4X

LiftMaster MAXUM with NEMA4X Jackshaft 1/2HP 120/240V 1PH DC Operator 30 Cycles/Hour 700LB long output shaft **Currently Unavailable

  • Good for Carwash and Barns
  • Corrosion resistant
  • DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
    • .......more details
RS389BWL

Roller 3" Steel 8" High Strength Steel Stem 6203-WL

  • Solid Steel Head with 6203 sealed precision bearing
  • High strength steel stem measures 7.69" to bulge 9" overall length 7/16" dia
  • Zinc plated head and stem
  • Rating: 100000 cycles of a 12' door
  • Load: 200LB
K15-5032

Sprocket 50B32T 1-1/2"X1/2"

  • 15-5032 G155032 155032
  • Compatible with LiftMaster® Model BG790 Barrier Gate Operators.
RJDC7S4N4XR

Liftmaster MAXUM with Nema 4X Jackshaft with Manual Release 1/2HP 480V 1PH/3PH DC Operator 30 Cycles/Hour 700 lbs Right-Hand; 3" Output Shaft ** Currently unavailable

  • Good for Carwash and Barns
  • Corrosion resistant
  • High-efficiency DC motor provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Optional Battery backup sold separately (DC7AH)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
    • .......more details
02-110

LiftMaster Tamperproof Two-Position Key Switch

  • Two Position Key Control Station with STOP button
  • Indoor Flush Mount (NEMA 1)
  • Tamperproof
  • Steel back box with architectural aluminum faceplate and standard key cylinder
  • OPEN/CLOSE spring return to center (OFF) key removable in center position only with STOP button. Allows complete control of door. May be used with all LiftMaster industrial operators.
5600

Whiting Truck Door Heavy Duty Bottom Roller Bracket Assembly

OTBH-6434-M-N1

Manaras Trolley Operator 1 HP 480V 3Ph Monitored w/N1 Photoeyes

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • Includes PHOTO-070
MRGHB-6537-M-N1-RH

Manaras 3 HP 600V 3P Jackshaft Monitored w/N1 Eyes with break Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on large sectional multi-blade and industiral rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MRGH-6537-M-N1-RH

Manaras 3 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on large sectional multi-blade and industiral rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
PAINT-PEN-PEBBLE

Garex Touch-Up Paint Pen Pebble

34210

Doorlec Heavy Duty Drive Pulley 4L/5L

OPH-6213-M-N1-RH

Manaras Opera-H 3/4HP 240V 1Ph Monitored Board w/N1 Eyes Right Hand

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
OSH-6432-M-N1-RH

Manaras Opera-SH 1/2 HP 480V 3 Ph Monitored ECB w/N1 Photoeyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
OSH-6432-M-N1-LH

Manaras Opera-SH 1/2 HP 480V 3 Ph Monitored ECB w/N1 Photoeyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
MGHB-6237-M-N1-LH

Manaras 3 HP 208V 3P Jackshaft Monitored w/N1 Eyes with brake Motor Upgrade Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6436-M-N1-RH

Manaras 2 HP 480V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
Specification Sheet Drawing Diagram
MGH-6214-M-N1-LH

Manaras 1 HP 240V 1P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
Specification Sheet Drawing Diagram
MGH-6214-M-N1-RH

Manaras 1 HP 240V 1P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6213-M-N1-LH

Manaras 3/4 HP 240V 1P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
Specification Sheet Drawing Diagram
RGH-6214-MON-LH

Manaras 1 HP 240V 1Ph Rapido Gear Head Op. Monitored ECB Left Hand

  • Rapido version of model OGH
  • Includes PHOTO-061 Monitored N4X Thru-Beam eyes
OGH-6113-M-N1-RH

Manaras 3/4 HP 120V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
OGH-6113-M-N1-LH

Manaras 3/4 HP 120V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
OGH-6233-M-N1-RH

Manaras 3/4 HP 208V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
OGH-6433-M-N1-RH

Manaras 3/4 HP 480V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
OGH-6215-M-N1-LH

Manaras 1-1/2 HP 240V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
OGH-6234-M-N1-LH

Manaras 1 HP 208V 3Ph Gear Head Operator with Monitored ECB N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
OTBH-6432-M-N1

Manaras Trolley Operator 1/2HP 480V 3Ph Monitored w/N1 Photoeyes

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
  • Includes PHOTO-070
    • .......more details
PDC-300-050-1-40/50-20-CH

Pulse 300 Direct Drive Opener with Manual Chain Hoist 1/2 HP 1" Shaft 110/240V 1ph 40:1 20' Cable

