Devanco Canada - Get The Right Garage Door Opener‎ and Parts

AW-10

Miller Edge Air Wave Switch Only No Enclosure

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm
Ambient temperature range: -49F to 180F
Electrical configuration: 2 wire NO
Adjustable sensitivity
Mechanical life: minimum 2 million operations
Electrical life: 1 million operations depending on contact load

Instruction manual Sell sheet

VMD202-50

EMX Vehicle Motion Detector Probe with 50ft Lead Wire

The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
The probe and its electronics are housed in a slim design that is buried next to a driveway.
The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
Probe assembly and wire are water tight and direct burial compatible
Harness is pre-wired onto lead wire for easy installation
Settings are placed in a non-volatile memory in case of power failure

.......more details

VMD202-R

EMX Remote Tuning and Adjustment Control Device

If you wish to “tune” the sensitivity the accessory VMD202-R will need to be plugged temporarily into the connector.
The VMD202-R may then be removed or left in place as desired.

111396.0004

Overhead Brake Kit Model H 1/2HP 1PH

Installation instructions

G-21X13-134-BLK

Thermal Window Clear 21" x 13" for 1-3/4" Garaga Door Black

For 1-3/4" thick door

26124

Doorlec Clutch Shaft 12-5/8" x 5/8" LJH

Previous shaft size was 11-3/4" but have now been replaced by 12-5/8" to accomodate larger box size

.192-2-R

Cut-to-Length Torsion Spring .192 x 2" Right Hand Wound Silver

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

2806.162.18

Whiting .162 x 2-3/16 x 18" Roadside with Cones

RAH-750-100

Pure Gum Rubber Air Hose 3/4" ID 1/8" Wall Beige 100ft

SELECTOR-BTN-8L5

Devanco replacement rotating black button for 8L5-OCS

replacement black button but for rotating 8 position selector for 8L5-OCS

1004-2-14'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 14 ft***Actual Length 14'2"***

For door thickness 2"

12576

Doorlec Clutch Disc Fiber 4" dia.x 1" bore

Fits model ETBHW/ETHW

JA383

FAAC Sprint 383 Board 115V

DHJ501L5-LH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 1/2 HP 115/230 VAC Logic 5 Left Hand***Discontinued

Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
Optimal for shopping mall applications with heavier rolling doors and grilles.
Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
Industrial Ball Bearings on 1" Output Shaft
Second Floor-Level Disconnect for Manual Lifting in an Emergency

.......more details

MK01428

Micanan Digital Countdown Timer

DC-Digital

MP00069

Micanan Jackshaft w/Aux Trolley Assembly Mod. 7ft High Door #41 Trolley Drive Chain

Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
NOTE: Operator must be supplied with reverse limits
If purchasing for field install the limits on the operator would need to be reversed

50690

Doorlec Clutch Assembly for ETBH

CP-BRK-WALL

Lynx Wall Bracket Commercial Operators

DOC-6000

Atlas Door Operator Board

The Atlas board has been discontinued the Lynx 6000 is a direct replaceement

HW-SP-BL

Lynx Disconnect Spring

ST101-INT-WHITE

Lynx Intermediate Panel White 10x24

MH00027

Micanan Collar 1/2" ID

DXT-25

Linear 5-Btn 8-Channel Handheld Transmitter 315 MHz *** Available to extent of inventory

A battery powered portable transmitter designed for use with Linear’s DX Format receivers.
Each transmitter can be used in a limitless number of wireless remote control applications.
Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver
The digital DX code format features over a million possible codes.
The DX transmitters are precoded at the factory to unique codes so no field coding is required
Powered by two 3-Volt #2032 lithium batteries included

.......more details

MICANAN-H/CHAIN

Micanan Charge for Hand Chain on Doors Over 16'

Up-charge only

PRO-HHD-10053E-R

Micanan 1 HP 575V 3P Heavy-Duty Jackshaft NM ECB No Eyes Right Hand

1 HP575V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Non-Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included
Emergency chain hoist with electrical cut-off for manual operation

.......more details

Installation Manual Specification Sheet

Q170

LiftMaster Control Box Cover HCT K75-50190

Replacement Control Box Cover Q170.
Compatible with LiftMaster® Model HCT Overhead Gate Operators

510.3920.05

Whiting Stainless Steel Rivets Option for Dry Freight Door 4-Rows of Hinges 5 Panels

Upgrade option

MOUNTSHAFT018E

Manaras Limit Shaft Kit For Damp/Corrosive Env.

