Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Chain Drive
CHS401-114

Chain Hoist Shaft Mount 1-1/4" Shaft 4:1 JR Torque Force (126685)

  • Shaft Mounted Junior Hoist
  • 4:1 Reduced Drive
  • Sprocket: 41B36. Bore size: 1-1/4" diameter
  • Cross Reference: OMI 4020
  • Requires minimum 3/8" center line offset.
  • Set includes: 26' of hand chain 22" of #41 roller chain Chain keeper (2) shaft collars 1/4" square key and a wall stabilizer bracket.
Sell sheet
ALUM-571

Aluminum 24" x 100' Spool Brownstone / Beige Antique # 571

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 571
  • Reverse side is #431 Bright White
Colour chart
G-21X13-134-W

Thermal Window Clear 21" x 13" for 1-3/4" Garaga Door White

  • For 1-3/4" thick door
IRB-MON-RX

EMX Monitored Receiver Board Only

  • Receiver board only for IRB-MON
LDCO800

Linear 800 Newton DC Powered Garage Door Opener Accept Both Belt or Chain Rail *Replaced by LDCO863B*

  • The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
  • DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
  • Optional Battery Backup available for added peace of mind. Sold separately
  • Low-power standby mode dramatically reduces energy consumption
  • Supplies 800 Newtons of lifting force for heavy doors
  • Compatible with belt-drive or chain-drive T or I beam rails up to 10'
    • .......more details
Installation manualSell sheetRemote compatibility chart
MG1300

LiftMaster Maglock 12/24 VDC 1300 LB Strength

  • 1300 pounds holding force
  • Equipped with an attached welding bracket and junction box with knockouts on four sides for fast and easy setup
  • Steel armature and mounting plates
  • Designed for minimum 1.5' gate frame
  • Outdoor face and side plate mounting
  • 12 or 24 VDC power
    • .......more details
KPW5

LiftMaster New Wireless Commercial Keypad 5-Code Sec.+2.0

  • Designed to work exclusively with Security+ 2.0
  • 5 permanent PINs and 10 unique temporary PINs ideal for residential and small commercial applications; unique temporary PINs can be set for 1 to 9 uses
  • Allows for removal of a single PIN while maintaining full access for other users
  • High-impact polycarbonate front cover; perfect for rugged outdoor environment
  • Blue backlit metal keypad makes it easy to use under low-light conditions
  • Electronics are fully sealed and meet NEMA 4X water protection requirements
    • .......more details
Programming instructionsInstructions de programmationSell sheetBrochureCompatibility chart
K001D8395

LiftMaster Logic 5 Board Kit - all voltages L5

  • The K001D8395 is a 1 Phase and 3 Phase L5 logic board replacement kit.
  • This kit is compatible with LiftMaster® 3 Phase Commercial Door Operators manufactured after April 2016 only.
  • This L5 logic board is Current Sense compatible.
  • All 3 Phase operators made after April 2016 will require this board.
  • For 3 Phase operators that require the Current Sense Harness use part number K21-38158
Product bulletin
NTL-400

Devanco Canada Clear Door Lube 425g Aerosol

  • Ozone Friendly Door Lubricant with anti-wear and extreme pressure additives.
  • Silicone Free
  • Non-drip clear formula provides long lasting lubrication and protection where metal to metal friction occurs. •Ideal for use on door tracks hinges springs rollers chains cables gears and more.
  • 15 oz Cans
  • Available for private label
  • Same as 400-HD
    • .......more details
Safety data sheetFiche de données de sécurité
37516S

Genie Belt only for 8ft Door

  • Replacement belt only for 8ft door
  • Fits Genie model Destiny 1200
HTR

LiftMaster Heater Kit for DC Pad mount Gate Operators

  • Heater kit for pad mount DC gate operators.
  • Includes battery bracket.
  • Protects system to -40° F and installs on operator frame
  • works on 120 or 240 VAC.
Installation Manual Manuel d-Installation
JRGX114

Chain Hoist Jack Shaft JRG V2 1-1/4" Shaft Torque Force (126690)

  • Jack Shaft Mounting plastic guide 4.5:1 reduction
  • Gear drive
  • Fits 3-3/8" minimum offset
  • Includes: 26' of galvanized hand chain - doors higher than 15' require additional hand chain
  • 1 chain keeper
  • 2 shaft collars
    • .......more details
Sell sheet
19-5118

