Devanco Canada - Get The Right Garage Door Opener‎ and Parts

34030308

Polyester Lifting Sling Type 3 Eye / Eye 3" x 8'

2-ply
Minimum tensile strength of 9800 lbs per inch of width

LB412-12

Laminated Bumper Standard Black 12" x 12" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

MK00188

Micanan Auxiliary Contact Block

111914.0002.S

Overhead Sprocket 28T 1/4P 501 D-Bore

Sprocket for the limit shaft
For the 1/2 hp 3/4 hp & 1 hp hoist RHX operator.

41A7920-2

LiftMaster Hardware Kit

FHKS3D-86

Stainless Steel Face Hardware Kit 3" Track Double End Stile 6 Panel 8 Sections

Kit includes: Top & bottom fixtures center hinges end hinges and self drilling hinge screws
All hardware is heavy-duty 12 ga material
Kits are configured for up to 2" door thickness. Other door thickness are available by request.

SSZP15-6-114

Solid Shaft 1-1/4" Keyed 15'6" Zinc Plated

Actual length is approx. 15'-6"

BELT-GEAR

Skylink Belt Gear for EQ Operators 210131 ***NLA

New model # 210131 no cover is needed
Metal Gear

7001-14-CHARCOL

Commercial Side & Top Weather-Strip 14' Long - Charcoal (H)

Charcoal galvanized steel with charcoal dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

SNS1P6

Belden RG6 Co-axial "F" Male connector Snap-N-Seal

5001-10-BLACK

Residential Side & Top Weather-Strip 10' Long - Black

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

5001-7-BLACK

Residential Side & Top Weather-Strip 7' Long - Black

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

07-8058

LiftMaster Crank Link BG790

5001-WG-9-MOAK

Residential Side & Top Weather-Strip 9' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

750

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 3/4" (#3PT) 1000/Box ** Indef. delivery

Indented Hex Washer Head
7/16" Head
Max RPM = 2000
#3 point = long cutting edge (less thread)

27-20003

Truck Door Dual-Spring Shaft 87" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
Cross Reference: W #2528

VFD-MOD

Micanan Variable Speed Modification Up-Charge for VFD Operators

Variable Frequency Drive modification for commercial operators
Whenever the primary power is 575V must add MX00164 panel

PBTL3-BLACK

Replacement Button Only - N/O Open / Close Black

N/O switch and rubber cover for PBTL-3

3-26-1

Half Hinge Type S Service Type Door ** Available to Extent of Inventory

Half hinge type "S"
16-gauge

T-832-M-H

FL-Heddolf 2-btn Mini Transmitter P219-2K-311 MHz (T-832-M-S)

Open/Close mini remote for 2 doors
Keychain and 12V battery included
Compatible with Keystone T-832-H and old Allstar T-832
8 dip switch
Same as P219-2K

Manual

K001A3200-2

LiftMaster Gate Receiver Isolation Kit

Isolates the 850LM receiver from the ground loop and prevent the fuse from blowing.

5-30-6

3" Vertical Track 12-GA 11'-4" (12' door) Sold per Pair

Pierced track

H12G11-SS

Hinge #11 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

TL-50ML-BLUE

Threadlocker Blue 50ML *** Price by Quote

Medium strength
This product cures fully in 24 hours and can be dissembled with hand tools.
This product is an anaerobic adhesive applied by drops to the threads of fasteners. It then cures to a hard thermoset plastic that locks the threads together.
For metal to metal applications only

V3564-00-W-200

Vinyl Seal 4" Bottom Bead End Grey 200' Spool

Bead diameter 3/16" - 7/32" +/- tolerance

CS303-C-1

EMX Car Sense Vehicle Detector Control Unit *** Replaced by LRS-C1

The CarSense™ 303 features advanced 3-axis magnetoresistive sensing technology.
The sensor measures Earth’s magnetic field and responds to disturbances caused by ferrous objects.
The CS303 combines this exciting new technology with a fieldproven hardware platform to produce a high-sensitivity compact and cost-effective solution for reliable vehicle detection.
Three sensing elements provide magnetic field measurement in the X Y and Z axes improving detection sensitivity.

