Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

MM00139

Micanan N-4 Cable Entry Tube

K79-13493-2-600

LiftMaster Logic Board Replacement Kit FDCL Firmware Version 600

  • Replacement board for fire door model FDCL
HCT08

LiftMaster HCTDCU Rail Only for 7'6" Door

  • Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
  • Heavy-duty 12-gauge C channel corrosion resistant steel track.
  • This DOES NOT include the head unit
65-92131

LiftMaster Dual Aux Trolley Mod. M15 #41 Chain for 12ft High Door

  • Provides drawbar-type operation on very wide (over 22 ft) standard lift sectional doors where a side-mount op. is preferred over a drawbar op.
  • Includes up to 12ft of tracks
  • For H/J/GH
26CW945255

Truck Door Intermediate Panel (15.5" x 98") Painted White for Whiting Dryfreight

  • These panels are 15.50" height x 98" width.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
8030279

Marantec Replacement Belt with Tab for 8ft Door

  • Overall Belt Length = 250"
  • Travel limit tab attached to belt
  • For Marantec opener models: M4500 M4700 Q7500 Q7700 Q7900 M4500e M4700e M4900e Synergy 260 Synergy 270 Synergy 280 Synergy 360 Synergy 370 Synergy 380 Synergy Solo
  • Check the Belt Connector while you are replacing the belt. If it's worn or cracked it should also be replaced
106-0005

Rodent Block Pull Chain Seal 2"

  • Often overlooked and left unprotected the opening for the pull chain on dock levelers is an ideal entry point for mice and rats.
  • The chain provides a built-in ladder for pests and the chain opening is more than big enough for rats or mice to squeeze through.
  • Features solid cast aluminum construction easy to install and completely cover the chain opening.
  • The seals are designed to sit completely below the surface of the dock plate and will not interfere with material handling equipment.
OSH-6812-ECB-LH

Manaras Opera-SH 1/2 HP 208V 1Ph with Electronic Circuit Board Left hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
  • .......more details
106-0006

Rodent Block Pull Chain Seal 2.5"

  • Often overlooked and left unprotected the opening for the pull chain on dock levelers is an ideal entry point for mice and rats.
  • The chain provides a built-in ladder for pests and the chain opening is more than big enough for rats or mice to squeeze through.
  • Features solid cast aluminum construction easy to install and completely cover the chain opening.
  • The seals are designed to sit completely below the surface of the dock plate and will not interfere with material handling equipment.
0220-1K-390

Heddolf 1-btn Overhead Compatible Remote 9 Dip Switch 390 MHz

  • Overhead compatible full-size transmitter
CP-SH-58-1038-LS

Lynx Limit Shaft Only

  • 5/8" x 10-3/8"
  • Used on most of Lynx operators
2528.087

Whiting Dual-Spring Shaft 87" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • Holes pre-drilled
  • Cross Reference: For Whiting # 2376 balancer
14-1002

PVC Roll 8" x .120" Standard Smooth 200' for Replacement Strip Curtain

  • Suitable for most average applications.
  • Temperature Range: -20°F to 150°F (-28° C to 66° C).
  • Formulated with ingredients that meet USDA requirements for incidental food contact.
RESET005

Manaras Resettable Overload Fuse 8A 1 Phase

LA400-JB40

LiftMaster Junction Box w/Cable 40'

IRB-325-HD

EMX Industries Steel Protective Hoods Only Grey Powder Coat Set of 2

  • Protective Hoods for the Thru-Beam Photo Eye System (Item #IRB-325) by EMX
  • Easily installed using the existing mounting holes of the Photo Eye
  • Constructed of zinc plated steel
  • Grey powder-coated finish
  • 9" x 3"
510.4228.07

Whiting Double End Hinges DF SS/Nylon - 7 Panel Door Add-On Option

  • Add-on option when ordering door.
BRAKEPART020

Manaras Brake Shoe Assembly Kit (SHOE021/022)

510.2543.00

Whiting Narrow Mounting Angle for Posts Under 2-1/2" IN

  • This is an upcharge when ordering certain doors
CP-PW-NM-34

Lynx Pocket Wheel for HDC

15-10885

LiftMaster Dual Sprocket 48B10/41A24

  • Also known as: G1510855 156016 G156016 15-10885 15-6016 71156016
SL585501UL

LiftMaster Industrial Slide Gate Op. 1/2 HP 115/230/208 Volt 1 Ph Heater NOT Incl.