LiftMaster Trolley Roller Chain Pack #41 for 18ft Door

  • For 3/4 & 1 HP trolley operators
MC824H/V1

Big Metro MoonClever Control Box 110VAC

ST-PROFILE

Soft Touch Profile Sold per Foot

  • Yellow air-wave edge
  • Fits most standard 1-5/8" retainers
  • 300 feet in a roll
RA-AD-WWS-MULTI

Lynx Wireless Wall Station AD455 372 MHz

  • Wireless for easy installation anywhere
  • Controls door open-close light on-off
  • Programmable pet opening (Opens to a pre-selected height of 6"-30")
  • Vacation Slide-Lock: Disables remote transmitters keyless entries and wall stations.
  • 10-second closing safety delay
  • Transmitter program button
    • .......more details
Programming InstructionsCompatibility chart
LVB420-11

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
JDMG-HOIST

GDI Axial Chain Hoist Kit Nema 4 for JDMG-LG

  • Can be added in the field
Sell sheet
JDMG-LG-2030

GDI Jackshaft DC 115V

  • Brushless DC high reliability high efficiency and low maintenance motor
  • No maintenance GearMotor sealed stainless steel bearings no limits switches no belts or no hydraulic cylinders to maintain
  • Soft start soft stop
Sell sheetTechnical document
4X16SC50

Devanco Loop 4' x 16' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
MHH-002

Magnetic Handle Set Black Set of 2

  • Decorative handles only
  • Black flexible magnetic material with deep embossed design
  • Mounts flush on door
  • Sold as a set of 2 handles
M3A

Safety Inertia Brake 1" Bore 2283 Torque PCM3AP

  • Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
  • Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
  • Fully resettable and reusable after lockout ocurrs.
  • Commonly paired with commercial safety bottom brackets in sectional door applications.
  • Fits 1" shaft
  • Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.
    • .......more details
1104-8'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 8' Long - Dark Sandstone (DDG)

  • Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
MP-00044

Micanan Drive Chain #40 Modification for Trolley Operators 18' High Door In Lieu of #41

  • Chain modification when purchased with any of the following operators; PRO-T TB APT and GT
DR2

Linear 2-Channel Delta3 Receiver 310 MHz *** NLA

  • Activates two devices
  • Wire lead antenna
  • 12 and 24 Volt models
  • Two-channel wireless radio control designed for use with automatic garage/gate operators and access control systems.
  • The receiver can be activated by any of the Delta-3 format transmitters
  • Mounting bracket supplied
    • .......more details
Installation Manual
GH101-L5

LiftMaster Gearhead with Brake 1 HP 115/230V 1P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
G7M

Skylink 2-Button Universal Keychain Remote

  • Controls up to two different garage door motors wirelessly.
  • It can be used as a keychain remote or with the included wall mount bracket or included visor clip for your car.
  • It operates most national brand garage door openers and is very simple to set up by selecting the brand using an indicator dial on the back.
  • Skylink G7M is compatible with the following garage door opener models:
  • Chamberlain and LiftMaster since 1983
  • Sears Craftsman since 1983
    • .......more details
Programming Instructions
.283-2-RH-C

Torsion Spring .283 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .283 ID: 2" Length: 12 ft
CHAINKEEPER001

Manaras Chain Keeper for Hand Chain

SOLID_SHAFT_16'

Solid Shaft 1" Keyed 16 ft Galvanized

  • Actual length is approx. 16'-1"
109099

LiftMaster Flat Wall Plate Mounting Bracket

  • Heavy 1/4" steel plate bracket used for wall mounting of side-mount operators.
  • Slots in back allow for tensioning of drive chain.
  • Mouting studs match up with mounting holes of LiftMaster Models DJ DH J MGJ H and GH operators.
79-11378

LiftMaster Circuit Board Assembly for LGJ **NLA - Discontinued 2015

  • Same as part number K79-13743
K72-12506

LiftMaster Clutch Shaft Kit (1/3 & 1/2HP)

  • For 1/3 and 1/2 HP models - L5
109837

FAAC Gearmotor for Sliding Gates Model 844 230V 1p

  • Gearmotor for sliding gates with max. weight of 1800 kg 844 ER Z16 for rack applications
  • Ideal for commercial and industrial applications
  • Anti-crushing safety
  • As the gearmotor is non reversing no electric locks need be installed
  • In the event of power failure the key-operated release device makes it possible to open and close the gate manually
  • Twin-disk clutch in oil-bath
    • .......more details
AIRSWITCH008

Manaras Metal Case for AIRSWITCH007

UCFL-1

Self-Aligning Cast Flange Bearing Football Style 1" Bore UCFL205-16

  • Grey cast iron painted.
  • Comes with 2x set-screws
  • Football style 2 bolt
49563

