Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Open
111421.0003

Overhead Limit Module RSX

.177_2"-LH

Torsion Spring .177 x 2" x 12ft LH Gold

  • Wire size: .177
  • Inside diameter: 2"
  • Length: 12 ft
MA020

LiftMaster Mega Arm Replacement Cover

  • MA-020 is a Mega Arm Replacement Cover.
  • Compatible with LiftMaster® Mega Series (MA/MAS) Commercial Gate Operators ONLY
AUXCON011

Auxiliary Contact Allen Bradley 1 NO/1 NC Size 0-5

  • Allen Bradley #595-AB
30002

Doorlec Brake Solenoid 230V with wire leads

  • orks with all 230V Doorlec Commercial and Gate operators
26CW945255

Truck Door Intermediate Panel (15.5" x 98") Painted White for Whiting Dryfreight

  • These panels are 15.50" height x 98" width.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
8030279

Marantec Replacement Belt with Tab for 8ft Door

  • Overall Belt Length = 250"
  • Travel limit tab attached to belt
  • For Marantec opener models: M4500 M4700 Q7500 Q7700 Q7900 M4500e M4700e M4900e Synergy 260 Synergy 270 Synergy 280 Synergy 360 Synergy 370 Synergy 380 Synergy Solo
  • Check the Belt Connector while you are replacing the belt. If it's worn or cracked it should also be replaced
EHJ-353-3/4

Doorlec Industrial Jackshaft Op. ECB 3/4 HP 575V-3Ph

  • Equipped with: 3-btn control Adjustable Automatic Friction Clutch Emergency Chain Hoist and Heavy-Duty Solenoid Brake.
  • With DC-2000 controller
OSH-6812-ECB-LH

Manaras Opera-SH 1/2 HP 208V 1Ph with Electronic Circuit Board Left hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Q027

LiftMaster Motor Capacitor 240VAC 65 MFD K29C-65AU2415

  • Replacement Motor Capacitor (65uF 240VAC 50/60Hz).
  • Compatible with LiftMaster® CSW200U & SL3000U Models (post 2016) and various Commercial Swing and Slide Gate Operators; manufactured before 2016
  • Dimensions: 2" diameter x 4-1/4" long.
RDO-321-3/4

Doorlec RDO Rolling Curtain Op. w/ECB 3/4HP 230V 1PH

  • Additional charge for doors over 14' high
0220-1K-390

Heddolf 1-btn Overhead Compatible Remote 9 Dip Switch 390 MHz

  • Overhead compatible full-size transmitter
10.1003.11

Whiting Step Bolt 1/4"-20x 1-1/2"

  • Used with keps nut #796 - sold separately
  • Ideal for installing hinges on dry freight doors
41A2818

LiftMaster Limit Switch Drive Gear Kit

  • For use with various LiftMaster® and Chamberlain® Residential Garage Door Openers.
  • Complete replacement kit includes: helical gear e-clip and grease tube
PRO-R4918

Linear Magnetic Rev Counter PCB Assbly 3KXLS 4KXLS R4918

  • Linear Professional series
K77-36389

LiftMaster Hardware Kit LA500

GTO-R5211

Nortek Retrofit Replacement Control Board Green

  • Replaces the R4211 replacement control board
  • Retrofit board with upgraded firmware that is compliant with UL 325 Version 6
  • Color is green
  • Compatible with the Mighty Mule FM500 & FM502
  • Compatible with GTO PRO 2000XL GTO PRO 3000XL GTO PRO 4000XL
  • Compatible with the old GTO PRO 2000 GTO PRO 2500 GTO PRO 3000 GTO PRO 4000 Swing Gate Operators
    • .......more details
K41-39254

LiftMaster Reflector and Bracket Kit

  • Commonly used to replace a lost or damaged reflector for LiftMaster® Monitored Photoelectric Sensors (LMRRUL).
  • Complete kit includes: (1) Bracket (1) Reflector (1) Reflector Cover and Assembly Hardware
  • Compatible with LiftMaster® LMRRUL Monitored Retro-Reflective Photoelectric Sensors
  • Reflector Dimensions with Hood: 2.6" x 4.72" x 2.0" (W x H x D)
  • Reflector MUST be mounted vertically; no horizontal mounting
XBA8

NICE Apollo Red/Green Internal Traffic Light Module

  • This module makes your barrier shine red and green signaling oncoming traffic when it is safe to pass through the barrier. Designed for M-Bar and L-Bar barrier gate operators.
41D8257

LiftMaster Cover Only for 8550W

  • One piece cover is compatible with LiftMaster Model 8550W Elite Series
26665

Doorlec Drive Shaft 1" x 19" Stress-Proof SGP

41D0233-3

LiftMaster End Panel WiFi Logic Board

CP-PW-NM-34

Lynx Pocket Wheel for HDC

M5BAR-R10V1-PKG

NICE Barrier Gate Op. w/Heater 5M (16') Arm Package 110VAC

  • Electromechanical road barrier system for control of road access.
  • 24 Vdc gearmotor
  • Robust structure in steel new high strength balancing springs guaranteed up to 1000000 opening and closing operations and elliptical section bar with high wind-gust resistance.
  • Work cycle (cycles/hour): 350
  • Working temp. (°C Min/Max): -20 ÷ +50
  • Packing includes: Heater Aluminum Arm Rubber impact protection strip and sticker kit
    • .......more details
IBT4

NICE Interface Module

  • Required for use of Oview on the new Gen 2 MBAR models
  • Same as IBT-4N
GODEFROY-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Overlay moldings positioned to create the Godefroy design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
MITIS-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Overlay moldings positioned to create the Mitis design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
COMP-VILLERAY-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Overlay moldings positioned to create the Compact Villeray design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
UNI-VILLERAY-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Overlay moldings positioned to create the Uniform Villeray design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
EXT-VILLERAY-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Overlay moldings positioned to create the Extended Villeray design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
MONTARVILLE-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Overlay moldings positioned to create the Montarville design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
PORT-ROYAL-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Overlay moldings positioned to create the Port Royal design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
VERMONT-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Short Panel with vertical lines carriage style - Panel spacing does not allow for decorative handles - Decorative hinges can be used - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
GX-175-A-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - 2 wide shadow lines at the top and bottom of each panel - Available in Aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
GX-138-S-R12

Garex Ready to Install Door Special Order

  • R12 Insulation - Woodgrain with 2 wide shadow lines at the top and bottom of each panel - Common commercial profile - Available in steel white and black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements
URBAN-MR-R12

Garex Ready to Install Door Special Order

  • R12 Insulation - Narrow multi rib pattern - Available in steel white and black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements
WOODGRAIN-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Woodgrain Only - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
QUANTUM-R16

Garex Ready to Install Door Special Order

  • R16 Smooth Finish - Available in 20 GA steel white only - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
WOODGRAIN-R12

Garex Ready to Install Door Special Order

  • R12 Insulation - Woodgrain Only - Available in steel white or black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements
PREMIUM-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Short Panel - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
A123300SGLPK

LiftMaster Battery w/ Harness Single 33AH 12V

39153R.S

Genie Optical Encoder AC Screw Drive Models

  • Compatible with models; 2562 2564 2568 PowerLift® GPower 900
  • Also called the RPM sensor it is used to resolve the issue of short travel problems or drifting limits on the garage door opener.
  • Single & Dual encoder
26-40019

Truck Door Bottom L-Retainer 90" Long for Todco Roll-Up Doors

  • Galvanized steel construction for extra strength and corrosion resistance.
  • Fits both standard and heavy-duty bottom seals.
  • Pre-punched holes for added convenience
  • Cross Reference: T #61191 W #4034 260000
10.1054.1

Truck Door Pop Rivet 1/4" ColdSaver/TempGuard Doors

  • Mild steel construction
  • Used in Cold Saver and Temp Guard doors
CA-151-412

Continuous Angle 1-1/2" x 4-1/2" x 151.5" L Sold per Piece

  • 12-ga angle
192417

Torque Force Pocket Guide 3.5" x 5" 195307

  • Imperial multiplier
  • Features: Drum specs Plugs specs Manual counterbalancing calculation Spring charts
PUSH148

Manaras Contact Block NO

  • Same as ZEN-L 1111
N4GH503L5-RH

LiftMaster Gearhead wi/Watertight/Oiltight Mod. and Brake 1/2 HP 230/460V 3-Phase Logic 5

  • N4 (M103) modification installed on operator Watertight Oiltight Dust-tight with Nickel-plated chain and Dynamic brake.
  • Comes with CPS-UN4 photo eyes
K107A0031

LiftMaster Replacement Keys (2) for KPW5 KPW250

  • Replacement keys only
CP-SH-34-MC3

Lynx Complete Limit Shaft Assembly #41 Chain

  • For trolley operator
106141

Marantec Shaft Adapter

MX00218

Micanan Clutch Shaft Assembly for PRO-LH

E/BLOP/149

Automatic Systems Safety Edge for BL229 13'

DMB51CM24

Carlo Gavazzi Mini Multifunction Timer

  • Mini DIN Rail Mount Multi-Function Timer
  • 24VDC and 24-240VAC/DC Supply Voltage
  • 0.1 Seconds to 100 Hours Timing Ranges with Six Sub-Ranges
  • Diagnostic LEDs
  • Only 17.5mm wide
41ASWG-489

LiftMaster Cable Repl. Kit 24V 3m with Connector

  • For use with LiftMaster® Model LA400 Series Commercial Swing Gate Operators
.289_3-3/4"-RH

Torsion Spring .289 x 3-3/4" x 12ft RH

  • Wire size: .289
  • Inside diameter: 3-3/4"
  • Length: 12 ft
M-0133

Autogate Proximity Magnets

20650

Coax Cable Extension Adapter

  • Adapter with “F” socket
  • Connects two coax cables to extend length
HSC-BOLT-3002

Replacement Center Bolt for HSC-600 Swager Sold Individually

  • Replacement bolt only (1)
PRO-HHD-7525U-R

Micanan 3/4HP 220V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 3/4 HP208V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation Manual (EN)Specification Sheet
CHW401-114-TFRCE

Chain Hoist Wall Mount 4:1 1-1/4" 2000R Torque Force (126658)

  • 4:1 Reduced drive
  • Sprocket: 41B36x114 Bore: 1-1/4"
  • Includes: 26ft of hand chain 1/4" square key chain keeper and 3.6ft of #41 roller chain included with sprocket wheels.
  • Cross Reference: 2000R OMI 4006
DrawingSell sheet
41D0216-2

LiftMaster End Panel with Light Socket

  • Compatible with LiftMaster® 8550WL & 8360WL Models; and various garage door openers manufactured after 2017 only
  • Circuit board not included
CANIMEX-H/CHAIN

Canimex Hand Chain 30.7 Zinc Plated Sold by Barrel Only 1000ft 126581

  • Unwelded Steel
  • For use with all Torque Force chain hoists
  • 30.7-19-5 sold in 1000' barrel
PMT20I

Carlo Gavazzi Through Beam Emitter Side Only

  • PMT series features include immune to ambient light precise detection through narrow beam LED-indication and output function switch selectable.
Installation Manual
CP-SH-58-812

Lynx Complete Output Shaft Assy for TC3

  • Complete assembly with bearings
  • Used to be 8-1/2" long it is now 10-1/2" long will work the same.
LM56A

LiftMaster Magnetic Proximity Reed Switch

  • Normally Open magnetic sealed reed switch; proximity switch
  • Used for overhead door contacts.
41D4509

LiftMaster Motor Kit ATS211

  • Also known as: K75-16424 41D4509 123D0155 123D155
MGR20-Y-2U-PER-FT

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet Sold Per Foot

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
  • Non-monitored edge
  • Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)
111503.0002.S

Overhead Gear Reducer 40:1 RHX

902-T-7X9-VL

Hardware Set 3" Industrial 902-T for 7' x 9' VL

  • A variety of options and sizes are available call for quote
  • Set includes tracks HD rollers hinges solid shaft drums cables springs and struts if applicable.
MA034RDOT

LiftMaster Articulating Square PVC Arm Kit Red/White with Retro-Reflective DOT Tape 9 ft

  • For use on Mega-Arm gate operator
  • Red White reflective DOT stripe
  • 9 ft. x 2.5 in. square includes hardware kit (MA033)
Additional arm accessories
K23-34815-1

LiftMaster Stop / Reset Switch Black Face

  • For use with SL595UL Series heavy-duty industrial slide gate ops
.234-3.5-11.25-LHW

