Devanco Canada - Get The Right Garage Door Opener‎ and Parts

87-P-075

LiftMaster Turac 3/4" Push on Fastener

T751L5

LiftMaster 3/4 HP 115/230V 1P Commercial Trolley Operator Logic 5 *** No Longer Available

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

CLUTCHPAD007

Manaras Clutch Pad 1-3/4" ID 5" OD

MODKIT065B

Manaras Trolley Hoist #41 Brake Release Kit Includes 12' Shaft

Modification kit for in-field upgrades

21002

Doorlec Hoist Interlock Switch

SLEDB-110V-AMB

Strobe Light Amber 110V Permanent Mount *** No Longer Available

88 flashes per minute

Z9210

Spring Spreader Tool

Used to spread the spring coils while repairing a broken spring

Z9220

Pocket Style Res / Com Combo Spring Gauge

Includes wire sizes .1875 thru .5
Double saw-tooth leaves for easy wire measuring
Stainless steel
Includes belt sheath

TCG-2

LiftMaster Tri-Code Commercial Receiver ** DISCONTINUED

Two channel commercial receiver compatible with Linear Delta Multi-Code and Stanley radios.
Six 3' wired leads

Installation Manual

27175B

Genie Carriage Slide Only

Carriage NOT included. Carriage part number 20462R
Compatible with Genie GPS and PMX belt drive models

20462R

Genie Carriage Release Assembly Belt Drive *** No Longer Available

Carriage slide sold seperately- part number 27175B
This carriage is used for Genie and Overhead chain and belt channel rails

AK-21

Linear Interior Digital Keypad ***to extent of inventory

The keypad is housed in a rugged plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright easy-to-read yellow graphics.
It is supplied with four different plastic snap-on mounting bezels to customize the look of the keypad. The satin-chrome bezel comes factory installed on the keypad. The white ivory & bronze bezels are packaged separately.
Up to 480 entry codes from 1 to 6 digits in length can be programmed. They can activate either or both of the relay outputs.
Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for timed or latch-on/latch-off toggle operation per each individual entry code.
The on or off toggle state of a relay is maintained even after power interruption. When power is restored to the keypad each relay will assume the state it was in when power was removed.

Installation Manual

9150000629

3/16" Stops ONLY 100/pkg

Stops only 100 per pack

34516R

Genie Chain Glide Inner Slide ML Series with Magnet

For ML Series with Magnet: 350ML 500ML 700ML 800ML

19792B

Genie Replacement Door Bracket Zinc

Universal door bracket to connect door to door arm
Same as 19792A04

7001-8-W/B

Commercial Side & Top Weather-Strip 8' Long - White and Black (WB)

White galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

804

Fasteners Sleeve Anchor 3/8" x 4" 50/Box

Secure anchoring into concrete brick or block

MX00140-110-OLD

Micanan Brake Assembly for PRO-TB/APTB with 110V Solenoid Inside - Old Model

19-5114

LiftMaster Trolley Chain Pack #41 for 14ft Door

For 3/4 & 1 HP trolley operators

735

Fasteners Flat Washer 3/8" USS Zinc 1000/Box

ID: 0.40625’’
OD: 0.8125’’
THK: 0.066’’

19-41047

LiftMaster Roller Chain #41 47 Pitch w/Link

For model T operators
Approx. 2-3 ft

97798

Marantec 2 Piece Logic Board with Terminal Strip for EOS Models

For use on Easy Operating System (EOS) units 4500E 4700E and M50.
Includes the terminal strip for direct replacement of boards that had a power surge or burned out.
The marantec old model number was 78914 it is now 97798.

