Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Fraba
CBG24DCGMC

LiftMaster Techna Commercial DC Barrier Gate Operator

  • 24VDC barrier gate operator with battery backup
  • Continuous-duty motor with soft start/stop
  • Exceptional starting torque and continuous operation
  • Heavy-duty motor supports 6000 cycles per day
  • Operator speed of 2.5 seconds to open or close
  • Aluminum alloy chassis
  • Built-in radio receiver
  • Arms sold separately
  • Heater sold separatel
Installation Manual SellSheetData Sheet
2110-274

Linear Clutch Shaft Assembly HSLG UPS

DC300-50-1

Dyna-Hoist 300 Series Direct Drive BBU 1/2 HP 110/240V 1" Shaft 40:1 Ratio ** Quote Only

  • Special-Order. Price by Quote Only
  • Automated battery backup - the unit continues to work on batteries with full functionality (but does move more slowly) until the unit gets to about 75% of battery capacity then transitions to push and hold operation.
  • The 300 series also works with and powers 12V automatic lock systems
  • Option available: 5-conductor cable (5') to reduce the risks of miswiring incidents available in 5' 10' 15' 20' or 25' lengths
  • Integrated software fuse that shuts down the unit to help prevent board component disasters should these be incorrectly installed on grossly imbalanced or improperly sized doors.
  • 30:1 40:1 50:1 gearbox ratio are available. Please specify when ordering otherwise 40:1 will be supplied
    • .......more details
OPH-6232-M-N1-LH

Manaras Opera-H 1/2HP 208V 3Ph with Monitored Board and N1 Photoeyes Left Hand

  • Monitored version with Nema 1 photoeyes
K17-36530

LiftMaster Gear Reducer and Motor Pulley

  • Includes gear and reducer pulley motor pulley
  • Includes dual-set screw fastener
  • Groove-lock channel on each pulley
  • For LiftMaster CSL Series commercial slide gate operators
22-002641

Ratchet Bar Only for Holdown Assembly ** Price by Quote Only

  • Ratchet bar only for the ratchet assembly#22-003769-1
201-300-401-01-REFRUB

Refurbished 201-300-401-01 Unit

41522R.S

Genie Optical Encoder (RPM Sensor) Belt/Chain Drive

  • Compatible with these Genie models that have RIDE motors (see below): 1028 1028H 2028 2028H
MOD151

Manaras 1-1/4" Output Reducer OGH 1/2 to 1HP

  • Add-on to a OGH operator
MC271-2W-RH-BLK

Miller Edge MC271 2-Wire Non-Monitored Right Hand Black Includes End Flaps - Sold per Foot

  • Ideal for Cornell double angle bottom bar
  • Flexible and will conform to floor irregularities
  • Optimum size for 2+ inch thick surfaces
  • Custom manufactured to user specifications for color length and outlet location
  • 5-inch end flaps create a complete seal and can be trimmed for custom fit
  • Sealed assembly impervious to dust and debris
    • .......more details
7176.218*325.910

Whiting Heavy Duty Torsion Assembly .218 x 32.5" shaft 91"

OSHW-6112-M-N4-R

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
    • .......more details
MQ00009

Micanan Set Screw 1/4"-20

GAREX-WINDOW

Garex Thermos Made-to-Order Size Special Order

  • Special order to suit customer's needs
TS-1-255-GALV-KEY

Tube Shaft 1" x 255 (21'.25) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
TS-1-111-GALV-KEY

Tube Shaft 1" x 111 (9'.25) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
1-0242

RW Stay Roller 68 Nylon 2-1/2" Dia

  • Special Order item
  • Reverible and adjustable for doors 1-1/2" to 3" thick
  • Steel frame Zinc plated finish
CPT210-END-KIT-U

Miller Edge Universal End Kit for CPT210

  • Kit contains: 2) Caps (2) cages (1) wired plug (1) 10K plug (1) 8.2K plug (1) diode capacitor plug (1) non-mon. plug end plug (2) screws
SPR50B42X138