  • Features a heavy- duty industrial lockable metal cover
  • MyQ® Technology enables you to securely control and monitor your gate operator from anywhere
  • Homelink® Compatible (version 4.0 and higher)
  • Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
  • Manual Disconnect when unlocked allows gate to be operated manually.
  • Quick Close and Anti-tailgate quickly secure property preventing unauthorized access
  • .......more details
LOTBINIERE-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Overlay moldings positioned to create the Lotbiniere design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
URBAN-MR-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Narrow multi rib pattern - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
2806.187*300

Whiting .187 x 2-3/16 x 30" Roadside with Cones

D800-120-125

Cable Drum High Lift 800-120 1-1/4" HL Pair

  • Adjustable cable attachment with screw
  • Made of aluminum
  • High Lift capacity: 120" max
  • Flat capacity: 266" max
  • Rating: 2200 lb per door max
  • Keyway: 1 KW of 1/4" width
  • .......more details
2807.177.230

Whiting Spring Assby .177 x 2-3/16 x 23" Curbside

  • Replacement torsion spring with cones
  • Specs: .177 x 2-3/16" x 23" Long
  • For Roadside order part # 2806.177.230
2806.177*230

Whiting Spring Assby .177 x 2-3/16 x 23" Roadside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 23" Long
  • Roadside
  • For Curbside order part # 2807.177*230
26-40019

Truck Door Bottom L-Retainer 90" Long for Todco Roll-Up Doors

  • Galvanized steel construction for extra strength and corrosion resistance.
  • Fits both standard and heavy-duty bottom seals.
  • Pre-punched holes for added convenience
  • Cross Reference: T #61191 W #4034 260000
IRB-SH-SET

EMX Industries Steel Protective Hoods Only Grey Powder Coat Pair

  • Includes 2 hoods
  • Powder-coated steel construction
  • Compatible with EMX IRB-MON EMX IRB-4X safety photo beam sensors
  • Each hood fits easily over gate/garage door opener sensor
2376.206.30.870

Whiting Torsion assembly .206 wire size 30" spring length 87" shaft

PUSH148

Manaras Contact Block NO

  • Same as ZEN-L 1111
MX00218

Micanan Clutch Shaft Assembly for PRO-LH

1013-1-1/4-18'

Rigid Vinyl Bottom Retainer L-Shaped 18' Long

  • For door thickness: 1-1/4"
LA500SLRHARN

LiftMaster Solar Harness Kit LA500

.289_3-3/4"-RH

Torsion Spring .289 x 3-3/4" x 12ft RH

  • Wire size: .289
  • Inside diameter: 3-3/4"
  • Length: 12 ft
ERN

Erone 4-Channel Transmitter 433MHz

  • Innovantive and extreme crashworthiness
  • Casing: aluminum and black polycarbonate
  • Range (line of sight): up to 250 m (820 ft).
  • Dimensions: 70 mm x 40 mm x 10 mm (2.75 in. x 1.57 in. x 0.4 in.)
  • Comes with: One lithium battery (2032)
  • Optional 26-bit Wiegand proximity tag built-in: ERN (old #S7TR2641E4T (HID) old # S7TR2641E4M (Mifare)
  • .......more details
.192_2-3/16_60R

Spring Wire .192 x 2.188 x 60" CTD RAW RH

  • .192 x 2-3/16" x 12'
.25W8.2

Resistor 1/4 W 8.2K OHM

  • Dimensions (W X H X L) 6 X 15 X 3 CM
422LMC

LiftMaster 2-Channel Co-Axial Receiver 390 MHz ***DISCONTINUED

  • Smart Garage Door Opener® electronics on each channel for fast programming
  • Bell wire attached for easy second channel hook-up
  • 18 - 35VAC/DC
  • FCC certified 390MHz
26117

Doorlec Limit Cam Retainer Plate

  • Fits Most Doorlec Commercial operators except Explosion-Proof Operators
  • Will not fit on waterproof operators with small electrical enclosure built before 1999
MG020-B-4E-P/FT

Miller Edge Sensing Edge Black 4-Wire Monitored End Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
  • .......more details
27-83190

Truck Door W-Style Track and Operator 90 x 90 Door

  • Includes: 1 dual spring operator 2 horizontal tracks 2 vertical tracks
LM56A

LiftMaster Magnetic Proximity Reed Switch

  • Normally Open magnetic sealed reed switch; proximity switch
  • Used for overhead door contacts.
41D4509

LiftMaster Motor Kit ATS211

  • Also known as: K75-16424 41D4509 123D0155 123D155
K180A0357

LiftMaster Reset Switch

  • Compatible with LiftMaster RSW12UL CSW24V swing gate operators
  • Switch to Reset/Disconnect position to disconnect the operator for manual operation
  • Switch to Normal Operation position to return to automatic gate operator functions
  • Dimensions: 3/4" L x 3/8" W x 2" H
TRANSF005

