Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MIRF-T2

Miller Edge Patriot 2 Photo Eye Non-Monitored 30ft Non-Contact

Attaches directly to a Sectional door.
The photo eyes travel below the door during the closing cycle.
Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
The Patriot2 non-contact system consists of thru beam photo optics.
Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.
If the beam is blocked the control unit signals the door operator to stop and/or reverse.
It is also available in fail safe wiring configuration (MIRF-T2).
Kit includes: Sender Receiver Telescopic Leg Kit 15 Feet Coil Cord and Junction Box with Cover

K77-16011

LiftMaster Hardware Kit for CPS N4

This is a replacement Sensor Hardware Kit only.

CA-151-412

Continuous Angle 1-1/2" x 4-1/2" x 151.5" L Sold per Piece

12-ga angle

BEARING051

Manaras Flange 2-Bolt Flange Bearing ID 5/8" Black

2 set screw holes 1/4-28 at 90 degree NO Set Screws provided
The original set screws are to be re-used

2376.206.30.870

Whiting Torsion assembly .206 wire size 30" spring length 87" shaft

E/BLOP/149

Automatic Systems Safety Edge for BL229 13'

541.3224.00

Whiting Outside Cam Lock w/Inside Release

An upcharge when ordering a Whiting door #3224 #77 & #7535.2-TG

CGH103L5-RH

LiftMaster Gearhead w/ Brake and Carwash Mod. 1 HP 208/230/460V 3-Phase Logic 5 Right Hand

Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
Security+ 2.0®
Includes CPS-UN4

.289_3-3/4"-RH

Torsion Spring .289 x 3-3/4" x 12ft RH

Wire size: .289
Inside diameter: 3-3/4"
Length: 12 ft

15-41B10G1

Sprocket 41B10T 3/4" Bore

Also known as: 15-41B10GXX 15-41B10G1 155010

HSC-BOLT-3002

Replacement Center Bolt for HSC-600 Swager Sold Individually

Replacement bolt only (1)

02-406-3

LiftMaster Key Set Qty 2

Replacement Key ONLY for 02-406 station
Keys for 02-406 2015 To Present #301 x 2

02-406-2

LiftMaster Key Set Qty 2

Replacement Key ONLY for 02-406 2006-2015 #1 or #1502M

422LMC

LiftMaster 2-Channel Co-Axial Receiver 390 MHz ***DISCONTINUED

Smart Garage Door Opener® electronics on each channel for fast programming
Bell wire attached for easy second channel hook-up
18 - 35VAC/DC
FCC certified 390MHz

26117

Doorlec Limit Cam Retainer Plate

Fits Most Doorlec Commercial operators except Explosion-Proof Operators
Will not fit on waterproof operators with small electrical enclosure built before 1999

MSC330V72-BULK

Motor Start Capacitor 330V 72-86MF

HSLG-123

Linear Commercial Slide Gate Operator 1 HP 230V 3 Ph - Heater not Included

Max duty cycle: Continuous
Integral APeX Controller
Double V-belt to chain reduction
#40 roller chain
Emergency manual disconnect handle
Powder coat finish

.......more details

PL-A23-RPM-BRKT

Lynx RPM Reader Board Bracket Only

MGR20-B-2U-PER-FT

Miller Edge Sensing Edge Round Black 2-Wire Universal Outlet Sold Per Foot

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
Non-monitored edge
Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)

PL-A21-RPM-WHEEL

Lynx RPM Reader Wheel

MA034RDOT

LiftMaster Articulating Square PVC Arm Kit Red/White with Retro-Reflective DOT Tape 9 ft

For use on Mega-Arm gate operator
Red White reflective DOT stripe
9 ft. x 2.5 in. square includes hardware kit (MA033)

Additional arm accessories

MOTOR256

Manaras Electric Motor 1 HP 120/240V 1PH

Continous-duty base mount ODP 60Hz

.234-3.5-11.25-LHW

Mini Storage Spring .234 x 3.5" x 11.25" long Looped Ends Left Hand

29138

Doorlec Transformer 208V pr 120V sec 50VA

208V prImary 120V secondary 50VA

4004-10FT

Aluminum Retainer only for Heavy Brush 10' Long 45 degree ** To extent of inventory

For angle application (45 degree)
For use with Heavy Brush

Q076

LiftMaster Turn Buckle Kit K75-50132

For Liftmaster trolley operator HCT

JB-02

Miller Edge Junction Box Metal

For commercial overhead doors that use coil cords or retracting reels
Standard metal junction box with cover
Includes 1 x 90-degree connector 1 straight connector
Includes strain relief + 2 wire nuts + pop-out holes
For single-angle bottom bar of rolling steel door
Also compatible with sectional door

