Devanco Canada - Get The Right Garage Door Opener‎ and Parts

1104-9FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 9' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.

1104-10FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 10' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.

.375_6"-RH

Torsion Spring .375 x 6" x 12ft RH Yellow/Green

Wire size: .375
Inside diameter: 6"
Length: 12 ft

18-RWB-PAIR

Winding Bars Round 18" Set of 2

Cold rolled hardened steel.
Machined to 7/16" at one end with 1/2" outside dia. on the other.
Sold as a pair.

AK-21

Linear Interior Digital Keypad***to extent of inventory

The keypad is housed in a rugged plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright easy-to-read yellow graphics.
It is supplied with four different plastic snap-on mounting bezels to customize the look of the keypad. The satin-chrome bezel comes factory installed on the keypad. The white ivory & bronze bezels are packaged separately.
Up to 480 entry codes from 1 to 6 digits in length can be programmed. They can activate either or both of the relay outputs.
Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for timed or latch-on/latch-off toggle operation per each individual entry code.
The on or off toggle state of a relay is maintained even after power interruption. When power is restored to the keypad each relay will assume the state it was in when power was removed.

Installation Manual

26-94321

Truck Door Bottom Panel with Seal (11" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

91-00400

Truck Door Step Bolt 1/4"-20 x 1.25" (3/4" head)- Sold Per Piece

Zinc plated finish
Cross Reference: T #80015-1610 120250

42GRR-9002

Allen Bradley Series 9000 Photoelectric Sensor Thru-Beam Receiver Unit

nput: 70-264VDC/AC

OTBH-6213-1-M-N1

Manaras Trolley Operator 3/4 HP 240V 1Ph Monitored w/N1 Eyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

PL-A23-RPM-BRKT

Lynx RPM Reader Board Bracket Only

STAR450-390

LiftMaster Commercial Access Control Receiver 390MHz *** To Extent of Inventory

Rapid learn feature programs multiple transmitters in just seconds
Ideal for gated communities parking lotsand garages.

Programming Instructions Sell sheet

SCREW002

Manaras 1/4"-28 x 1/4" Set Screw

053158

Rotating Beacon 4" Amber 12-110V DC

IP Protection: IP56
-30 degree celsius to + 50 degree celsius extreme temperature reliability
small format only 2.5" wide

2'6X6PO50

Devanco Loop 2'6 x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

8FT-RAIL-BELT

LiftMaster 8' belt drive rail 2778BD - colour code: White

Price reflects cost if purchased with an opener

Q089

LiftMaster Trolley Body Assembly Kit K75-50147

For Liftmaster trolley operator HCT
Kit includes: trolley body cover trolley wheel shaft installation screws ring clip plastic plugs and lock with keys set

.273_2"-RH

Torsion Spring .273 x 2" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 2"
Length: 12 ft

GALV-273-258-L

Cut-to-Length Torsion Spring .273 x 2-5/8" Left Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

O02R9205

AirLift Top Cap Complete w/Seals

.343-514-L

Cut-to-Length Torsion Spring .343 x 5-1/4" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-525-INSTALLED
If cones are required a filler must be added use part # FILLER

2376.192.29.910

Whiting Torsion assembly .192 wire size 29" spring length 91" shaft

This is a full balancer assembly

CAMPLATE019

Manaras Cam Plate Opera C-Box

T2B-DS

Lynx 2-btn Transmitter Dip Switch 303 MHz

Ultra secure mid-size transmitter with 8 dip-switches for coding
2-buttons provides control for 2 Lynx operators
Compatible with HomeLink in-vehicle remote control
Can be mounted on visor with saddle clip or carried on a keychain
Visor clip and 12V battery included
Will work with Lynx residential operators built from 2000 and up.