For operators with W or C Modification

C9/90-KIT

Felco C9 Parts Kit Only

Parts kit only
Kit consists of main bolt nut counter nut and washer.

MZ-00005

Micanan Synthetic Oil in Reducer Cold Temp. Mod.

For models PRO-GH GHC GT and GSD

CAP425

Capacitor 125VAC 425MFD

Motor Start Capacitor 125V 425 MFD

EP2982-NL

Exhaust Port 4" non latching short barrel

4" inside diameter 1/4" sleeve
Includes fasteners & gaskets.
Polished aluminum finish.

3BXL

Control Station Exterior Surface Mount O/C/S N4 with Key Lockout

Metal Enclosure
Buttons aligned in a triangular pattern
H=4-3/8" W=4-1/8" D=2-5/8"

3BXL

41D8859

LiftMaster Cover 8550WL WLED

Burgundy Replacement Cover.
This one piece cover is compatible with various LiftMaster® Lock Capable Garage Door Openers Powered by myQ®; manufactured after 2017

41D9276

LiftMaster End Panel Logic Board

041D9276 is a End Panel for Receiver Logic Board with LED Light Connector Replacement Kit.
For use with LiftMaster® and Chamberlain® Garage Door Openers Powered by myQ®; manufactured after 2018
Compatible with WLED model

41D0277-1

LiftMaster Transformer WiFi Battery Backup

For Wi-Fi Battery backup garage door openers; manufactured after 2011
Same as #204D0277-1

31105

Doorlec Sprocket 41B23 1" Bore

SM101

Miller Edge Signature Module for T3 Monitored Plugs w/ JB-03

Commercial signature module for use in commercial door and gate operators built after August 29 2010.
Engineered to emulate monitored pulse signal required by some commercial door operators.
LED light indicates device power or fault conditions.
Nema 4
Temperature range: -31F to 158F
5 to 40V DC

.......more details

ME-00009

Micanan Trolley Track Spreader Bar Assembly 1 Unit Only

3/4" x 5.79" long
2 are included when bought in the kit #MX-00119

39360R.S

Genie Optical Encoder Assembly for Belt/Chain Drive

Compatible with many of the newer Genie chain and belt drive openers.
New DC Optical Encoder Assembly for Chain and Belt Drive Garage Door Openers.
Also Compatible with Overhead Door Odyssey Series #7030 and Destiny Series #8030 Chain and Belt Drive Garage Door Openers.

PRO-SD-10011-U-RH

Micanan 1 HP 115V 1P Horizontal Sliding Door Op. Monitored ECB N1 Eyes Right Hand

Designed for use on commercial / industrial sliding doors or sliding fire doors
External radio control terminal strip
3-btn O/C/S control station Nema 1
#41 roller chain & sprockets on all internal drives
Heavy duty 5L v-belt
Solenoid brake standard

.......more details

FEP100N

Pneumatic Safety Edge End Caps Included Sold by the Foot

Must specify if L-retainer is required

28-32082

Truck Door 2" Horizontal Track with 8" Radius 120" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 120" Fits door sizes: Greater than 96" high
Cross Reference: W #11-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

PPV3M

LiftMaster Passport MAX 3-Button Visor Remote

Provides total control with one remote for gated communities and commercial properties.
Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)

C-26-1/4X14-134-W

Thermal Window 26-1/4" x 14" for 1-3/4" Cedo Door White

For 1-3/4" thick door

CAP001

Manaras Push Button Sealing Boot for LIMIT017

2500-2393

Linear Apex I Module

Older model prior to Jan 2016

PRO-APTC-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

PL-A22-BOARD

Lynx RPM Reader Board Proline

3500

Whiting Beverage Align Roller 1" Screw Type

A Whiting original

26CW945215-CUT

Truck Door Intermediate Panel (11.5" x Cut-to-Size ) Painted White for Whiting Dryfreight

These panels are cut to customer's exact measurements.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

.262-258-L

Cut-to-Length Torsion Spring .262 x 2-5/8" Left Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