Stanley Chain Drive Traveler Assembly

  • Compatible with all Stanley chain drive units from 1982-present
  • Not compatible with C-Channel models
  • Assembly includes Traveler 49564 and slider 24851
69625

Marantec Programming Connector

  • Programming connector for use with M3 remotes and Wireless Keyless Entry. Also used with M13 Wireless Keyless Entry
M8-705

Marantec Photoeyes 69190 / 97246

  • Works on all Marantec units
  • Includes brackets hardware and wiring
  • Same as item #86850 97246 used to be M4-705
  • Made in Germany
Installation instructions
DD-KIT

Linear Double Delta Radio Kit (2X DT & 1X DR)

  • Kit includes two DT remotes and one DR receiver
  • Same as: DNP00006
  • Operates on 24 VAC power
  • Codes: 1024 (set by dip switches)
  • RF frequency: 310 MHz
Installation Manual
VBELTB29

Manaras VBelt 5L 29" Type B (5L320)

  • For models OPJ OHJ OPH & OSH
  • Same as 5L320
ME00057-COMPLET

Micanan Clutch Shaft Complete for PRO-APT (SCLUTCHSHAFT) MX00213

  • For model PRO-APT
CPS-RPEN4

LiftMaster Monitored Retro-Reflective Photo Eye with Nema 4 Enclosure for Commercial Door Applications

Installation ManualManuel d'InstallationSell Sheet
QUICK_CLOSE

Commercial Quick Close Device / Universal Timer V8

  • This device will automatically close the door as soon as the vehicle passes through the safety beams.
Wiring InstructionsMonitored connectionNon-monitored connection
882LMW

LiftMaster Multi-Function Control Panel Wi-Fi

  • Push button for garage door operation
  • Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
  • Light run-time is 4 1/2 minutes with adjustable light timer option
  • Lock feature designed to prevent operation of the door from portable remote controls
  • Compatible only with LiftMaster® Security+2.0™ and Wi-Fi garage door openers
  • Equivalent to Chamberlain's 41A7185
    • .......more details
Programming instructionsInstructions de programmation
PHOTO-061

Manaras Monitored Photoelectric Cells N4X (Fraba)

  • Monitored NEMA 4X enclosure through-beam type photocell
  • 4-Wire
  • Suited for industrial environments
  • Range: 45 ft
  • Supplied with 3ft of wire
Installation Manual
ER4

Carlo Gavazzi Reflector 3-1/4" (84mm) Round

  • Can be used with the PMP12RI retro-reflective detector
  • Can be used with the reflector hood
  • Dimensions: 84 mm wide 7.4 mm thick
7FT-I-BEAM

LiftMaster 7' I-Beam Rail 3707CH Colour Code: Yellow

  • I-Beam Chain Drive Rail for model 3595
STAR1000

LiftMaster Commercial Access Control Receiver Security+ 2.0

  • Security+ 2.0™ technology provides 2X the range of standard remote controls
  • Compatible with HomeLink Wireless Control System
  • 1000 remote capacity to support large quantity remote control requirements
  • Single and block addition
  • Supports suspending and unsuspending of remote controls to withhold and reinstate access
  • Designed for outdoor environments
    • .......more details
Programming InstructionsInstructions de programmationSell SheetBrochure
891LM

LiftMaster 1-btn Transmitter Sec+ 2.0

  • Controls a single garage door opener or gate operator or MyQ® enabled light accessory
  • Equipped with Security+2.0™ rolling code technology that virtually eliminates radio wave interference
  • 3V lithium battery included
  • Compatible only with Security+2.0™ LiftMaster® garage door openers or gate operators
  • Equivalent to Chamberlain's 950ESTD
Programming InstructionsInstructions de programmation
A01

Lynx Proline Drive Shaft Assembly with Helical Gear

  • Assembly includes the output shaft and nylon gear
T3B-DS

Lynx 3-btn Transmitter Dip Switch 303 MHz

  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • 3-buttons provides control for 3 Lynx operators
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Will work with Lynx residential operators built from 2000 and up.
    • .......more details
Compatibility chart
BRAKE011

Manaras Band Brake Assembly Kit

  • Does not include solenoid
  • Replacement brake kit for operators that are belt driven and have a brake. Works with OSH OTBH
  • Will not work with Gear-Head operators
Installation Manual
110554

