Devanco Canada - Get The Right Garage Door Opener‎ and Parts

SG10B-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Black Housing

Red and Green LED traffic light
Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
24 volt DC input voltage only
Long lasting low power consumption
A simple reliable and cost-effective way to reduce accidents around the loading dock.
Available in two colors: safety yellow or black.
Polypropylene housing will not rust pit dent or corrode like similar metal units.
Provides immediate and recognizable direction to drivers and loading dock staff reducing the risk of confusion and error.
A great stop/start indicator; can be used anywhere a visual communication system is needed

Installation Instructions Instructions d'installation Wiring Diagram Schéma de connexion

24851

Stanley Traveler Carrier Kit

Works with all Stanley chain drive units from 1992-present
Same as part no. 9200014
Trolley slider for part no. 49563

Installation Instructions Instructions d'installation

UCFL-1

Self-Aligning Cast Flange Bearing Football Style 1" Bore UCFL205-16

Grey cast iron painted.
Comes with 2x set-screws
Football style 2 bolt

2598

Aluminum 5/16" Cable Eyelet

For use on Whiting dry freight and refer doors
Use with 1/8" stainless or galvanized cable

510.5377.00

Whiting Side Seal Option for Dry Freight Door

A extra option when ordering a Dry Freight door
When purchased alone use part number 5377.115

510.1000.00

Whiting Premium Topcoat Paint Option White

Option for Dry Freight Doors

78236

Marantec Modular Receiver 315 MHz ***available to extent of inventory see details***

Only available in 315 MHz. Be sure to check which frequency is required
Works with Marantec residential opener models 4500e 4700e 4900e
Replaced by 75424 plug-in receiver

11-3503_ROD

LiftMaster Rod 1/2-13x64 Threaded Take-Up Bolt

Used on slide gate operators using #50 chain.
Also referred to as adjuster bolts

CB18A0500

Cable 1/8" 7x7 500' Galvanized

Galvanized cable 1/8" 7x7 500ft spool.

Comparison charts

STATION081

Manaras Push Button Control Station 1-Button Nema 4/12

1-button 1 N/O contact
Plastic

STAR450-315

LiftMaster Commercial Access Control Receiver 315MHz *** Discontinued

Rapid learn feature programs multiple transmitters in just seconds
Ideal for gated communities parking lotsand garages.
Works on a tri-band frequency

Programming Instructions Sell sheet

SEL2641R433-I

Erone 2-Relay Stand Alone Receiver 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output relay
Power requirements: 12/24Vac/dc
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)

.......more details

Instruction Manual Sell Sheet Brochure Wireless System Chart

50-105

LiftMaster Black Coil Cord 4-Wire 18-ga 20 ft. Extended Curly Cord

02-407

LiftMaster Key Switch Assembly On/Off Nema 4/12

Two-position keyswitch. Key removable in either position.
Surface Mount
May be used on all operators
Die-cast metal enclosure non-tamperproof

PMT20KIT

Carlo Gavazzi PMT20RI & PMT20I Thru Beam Kit

Suitable for exterior applications NEMA 4
Multi-supply voltage 12-240VDC 24-240VAC
LED indication for power supply and target detected
Not recommended for carwash applications
Operating temperature -25 to +55 C
Terminal 5 Common "NO" on Terminal 4 "NC" on Term. 3

.......more details

Installation Manual

7FT-I-BEAM

LiftMaster 7' I-Beam Rail 3707CH Colour Code: Yellow

I-Beam Chain Drive Rail for model 3595

41A5021-1ATS

LiftMaster Circuit Board Assembly (41A5021-1HATS)

Board: Security+ 390 MHz
Assembly includes: circuit board and end panel
Also includes: 1 Multi-Function wall ctrl panel - 2 wire
For: ATS211 & ATS211R
For newer model ATS use replacement board 41A5021-9G-315
Same as 041A5021-1HATS