Programming Instructions

H8064HCLL

Polycarbonate Hinged Enclosure Clear Cover Locking Latch

Dimensions: 8 x 6 x 4
Stainless Steel locking latch
Nema 4X

MA031

LiftMaster Adapter Collars 2/Pkg

For use with Mega-Arm padded arm

MA022

LiftMaster Arm Bolt

For use on Mega-Arm gate operator
Sold individually
5/16-18 x 29" hex head

MH00007

Micanan Shaft Collar 1" I.D

MD00327

Micanan Sprocket 50B15 x 1" 1/4" KW 2SS

831T

Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz 107483 *** To extent of inventory

Open/Close/Stop stationary remote for 1 door.
Designed for commercial automatic door and gate operator applications.
This transmitter can operate a single receiver connected to one operator
Compatible with 3-channel Allstar and MVP receivers
Easy access to battery and coding switch
Power: 9-volt battery

.......more details

Programming Instructions

860LM

LiftMaster Universal Weather Resistant Receiver

Weather-resistant for outdoor mounting requirements
Provides convenient access to gated communities industrial facilities and commercial sites all with a single transmitter solution
Three channels provide expanded remote control capacity: Channel 1 - 50 remotes Channel 2 - 20 remotes Channel 3 - 20 remotes
Multiple remote control options available to provide secure access from the safety and convenience of a vehicle
Compact design fits most gate and commercial door operators
Compatible with 811LM 813LM and all MAX remote controls

.......more details

Programming Instructions Instructions de programmation Sell Sheet

.343-5-1/4-SQ-R

Cut-to-Length Square Wire Torsion Spring 31" long with Cones Right Hand

.343-6-L

Cut-to-Length Torsion Spring .343 x 6" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

.343-6-R

Cut-to-Length Torsion Spring .343 x 6" Right Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

7001-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black (Code B)

Black galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black (B)

Black galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-7-BLACK

Commercial Side & Top Weather-Strip 7' Long - Black 7001-BB (Code B)

Black galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

767

Fasteners Lag Screw Hex Washer Regular Profile 1/4" x 1" 1000/Box ***NLA

7/16" head

790

Fasteners Hex Nut 3/8-16 1000/Box

794

Fasteners Keps Nut 5/16-18 1000/Box

Lockwasher & nut combination

786

Fasteners Hex Nut 1/4-20 1000/Box

765

Fasteners Serrated Flange Nut 3/8-16 1000/Box

Serrated flange face to provide locking

23-2016

LiftMaster Limit Switch

Limit Switch for the VSL595

8X118

Fasteners Wood Screws 1000/Box

Ideal for residential weatherstrip

775

Fasteners Hex Head Bolt 1/4-20 x 3/4" 1000/Box

1/4" bolt has 7/16" head
Max torque = 6
Full thread

5X10SC50

Devanco Loop 5' x 10' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

99553NYHNG

Nylon Hinge Black #3 *** To extent of inventory

Equivalent to 14-ga in strenght

99551NYHNG

Nylon Hinge Black #1 *** To extent of inventory

Equivalent to 14-ga in strength

MV-00025-OLD

Micanan 32-Door O/C/S Transmitter CT-32 313 MHz OLD STYLE Deep Buttons *** No Longer Available repl by new style

Commercial / Industrial transmitter

29-31229

LiftMaster Relay 24VDC 30A SPDT 1-Phase only

C-relay for model T operators 10A

114

Lag Screw Hex Washer Head 1/4" x 1-1/4" 1000/Box

7/16" head
Serrated

SSZP15-1

Solid Shaft 1" Keyed Zinc Plated 15'-1" ** to extent of inventory

SSZP11-6

Solid Shaft 1" Keyed Zinc Plated 11'-6"

SSZP11-1

Solid Shaft 1" Keyed Zinc Plated 11'-1" ** to extent of inventory

SSZP7-6

Solid Shaft 1" Keyed Zinc Plated 7'-6"

MT22-YELLOW-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

K001D8073-1

LiftMaster Three Phase Relay/Power Board 230/460V (K001D8397)

For Logic 5 commercial operators
014D1279E
New part number K001D8397

CH755L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 575 VAC 3 Ph Logic 5 Right Hand ***Replaced by CRBH755L5-RH

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

CH755L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 575 VAC 3 Ph Logic 5 Left Hand ***Replaced by CRBH755L5-RH

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

CH501L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 115/230 VAC Logic 5 Left Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

H755L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 575 VAC 3 Ph Logic 5 Left Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

H505L5-RH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 575 VAC 3 Ph Logic 5 Right Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

K72-14130-1

LiftMaster Limit Shaft Kit H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators

For models H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators
Kit includes: Limit shaft Limit nuts Limit bearings Limit sprocket Interrupter cup Shim washers Compression ring Roll pin and E-rings.