Allstar MVP 1-Door O/C/S Receiver 318 MHz ***Replaced by P-831RE

  • Three channels - three relay outputs
  • 8-wire operator connection
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
    • .......more details
Programming Instructions
138BL

1-3/8" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1702
100BL

1" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1701
1003-3"-200FT

Bottom U-Rubber 3" Black 200' Long

  • 200ft spool of vinyl insert.
32-48-170

Extension Spring 8' Door - 170 lbs Orange ** Replaced by 27-48-170

  • Double - Loop
  • 32" long 48" stretch 170 lb load
  • Springs sold individually
  • Rated for 10000 cycles
Spec Sheet
R5211

Cast Iron Pulley 5" with stud

  • 5" Cast Iron Pulley with double stud
  • cast iron pulley mounted on two pressed sealed bearings
  • Maximum cable diameter: 1/4"
41D1739-1

LiftMaster Motor & Travel Module (041-0236-000)

  • For model: 8550
  • Also known as: 41D8006-1 41D1739-1 41D1624-1 041D1624-1 41-0236-000
GH503-L5

LiftMaster Gearhead with Brake 1/2HP 208/230/460V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
71-10345

LiftMaster RPM Sensor Board (MT only)

LMLED1

LiftMaster LED Bulb 60W Equivalent 1/pkg

  • Designed to minimize radio frequency interference
  • Daylight white light output (5000K) ideal for garage use
  • 800 lumen / 60w equivalent
  • 22-year life
  • Durable: shatter-resistant and cold weather tested to -30° F /-34° C
STEELCRAFT_PANEL_SEAL

Steelcraft Intermediate Section Seal V-Bead Sold by the Foot

PULL-CHAIN-ASSY

Pull Chain Spring and Chain Assembly 13' & 14' Doors

  • Used with a hand chain for full vertical doors.
  • Eliminates the need for leaf bumpers
  • Chain can be adjusted for smaller doors
25C20

LiftMaster Screw Drive Coupling K025C0020

84602

LiftMaster Chain Drive DC Dual LED Residential Opener

  • Integrated Dual LED Lighting System Reliable Chain Drive®
  • Motor: 12V DC 53 RPM automatic thermal protection
  • Power: 120V AC 60 Hz voltage 6A current rating UL Listed 4' power cord (3-prong)
  • Speed: 7.2" per second upward 7.2" per second downward
  • Lighting: Dual light lens LED - 1500 lumens
  • Included is the 893LM (3-btn remote) 882LMW (Multi-Function Wall Control Panel) The Protector System® Safety Reversing Sensors
    • .......more details
84602 Product Guide84602 Guide De Produit84602 Installation Manual84602 Manuel InstallationReceiver Logic Board Conversion ListComparison Chart
1224-LOUVER-WHTE

Elton Garage Door Louver Powder Coat White

  • Powder coated white for durability
  • Screen keeps bugs out
  • The standard size for the Louvers is the Elton 1224 Window
28-2103

Steel Bumper Extension Bracket 4"D x 20" Tall 12"W

  • 4" deep (projection) x 20" tall x 12" wide
D4-36

Extruded Bumper Black 36" L x 4 1/2" W x 3 3/4" H w/Metal Insert

  • Reinforced prime rubber of Durometer 75 (±5) (ASTM D2240)
  • 8.3 N/mm2 (±0.5) Tensile Strength (ASTM D792)
  • 98% (±2) impact recovery
  • All extruded fenders are supplied with a metal washer insert
  • 3 holes
MGHW-6113-0M00

Manaras MGH with Damp Area Mod (Mod081) 3/4 HP 120V Monitored Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • includes damp area modification
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
JHDC22X1BMC

LiftMaster MAXUM Jackshaft 1.5 HP Heavy Duty 120/240V 1PH 60 Cycles/Hour 2200LB

  • New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
  • Drive Type 65:1 Gearbox with #50 Chain Output
  • Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls
    • .......more details
BEA-LZR-S600

BEA LZR-S600 Lazer-Based Time of Flight Sensor

  • The product configuration provides four LASER-based curtains offering a three dimensional presence detection zone.
  • This sensor is ideal for perimeter security protection industrial automation and large industrial door / gate applications that require a wide field of detection
  • The LZR®-S600 is housed in an IP65 rated enclosure and can be installed in outdoor industrial and other harsh environments.
  • Three visible LED spots provide accurate reference points when adjusting the tilt angle.
  • Parameter adjustments can be made with a BEA universal remote control.
  • Maximum detection range of 82 × 82 ft
    • .......more details
DC300-50-1