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
BGARM12ART84

LiftMaster TECHNA Barrier Gate Arm 12 ft w/84" Clearance without LED

  • 12’ Functional length arm with an 84” articulated clearance height from the base of the arm
  • All parts ship in a single carton box for convenient transport and storage ensuring easy on-site assembly. The arm is field-customizable for added flexibility.
  • Made from durable aluminum extrusion with secure fasteners for a reliable fit. Arm joint uses bolts nuts and washers for stability and are reinforced by a torsion bar for added strength.
  • Operating Temperature: -13°F (-25°C) to 140°F (60°C)
  • Requires TECHNA PARKING operator.
26004A.S

Genie Bolt Retainer

  • The bolt retainer is used with the bolt that secures the pulley bracket to the pulley support
LB410-14SF/P1

Steel Faced Laminated Bumper Black 10" x 14" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
41D0236

LiftMaster keypad replacement kit for EL25 and EL2000

  • This replacement keypad features a 16 button face with weather protection gasket
  • fits Elite series EL2000 and EL25 access control systems
  • Also known as: 041D236 180D0236 00000000000180D236 180D236
026-M12-F5

Blue Giant Cable M12-4 5M Female Leads

  • 5 Meter Cable for Proximity Sensor
Z9962

Standard L5 Operator Mounting Bracket

  • Standard Jackshaft and Hoist Operator Bracket
  • Compatible with most Liftmaster® Logic 5 Genie and Overhead Door Brand Jackshaft and Hoist operators
  • Accommodates torsion shafts from 1" to 1 1/4"
E/1929/025

Automatic Systems Bumper and Limit Switch Ass'y (BL229)

  • Used on the BL229 gate op.
G-40X13-134-CHRCL

Thermal Window Clear 40" x 13" for 1-3/4" Garaga Door Charcoal

  • For 1-3/4" thick door
1404-16FT-BLK-XL

Residential Side & Top PVC Weather-Strip with cap 16' Long - X-Wide Black

  • Extra Wide Profile 2-1/2" wide
  • Flexible co-extruded cap to hide screws
  • Dual Fin PVC that seals against the door
  • Material: Rigid PVC / Flexible PVC Co- Extruded
  • Colors: Black Brown Bronze Cream Sandstone White
  • Lengths: 7′ 8′ 9′ 10′ 12′ 16′ 18′
    • .......more details
2806.182*290

Whiting Spring Assby .182 x 2-3/16 x 29" Roadside

  • Replacement torsion spring with cones
  • Specs: .1182 x 2-3/16" x 29" Long
  • Roadside
  • For Curbside order part # 2807.182*290
38252A.S

Genie Opto Wheel

  • The opt-wheel normally needs replaced if your garage door opener is short traveling in both directions (open and close) in the excess of 6 inches at a time then stopping.
  • Compatible with models: 1028 2028 1128 2128 1035 1055 2036 2035 2055 3035 3055 2033 3053 3155 7035 7055 7053 7135 7155
7-6093BL

RW Bottom Cane Bolt 524 x 2 Black 1 only

  • Black plated
BCSI-PM206

Pivin Drapeau Traction Chain #50 BCSI Gate Operator Sold per Foot ** Price by Quote Only

PRO-HBH-10083U-R

Micanan 1 HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 1 HP208V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
RB-TX20

Miller Edge RBand Wireless Edge Transmitter

MGH-6533-M-N1-RH

Manaras 3/4 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
  • MOD050 to add the friction clutch (sold seperately)
Specification Sheet Drawing Diagram
7909212

FAAC Control Panel Main Circuit Board for FAAC 844

502290

Trac-Rite Tube Astragal 502290 Sold per Foot

MT21-2M-BLACK-LH

Miller Edge 2-Wire Monitored Pressure Sensitive Edge Black Left Hand Outlet Sold per Foot

  • Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
31120-112-3/8

Doorlec Sprocket 50B36 1-1/2" Bore 3/8" KW

  • 36 tooth sprocket
26142

Doorlec Cam Shaft Threaded 5/8" x 7-1/4" w/Sprocket GHX

  • Explosion Proof rotary shaft 1.59cm x 18.4cm
2200-367

Linear Chain Tension (Light) Spring

  • Used on various Linear Gate operators
24040

Doorlec Roller Chain #40 Sold per Ft

1224-1-3/8"-BLK

Elton Commercial Window for Flush Doors 1-3/8" thick 1224 Black Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 25-1/8" x 13-1/8"
  • Cut-out size: 24-1/16" x 12"
  • Vision area: 21-11/16" x 9-5/8"
  • Different glass options and frame colours are available upon request
    • .......more details
1222_DUAL_TROLLEY_12'

LiftMaster Dual Trolley kit for 12' high door includes #41 Chain for 12ft High Door Angle tracks (2x) 12' and (1x) shaft

  • Provides a second drawbar-type operation on wide standard door
  • Includes 12ft tracks #41 chain hardware & Round Bar 1" x 20'
  • Works with TDC12 & TDC22 Maxum operators
38000063