Sprocket 50B42 1-3/8" KW 2SS 5/16-18

  • 42 tooth sprocket for #50 chain
ME210-C3

Miller Edge Black Rigid PVC Mounting Channel "L" Shape Sold by the Foot

  • Used on CPT-210 extrusion
BPPB17516

Garex Bottom PVC Moulding White for 1 3/4" Door U shaped 192"(16')

BPPN17516

Garex Bottom PVC Moulding Black for 1 3/4" Door U shaped 192" (16')

112357.0003

Overhead Logic Board for RSX 208 460 3PH

31114

Doorlec Sprocket 410B09 5/8" Bore 3/16" Keyway

  • 9 tooth sprocket
GALV-343-6-L

Cut-to-Length Torsion Spring .343 x 6" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
JHDC12S4BMC

LiftMaster MAXUM Jackshaft 3/4HP 480V 3PH DC Operator 30 Cycles/Hour 1200LB

  • New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
  • Drive Type 65:1 Gearbox with #50 Chain Output
  • Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls
    • .......more details
CRBH505L5R

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 with Carwash Modification

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
H11G05-SS

Hinge #5 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
GALV-343-6-144-L

Torsion Spring .343 x 6" x 12ft LH Galvanized Blue/Red

  • Wire size: .343
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized
GALV-343-6-144-R

Torsion Spring .343 x 6" x 12ft RH Galvanized Blue/Red

  • Wire size: .343
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized
IP-MDSF

CDVI Point of Entry Exterior Multi-Tenant Flush Mount Video Intercom System

  • Intercom system designed for multi-tenant residential and commercial properties providing video entry via IP with a free to download smartphone app.
  • Ideal for outdoor use on apartment buildings (up to 500 tenants) or commercial properties.
  • Features a 170 degree fisheye camera 5" touchscreen menu and integral dual technology card reader.
  • IP54 (recommended to be put under a canopy or covering)
  • Operating temperature: -10C to 50C
  • Stainless steel panel
    • .......more details
IP-SDS

CDVI Point of Entry Exterior Single Door Surface Mount Video Intercom System

  • Intercom system designed for single resident or commercial properties providing video entry via IP with a free to download smartphone app.
  • Ideal for outdoor use on single home or small business.
  • Up to 32 monitors can be connected to this device.
  • Pushing the button will call all monitors inside the building.
  • 170 degree fisheye camera single-button and audible anninciation.
  • IP54 (recommended to be put under a canopy or covering)
    • .......more details
REDUCER012

Manaras Reducer DSM 70 44:1 FR56C

TDC48-08

LiftMaster Trolley Chain Pack #48 700LBS 8ft Door

  • Chain pack only
  • TDC48-08 is a #48 Chain Pack Kit for 8 Ft. Trolley Rail Assemblies.
  • For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 8' commercial doors.
OPJ-6433-M-N1

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 480V 3 Ph Monitored ECB w/N1 Photoeyes

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
110968.001

Overhead Door Limit Shaft Kit RMX

SHAFT048

Manaras Trolley Output Shaft

BEA-35-1242

BEA 30' Harness 8-Conductor LZR

  • Power cable LZR-I100
HAE00087

Linear Safety Beam Sender & Receiver with Wire

  • Set includes: Sender and Receiver photocells wire and connectors
  • Safety beams will work with all Linear operators that currently have safety beams installed.
  • Replaced HAE00002
41A3589-2

LiftMaster 10ft Belt Assembly for Models '93-2000

  • For use with LiftMaster belt drive models 1270 1280 1280R.
  • Full belt assembly
  • For use with Chamberlain belt drive models 8100 8200 and 9200.
  • For standard 10 foot high garage doors
  • T rail assemblies ONLY.
D-TEK-LP

EMX Industries Low Voltage 11-Pin Single Channel - Dual Relay Loop Detector (2500-1)

  • Power Supply: 12-24 Volts AC/DC
  • Current Consumption: < 9 mA
  • Operating Temp: -40°F to 180°F
  • Surge Protection: Zener Diode /MOV
  • Output Relays (2): 1Amp 30 VDC
  • Loop Input: Transformer isolation lightning and transient protection (1)
    • .......more details
Manual - LP-D-TEKSpec Sheet - LP-D-TEK
K21-16699

LiftMaster Transformer 120/240V 75VA 24VAC

  • For use with various LiftMaster® Speed Jack Commercial Door Operators
SHAKER-R16

Garex Ready to Install Door Special Order

  • Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)
  • Panel Height: 18 21 and 24 inches (45 53 and 60 cm)
  • Panel Width: Up to 24 feet (732 m)
  • Texture: Woodgrain
  • Offered in various choices of colours
CLM125-HC

Linear Custom Credential Clamshell Card HID 125kHz Proximity Support 25 pk

  • Made of sturdy ABS plastic Off White
  • Complies with the Wiegand communication protocol and is compatible with certain HID prox card readers
  • Contactless: up to 8" read range
  • Supports printable 14 mil CR80 adhesive-back PVC cards
  • Sold in lots of 25
  • Same as: 830-00420
    • .......more details
BOARD076R

Manaras Replacement Power Board

  • Used on all Manaras circuit board type operators
GALV-306-334-R

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Galvanized Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
GALV-283-334-R

Cut-to-Length Torsion Spring .283 x 3-3/4" Right Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
GALV-283-334-L

Cut-to-Length Torsion Spring .283 x 3-3/4" Left Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
GALV-283-258-R

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-250-258-L

Cut-to-Length Torsion Spring .250 x 2-5/8" Left Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
GALV-250-334-L

Cut-to-Length Torsion Spring .250 x 3-3/4" Left Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-334-INSTALLED
2807.177*290

Whiting Spring Assby .177 x 2-3/16 x 29" Curbside

  • Replacement torsion spring with cones
  • Specs: .177 x 2-3/16" x 29" Long
  • For Roadside order part # 2806.177.290
2806.177*290

Whiting Spring Assby .177 x 2-3/16 x 29" Roadside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 29" Long
  • Roadside
  • For Curbside order part # 2807.177*290
CPT215-END-KIT-T2

Miller Edge End Kit for CPT215 10K Ohm Resistor (T2) Configuration

  • Kit contains: (2) Caps (2) cages (1) wired plug (1) 10K plug (1) non-mon. plug (2) screws
  • No glue is required
GALV-343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
GALV-343-334-R

Cut-to-Length Torsion Spring .343 x 3-3/4" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
GALV-243-258-R

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
Q061

LiftMaster Cludge Arm Clamp and Handle K75-50121

  • Compatible with various LiftMaster® Swing Gate Perimeter Access Systems
GALV-283-2-L

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
K41-0380-000

LiftMaster Bridge Rectifier 700/1200

  • For Maxum ops
K41-0378-000

LiftMaster 24VDC Motor Gear Box Encoder (Trolley 1200)

  • Maxum T-1200
K41-0409-000

LiftMaster 1200 Extended Duty Motor Gear Box Encoder Trolley

  • For Maxum Trolley 1200 Op
K41-0375-000

LiftMaster 24VDC Motor Gear Box Encoder (Jackshaft 1200)

  • Maxum J-1200
MI00034

Micanan Pulley 9" OD c/w Bushing 3/4" ID

GX-200-MG

Garex Ready to Install Door Multi-Grooved Special Order

  • 21" panel = 4 grooves 24" panel= 5 grooves
  • COMPLETE JOINT SEAL No air circulation between the panel sections eliminating thermal bridges.
  • Minimize the heat transfer between the inside and outside of your garage.
  • LIGHTWEIGHT AND ROBUST PANEL Polyurethane foam insulation pressure injected between the interior/exterior faces
  • WOOD END BLOCKS Suitable to receive steel end caps
  • HIGH-PERFORMANCE DESIGN Flexible rubber inserted into a PVC reinforced moulding offering a tightly sealed fit to the floor
    • .......more details
CHAINTENS125DC

LiftMaster Chain Tensioner 1-1/4" MAXUM DC

  • For use with various LiftMaster® MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators; manufactured after 2023 only.
  • Chain Spreader for Maxum for 1" door shaft
OSH-6534-M-N1-LH

Manaras Opera-SH 1 HP 600V 3 Ph Monitored Board w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
OSH-6532-M-N1-LH

Manaras Opera-SH 1/2HP 600V 3Ph Monitored w/ N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
A22K

Erone Krypto 2-Door IP Controller

  • The ATRIUM A22K two door IP controller works perfectly with the most popular Wiegand card readers or with the embedded KRYPTO high-security solution providing the best of both worlds in access control.
  • KRYPTO is the easiest solution to manage DESFire® EV2/EV3 smart credentials on the market making worries of card cloning a thing of the past.
  • The auto restore of encryption keys upon power failure ensures an effortless system start up and management.
  • Additionally the A22K can easily be converted to an Elevator Controller (A22KEC) Schlage Door Handle Controller (ADH2K) or Aperio Door Handle Controller (A2PK) as needed.
  • Controls 2 doors / 4 readers (entry/exit per reader port)
  • Add more A22Ks to expand your system up to 500 doors
    • .......more details
Wireless System Chart
8086.207.320

Whiting .207 x 2-5/8 IN x 32" Roadside with Cones

  • An original Whiting assembly
GALV-406-6-R

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Galvanized Blue/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized
GALV-406-6-L

Cut-to-Length Torsion Spring .406 x 6" Left Hand Wound Galvanized Blue/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized
GALV-406-6-144-R

Torsion Spring .406 x 6" x 12ft RH Galvanized Blue/Yellow

  • Wire size: .406
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
2807.206.380

Whiting .206 x 2-3/16 x 38" Curbside with Cones

CGH303L5-RH

LiftMaster Gearhead w/Carwash Mod. & Brake 3 HP 208/230/460V 3P L5 Right Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
K41-0254-000

LiftMaster Electric Motor IHSL24UL

  • Compatible with LiftMaster® Model IHSL24UL Industrial-Heavy Commercial Slide Gate Operators.
  • Compatible with the following models: IHSL24UL IHSL24ULMC
DWI-LOCK

Doorway Impact Monitored Slide Slock V2

  • Monitored Slide Lock for the DoorWay Impact Sensor (Impact sensor and air switch not included)
  • Connects to an Air/Impact switch to mechanically and electrically lock the door.
SETR2641AM2KP

Erone 2-Channel Mini Transmitter with Paradox Tag Black 433MHz

  • With built-in Paradox tag
  • Heavy-duty construction
  • Elegant & easy to carry
  • Unobstructed range: 656 ft (200m)
  • 60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
  • Two lithium batteries (CR2016) included
    • .......more details
Wireless System Chart
K07-3611

LiftMaster Disconnect Bushing

  • Compatible with LiftMaster® SL590 Slide Gate Operators
GALV-393-6-144-L

Torsion Spring .393 x 6" x 12ft LH Galvanized Orange

  • Wire size: .393
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
E/0172/166

Automatic Systems Spring Assembly

5001-10-BRONZE

Residential Side & Top Weather-Strip 10' Long - Bronze (FF)

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
  • Sold by full case quantity (20)
20W33A

LiftMaster Solar Kit 33-AH 12V ***Kit includes: 1x SP20W12V 1x A12330SGLPK & 1x K94-37236***

  • Kit includes: SP20W12V (1) SOLAR-PANEL KIT12V20W A12330SGLPK (1) BATTERY 12V33AHSINGLE K94-37236 (1) UNIVERSAL SOLAR HARNESS KIT-7AH & 33AH
  • Compatible with: RSL12ULMC gate opener
OTBH-6534-M-N1

Manaras Trolley Operator 1 HP 600V 3 Ph Monitored w/N1 Photoeyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
K72-12532

LiftMaster Output Shaft Kit J

  • Also known as: 308116010J 310-116010J 308116010JK 310116010J
  • Compatible with LiftMaster® Model J Commercial Door Operators
LPEXP

LiftMaster CAPXL Loop Detector Input Board

  • Automatically trigger a phone call to a guard or office when a guest arrives
  • Mounts inside of CAPXL
  • Works with CAPXL and LOOPDETLM Plug In Loop Detector (Each sold separately.)
  • Operating Temperature -20°F to 130°F (-29°C to 54°C)
  • Dimensions: 2.8” x 2.3”
15-50B32QGH

Sprocket 50B32 1.25 Bore 1/4" w/SS

  • 71-1550B32QGH is a 32 Tooth Sprocket Kit 1-1/4" Bore x 1/4" keyway (50B32-114)
  • For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators
CAPXSTKPL

LiftMaster Trim Kit with Postal Lock for CAPXS

  • Trim plate with integrated postal lock cover exclusively for installing with Model CAPXS – Smart Video Intercom S
  • Pre-Wiring included for postal lock device (not included).
  • Provides a clean aesthetic installation when the application calls for a postal lock while also helping hide remnants of a previous installation
  • Dimensions: 14” x 6.5” x 1.4”
CAPXSTK

LiftMaster Trim Kit for CAPXS

  • Trim plate exclusively for installing with Model CAPXS – Smart Video Intercom S
  • Provides a clean aesthetic installation helping hide remnants of a previous installation.
E14500D

Cable Tie KSPEC STD 50 LB Black 14" Nylon 500/pkg

  • Length: 15" Width: 5.0MM (0.187")
  • Low insertion and pull through force
  • Advanced pawl and teeth design
  • Angled tail provides quicker initial insertion alignment
  • Tail finger grips allow easier handling and tightening
  • Rounded edges provide added safety and eliminate insulation damage
    • .......more details
2200-983-UPS

Linear Brake and Puck Assembly UPS HSLG

MD00093

Micanan #410 Roller Chain 45 Pitch c/w Connecting Link

OSH-6434-M-N1-RH

Manaras Opera-SH 1 HP 480V 3 Ph Monitored Board w/N1 Eyes RH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
PRO-GH-10023U-R

Micanan 1 HP 230V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
31111-114

Doorlec Sprocket 50B70 1-14" Bore KW/SS

837LM

LiftMaster MyQ Smart LED Garage Light Sec+ 2.0

  • 1000 Lumens of LED illumination provide a bright maintenance-free glow.
  • Unique compact design allows for placement where you need it.
  • Easy to Install. Conveniently plugs into a standard outlet and mounts on the wall or ceiling.
  • Control and schedule your LED light from anywhere with the myQ app. Requires a LiftMaster® or Chamberlain® garage door opener with myQ technology Smart Garage® Control or myQ Internet Gateway.
  • Acts as a garage door opener light (works with Alert-to-Close and Motion Control) when paired to your garage door opener.
  • Turn lights on and off with the myQ App or your garage remote.
    • .......more details
837LM Manual (EN/FR)
HD3117

Heavy Duty Slide Lock 2.85" Throw Zinc Plated

  • Mounting holes: 0.275"
XF600VAC7

LiftMaster 600V Transformer Kit 700

  • For use with various LiftMaster® MAXUM Series DC 700 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators
ME00048

Micanan Keyway 1/4 SQ x 3/4" Long

RSH-6814-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes LH

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details