Dyna-Hoist 300 Series Direct Drive BBU 1/2 HP 110/240V 1" Shaft 40:1 Ratio ** Quote Only

  • Special-Order. Price by Quote Only
  • Automated battery backup - the unit continues to work on batteries with full functionality (but does move more slowly) until the unit gets to about 75% of battery capacity then transitions to push and hold operation.
  • The 300 series also works with and powers 12V automatic lock systems
  • Option available: 5-conductor cable (5') to reduce the risks of miswiring incidents available in 5' 10' 15' 20' or 25' lengths
  • Integrated software fuse that shuts down the unit to help prevent board component disasters should these be incorrectly installed on grossly imbalanced or improperly sized doors.
  • 30:1 40:1 50:1 gearbox ratio are available. Please specify when ordering otherwise 40:1 will be supplied
    • .......more details
Z9408

Coupler 1" Bore Adjustable Black 170634

  • Malleable Iron for strength
  • Set screws and jamb nuts installed
  • 1" bore with 1/4" keyway
  • Thickness: 0.50"
  • Painted black
JHDC12S4BMC

LiftMaster MAXUM Jackshaft 3/4HP 480V 3PH DC Operator 30 Cycles/Hour 1200LB

  • New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
  • Drive Type 65:1 Gearbox with #50 Chain Output
  • Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls
    • .......more details
IP-MONSQ

CDVI Interior Touch Screen Monitor for IP-MDS/IP-SDS Video Intercom System (Square)

  • Interior 7" touch screen TFT monitor for use with the IP-MDS/IP-SDS intercom systems in white.
  • IP system connects through the PoE system and also has a free to download app available on iOS and Android. The VDP app allows for users to connect with visitors at the door station and can control the door locks remotely.
  • Square shape (available in rectangular shape: IP-MON)
  • SIP Server
  • Operating temperature: -10C to 55C
  • Call recording and built-in memory
    • .......more details
CDJH-12-115-CONT

Lynx CDJH Heavy-Duty Jackshaft 1/2 HP 115V Contactor Model

  • Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
  • 4L V-belt primary reduction #41 drive chain and sprockets.
  • Adjustable friction clutch Inherent Mechanical Brake included
  • Solenoid brake optional **
  • Fully driven adjustable limit switches.
  • Heavy duty 3 button wall station (Open Close Stop).
    • .......more details
LA400XL20W

LiftMaster Single Arm Solar Package for LA400 Gate Operator UL325 (Include (2x) SP10W12V Solar Panels (1x) XLSOLARCONTUL Control Box (1x) K94-37236 Solar Harness (1x) LMRRUL Photoeye (1x) K10-36183 Battery Tray (2x) A12330SGLPK Batt. (1x) LA400DC)

  • Kit Includes: LA400DC arm XL Solar control box (XLSOLARCONTU) which includes two 10WATT 12V Solar panels compatible with LA400 LA412 and LA500 Universal Solar harness (K94-37236) Monitored Retro Reflective Photos Eyes (LMRRU) Battery Tray (K10-36183) and two batteies (A12330SGLPK)
  • For dual gates order extra LA400DCS secondary arm
  • Updated unit complies with new UL325 code revised Jan 2016
K41-0410-000

LiftMaster 1200 Extended Duty Motor Gear Box Encoder Hoist

  • For Maxum Hoist 1200 Op
TDC7-16

Liftmaster Comm. 16FT Trolley Angle set (10-5816-P x 2) and #48 chain pack (TDC48-16) ***Actual length 227"***

  • Double Angle Rails for doors up to 16'6" high
  • Includes #48 chain pack
CHAINTENSDC

LiftMaster Chain Tensioner 1" MAXUM DC

  • For use with various LiftMaster® MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators; manufactured after 2023 only.
  • Spreader for Maxum operators and 1" door shaft
41B5348-2

LiftMaster Socket and Hub Kit 8360/8360W

  • Compatible with LiftMaster® Models 8360/8360W Chain Drive Garage Door Openers
GALV-319-258-144-R

Torsion Spring .319 x 2-5/8" x 12ft RH Galvanized Blue/Green

  • Wire size: .319
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
BEA-10EAGLE-ARTEK

BEA Eagle Compact Motion Sensor 6'-13' Mounting Height

  • EAGLE ARTEK is a motion sensor for all types of automatic doors. Its slim and compact design ensures discreet integration for your application making it ideal for pedestrian doors.
  • Superior field performance with improved filters that help to reduce false detections.
  • Easy to install and set up with flexible parameters and simple push-button settings. •The detection field can be adjusted without manually adjusting the antenna.
  • Max. detection range: wide: 13’ × 6.5’ narrow : 6.5’ × 7’ (@ 7’ high)
  • Temperature range: -4 – 131 °F (-20 – 55 °C)
  • Cable length: 8’
    • .......more details
Installation manualSpec sheet
BEA-10LIGHT-TBASE

BEA Modular LED Signal Base

  • To be used with the BEA-10LIGHT modules.
User GuideDatasheet
TSTL

EMX Test Loop

  • Electrical diagnostic tool for loop and vehicle detectors
  • Two-wire: red and black
  • Dimensions: 1.25 inches (H) x 1.25inches (W) x .75inches (D)
  • Compatible with most brands of loop detectors
11442

Limit Switch w/Roller Wheel Lever for MBAR

  • Used on M7BAR Ops
2022691

FAAC Control Board for Model 741

1104-18-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 18' Long - Dark Sandstone (DDG)

  • Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
VKP1-LM

LiftMaster MyQ Video Keypad

  • Create unique PIN codes and schedule access for family guests and service providers
  • Visual Confirmation: Get peace of mind by seeing that loved ones have arrived home safe and sound
  • Receive real-time notifications and view history of when the garage has been accessed by members of the household
  • Easy Installation: Enjoy wireless setup with a rechargeable battery and integrated Bluetooth® for fast Wi-Fi® provisioning
  • Call Button: Unexpected visitors can initiate 2-way audio communication with the myQ account owner to request access
  • Compatible with LiftMaster Chamberlain Craftsman AccessMaster and Raynor garage door openers made after 1993
    • .......more details
ETBH-353-1

Doorlec 1 HP 575V-3Ph Trolley OP

050ACTBMC

LiftMaster Receiver Logic Board AC WiFi

  • 050ACTBMC is a replacement Bluetooth® Enabled Receiver Logic Board Kit
  • For use with various LiftMaster® and Chamberlain® Wi-Fi® AC Belt Drive and Chain Drive Garage Door Openers manufactured 2011 to 2022 only.
  • The unit will feature a yellow learn button
  • Also known as: 1D8088-1 050ACTWFMC 050ACTWF 1D8808-3 041D80881D8088-1 50ACTWF 050ACTBMC 50ACBL1 50ACBL2 50ACBL3 50ACBL4 50ACBL5 50ACCL1 50ACCL2 50ACCL3 50ACCL4 50ACCL5 50ACBR1 50ACBR2 50ACBR3 50ACBR4 50ACBR5 50ACCR1 50ACCR2 50ACCR3 50ACCR4 50ACCR5
P-733T

Pulsar 3-btn 3-Door O/C/S Transmitter 318 MHz

  • Allstar compatible
  • Wall mount
  • OPEN-CLOSE-STOP 3 doors
  • 8 dipswitches 318 MHz
Programming instructions
P-9931R-4F

Pulsar MVP 1-Channel 4-Wire Gate Receiver 318 MHz P-111645

  • One channel
  • 4-wire operator connection
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
    • .......more details
Programming instructions
P-8833TC

Pulsar 3-btn 9-Door Transmitter 318 MHz

  • Allstar compatible
  • Nine channel transmitter
  • 8 dipswitches 318 MHz
Programming instructions
VBELT_4L270

VBelt 1/2" x 27" (4L270)

  • V-Belt not cogged
PLA10

NICE Electric Gate Lock Vertical Mount 12V

  • Required for gates longer than 3m (9.84')
  • Vertical mounting
  • Possibility of manual opening
  • Power: 12V 15VA 50Hz
HA-434TL

SkyLink Wireless Motion Sensor

  • Supervised Sensor: monitors the sensors and their battery condition automatically
  • Motion detecting range: 40 feet.
  • Operating range: Up to 800 feet.
  • Easy to set up (Battery not included).
  • FCC/IC approved.
  • Sensors are weatherproof but not waterproof. Sheltering it from the elements is recommended
    • .......more details
041-0365-000

LiftMaster Sensor Eyes and Brackets 1997-Current

  • For use with various LiftMaster® and Chamberlain® Belt Drive and Chain Drive Garage Door Openers; manufactured after 1997.
  • Complete kit includes: (1) Sending sensor eye (with LED) (1) receiving sensor eye (with LED) (2) replacement brackets and replacement hardware.
  • Also known as or Replaces: 041A5266-1 041A5266-3 41A5266-3 41A5266-1 12D584-1