Tork Winch Electric Motor 1HP 115V 1Ph

  • Replacement electric motor for TW 1200
2806.177*340

Whiting Spring Assby .177 x 2-3/16 x 34" Roadside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 34" Long
  • Roadside
  • For Curbside order part # 2807.177*340
50308

Doorlec Cam Shaft Assembly Comes With Bearings

  • Fits LJ LJH SGO
WHITING-RV

Whiting Stainless Steel Rivet Option for Dry Freight Door

  • Upgrade option
22-002641

Ratchet Bar Only for Holdown Assembly ** Price by Quote Only

  • Ratchet bar only for the ratchet assembly#22-003769-1
10TD900HH1

BEA 1-Button Transmitter 900 MHz

  • Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
  • It also provides better penetration of obstacles.
  • Operating temperature: -10 to 55C
  • IP65
PPK3PHM

LiftMaster Passport MAX 3-Button Keychain Remote w/Proximity Sensor

  • Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufacture since January 1995
  • 3-button keychain remote with proximity sensor
  • 2x the range of standard remote controls
  • Narrow-band transmission
12118

Doorlec Commercial Aluminum Sliding Carriage

  • Works on Doorlec trolley operators
E/1929/234

Automatic Systems Rod Lever Assembly (BL229)

  • Used on the BL229 gate op.
OSHW-6112-M-N4-R

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
    • .......more details
MQ00009

Micanan Set Screw 1/4"-20

15-80B60YMP

Sprocket 80B60T 2.0B 2X 1/2-13"

  • Also known as: 158060
MOTOR257

Manaras Electric Motor TEFC for N4/12 1/2HP 120/240V 1PH

  • Continuous-duty base mount TEFC 60Hz
  • For N4/12 type operators
41B6228

LiftMaster Mounting Bracket RJO

  • Also known as: 041C0902 41A6228 41C0902 41B6228
GAREX-24X12-CBRN

Garex Thermo Window Clear 24" x 12" Commercial Brown Frame

  • An original Garex window
  • Fits 1-3/4" thick door R16
CRBH505L5R

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 with Carwash Modification ***No Longer Available

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
K41-0243-000

LiftMaster Output Sprocket IHSL24UL

  • Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators
5001-16-SANDSTN

Residential Side & Top Weather-Strip 16' Long - Sandstone

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
MD00027

Micanan Disconnect Coupling 3/4" ID PRO-J/LJ

  • Sold individually
OTBH-6212-AM05

Manaras Trolley Operator 1/2 HP 240V 1Ph Monitored Board w/Eyes Apt. Model

  • The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
  • 100 cycles per day
  • It incorporates a drum-shoe type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • #41 full roller chain
  • Includes monitored N4X eyes (PHOTO 061)
    • .......more details
BCSI-PM21

Pivin Drapeau Flat Washer 3/8 Special *** Price by Quote Only

41A3589-2

LiftMaster 10ft Belt Assembly for Models '93-2000

  • For use with LiftMaster belt drive models 1270 1280 1280R.
  • Full belt assembly
  • For use with Chamberlain belt drive models 8100 8200 and 9200.
  • For standard 10 foot high garage doors
  • T rail assemblies ONLY.
GALV-331-334-R

Cut-to-Length Torsion Spring .331 x 3-3/4" Right Hand Wound Galvanized Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-331-334-L

Cut-to-Length Torsion Spring .331 x 3-3/4" Left Hand Wound Galvanized Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-306-334-L

Cut-to-Length Torsion Spring .306 x 3-3/4" Left Hand Wound Galvanized Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
GALV-250-334-R

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-334-INSTALLED
GALV-243-334-L

Cut-to-Length Torsion Spring .243 x 3-3/4" Left Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-334-INSTALLED
DOCK-SEAL-R100

Dock Seal R-100 Fixed Header Seal Price by Quote Only

  • Made to order - Price varies according to specifics
  • This model is ideal for door openings of 8′ wide x 8′ high
  • Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
  • 40 Oz Vinyl
  • Comes with full height yellow guide strips and option for wear flaps
  • Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time
    • .......more details
K41-0375-000

LiftMaster 24VDC Motor Gear Box Encoder (Jackshaft 1200)

  • Maxum J-1200
OSH-6534-M-N1-LH

Manaras Opera-SH 1 HP 600V 3 Ph Monitored Board w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
OSH-6532-M-N1-LH

Manaras Opera-SH 1/2HP 600V 3Ph Monitored w/ N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
GALV-225-2-L

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Galvanized Ornage/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
E/1929/023

Automatic Systems Balance Spring Ass'y 5.5 MM BL229

  • Used on the BL229 gate op.
OSH-6114-M-N1-RH

Manaras Opera-SH 1 HP 120V 1 Ph Monitored w/N1 Eyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
OTBH-6212-M-N1

Manaras Trolley Operator 1/2HP 240V 1Ph Monitored w/N1 Photoeyes

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
  • Includes PHOTO-070
    • .......more details