.......more details

881LMW

LiftMaster Motion-Detecting Control Panel with TTC Sec+ 2.0 Wi-Fi

Push button for garage door operation
Motion-detector automatically turns on the light when movement is detected
150 degree sensing angle for motion sensor
Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
Timer-to-Close feature automatically closes the garage door after a pre-programmed number of minutes - 1 5 or 10
Light run-time is 4 1/2 minutes with adjustable light timer option

.......more details

41A5483C

LiftMaster Circuit Board Assembly *** To extent of Inventory

Assembly includes: Circuit board end panel and light socket
For chain drive units with two lights
Fits 2265 2565 7420 PD610 PV612C & PD612K
Last letter of the part # indicates revision date
Also known as 41A5483 41A5483B

R-831-J

FL-Allstar 1-Door O/C/S Receiver in Oil Tight Case (JIC) 107478-311 MHz **NLA

This receiver is included in a JIC box.
Like the model R-831-P it has three isolated contacts to open close and stop the doors and a possibility of 6 561 operational codes to enhance the security level. If your operator can be controlled by three button station then our R-831-J receiver and commercial remote controls will work with your operator.
Manufacturer's model number: 190-107478
Dimensions: 9 1/4" x 6 7/8" x 1 1/4".

Programming Instructions - Dip Switch Version Programming Instructions - Learn Button Version

FL-KEYPAD

FL-Allstar Wireless Keypad 110927-311 MHz

This wireless keypad controls up to four doors.
Manufacturer's model number: (190-110927)
Dimensions: 6" x 2 3/8" x 1 1/4".

Programming Instructions

41A3489

LiftMaster Complete Trolley Assembly for chain drive

For chain drive models 1984 +
Compatible with Sears Chamberlain

Installation Manual

373LMC

LiftMaster 3-btn Security+ Transmitter 315MHz

Visor clip and 3V lithium button cell (CR2032) battery included.
Same as Chamberlain model 953D

373LMC Manual

CP-BRAKE-ASSBLY

Lynx Brake Shoe Assembly

Brake shoes for all Lynx operators
Assembly includes the shoes
release spring and bolt included

T3B-DS

Lynx 3-btn Transmitter Dip Switch 303 MHz

Ultra secure mid-size transmitter with 8 dip-switches for coding
3-buttons provides control for 3 Lynx operators
Compatible with HomeLink in-vehicle remote control
Can be mounted on visor with saddle clip or carried on a keychain
Visor clip and 12V battery included
Will work with Lynx residential operators built from 2000 and up.

.......more details

Compatibility chart

RADIO-14

Manaras MR-1000 1-Channel 24V Receiver 313 MHz ** Replaced by RADIO-RE900

Controls one operator with MT series transmitters.
Operates on 24VAC.
A LED indicates that the unit has been activated.
Can be installed directly onto the control box of a Manaras operator.

Installation Instructions

ACT-34B

Linear 4-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz

Compatible with all Linear access receivers and controllers
Supplied with quick-disconnect key ring
Power: Two CR2016 batteries incl.
Codes: Factory block coded in MegaCode format
RF frequency: 318 MHz
Dimensions: 1.25" W x 2.25" H x .48" D

.......more details

Programming Instructions

8833TC

Allstar 3-btn 9-Door Transmitter 109023 318 MHz ***Replaced by P-8833TC

Open/Close remote for 9 doors
Compatible Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Slide switch selects door trio to operate
Power: 9-volt battery

.......more details

Programming Instructions

HAE00047

Linear Complete Gear Set with Grease

Set includes: Helical gear worm gears and grease
Helical gear measures 2-7/8" diameter

4006-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1006-1-3/8-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

Black with flexible fin to touch door face.
For door thickness 1-3/8"

1005-1-1/2-16'

Aluminum Bottom Retainer U-Shaped 16' Long

For door thickness 1-1/2"

1104-16FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 16' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

9001-24FT

Commercial Side & Top PVC Weather-Strip Clip-On 24' Long

Grey rigid vinyl retianer with black flexible vinyl.
Reverse angle clip-on vinyl retainer.
Clips onto side of rolling steel door.
Clips overtop of 1/4" angle.