MCT-1

Linear 1-btn MegaCode Visor Transmitter 318 MHz ** To Extent of Inventory

Activates one 318MHz MegaCode receiver
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery incl.
Codes: 1000000+ (MegaCode format)
Dimensions: 2.16" W x 3.75" H x .95" D

.......more details

MD-00031

Roller Chain #40 Nickel Plated Sold by the Foot

.437-6-L

Cut-to-Length Torsion Spring .437 x 6" Left Hand Wound Red/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

C-600-114-INSTL

Cones 6" 1-1/4" bore Factory Installed (Pair)

For do-it-yourself installation use part no. SF600-114

K72-34818

LiftMaster Limit Shaft Kit SL575/585

Complete with: Limit Shaft Limit Nuts Limit Bearings Limit Sprocket Shim Washers Compression Ring Roll Pin and E-Ring.

MGS20-B-2U-05

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 5ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

MGS20-Y-2U-06

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 6ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

PRO-TB-7523-U

Micanan 3/4HP 230V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

MX00140-NEW

Micanan Brake Assembly for PRO-TB/APTB NO Solenoid - New Model (SBR-N1-00-TTBPAPT)

MOTOR275

Manaras Electric Motor 1HP 208/460V 3PH

Continuous-duty base mount
This item is compatible with BRAKE011

RA-AD-WKP-10

Lynx 10-btn Wireless Keypad AD455 372 MHz

Compatibility chart

25-01434

Truck Door Stainless Cables 110" 1/4 nylon eye 7x19 Pair for Roll-Up Doors

Works with both Whiting and Todco doors
Nylon eye ends are used 1/4" and 7/16" eye cables
Cross Ref: W4020-1

MX00145

Micanan Brake Assembly for PRO-APT Solenoid NOT included ** DISCONTINUED

Discontinued. Use part number MX00140

PBS3-BLACK

Replacement Button Only - Black. ***Discontinued

Replacement button for 02-403P

MK-00011

Micanan Radio Control Terminal Strip

MOUNTSHAFT010

Manaras Hoist Shaft Kit for MJH (pre-1998)

Drawing

PB-BE102BP

Contact Block N/C Contact Plastic Enclosure *** No Longer Available No Replacement

Base mount

7001-WG-10-MO

Residential Wood Grain Side & Top W/S Medium Oak 10' Long - Painted Screws to Match

Medium Oak retainer with Medium Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-7-CO

Residential Wood Grain Side & Top W/S Cherry Oak 7' Long - Painted Screws to Match

Cherry Oak retainer with Cherry Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

MK-00061

Micanan Time Delay on Reverse 1.5 sec. 24/110V

In closing cycle door will stop for 1.5 seconds and reverse to fully open

TC134-14

Top Cap 1-3/4" 14 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

TC134-12

Top Cap 1-3/4" 12 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

TC134-10

Top Cap 1-3/4" 10 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

HDC-411-LH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Left Hand

1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
Solid state circuit board Lynx-6000. Built in 1.5 second delay.
5L V-belt primary reduction #50 drive chain and sprockets.
Adjustable friction clutch magnetic solenoid brake.
Precision pillow block bearings on output shaft.
Fully driven adjustable limit switches.

.......more details

Sell Sheet

CONTACTOR043

Manaras Reversing Contactor Allen Bradley 16A-24VAC

AB #100-C16*10

MO00001

Micanan Cam Plate Compression Spring (.178 ID)

2 required per operator
.178 ID x 032G x 55L)

K001A6426-1

LiftMaster Control Board with Mounting Bracket for LA412

1003-3"-PER-FT

Bottom U-Rubber 3" Black Sold per Foot

414001

Linear 4-Channel Multi-Code Visor Transmitter 300 MHz

Compatible with 300 MHz Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches
Power: 9-volt battery
Codes: 512 codes for each channel (set by dip switches)
RF frequency: 300 MHz

.......more details

Installation Manual

IG2-K10-30

Invisi-Guard-2 Photo Eye Kit 30ft Battery Powered *** Discontinued

The Invisi-Guard-2 thru beam photo optic system sends an invisible beam of light from a transmitting unit to a receiving unit.
The light beam is intended to function as a protective line guarding a potentially hazardous zone.
When the light beam is interrupted by an obstruction a signal is sent to the motor controls to stop or reverse motion
Universal Design Works with Pre and Post 2010 Operators
Spans Distances up to 30 feet (model dependent)
Time Saving Installation

.......more details

Installation Manual Sell Sheet

10TD433HH1

BEA 1-Button Digital Transmitter 433 MHz

Transmitter offering means of activation of automatic doors with extended hold feature.
Delay and no-delay learn modes for either instant of delayed activation for sequencing doors.
Operating temperature: -10 to 55C
Controls one 10RD433 receiver.