MOUNTSHAFT007

Manaras Clutch Shaft Kit for MTBH with 5/8" Shaft

For operators made with a 5/8" shaft
For very old model MTBH built with 1" shaft - use part number MOUNTSHAFT017

Drawing

41D217

Fits model 8550

41A3150

LiftMaster Terminal Block with Screws

For model 8355
Same as 041A3150

41C168

LiftMaster Transformer

For model 8500
120V / 150 VA
24VDC output voltage
Also known as 41C0168 041C0168

7001-16-CREAM

Commercial Side & Top Weather-Strip 16' Long - Cream (C)

Cream galvanized steel with cream dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Almond
Full case quantity only (10)

7001-14-CREAM

Commercial Side & Top Weather-Strip 14' Long - Cream (C)

Cream galvanized steel with cream dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Almond
Full case quantity only (10)

7001-12-CREAM

Commercial Side & Top Weather-Strip 12' Long - Cream (C)

Cream galvanized steel with cream dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Almond
Full case quantity only (10)

7001-10-CREAM

Commercial Side & Top Weather-Strip 10' Long - Cream (C)

Cream galvanized steel with cream dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Almond
Full case quantity only (20)

7001-8-CREAM

Commercial Side & Top Weather-Strip 8' Long - Cream (C)

Cream galvanized steel with cream dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Almond
Full case quantity only (20)

7001-14-SANDSTN

Commercial Side & Top Weather-Strip 14' Long - Sandstone (D)

Sandstone galvanized steel with sandstone dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Taupe
Full case quantity only (10)

7001-10-SANDSTN

Commercial Side & Top Weather-Strip 10' Long - Sandstone (D)

Sandstone galvanized steel with sandstone dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Taupe
Full case quantity only (20)

7001-9-SANDSTNE

Commercial Side & Top Weather-Strip 9' Long - Sandstone (D)

Sandstone galvanized steel with sandstone dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Taupe
Full case quantity only (20)

MB-01001

Micanan Electric Motor Only 1/2HP 110/220V 1PH

Base Mount motor O.D.P. FR56
Used on Micanan's T TB APT J EJ H EHJ HHD & SD

MOTOR254-WIRED

Manaras Electric Motor 1/2HP 120/240V 1PH Wired

Continuous-duty base mount 60Hz
This item is compatible with BRAKE011

T014

Manaras Trolley Track 14ft for 1/2HP models up-charge *Actual length 198"*

For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)

348.000

Whiting Tongue & Groove Bottom Panel Assembly with #77 Lock Made to Order. **Quote Only

15-1/2" x 96" standard size panel.
Extra wide panels will carry an additional charge
Primer only

3X6PO50

Devanco Loop 3' x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

MK500GS

LiftMaster MiniKey Stand-Alone Keypad System ** No Longer Available

Self-Contained Keypad System for Door and Gated Entrances
500 Code capacity
Grained stainless steel Surface Mount
Dimension: 4-1/2" H x 4-1/2" W x 3-1/2" D
Same as SN7000255
Sentex Keypad

.......more details

Installation Instructions Programming Instructions Sell sheet

915007048X

Extension Cable 1/8" 7x19 14' Sold as a Pair

Cable assembly for extension spring door - looped on one end the other is raw (no stops)

1104-9FT-CHARCL

Residential Side & Top PVC Weather-Strip with cap 9' Long - Charcoal (H)

Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-8FT-CHARCL

Residential Side & Top PVC Weather-Strip with cap 8' Long - Charcoal (H)

Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-7FT-CHARCL

Residential Side & Top PVC Weather-Strip with cap 7' Long - Charcoal (H)

Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

HOMELINK-REPTR

LiftMaster HomeLink Repeater Kit ** same as 855LM

All 2006 or older vehicles require a repeater kit installation
In 2007 and newer if the HomeLink does not program with opener install a repeater
The remote supplied in the repeater kit must be kept for future programming and is NOT to be used as a garage door opener remote

Programming Instructions

1104-14FT-GREY

Residential Side & Top PVC Weather-Strip with cap 14' Long - Grey (G)

Grey rigid vinyl retainer with grey flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-7FT-GREY

Residential Side & Top PVC Weather-Strip with cap 7' Long - Grey (G)

Grey rigid vinyl retainer with grey flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

K74-34582-1

LiftMaster Plastic E-Box Assembly for LA500CONT

Plastic replacement box only

SPR41B60X1

Sprocket 41B60 for a 1" Shaft

LA500-SLR-PKG

LiftMaster Solar Package for LA500 Gate Operator

Solar package includes: 2 - 33AH batteries 2 - solar panels (SOLPNL20W12V) battery harness (LA500SLRHARN) and the battery tray (K10-36183).
Must be used with the LA500-1PKG-XLM
Solar option NOT compatible with LiftMaster Internet Gateway
Solar option not recommended in certain areas - please call before ordering

Installation manual Manuel d'installation Sell sheet Brochure

BEA-REMOTE

BEA Falcon/LZR Programming Remote

Makes it easy to set up and make adjustments to all key parameters of the Falcon motion detector while at ground level

Programming instructions

466LMC

LiftMaster Wireless Commercial Keypad 390 MHz ** Discontinued

Up to 100 000 individual codes
Mounts to wall or gooseneck post
Incl. 6-volt alkaline battery
Illuminated stainless steel faceplate and keypad
Tamper-resistant case and "low battery" indicator
Requires 412HMC receiver

.......more details

Installation Manual Sell Sheet

71-65WTC

LiftMaster Weatherproof Case (71-65WTBOX)

Optional weatherproof case suited for 412LMC 422LMC and 423LMC
Measurements of the interior: W=5.75" L=7" D=3"
Measurements of the exterior: W=7" L=10" H=3.5"

SG10B-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Black Housing

Red and Green LED traffic light
Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
24 volt DC input voltage only
Long lasting low power consumption
A simple reliable and cost-effective way to reduce accidents around the loading dock.
Available in two colors: safety yellow or black.

.......more details

Installation Instructions Instructions d'installation Wiring Diagram Schéma de connexion

8FT-BELT-LINEAR

Linear 8ft Belt Drive Rail for residential openers (HBT8C)

8ft belt-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
Fully-assembled & pre-tensioned
Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits

8FT-CHAIN-LINEAR

Linear 8ft Chain Rail for residential openers (HCT8C)

8ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
Fully-assembled & pre-tensioned
Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits

CLUTCH-SHAFT-AS

Lynx Complete Clutch Shaft Assembly for HDC Operators 3/4" x 17-1/2"

Fits all HDC operators - waterproof or not.

SEDK2641A4

Erone Wireless Radio Keypad 433 MHz

Wireless RF Digicode® keypad.
Frequency: 433.92 MHz.
For automatic door opening in sequential mode.
6 channels to control 6 different relays or 6 different RF receivers.

Programming Instructions Wireless System Chart

PROMI-500

Erone 1-Door Stand Alone Card Reader / Keypad **DISC

500 users (proximity badges and/or codes)
3 operating modes: - Mode 0: badge and code - Mode 1: badge only - Mode 2: badge or code
Audible & Visual feedback
1 request-to-exit input
Tamper switch
1 form C door relay output (3A/125V)

.......more details

PROMI-500 Wiring Diagram & Instructions