1001-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black

Aluminum retainer with black dual-fin vinyl

25-42-200

Extension Spring 7' Door - 200 lbs Tan

Double - Loop
25" long 42" stretch 200 lb load
Sold individually
Rated for 10000 cycles
Same as part number 120

Spec Sheet

973LMC*

LiftMaster 3-btn Security+ Transmitter 390MHz - DISCONTINUED

390 MHz Secruty+ three button visor tranmsitter
Compatible with Security+ systems including Chamberlain Sears Craftsman and Raynor Openers (Safety Signal) manufactured 1997-2005
Visor clip and battery included (part # CR2032)
Same as 973LM 96LM 953CB 956CB
Discontinued 12/31/13 - Replacement options 375LMC 890MAX 893MAX 892LT 894LT

91-00402

Truck Door Rib Neck Carriage Bolt 1/4"-20 x 1.25" (9/16" head)

Zinc plated finish
Use rib neck carriage bolts with lock and keeper assemblies and hinge installations
Rib neck carriage bolt allows tamper proof installation with a rivet lock and eliminates the nut being installed externally for security.

27-24401

Truck Door Dual Torsion Spring Assembly 93/33 for Whiting Roll-Up Doors

Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
Springs are treated with rust preventative
Roadside cable drum is color coded RED
Specs: Shaft Length: 93" Spring Length: 33" Wire diameter: .182 - Winding cone color: Green

26-14325

Truck Door Bottom Panel with Seal (15" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish
Comes only with bottom retainer and seal (installed)

SF200

Spring Fitting 2" Pair

Unviversal thread for use in either LH or RH wound springs.
Pair includes: (1) winding and (1) stationary.
Maximum wire size diameter: .3065".
Set screw installed: 3/8"-16 x 1" (2).
Mounting: 1" tube or solid shaft
Winding bar hole 1/2"

.......more details

25-10102

Truck Door 2" Steel Roller 3" Shaft for Whiting Roll-Up Doors

Zinc plated shaft 10 roller ball design
Shaft Length: 3" Overall Length: 3.75"
Cross Reference: W #2996 T #70224

SOFT_EDGE-ENDCAP

Devanco Canada Soft Edge End Caps Sold Individually

BRAKEPART019

Manaras Brake Band Assembly (Standard Brake)

Replaces BRAKEPART017 SHOE008
To use on brake drums with edges (DRUM004)
New part number is BRAKEPART019KIT

Installation Manual

10.1003.11

Whiting Step Bolt 1/4"-20x 1-1/2"

Used with keps nut #796 - sold separately
Ideal for installing hinges on dry freight doors

110554

Allstar MVP 1-Door O/C/S Receiver 318 MHz ***Replaced by P-831RE

Three channels - three relay outputs
8-wire operator connection
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683

.......more details

Programming Instructions

Q248

LiftMaster Gear Reducer 40:1 HCT Post 2/99 (K32-50251)

Same as K32-50251

PMT20I

Carlo Gavazzi Through Beam Emitter Side Only

PMT series features include immune to ambient light precise detection through narrow beam LED-indication and output function switch selectable.

LJH-353-1/2

Doorlec 1/2 HP 575V 3PH Jackshaft Operator

Heavy duty industrial type control station open close stop 24V. control circuit
Universal mounting right or left
Floor level disconnect device electrical and mechanical
Emergency chain hoist operation on LJH model only
Colour code wiring diagrams
Rotary type limit switches readily adjustable in both directions

.......more details

LPEXP

LiftMaster CAPXL Loop Detector Input Board

Automatically trigger a phone call to a guard or office when a guest arrives
Mounts inside of CAPXL
Works with CAPXL and LOOPDETLM Plug In Loop Detector (Each sold separately.)
Operating Temperature -20°F to 130°F (-29°C to 54°C)
Dimensions: 2.8” x 2.3”