27-48-320

Extension Spring 8' Door - 320 lbs Green

Single - Loop
27" long 48" stretch 320 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-380

Extension Spring 8' Door - 380 lbs Gold

Single - Loop
27" long 48" stretch 380 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-100

Extension Spring 8' Door - 100 lbs Tan

Single - Loop
27" long 48" stretch 100 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

17S

Rolling Steel 2" Flat Stamped Steel Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Does not include any rivets

MP00013

Micanan Up-Charge Track and #410 (#48) chain for 14' h Door *Actual length 198"*

For 1/3 HP and 1/2 HP operators only

MP00019

Micanan Up-Charge Track and #410 (#48) chain for 20' h Door *Actual length 270"*

For 1/3 HP and 1/2 HP operators only

9003-17FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 3" Track Bolt On 17' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

MD00009

Micanan Roller Chain #41 45 Pitch Drive with Link

Length: 4 ft

MSWIRE12GA6C

LiftMaster Dual Gate Connecting Kit 40 ft Wire **DISCONTINUED

14FW

Rolling Steel 3" Filler Endlock for Continuous

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

PL-B12-ARM-CURV

Lynx Curved Arm for Proline Operator

Used on Proline residential garage door openers

44-60-240

Extension Spring 10' Door - 240 lbs Silver ** By Quote Only

Clipped ends
44" long 60" stretch 240 lb load

IRB-SP

EMX Industries Liquid Tight Strain Relief Connectors Sold as a Pair

36605A

Genie Pulley Assembly Belt Drive *** No Longer Available

Genie 36605A PULLEY
For Belt Drive Models
For Chain lift Belt Lift ReliaG 600 & 800 1022 1024 1042 2022 2024 2042
Also for Overhead Door Models Legacy 800 & Standard Drive Belt

19-5816-NP

LiftMaster Trolley Chain Pack #48 for 16ft Door Nickel Plated ***Actual length 36ft (432")***

Chain pack only

MX00147-OLD

Micanan Complete Clutch Kit for PRO-TB Old Style Frame

Before 2006
9" Diameter

SHAFT002

Manaras Hand Crank Shaft 5/8" Sold per Foot Max. Length 12ft

Must specify exact length required when ordering

PULLEY020

Manaras Clutch Pulley 7" x 5/8"

Included in MOUNTSHAFT001 001A 007 011 and 014

PPWR

LiftMaster Passport Receiver with Sec+ 2.0 Technology

LCD Menu Screen streamlines programming for easy set-up of facility codes and bit format.
Compatible with all Standard Wiegand Protocols providing control for the security and access of your property.
IP44 Rated Housing designed for outdoor environments.
Designed for outdoor environments
Can be programmed with 1- and 3-Button remote controls offering a variety of solutions to fit your specific application needs

Installation Manual Manuel d'Installation Sell Sheet

21002

Doorlec Hoist Interlock Switch

OSH-6113-ECB-LH

Manaras Opera-SH 3/4HP 120V 1Ph with Electronic Circuit Board Left Hand *** To Extent of Inventory

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

HSC-600-JAWS

Replacement Jaws for Hand Swager

Can be used as replacement jaws for both the HSC-600 hand model and the HSC-600-B bench model

35616R

Genie Dual Frequancy Intellicode Receiver Board

For models: PCG500ML PCG700ML GCG350ML 2020L
Works on 315Mhz and 390Mhz

VMD202-100

EMX Vehicle Motion Detector Probe with 100ft Lead Wire

The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
The probe and its electronics are housed in a slim design that is buried next to a driveway.
The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
Probe assembly and wire are water tight and direct burial compatible
Harness is pre-wired onto lead wire for easy installation
Settings are placed in a non-volatile memory in case of power failure

.......more details

Installation Manual Sell Sheet

5X10SC50

Devanco Loop 5' x 10' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

29-31229

LiftMaster Relay 24VDC 30A SPDT 1-Phase only

C-relay for model T operators 10A

6X42PO50

Devanco Loop 6' x 42' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep