Devanco Canada - Get The Right Garage Door Opener‎ and Parts

HW0429-RH

SteelCraft Commercial Bottom Bracket Right Hand Only

Right Hand bracket only
Can be used for both 2" and 3" tracks
To be used on door tracks that are installed wide enough to accomodate the side cable pulley
Door hardware must start with a #1 hinge on the bottom panel for both 2" and 3" hardware
Adjustable cable can level door from the ground
Heavy gauge steel construction
Max cable diameter 3/16"

50200

Doorlec Front Idler for ETB-3 with 410B9 -5/8" Sprocket

L-14-50-0-D

Cable Tie Standard 50 LB Black 14" Nylon 500/pkg

Ultraviolet Resistant
Length: 14.56" / Width: .180" / Thickness: .052" / Diameter: 4.125"
Low insertion and pull through force
Advanced pawl and teeth design
Angled tail provides quicker initial insertion alignment
Tail finger grips allow easier handling and tightening

.......more details

PRO-PL-7553U

Micanan Wall Mount Control Panel 3/4HP 575V Monitored ECB

If PBS on cover required an additional charge will apply
If panel not ordered with an operator an additional charge will apply
Id fusible disconnect required additional charges will apply

CH503L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 208-230V/460 VAC 3 PH Logic 5 Left Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

CP-CLUTCH-D-58

Lynx Clutch Disk 5/8"

MH00027

Micanan Collar 1/2" ID

MA011

LiftMaster Magnet

Mega Arm Steel Magnet Assembly for Cam Arm

SL595101UL

LiftMaster Dual Voltage Slide Gate Op.1 HP 115/208/230V 1 Phase - Heater NOT Incl. Reflective photocell LMRRUL included****NLA

Power: 115/208/230 VAC. Single Phase.
Accessory power: 24VAC 500mA max.
Monitored safety inputs: 3 Main Board 3 Expansion Board.
Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
Gate travel speed: 12 in. per second.
Security+2.0® on-board radio receiver: Up to 50 remote controls (unlimited with 811LM/813LM).

.......more details

Installation manual Manuel d'installation First step for installation Première étape pour l'installation Sell sheet Wiring diagram Wiring diagram 575V

Q170

LiftMaster Control Box Cover HCT K75-50190

Replacement Control Box Cover Q170.
Compatible with LiftMaster® Model HCT Overhead Gate Operators

BEA-10-1311

BEA Adaptor Plate Kit for Widescan

VPL-12

Autogate 12V Motor

MOUNTSHAFT018E

Manaras Limit Shaft Kit For Damp/Corrosive Env.

For operators with W or C Modification

RL44-40

Direct Burial Loop 6' x 16' Loop with 40' Lead-In

Used for installations under concrete asphalt pavers or in gravel roads.
The loop can be tied directly to the rebar before concrete is poured.
Wire is designed for a direct burial application.

2704.148_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .148 x 2-3/16" x 18" Long
For Curbside order part # 2705.148*180

SCLUTCHSHAFTN4

Micanan Complete Clutch Shaft Assy for PRO-HW

F520-3.15A

Fuse 5 x 20mm 3.15A 250V Fast Acting 5/Pkg

5 x 20mm miniature fast acting glass fuse
Rated voltage: 125V/250V
Rated current:3.15A
ROHS compliant
5 per package ( Clamshell)

Q028

LiftMaster Manual Crank for SL3000 (K07-50303) **DISCONTINUED

Hand crank for SL3000

PRO-GH-10021U-R

Micanan 1 HP 220V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

27020

Doorlec Electric Motor TEFC 1/3 HP 115/230V DC301

PPV3M

LiftMaster Passport MAX 3-Button Visor Remote

Provides total control with one remote for gated communities and commercial properties.
Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)

88573

Marantec Relay Power Board for M4500 Models

Same as # 83364

510.2996.07

Whiting Steel Roller Upgrade Option for 7 Panel DF Door

Upgrade option only - must accompany a door order

C-6X48-2-BLK

Thermal Window 6" x 48" for 2" Door Black

For 2" thick door

ME00054

Micanan Clutch (Input) Shaft Only for Pro-H/HHD N4 3/4" x 17-5/8" (3/4 HP-1 HP)

3/4" x 17-5/8"

MOTOR258

Manaras Electric Motor TEFC 3/4HP 120/240V 1PH

C184-24B

Coil Cord 4 Wire 18-Gauge Black Extends 24ft

10PBJL

Jamb Push Plate SS with Handicap Logo Only

1⁄16 inch thick stainless steel for maximum durability
Concealed fasteners to minimize vandalism
Compatible with both surface and flush mount boxes
Faceplate Material 16 gauge 304 2B Stainless Steel
Backplate Material 1⁄8 inch thick Aluminum
Mounting Screws Stainless Steel 6-32 × 1 in & 8-32 × 1 in Allen Head Size: 5⁄64

.......more details

PRO-APTC-5081-U

Micanan 1/2HP 208V 1P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

2376.162_18.780

Whiting Torsion assembly .162 wire size 18" spring length 78" shaft

PRO-GHC-10053U-R

Micanan 1 HP 575V 3P Gearhead Operator with N1 Eyes Monitored ECB Right Hand

External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation
Full function Smart 10.0 logic board and on-board receiver

.......more details

33102

Doorlec Overload 1.20 to 2.00 Amps

PL-A22-BOARD

Lynx RPM Reader Board Proline

MH00096

Micanan Flange Bearing 3/8" ID

Replaces MH00019

MOUNTSHAFT017

Manaras Clutch Shaft Kit for MTH MTBH (no pulley) Old Pre-1998

Input / clutch shaft kit for MTH MTBH
For old MTH MTBH with 1" diameter input shaft no pulley included

20104

Doorlec Coupling Spring 5/8" LJH

25-01426

Truck Door 1/8" Stainless 97" 1/4 eye 7x19 Pair for Roll-Up Doors

Works with both Whiting and Todco doors
Nylon ends are used on 1/4" eye cables

26CW945215-CUT

Truck Door Intermediate Panel (11.5" x Cut-to-Size ) Painted White for Whiting Dryfreight

These panels are cut to customer's exact measurements.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

.262-258-L

Cut-to-Length Torsion Spring .262 x 2-5/8" Left Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

R5207

Pulley 4" Zinc Plated Steel

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/4"
Hardened inner race

MK-00034

Micanan Overload Reset 1-Phase 5 Amps

MH00075

Micanan Shaft Collar 5/8"

PRO-GH-7543U-R

Micanan 3/4HP 460V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-GH-7523U-L

Micanan 3/4HP 230V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

111421.0004

Overhead Limit Module

111854.0004

Overhead Logic Board 3/4 - 1 HP 208 460 3PH SX/HX UL

For RHX commercial ops. 3/4-1 Hp 3- phase operators

.421-6-L-C

Cut-to-Length Torsion Spring .421 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.406-514-R-C

Cut-to-Length Torsion Spring .406 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

.375-6-L-C

Cut-to-Length Torsion Spring .375 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

MP00106

Micanan Warning Light Red/Green Remote Mount Box

.331-514-R-C

Cut-to-Length Torsion Spring .331 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-514-INSTALLED
For spring filler use part no. SPRING-FILLER

.331-258-L-C

Cut-to-Length Torsion Spring .331 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.331-258-R-C

Cut-to-Length Torsion Spring .331 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.312-334-L-C

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.306-258-L-C

Cut-to-Length Torsion Spring .306 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

.295-134-R-C

Cut-to-Length Torsion Spring .295 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.283-334-R-C

Cut-to-Length Torsion Spring .283 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.283-334-L-C

Cut-to-Length Torsion Spring .283 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.283-134-L-C

Cut-to-Length Torsion Spring .283 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.273-258-L-C

Cut-to-Length Torsion Spring .273 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.262-334-R-C

Cut-to-Length Torsion Spring .262 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.234-134-R-C

Cut-to-Length Torsion Spring .234 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.225-258-L-C

Cut-to-Length Torsion Spring .225 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.225-134-R-C

Cut-to-Length Torsion Spring .225 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.225-134-L-C

Cut-to-Length Torsion Spring .225 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.207-2-R-C

Cut-to-Length Torsion Spring .207 x 2" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.207-134-L-C

Cut-to-Length Torsion Spring .207 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

MAG-1

Magnetic Tool Box 3.5" x 3.5" x 5.25"

100lb. magnet which allows it to be easily stuck and removed from a metal surface.
Ideal for use on forklift

PRO-GH-7583U-R

Micanan 3/4HP 208V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-GH-7521U-R

Micanan 3/4HP 230V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

2807.148.180

Whiting .148 x 2-3/16 x 18" Curbside with Cones

218757

Torque Force Spring Failure Device 1" Shaft Left Hand Side DT0054

For springs 2" up to 6"
This device can be applied on Industrial OH doors that are manual or motor operated
Must be installed on a keyed shaft

PRO-GH-5043U-L

Micanan 1/2HP 460V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-GH-5021U-L

Micanan 1/2HP 230V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand (PRO GHE)

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

K77-34846

LiftMaster Hardware Kit SL575 SL585 SL595

PRO-HB-7543U-RH

Micanan 3/4HP 460V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

PRO-HB-7523U-RH

Micanan 3/4HP 230V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

PRO-HB-7521U-LH

Micanan 3/4HP 230V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

PRO-HB-5038U-LH

Micanan 1/2HP 380V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

CLIP020

Manaras Pocketwheel Roller Clip

MOTOR281

Manaras Electric Motor TEFC 1 HP 208/480V 3PH for N4/12 Applications

Electric motor only- not wired
Continuous duty base mount 56Z

PRO-H-7583-U-RH

Micanan 3/4HP 208V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

PRO-H-5021-U-RH

Micanan 1/2HP 230V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

PRO-H-5081-U-LH

Micanan 1/2HP 208V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

K72-19974-RB

LiftMaster Output Shaft & Sprocket

Kit includes: Output shaft sprocket assembly dual sprocket 32/14 sprocket 48B18x1 sprocket 50B12x1 ring washer key set screw roll pin and thin walled receivers