E14400M

Cable Tie KSPEC 40 LB Black 14" Nylon 1000/pkg

Length: 14" Width: 3.6MM (0.140")
Low insertion and pull through force
Advanced pawl and teeth design
Angled tail provides quicker initial insertion alignment
Tail finger grips allow easier handling and tightening
Rounded edges provide added safety and eliminate insulation damage

.......more details

K005-KEY

Replacement Key for 3BXLT Key #5

Replacement key only for key #K005

MA035RDOT

LiftMaster 9ft Square PVC Barrier Arm Only (Articulating Hardware NOT included)

9' Square Arm
PVC
Red & White Retro-Reflectorized DOT Tape
Hardware NOT included

70598.000

Todco 1" Nylon WondeRoller

Special Order Item
Perfect for dry freight applications this roller has been tested to last 5 - 10x longer than a standard roller.
A fully sealed bearing to keep dust and debris out
2 Inch Track WonderRoller is a nylon-coated-stem track roller for larger application panel truck doors
Polymer vinyl roller head couples with this stem to suit the constant up-and-down and roadway jostling on a freight or other large truck
Roller prevents build up in bearings with a sealed external washer

.......more details

GALV-250-258-144-L

Torsion Spring .250 x 2-5/8" x 12ft LH Galvanized Green

Wire size: .250
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

K41-0156-000

LiftMaster Cable Tension Monitor Left Side

For use with various LiftMaster® MAXUM Series DC 700 lbs. to 2200 lbs. Standard-Duty and Extended-Duty Jackshaft Jackshaft Hoist and Trolley Commercial Door Operators
This service kit is compatible with the following MAXUM models: JDC JHDC and TDC.
NOTE: Refer to K41-0157-000 for Right-Side Cable Tension Monitor

BEA-10EABA

BEA Bracket Accessory for Eagle Artek

FAAC-SPEC-ORDER

FAAC Special Order Gate Product Price by Quote Only

Ordered to customer's specs

RLC-K36

Miller Edge Light Curtain Non- Monitored 3ft NO/NC

Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ideal for pre-2010 installations not requiring a monitored solution.
Ability to span up to 32' wide
Universal mounting brackets included
IP67 waterproof housing

.......more details

OSH-6113-M-N1-LH

Manaras Opera-SH 3/4HP 120V 1Ph Monitored Board w/N1 Eyes LH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

P-831T

Pulsar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz

Open/Close/Stop stationary remote for 1 door.
Designed for commercial automatic door and gate operator applications.
This transmitter can operate a single receiver connected to one operator
Compatible with 3-channel Allstar and MVP receivers
Easy access to battery and coding switch
Power: 9-volt battery

.......more details

Programming instructions

BTM-VB-3.25

Devanco Bottom Vinyl U-Rubber 3.25" Black 250' spool

250ft spool of vinyl insert for sectional doors
low temp vinyl
perforations in the bottom to ensure that condensation escapes
Fits most standard bottom retainers

P-9931R-4F

Pulsar MVP 1-Channel 4-Wire Gate Receiver 318 MHz P-111645

One channel
4-wire operator connection
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683

.......more details

Programming instructions

P-831RE

Pulsar 1-Door O/C/S Receiver 318 MHZ P-110554

Allstar compatible
Economy housing receiver
OPEN-CLOSE-STOP
24V AC/DC
8 dipswitches 318 MHz

Wiring-diagram

K41-0258-000

LiftMaster Idler Bracket Repl. Kit IHSL/ INSL24UL

Idler Bracket Replacement Kit. Compatible with LiftMaster® IHSL24UL & INSL24UL Series Industrial-Duty and Lite-Duty Commercial Slide Gate Operators

PLA10

NICE Electric Gate Lock Vertical Mount 12V

Required for gates longer than 3m (9.84')
Vertical mounting
Possibility of manual opening
Power: 12V 15VA 50Hz

CP-TRF-110-24-20VA

Lynx Transformer 110/24V-20VA

Will work with old 455 Automatic Doorman opener

4580-304-PEBL/KAKI

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Pebble/Kaki 458-17

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

41C4672

LiftMaster RPM Sensor Kit Screw Drive *** To Extent of Inventory

For use with various LiftMaster® and Chamberlain® Screw Drive Garage Door Openers
Same as 041C4672