Manaras Transformer 120V-24V 40VA

  • Transformer 120V Primary 24V Secondary 40VA
K23-34815-1

LiftMaster Stop / Reset Switch

  • For use with SL595UL Series heavy-duty industrial slide gate ops
60-6550-A-BLK

Speed Bump Black 36" Econo Light Weight for Asphalt

  • A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
  • Main pieces may be added and connected to form larger units.
  • 36” long x 10.5” wide x 2” high (main piece)
  • EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
  • Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
  • Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.
  • .......more details
620-101293

Linear Apex II Module

  • Newer model from Jan 2016
  • The APEX II is backwards compatible but you will need to add monitored external entrapment devices.
29138

Doorlec Transformer 208V pr 120V sec 50VA

  • 208V prImary 120V secondary 50VA
K21-38158

LiftMaster Current Sense Harness Kit 3PH L5

  • This is a Current Sense Harness (230/460/575V) Replacement Kit.
  • Compatible with various LiftMaster® 3 Phase Logic 5.0 Commercial Door Operators; manufactured after February 2016.
  • Complete replacement kit includes: (2) current sense harnesses of different lengths to accommodate all models.
  • Models manufactured before February 2016 DO NOT feature current sense technology.
  • We highly recommend replacing the existing boards with an updated Logic 5.0 system that utilizes current sense technology
  • Refer to the following replacement boards for compatible upgrades: K001D8395 1PH/3PH Logic Board for all L5 models K001D8397 3PH/L5 Power Board 230/460V
  • .......more details
RELAY008

Manaras Relay AB 700-HA33A24 11 Pin TP

  • Allen Bradley
10.1003.150

Whiting Step Bolt Stainless Steel 1-3/8"

M-0319

Autogate Groschopp Inline Motor 24V

050DCDDOWF

LiftMaster Receiver Logic Board WiFi Dock Door Jackshaft

  • 050DCDDOWF is a Receiver Logic Board Replacement Kit.
  • Compatible with LiftMaster® Model DDO8900W DC Light-Duty Commercial Jackshaft Operators; featuring WiFi®
CBC532-SS

Thimble 5/32" Stainless Steel Sold Individually

7001-12-ANODIZED

Commercial Side & Top Weather-Strip 12' Long - Anodized 7001-AB

  • Anodized galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-7-ANODIZED

Commercial Side & Top Weather-Strip 7' Long - Anodized 7001-AB

  • Anodized galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (20)
41A5635A

LiftMaster Receiver Logic Board 390 MHz ** To extent of inventory

  • Compatible with a number of dual capacitor chain drive models including 2575 2585 2595 PD752 and PD758S manufactured between 2001 and 2005
  • Also known as: 41A5483-15 41A5635 01A5635A
CP100C

Coupler Specialty Coated 1" Bore

  • Coated with 1000 plus hr salt spray rated finish
  • 1" Bore with 1/4" keyway
  • Malleable iron for high strength and resistance to shock loading
  • Coupler halves separates and is adjustable
  • 4-(3/8"-16 x 1" square head set screws installed
  • Rust inhibitor coating
  • .......more details
7205

Whiting Balancer Bracket End - Roadside for Whiting Roll-Up Doors for #7176 Balancer

  • Steel construction
  • Plain finish
  • Whiting original
7206

Whiting Balancer Bracket End - Curbside for Whiting Roll-Up Doors for #7176 Balancer

  • Steel construction
  • Plain finish
  • Whiting original
BPPB17512

Devanco Bottom PVC Moulding White for 1 3/4" Door U shaped 144"(12')

BPPB17524

Garex Bottom PVC Moulding White for 1 3/4" Door U shaped 289"(24')

ERM40600H00

NICE Era MH Tubular Motor 40Nm 14rpm 120/60 12'

  • There must be at least 0.4 m between the driven parts and any xed elements
  • If the cable is damaged the appliance must be scrapped. The power cable cannot be replaced
SA1929/A17

Automatic Systems Retrofit Logic Board with Drive for BL229 Board *** Disc

  • Retrofit Assembly for the BL229 board this includes the new logic board with the drive.
  • Comes with E/BLOP/371 which are the loop detectors that go with that board. (no cost for the moment)
K20-1100-1T

LiftMaster Electric Motor 1/2 HP 115V 1Ph TEFC **DISCONTINUED

  • Compatible with LiftMaster® Model SW490GL Swing Gate Operators
  • Also known as: 20-1100-1T 2011001T G2011001T
H7NA12

Richards-Wilcox Hinge 7NA x 12 Gauge Roller Bracket

  • Galvanized 12 gauge hinge
AM-DPR

Linear Dual Proximity Reader

  • Compatible with most Wiegand formats up to 40 bits
  • Weather resistant and vandal resistant
  • 4 to 6 inch read range
  • Supports up to 65000 cards
  • Easy to install
  • Integral LED confirms when user access is granted
  • .......more details
ME120-BLK-2WIRE-L