.......more details

Compatibility chart

1015-1-3/4-14'

Rigid Vinyl Bottom Retainer Raised Centre 14' Long

Black - for door thickness of 1-3/4"

7001-10-BROWN

Commercial Side & Top Weather-Strip 10' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

71-90503000

LiftMaster Non-Resettable Counter Field Kit

A 6-digit non-resettable 24VAC electro-mechanical counter is mounted in the operator control enclosure.
This devise counts the number of times the CLOSE coil is energized or whenever the operator reaches an auxiliary open limit switch.
This corresponds to the number of complete door cycles of use.

Installation Manual

1003-1-5/8-12'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

.312_6"-LH

Torsion Spring .312 x 6" x 12ft LH Yellow

Wire size: .312
Inside diameter: 6"
Length: 12 ft

27175B

Genie Carriage Slide Only

Carriage NOT included. Carriage part number 20462R
Compatible with Genie GPS and PMX belt drive models

.437_5-1/4"-RH

Torsion Spring .437 x 5-1/4" x 12ft RH Red/Green

Wire size: .437
Inside diameter: 5-1/4"
Length: 12 ft

27-20306

Truck Door Balancer Bracket Clamp for Whiting Roll-Up Doors

Steel construction
Plain finish
Clamp includes nuts
Cross Reference: W #2526 for both #2376 & #7176 balancers

87-P-075

LiftMaster Turac 3/4" Push on Fastener

.250_2-5/8"-LH

Torsion Spring .250 x 2-5/8" x 12ft LH Green

Wire size: .250
Inside diameter: 2-5/8"
Length: 12 ft

109007.3901.S

Overhead Receiver 390 Mhz

9 switch trinary fixed code 3-wire gate and garage door receiver

95358

Marantec Front Idler Assembly

Complete Roller holder assembly for ML-Series rails
Used for belt and chain drive opener rails
Same as # 8030432

SF375

Spring Fitting 3-3/4" Pair (Long Ear)

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
Winding bar hole 5/8"

.......more details

112498.0001.S

Genie Release Kit Expf *** Price by Quote

5001-WG-14-MOAK

Residential Side & Top Weather-Strip 14' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

.406_3-3/4"-LH

Torsion Spring .406 x 3-3/4" x 12ft LH Blue/Yellow

Wire size: .406
Inside diameter: 3-3/4"
Length: 12 ft

H14G04

Hinge #4 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#4 position
Use between sections 4 and 5
Same as part number 244

.......more details

838

Skylink Transmitter / Receiver Set Rolling Code ***NLA

Generates new code each time you push the button these codes never to be repeated.
99.99% works with most brands of garage door openers.
Ideal replacement for older or obsolete models.
Electronic scanners "code grabber" cannot duplicate the operating code.
Easy to install & program.
Works as a secondary receiver (both original existing receiver and 838 receiver will work simultaneously).

.......more details

.343_5-1/4"-RH

Torsion Spring .343 x 5-1/4" x 12ft RH Blue/Red

Wire size: .343
Inside diameter: 5-1/4"
Length: 12 ft

PRO-HB-7583U-LH

Micanan 3/4HP 208V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

1013-1-1/4-24'

Rigid Vinyl Bottom Retainer L-Shaped 24' Long

For door thickness: 1-1/4"

27-20127

Truck Door Spring Spacer 35" long for Whiting Roll-Up Doors

Extruded PVC construction with zinc plated thrust washer.
Cross Reference: 2471

1104-10FT-CLAYSTN

Residential Side & Top PVC Weather-Strip with cap 10' Long - Claystone ** NOT AVAILABLE

Claystone rigid vinyl retainer with claystone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

.243-134-L

Cut-to-Length Torsion Spring .243 x 1-3/4" Left Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

MB-01003

Micanan Electric Motor Only 1/2HP 110/220V 1PH C-Flange TEFC 56C

C-Flange TEFC electric motor
Fits models: GT GH GHC & GSD

T-833-C-OCS

Allstar 3-btn 3-Door O/C/S Transmitter 109025-311 MHz****NLA

Open/Close/Stop remote for 3 doors
Compatible with 3-channel Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Slide switch selects door to operate
Power: 9-volt battery

.......more details

Programming Instructions

DL-4000-6

Dock Leveler Retainer Galv. Steel Weldable 6' Long *** To Extent of Inventory

Weldable to sides of dock leveler
Use with 4007 aluminum retainer & light brush (not included).
Vinyl insert slides into this outer retainer.

32-48-100

Extension Spring 8' Door - 100 lbs Tan ** Replaced by 27-48-100

Double - Loop
32" long 48" stretch 100 lb load
Springs sold individually

Spec Sheet

.243_1-3/4"-RH

Torsion Spring .243 x 1-3/4" x 12ft RH White/Yellow

Wire size: .243
Inside diameter: 1-3/4"
Length: 12 ft

19-5116-NP

LiftMaster Trolley Roller Chain Pack #41 for 16ft Door Nickel Plated

For 3/4 & 1 HP trolley operators

19-50ML-NP

Master Link #50 Nickel Plated

75-10174

LiftMaster Trolley- Front Idler Assembly

Also known as: 7510174 305115018 711150181 175017 71115211 75-10174

41A7619-4

LiftMaster Cover for 8557

MJ00001

Micanan Brake Shoe - Left **No Longer Available**

Only available in complete kit # MJ00013 or MJ00014 for PRO-GH

4008-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree 5/8" Offset *** To Extent of Inventory

2" Offset
For use with Light Brush or Vinyl Insert

7001-10-W/B

Commercial Side & Top Weather-Strip 10' Long - White/Black (WB)

White galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

041-0203-000

LiftMaster Light Pod Kit Single Lens No Camera Model

Light Pod Replacement Kit. For use with various Chamberlain® Single Lens Belt Drive and Chain Drive Garage Door Openers featuring myQ® technology and no video camera; manufactured after 2021 only.

39153R.S

Genie Optical Encoder AC Screw Drive Models

Compatible with models; 2562 2564 2568 PowerLift® GPower 900
Also called the RPM sensor it is used to resolve the issue of short travel problems or drifting limits on the garage door opener.
Single & Dual encoder

MP-00040

Micanan High Cycle Modification Jackshaft Models PRO-J / H only

For installations with high frequency usage
Double V-belt cast iron flanged precision bearings on all shafts and delay on reverse circuit
Supplied with #50 chain

510.5377.00

Whiting Side Seal Option for Dry Freight Door

A extra option when ordering a Dry Freight door
When purchased alone use part number 5377.115

27-48-300

Extension Spring 8' Door - 300 lbs Tan

Single - Loop
27" long 48" stretch 300 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

684-33-104-A

Universal Bracket 2.25" x 2.5" x 12" w/1" x 12" Plate

1104-7FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 7' Long - White (W)

White rigid vinyl retainer with white flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

S142ARNN115

Carlo Gavazzi Amplifier 115V

Processor controlled amplifier for one set of photoelectric sensors type MOFTR.
11-pin circular plug for easy connection.
8A SPDT relay output NPN/ PNP transistor output or alarm output.
Diagnostics for sensor test during operation.
Alignment help via LED or alternation of alarm output.
Level indication for dirt accumulation.

.......more details

HSO112

Hinge 1/2-Hinge OHD "A" Style 12-ga Stainless Steel

Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
Laser Cut for a Clean Finish

22653

Doorlec Momentary Contact/Plunger Switch Black

MT21-2M-BLACK-RH

Miller Edge 2-Wire Monitored Pressure Sensitive Edge Black Right Hand Outlet Sold per Foot

��Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

PRO-TB-7583-U

Micanan 3/4HP 208V 3 P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

19-41ML

Master Link #41

For #41 chain
ANSI Standard Carbon Steel

.393_3-3/4"-LH

Torsion Spring .393 x 3-3/4" x 12ft LH Orange

Wire size: .393
Inside diameter: 3-3/4"
Length: 12 ft

27150A

Genie Chain Bullet

Compatible with: Genie – PMX60 PMX65 PMX80 PMX85 PMX300-IC/A & B IC250 IC250B PMX500-IC/A & IC/B ALC SERIES RCD SERIES
Overhead Door – 496 496CD (/A&B ) 696 (/A&B) 777 777CD
PASSPORT 286-386 286CD-386CD
Connects the two chain ends and also is the piece that the carriage engages

C184-24B

Coil Cord 4 Wire 18-Gauge Black Extends 24ft

G65-19084

LiftMaster Thermostat Control Heater Fin Type for 208V-460V Gate Operators ** Discontinued

Heater used in BG type gate operators

Installation Manual

MB-03001

Micanan Electric Motor Only 1 HP 110/220V 1PH Base Mount O.D.P FR56

Base mount motor fits: T TB APT J EJ H EHJ HHD SD

OTBH-6112-M-N1

Manaras Trolley Operator 1/2HP 120V 1Ph Monitored w/N1 Photoeyes

The OTBH is a heavy-duty low headroom trolley operator
Designed for use on industrial standard lift sectional doors
It incorporates a drum-band type solenoid brake
25 cycles per hour 80 cycles per day
1/2 HP operators come with # 48 (410) roller chain
Includes PHOTO-070

.......more details

ED-1300

Devanco Citrus Degreaser & Cleaner 425g

This special blend of solvents is designed to quickly and effectively loosen and dissolve grease oil and dirt from metal parts
Leaves no residue
Pleasant citrus scent

Material Safety Data Sheet Fiche Signalétique

K72-12591

LiftMaster Clutch Shaft Kit HMJ

37380

Doorlec Auxiliary Contacts BF9 Contactor

10TD900INDHH2

BEA 2-Button Digital Transmitter Nema 4 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
IP65
Operating temperature: -10 to 55C
Controls one 10RD900 receiver

HW-SP-BL

Lynx Disconnect Spring

Q170

LiftMaster Control Box Cover HCT K75-50190

Replacement Control Box Cover Q170.
Compatible with LiftMaster® Model HCT Overhead Gate Operators

GHX-311-1-RH

Doorlec Explosion Proof Gear Head 1 HP 120V 1PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

SA1929/A51

Automatic Systems Board w/Battery Assy for BL229

MDKP

Linear MegaCode Exterior Wireless Keypad 318 MHz

MDKP can transmit a unique signal for each 1-6 digit PIN code entered.
It has a built-in radio transmitter with a 250-foot range in line-of-sight conditions.
Access codes are programmed into the access controller or receiver the maximum number of codes possible depends on the receiver model used.
Features Include:
Internal antenna
1-6 digit PIN for each user

.......more details

Installation Manual

7176.218*29.90

Whiting Heavy Duty Torsion Assembly .218 x 29" shaft 90"

PRO-APT-5053-U

Micanan 1/2HP 575V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board

MODKIT003

Manaras Time Delay Kit 1.5 Sec For Contactor Models

MODKIT003 for field upgrades
Order MOD003 when ordered in conjunction with a commercial operator

GHX-6432-CONT-LH

Manaras Explosion Proof Gear Head 1/2HP 480V-3P Contactor Left Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station

26CW94623-CUT

Truck Door Top Panel Painted White (13" x Cut-to-Size) for Whiting DryFreight

These panels are cut to an extra wide width to fit wider vehicle applications
Interlocking tongue and groove design for weather-tight joint and proper alignment.
Non-routed
.75" thick 7 ply exterior grade medium density plywood
Painted white

MP-00010-U

Micanan Auxiliary Limit Switch for Monitored ECB

Installed to control auxiliary device

4006-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree *** to extent of inventory

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

LVB620-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details