K20-1100B-2LP-H24

LiftMaster Electric Motor 1 HP 115/208-230V 1Ph Logic 5

For use with various LiftMaster® Logic 5.0 1-Phase Industrial-Duty Commercial Door Operators
Includes wiring harness

BL229-EX1929-G50

Automatic Systems Rising Barrier Gate with 16'5" Round Arm

Orientation of the arm (right or left) must be specified when ordering

HAE00072

Linear WiFi Wall Station

This Wi-Fi wall station allows direct operation of the door operator and light using the buttons.
When connected to your local wireless access point you can check status get notifications open or close the door and manage user access from any location via the Linear Android or iOS app.
Requirements: To use with the app you will need:
a Wi-Fi network with internet connectivity
a strong Wi-Fi signal in the garage where you are installing the wall station
an Android or iOS smartphone or tablet

.......more details

RESET-12A-32V

Doorlec Reset 12A 32V

19-41ML-SS

Master Link #41 Stainless Steel

For #41 chain

15450

Doorlec Tubular heater 120V for Gate Operators

HCT14

LiftMaster HCT Rail Only 14'

Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
Heavy-duty 12-gauge C channel corrosion resistant steel track.
This DOES NOT include the head unit
Will open a standard sectional door 13'6" high

K19-4853

LiftMaster Chain #48 x 53 No Master Links

Fits the SL595UL gate operators

ETBH-383-3/4HP

Doorlec 3/4HP 208V 3P Trolley Door Opener with solenoid brake

Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.

MOD007

Manaras Reverse Limits

Necessary feature when the opening and closing of the door corresponds to a different rotational direction than the operator

TRACK-SET-2-134-8

2" Tracks Set 8'-0" Torsion 1-3/4" Door Clips for Wood Frame 15" Radius *** By quote only

ALUM-554

Aluminum 24" x 100' Spool Chestnut Brown / Brun Marron # 554

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 554
Reverse side is #431 Bright White

Colour chart

4580-304-BRONZE

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Bronze (Commercial Brown) 458-47

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

K23-20523

LiftMaster Interlock Switch 125/250VAC 3A N4

For use with various LiftMaster® Commercial Door Operators

LPWKP-BLACK

Linear MegaCode Wireless Keypad 318 MHz Black ** To Extent of Inventory

Activates multiple MegaCode receivers
User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
Programming is easy via the keypad; MegaCode receiver auto-learns PIN
Backlit keys for easy viewing
Wall mounting hardware (2 screws and anchors) supplied
Power: Three AAA batteries

.......more details

MEL-II-TX10

Miller Edge Monitored Edge Link-II Transmitter

Miller Edge Monitored Edge Link II TRANSMITTER ONLY
Monitors the presence and function of any 10K (T2) monitored sensing edge
Provides a monitored wireless signal transmission from the sensor to the operator controls
Improved immunity to RF interference with 916 MHz operating frequency
Eliminates visible coil cords and retracting reels
Saves installation time

.......more details

WA11

NICE Adjustable Stand for L & M BAR Gate Op

Adjustable stand for the barrier arms of the M-Bar & L-Bar barrier gate operators
Attaches to ground and provides support when arm is down

CP-BR-ASSY-115V

Lynx Brake Kit with 115V Solenoid CDJH

Complete brake kit with solenoid

7-10-1

Double Slide Lock

FLOX2R/A

NICE Wireless Universal Digital Receiver 2-Channel 433 Mhz

Features step-by-step timer and anti-burglar functions.
Works with all standard gate operators.
Management of multi-user system through the unique personal code.
Uses BM250 memory which holds 255 codes.
Reception frequency : 433.92 MHz
Power input : 24V or 12V ac/dc ± 10%