Mini Storage Spring .234 x 3.5" x 11.25" long Looped Ends Left Hand

CP-IDLER-ASY-MCBH

Lynx Front Idler Assembly Commercial MCBH

K77-37856

LiftMaster Front Cover Grey RSW12U CSL/CSW24U

  • Front cover only
  • HEIGHT: 18-1/4 Inches
  • WIDTH: 15 Inches
  • DEPTH: 13 Inches
LMPK2-SN

LiftMaster HID ProxKey III 1346 - Sentex Price Per Card ***NLA

  • Universal compatibility with HID proximity card readers
  • Provides an external number for easy identification and control
  • Pocket size key fob
  • HID Sentex 30 Bit Format
  • 125 kHz
  • Sold in Lots of 100
    • .......more details
4004-10FT

Aluminum Retainer only for Heavy Brush 10' Long 45 degree ** To extent of inventory

  • For angle application (45 degree)
  • For use with Heavy Brush
Q200

LiftMaster Chain Coupling Release K07-50215

  • For Liftmaster trolley operator HCT
10.1003.150

Whiting Step Bolt Stainless Steel 1-3/8"

050DCDDOWF

LiftMaster Receiver Logic Board WiFi Dock Door Jackshaft

  • 050DCDDOWF is a Receiver Logic Board Replacement Kit.
  • Compatible with LiftMaster® Model DDO8900W DC Light-Duty Commercial Jackshaft Operators; featuring WiFi®
MV00210

Micanan Banner Reflector 3"

  • Compatible with Banner #MV-00300 reflective photocell
ME00018

Micanan Keyway 3/16 SQ x 1-1/4" Long

MQ00008

Micanan Set Screw 5/16"-18 x 5/16" Long

MM00026

Micanan Cut-Out Sw. Activation Plate Gearhead (MSI0042)

7001-10-ANODIZED

Commercial Side & Top Weather-Strip 10' Long - Anodized 7001-AB

  • Anodized galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-12-ANODIZED

Commercial Side & Top Weather-Strip 12' Long - Anodized 7001-AB

  • Anodized galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-9-ANODIZED

Commercial Side & Top Weather-Strip 9' Long - Anodized 7001-AB

  • Anodized galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
PRO-GH-15011U-RH

Micanan 1.5 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
LJH-353-3/4

Doorlec 3/4HP 575V 3PH Jackshaft Operator

Technical information
K1D8424-1CC

LiftMaster Power Board 3 Ph SL585U/SL595U

  • For use with LiftMaster® SL585U & SL595U Series; and various 3 Phase Commercial Slide Gate Operator Models.
CP100C

Coupler Specialty Coated 1" Bore

  • Coated with 1000 plus hr salt spray rated finish
  • 1" Bore with 1/4" keyway
  • Malleable iron for high strength and resistance to shock loading
  • Coupler halves separates and is adjustable
  • 4-(3/8"-16 x 1" square head set screws installed
  • Rust inhibitor coating
    • .......more details
2523

Whiting Balancer Bracket End - Curbside for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Cross Reference: W # 2523 for # 2376 balancer
BPPB17524

Garex Bottom PVC Moulding White for 1 3/4" Door U shaped 289"(24')

SHAFT120

Manaras Input Shaft for OSHW

.192-134-R

Cut-to-Length Torsion Spring .192 x 1-3/4" Right Hand Wound Silver

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
100144

Linear Brake Shoe w/Lining

  • For commercial door operator
16-4L280

LiftMaster Vbelt 4L 28" **to extent of inventory

  • Compatible with LiftMaster® Model SW490GL Swing Gate Operators
GHX-6432-CONT-LH

Manaras Explosion Proof Gear Head 1/2HP 480V-3P Contactor Left Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station
AM-DPR

Linear Dual Proximity Reader

  • Compatible with most Wiegand formats up to 40 bits
  • Weather resistant and vandal resistant
  • 4 to 6 inch read range
  • Supports up to 65000 cards
  • Easy to install
  • Integral LED confirms when user access is granted
    • .......more details
RBH105L5-LH

LiftMaster 1 HP 575 VAC 3 PH Comm. Hoist Op. Logic 5 Left Hand

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details