Miller Edge Black 2-Wire NM Left Hand Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
  • .......more details
7-2239

Richards-Wilcox 3" - 7/16" Short Shaft Roller Super 3

  • Original Richards-Wilcox part
  • Roller diameter is 3" good for a 3-1/4" track
0/7530/248

Automatic Systems 5/8 Right Hand Rod End with Zerk

  • Used on the BL229 gate op.
TRACK-SET-2STD-14

2" Tracks Set 14'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

TRACK-SET-2STD-12

2" Tracks Set 12'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

KP-680-ETL

Koala Air Blower 1/2 HP *** Indef. Delivery

  • Powerful extra quiet and energy efficient 1/2 HP motor
  • 115V / 1 Speed
  • Durable super lightweight and compact Polypropylene housing design
  • ETL/CETL Safety Certified
MD00019

Micanan Sprocket 50B40 X 1" 1/4" KW 2SS 5/16

CGH101L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod. 1 HP 115/230V 1P L5 - Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting except when a MOD is added
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
  • .......more details
MTR1

Linear 1-Channel Visor Transmitter 318MHz

  • Activates one MegaCode receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Visor clip mounts vertical or horizontal
  • Power: One 2032 battery
  • Codes: 1000000+ (MegaCode format)
  • .......more details
4JW-LEFT

Rolling Steel 3" Curved Cast Windlock 273002 LH

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
  • .......more details
60-7531

Fasteners Wedge Anchor 3/4" x 5-1/2" 4/Bag

  • Secure anchoring into concrete brick or block
  • Ideal for mounting dock bumpers
  • 4 per bag
STATION082

Manaras Push Button Control Station 2-Button Nema 4/12

  • 2-button 2 N/O contact
  • Plastic
BRX10

GDI Brake Kit Brake Kit with Pull-rods; Axial

HD3120-BLACK

Commercial 3" Inside Slide Lock Black Powder Coated

  • Track use: 2" or 3"
  • Throw: 2.62"
  • Slide bar: 0.138"
  • Individually wrapped
GBUP412EF-1

Gate Roller 4-1/2" x 2-3/8" Polymer Sold Individually

  • Polymer gate roller with bracket for 4-1/2" upright post
  • Works with gate pipes that are 2-3/8" thick or less
19-48055MB

LiftMaster Limit Chain Assembly #48 x 55

  • Fits the SL575 & SL585GL gate operators
  • Same as K19-48055MB
GBU312EF-1

Gate Roller 3-1/2" x 2-3/8" Galvanized Sold Individually

  • Galvanized gate roller with bracket for 3-1/2" upright post
  • Works with gate pipes that are 2-3/8" thick or less
MD00077

Roller Chain #40 Sold by the Foot

HAE00012

Linear Motor Cover LDO50

  • Replacement motor cover only
OSH-6813-ECB

Manaras Opera-SH 3/4 HP 208V 1Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
  • .......more details
112561

Allstar MVP-RE 24V 8 Wire Receiver 288 MHz *** NLA

  • Three channels – three relay outputs
  • 8-wire operator connection
  • Wire whip antenna with “F” connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
  • .......more details
MOD130

Manaras Cogged V-Belt Upgrade

  • The standard v-belt is replaced by a cogged v-belt for added durability
  • Applies to: OSH OTH OTH-A.00 OTBH OTBH-A.00
  • This is available only as an upgrade with the purchase of a commercial op.
GAL.262-258-144L

delete

RBH505L5-RH

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 Right Hand

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
  • .......more details
7M-NICE-BAR-ASBY

NICE Replacement Bar Assembly for M7BAR Barrier Gate

  • Bar assembly comes with:
  • (1)XBA15 -- 3M BAR
  • (1)XBA14 -- 4M BAR
  • (1)XBA9 -- EXPANSION JOINT FOR CONNECTING BARS
  • (2)XBA13 -- RUBBER IMPACT PROTECTION STRIP
  • (2) WA10 -- RED ADHESIVE REFLECTIVE STRIPS
  • .......more details
CP-BRK-CAM-MCJ

Lynx Retaining Plate & Hardware for MCJH

BEARING006

Manaras Flange Sealed Bearing 5/8"

  • Flange sealed bearing for 5/8" shaft
RAH-750-100

Pure Gum Rubber Air Hose 3/4" ID 1/8" Wall Beige 100ft

P-75

End Plug for 3/4" ID Rubber Hose

  • Sold per plug
SELECTOR-8L5

Devanco replacement rotating 8 position selector for 8L5-OCS

  • replacement rotating encoded 8 position selector for 8L5-OCS