.......more details

P-0130

Autogate Motor Belt Tensioner Upgrade Kit

This isneeded to change over to their current motor

050DCDDOWF

LiftMaster Receiver Logic Board WiFi Dock Door Jackshaft

050DCDDOWF is a Receiver Logic Board Replacement Kit.
Compatible with LiftMaster® Model DDO8900W DC Light-Duty Commercial Jackshaft Operators; featuring WiFi®

MV00210

Micanan Banner Reflector 3"

Compatible with Banner #MV-00300 reflective photocell

ME00008

Micanan Disconnect Shaft Gearhead 3/4" x 15.75"

7001-10-ANODIZED

Commercial Side & Top Weather-Strip 10' Long - Anodized 7001-AB

Anodized galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-7-ANODIZED

Commercial Side & Top Weather-Strip 7' Long - Anodized 7001-AB

Anodized galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Taupe
Full case quantity only (20)

ALUM-536

Aluminum 24" x 100' Spool Dover Gray / Gris Granite # 536

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 536
Reverse side is #431 Bright White

Colour chart

31118

Doorlec Sprocket 41B12-5/8" Plain Bore

Plain bore no keyway

Q118

LiftMaster Access Door Keys Qty 2 K80-50295

Also Known as K80-50295

7205

Whiting Balancer Bracket End - Roadside for Whiting Roll-Up Doors for #7176 Balancer

Steel construction
Plain finish
Whiting original

2524

Whiting Balancer Bracket End - Roadside for Whiting Roll-Up Doors

Steel construction
Plain finish
Cross Reference: W #2524 for #2376 balancer

BPPB17510

Garex Bottom PVC Moulding for 1 3/4" Door White U shaped 120"(10')

ME112-C3

Miller Edge L-Shaped PVC Mounting Channel Sold by the Foot

SHAFT120

Manaras Input Shaft for OSHW

SA1929/A17

Automatic Systems Retrofit Logic Board with Drive for BL229 Board *** Disc

Retrofit Assembly for the BL229 board this includes the new logic board with the drive.
Comes with E/BLOP/371 which are the loop detectors that go with that board. (no cost for the moment)

ME120-BLK-2WIRE-L

Miller Edge Black 2-Wire NM Left Hand Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

CPT-223-50

Miller Edge Bulk Extrusion 50' roll

For DIY quick fixes to repair or replace sensing edges for sectional and rolling steel doors measuring 1-1/2" to 2" thick with a mounting channel.
Sensivity: 15lbs max activation
Lead wire 18"-22 gauge unversal
Wire configuration: N.O.
Electrical interface: sealed module- provides seamless connection to logic or relay type operators
ANSI/UL325 recognized component

.......more details

601815

RG6 77% BR Coaxial Cable

Black coaxial cable
This price is for 1000 feet

0/7530/249

Automatic Systems 5/8 Left Hand Rod End with Zerk

Used on the BL229 gate op.

TRACK-SET-2STD-10

2" Tracks Set 10'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

MD00019

Micanan Sprocket 50B40 X 1" 1/4" KW 2SS 5/16

SPR50B36X1

Sprocket 50B36 1" shaft 1/4" KW

36 tooth sprocket for #50 chain

H14G04-BLACK

Hinge #4 x 14 gauge Black Powder Coated

Black powder coated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
Individually wrapped

22010

Doorlec 1-22mm Cylinder Complete with Normally Open Contact Spring Return Includes 2 keys

GAL.262-258-144L

delete

VMD202-R

EMX Remote Tuning and Adjustment Control Device

If you wish to “tune” the sensitivity the accessory VMD202-R will need to be plugged temporarily into the connector.
The VMD202-R may then be removed or left in place as desired.

111396.0004

Overhead Brake Kit Model H 1/2HP 1PH

Installation instructions

G-21X13-134-BLK

Thermal Window Clear 21" x 13" for 1-3/4" Garaga Door Black

For 1-3/4" thick door

26124

Doorlec Clutch Shaft 12-5/8" x 5/8" LJH

Previous shaft size was 11-3/4" but have now been replaced by 12-5/8" to accomodate larger box size

.192-2-R

Cut-to-Length Torsion Spring .192 x 2" Right Hand Wound Silver

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

2806.162.18

Whiting .162 x 2-3/16 x 18" Roadside with Cones

SELECTOR-BTN-8L5

Devanco replacement rotating black button for 8L5-OCS

replacement black button but for rotating 8 position selector for 8L5-OCS

WA10

NICE Red Adhesive Reflector Strips 24pcs/Pkg

12576

Doorlec Clutch Disc Fiber 4" dia.x 1" bore

Fits model ETBHW/ETHW

DHJ501L5-RH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 1/2 HP 115/230 VAC Logic 5 Right Hand***Discontinued

Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
Optimal for shopping mall applications with heavier rolling doors and grilles.
Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
Industrial Ball Bearings on 1" Output Shaft
Second Floor-Level Disconnect for Manual Lifting in an Emergency

.......more details

DHJ501L5-LH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 1/2 HP 115/230 VAC Logic 5 Left Hand***Discontinued

Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
Optimal for shopping mall applications with heavier rolling doors and grilles.
Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
Industrial Ball Bearings on 1" Output Shaft
Second Floor-Level Disconnect for Manual Lifting in an Emergency

.......more details

BK009

Commercial Top Bracket Adjustable 1-Bolt Tall Sold per Piece

Zinc plated
12 gauge roller carrier and base plate

MP00069

Micanan Jackshaft w/Aux Trolley Assembly Mod. 7ft High Door #41 Trolley Drive Chain

Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
NOTE: Operator must be supplied with reverse limits
If purchasing for field install the limits on the operator would need to be reversed

CP-BRK-WALL

Lynx Wall Bracket Commercial Operators

DOC-6000

Atlas Door Operator Board

The Atlas board has been discontinued the Lynx 6000 is a direct replaceement

HW-SP-BL

Lynx Disconnect Spring

1004-2-12'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 12 ft***Actual Length 12'2"***

For door thickness 2"

DXT-25

Linear 5-Btn 8-Channel Handheld Transmitter 315 MHz *** Available to extent of inventory

A battery powered portable transmitter designed for use with Linear’s DX Format receivers.
Each transmitter can be used in a limitless number of wireless remote control applications.
Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver
The digital DX code format features over a million possible codes.
The DX transmitters are precoded at the factory to unique codes so no field coding is required
Powered by two 3-Volt #2032 lithium batteries included

.......more details

MICANAN-H/CHAIN

Micanan Charge for Hand Chain on Doors Over 16'

Up-charge only

Q170

LiftMaster Control Box Cover HCT K75-50190

Replacement Control Box Cover Q170.
Compatible with LiftMaster® Model HCT Overhead Gate Operators

510.3920.05

Whiting Stainless Steel Rivets Option for Dry Freight Door 4-Rows of Hinges 5 Panels

Upgrade option

MOUNTSHAFT018E

Manaras Limit Shaft Kit For Damp/Corrosive Env.

For operators with W or C Modification

C9/90-KIT

Felco C9 Parts Kit Only

Parts kit only
Kit consists of main bolt nut counter nut and washer.

MZ-00005

Micanan Synthetic Oil in Reducer Cold Temp. Mod.

For models PRO-GH GHC GT and GSD

CAP425

Capacitor 125VAC 425MFD

Motor Start Capacitor 125V 425 MFD

EP2982-NL

Exhaust Port 4" non latching short barrel

4" inside diameter 1/4" sleeve
Includes fasteners & gaskets.
Polished aluminum finish.

41D8859

LiftMaster Cover 8550WL WLED

Burgundy Replacement Cover.
This one piece cover is compatible with various LiftMaster® Lock Capable Garage Door Openers Powered by myQ®; manufactured after 2017

41D9276

LiftMaster End Panel Logic Board

041D9276 is a End Panel for Receiver Logic Board with LED Light Connector Replacement Kit.
For use with LiftMaster® and Chamberlain® Garage Door Openers Powered by myQ®; manufactured after 2018
Compatible with WLED model

41D0277-1

LiftMaster Transformer WiFi Battery Backup

For Wi-Fi Battery backup garage door openers; manufactured after 2011
Same as #204D0277-1

SM101

Miller Edge Signature Module for T3 Monitored Plugs w/ JB-03

Commercial signature module for use in commercial door and gate operators built after August 29 2010.
Engineered to emulate monitored pulse signal required by some commercial door operators.
LED light indicates device power or fault conditions.
Nema 4
Temperature range: -31F to 158F
5 to 40V DC

.......more details

K1D8389-1CCU

LiftMaster Upgrade Kit with Eyes DC Pad Mount for UL325

Upgrade Kit for models CSW24V CSW24VH CSW24VDC CSL24V CSL24VH and CSL24VDC UL325 Approved Gate Operators; manufactured 2012 to 2015.
Complete kit includes: Main Control Board Expansion Board LiftMaster® Monitored Retro-Reflective Photoelectric Sensor Kit UL Upgrade label and Adapter Harness (used with CSW24V CSL24V and CSL24VH only)