IRB-TX

EMX Industries Transmitter Board Only for IRB-4X *** NLA

PRO-GH-10011U-R

Micanan 1 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

PRO-GH-10011U-L

Micanan 1 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

MOTOR272

Manaras Electric Motor 1/2HP 600V 3PH

Continuous-duty base mount ODP 60Hz •This item is compatible with BRAKE011

PRO-GH-7543U-R

Micanan 3/4HP 460V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-GH-7523U-L

Micanan 3/4HP 230V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

25-42-190

Extension Spring 7' Door - 190 lbs Light Blue

Single - Loop
25" long 42" stretch 190 lb load
Sold individually
Rated for 10000 cycles

C-334-114-INSTAL

Cones 3-3/4" Factory Installed (Pair) 1-1/4" bore

For do-it-yourself installation use part no. SF375-114

PPLK1-100

LiftMaster Passport Lite 1-Button Mini Remote with Sec+ 2.0 Technology 100/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Keychain remote control sold in a 10 pack

.......more details

Programming instructions Instructions de programmation Sell sheet Brochure

K1D7078

LiftMaster EMI Board

This is a replacement EMI Board. Compatible with LiftMaster® Model HCT Overhead Gate Operators

.421-514-L-C

Cut-to-Length Torsion Spring .421 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

.375-334-R-C

Cut-to-Length Torsion Spring .375 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

620-100990

Linear Heater Kit Assembly 230V Cage Style

Cage style heater is suited for large post mount operators (HSLG GSLG VS-GSLG SWG VS-SWG)

.363-514-R-C

Cut-to-Length Torsion Spring .362 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold separately
For factory installed cones use part no. C-514-INSTALLED

.343-514-R-C

Cut-to-Length Torsion Spring .343 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-525-INSTALLED
If cones are required a filler must be added use part # FILLER

.343-334-L-C

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.319-258-R-C

Cut-to-Length Torsion Spring .319 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-258-Installed

.312-514-R-C

Cut-to-Length Torsion Spring .312 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.306-514-L-C

Cut-to-Length Torsion Spring .306 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.306-258-R-C

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

.295-6-R-C

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-600-INSTALLED

.295-134-R-C

Cut-to-Length Torsion Spring .295 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.295-134-L-C

Cut-to-Length Torsion Spring .295 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.283-258-L-C

Cut-to-Length Torsion Spring .283 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

.273-334-R-C

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.273-258-L-C

Cut-to-Length Torsion Spring .273 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.262-2-R-C

Cut-to-Length Torsion Spring .262 x 2" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.243-258-L-C

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.243-2-R-C

Cut-to-Length Torsion Spring .243 x 2" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.234-258-R-C

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.234-134-R-C

Cut-to-Length Torsion Spring .234 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.225-2-R-C

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.218-2-L-C

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.207-258-R-C

Cut-to-Length Torsion Spring .207 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.207-258-L-C

Cut-to-Length Torsion Spring .207 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.207-134-L-C

Cut-to-Length Torsion Spring .207 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

PRO-GH-7581U-R

Micanan 3/4HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

218756

Torque Force Spring Failure Device 1" Shaft Right Hand Side DT0054

For springs 2" up to 6"
This device can be applied on Industrial OH doors that are manual or motor operated
Must be installed on a keyed shaft

MOTOR273

Manaras Electric Motor 3/4HP 208/480V 3Ph

Continuous-duty base mount ODP 60Hz
This item is compatible with BRAKE011

2704.206_325

Whiting Roadside Torsion Spring 2-3/16" ID 32-1/2" Long

Torsion spring wire only
.206 wire size

PRO-HB-5021U-RH

Micanan 1/2HP 230V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-H-7583-U-LH

Micanan 3/4HP 208V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

PRO-H-7581-U-LH

Micanan 3/4HP 208V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

PRO-H-5038-U-LH

Micanan 1/2HP 380V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

PRO-H-5043-U-RH

Micanan 1/2HP 460V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

PRO-H-5023-U-RH

Micanan 1/2HP 230V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

K72-19974-RB

LiftMaster Output Shaft & Sprocket

Kit includes: Output shaft sprocket assembly dual sprocket 32/14 sprocket 48B18x1 sprocket 50B12x1 ring washer key set screw roll pin and thin walled receivers