.......more details

37557R

Genie Chain Drive Bullet Assembly

This Genie chain drive bullet assembly is the white piece that holds the chain for the garage door opener together.
Works with chain model Genie garage door openers that have a C-Channel rail.
The chain carriage assembly for these models also attaches to this chain bullet assembly allowing it to move the garage door open and closed up and down the rail.
Assembly contains: The 2 Bullet side white pieces and the four screws to install it
Compatible with Genie models that have a chain rail: 1028 2028 3020H 3020H-B 3024 4024 3022 3042 3120H 3120H-B 4022 4042 4124 4164 (ChainMax ReliaG IntellG and TriloG series with these model numbers)

85503

LiftMaster Belt Drive DC Battery Backup Wi-Fi W/Camera

Integrated Camera. Camera manually adjust 360 degrees to see everything that happens in the garage
HD-Quality Video. Glare-resistant night vision lens auto-adjusts to light levels in the garage to capture everything and anything that passes through the garage
Live Streaming and Video Storage. View a live-stream of your garage for free. 7-day and 30-day video storage options are available via a monthly subscription.
2-Way Audio. Communicate in real time between your garage and your smartphone
MyQ Technology now with Wi-Fi® enables secure monitoring and control of your garage door opener with a smartphone tablet or laptop.
DC Motor Belt System delivers powerful ultra-quiet performance.

.......more details

K20-3075B-4P-H24

LiftMaster Electric Motor 3/4 HP 230/240V 3P L5

This is a replacement Motor Kit (3/4 HP 230/460V 3PH L5).
Compatible with various LiftMaster® Logic 5.0 Standard-Duty Belt Commercial Door Operators

K41-39254

LiftMaster Reflector and Bracket Kit

Commonly used to replace a lost or damaged reflector for LiftMaster® Monitored Photoelectric Sensors (LMRRUL).
Complete kit includes: (1) Bracket (1) Reflector (1) Reflector Cover and Assembly Hardware
Compatible with LiftMaster® LMRRUL Monitored Retro-Reflective Photoelectric Sensors
Reflector Dimensions with Hood: 2.6" x 4.72" x 2.0" (W x H x D)
Reflector MUST be mounted vertically; no horizontal mounting

37300

Decorative Pull Handle Fleur-De-Lys Sold per Pair

Cast steel
Black powder coated with smooth finish
No rotation pull handle only
Approx 7-1/2" overall length

40659R

Genie Universal 4-Button Remote

Pre-programmed settings and a unique programming feature give homeowners a simplified compact multi-door and gate option
Easy to set up
Compatible with most major brands sold in the USA including: Overhead Door Genie Chamberlain Craftsman Ryobi Sommer Linear MegaCode Marantec Wayne Dalton Liftmaster FAAC Xtreme

DDO8900W

LiftMaster Light Duty Commercial Dock Door Jackshaft Op.

Ideal for commercial applications that require full vertical lift sectional doors with light-duty cycle requirements
Works with myQ® Business™ Facility to analyze and optimize productivity with intuitive control and monitoring capabilities.
LMi5 Interface monitors up to 5 external sensors enabling the DOCK DOOR SESSIONS feature in myQ business facility and visualization of productivity at the dock.
MyQ® Technology enables monitoring and control of the facility operators through a mobile app.
Built-In Wi-Fi® for simple operator internet connection.
Opens 50% faster in the up direction.

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

CANIMEX-H/CHAIN

Canimex Hand Chain 30.7 Zinc Plated Sold by Barrel Only 1000ft 126581

Unwelded Steel
For use with all Torque Force chain hoists
30.7-19-5 sold in 1000' barrel

IS40-XL

BEA Industrial Sensor Low Mount Dual Technology Presence Detection BEA-10IS40XL

Dual technology sensor combining presence and motion detection in industrial applications.
Bidirectional unidirectional approach and unidirectional depart microwave detection options. Six modes of detection filtering and 9 uniqueinfrared patterns for highliy flexible presence detection.
Up to 7 minimum object targets
Adjustable infrared immunity modes to mitigate environmental disturbances (vibrations light and sun)
Mounting height: 6.5ft - 11.5ft
NEMA 4

.......more details