Devanco Canada - Get The Right Garage Door Opener‎ and Parts

.262_2"-RH

Torsion Spring .262 x 2" x 12ft RH Red/Yellow

Wire size: .262
Inside diameter: 2"
Length: 12 ft

.250_2"-RH

Torsion Spring .250 x 2" x 12ft RH Green

Wire size: .250
Inside diameter: 2"
Length: 12 ft

.243_2"-RH

Torsion Spring .243 x 2" x 12ft RH White/Yellow

Wire size: .243
Inside diameter: 2"
Length: 12 ft

.207_2"-RH

Torsion Spring .207 x 2" x 12ft RH Brown

Wire size: .207
Inside diameter: 2"
Length: 12 ft

.192_2"-RH

Torsion Spring .192 x 2" x 12ft RH Silver

Wire size: .192
Inside diameter: 2"
Length: 12 ft

.273_1-3/4"-RH

Torsion Spring .273 x 1-3/4" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 1-3/4"
Length: 12 ft

.234_1-3/4"-RH

Torsion Spring .234 x 1-3/4" x 12ft RH Blue/White

Wire size: .234
Inside diameter: 1-3/4"
Length: 12 ft

.243_1-3/4"-RH

Torsion Spring .243 x 1-3/4" x 12ft RH White/Yellow

Wire size: .243
Inside diameter: 1-3/4"
Length: 12 ft

25-60652

Truck Door Reefer Bottom Roller Bracket Assembly for Whiting Style Doors ** To Extent of Inventory

Steel construction Black E-coat finish
Consist of roller clamp wear plate stud plate and 5/16" lock nuts
Stainless steel studs and nuts
Cross ref: 5600

50307

Doorlec Cam Shaft Sub-Assembly EHJ ETH ETBH LJH

For models; EHJ ETBH and ETH
Assembly includes: Cam shaft (26140) Oilite (11801) x 2 Sprocket 41B12-5/8" (31118) Flange Bearing (28002) x 2 and nuts.

11801

Doorlec Oilite Cam

Fits 5/8" shaft fine thread.
Grooved 5/8" - 24 x 3/8"
Requires 2 per cam shaft

12563

Doorlec Upper Brake Shoe - Right ** To extent of inventory

Fits on all Doorlec operators equipped with brake shoes
Use with drum #12561

17315

Doorlec DC-3200T 32-Channel O/C/S Transmitter 313 MHz

Wall mount transmitter for 32-doors
Includes 9V battery
Old style

Programming instructions

MJ00013

Micanan Brake Shoe and Drum Assembly

Fits Micanan models: TB APTB JB HB HHD LH LJ & SD
Assembly includes: Both right & left brake shoe and the drum

RP-SW-LIMIT

Lynx Limit Switch for old model 455

Limit switch for old Lynx 455 with metal cover

CP-BRAKE-ASSBLY

Lynx Brake Shoe Assembly

Brake shoes for all Lynx operators
Assembly includes the shoes
release spring and bolt included

CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

Single limit with curved actuator lever
Switch attaches directly to the Logic 6000 board

CP-SW-AT

Lynx Single Limit Switch

PL-BO7-CRGSLIDE

Lynx Carriage Assembly (Nylon) *** No Longer Available

Proline / Lynx 455 Plus trolley slide assembly
For operators built from 2000 +

VBELT_4L310

Lynx VBelt 4L 31" (4L310)

Fits the old Lynx 455 garage door opener

H14GHALF

Half Hinge #1 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 1-5/8" wide with slotted holes

SEL2641R433-C2P

Erone 2-Relay Stand Alone Power Receiver 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (230Vac)
Self-learning memorization
Relays with Pulse step or delayed operating mode.
Power requirements: 12/24Vac/dc
Dimensions: 140 x 115 x 53mm (5.5 x 4.5 x 2in)

.......more details

Installation Manual Wireless System Chart

SEL2641R433-Z4

Erone 4-Relay Stand Alone Receiver 433MHz

Up to 85 transmitter keys
2 NO relay + 2 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output Relay number 4 can be setup to latched output
Can be used for O/S/C
Power requirements: 12/24Vac/dc

.......more details

Sell Sheet Brochure Wireless System Chart

SEL2641R433-IP

Erone 2-Relay Stand Alone Receiver Pulse/Latch or Delayed Relay Output 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
Standard pulse latched or timed relay output
Power requirements: 12/24Vac/dc
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)

.......more details

Instruction Manual Sell Sheet Wireless System Chart

14FT-TROLLEY-SET

LiftMaster 14ft Double Angle Rail Set for Comm. Trolley Ops 10-5814-P (2 pcs) *Actual length 203"*

Double Angle Rails for doors up to 14' high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
Actual Length 16' 11"

MOUNTSHAFT001A

Manaras Clutch Shaft Kit for MJH

Input / clutch shaft kit for MJH built after 1999

Drawing

VBELT_5L350

Manaras VBelt 5L 35" - repl. by B32

Used on MTH MTBH MSL models
Type B
Inside length 32 inches

VBELT_4L360

Manaras VBelt 4L 36" - repl. by A34

Used on MJ / MJH models
New belt type A replaces old 4L360. Part number VBELTA34

LIMIT006

Manaras Single Micro Limit Switch with Flat Lever

Fits old medium-duty Manaras operators such as MDJ
SPDT - Cherry

Limit Switch Chart

DRUM005

Manaras Steel Brake Drum 5/8" - replaces DRUM004

Replaces DRUM004
Brake drum with edges for current braking systems (2000 - current)
Used on all Manaras operators except Gear Head models.
Use with BRAKEPART019 (old part BRAKEPART017)

TIMER031

Manaras Timer 24/240V 1s-100h *** To Extent of Inventory

This timer-to-close can be added to any Commercial garage door opener.
Use with RELAY022 (8-pin base) if required.
Schneider Elect. part no. RE88867215

Adding a timer

DOORARM001

Manaras Door Lifting Arm Assembly

Complete door arm assembly for all Manaras trolley operators.

BRAKE011

Manaras Band Brake Assembly Kit

Does not include solenoid
Replacement brake kit for operators that are belt driven and have a brake. Works with OSH OTBH
Will not work with Gear-Head operators

Installation Manual

DISCONNECT001

Manaras Floor Level Disconnect Lever

877MAX

LiftMaster Sec+ 2.0 Keyless Entry with Universal compatibility (MAX) ***No Longer Available

Security+2.0™ rolling code technology assures a new code is sent every time the keypad is used
Temporary password option enables visitors or delivery and service personnel to enter the garage without giving them your personal code Completely wireless – powered by one 9-volt battery (included)
Weatherproof flip-up protective cover Backlit keypad makes numbers easy to see even in the dark
One-button-to-close feature makes it easier than ever to close your garage door (works with all LiftMaster® garage door openers manufactured since 2006)
Programs in 2 easy steps
Compatible with LiftMaster® Security+2.0™ garage door openers

.......more details

877MAX Manual

RADIO-RE101C

Manaras Factory Installed Mod plug-in receiver for Board 70 operators 390 MHz

Direct ECB plug-in receiver card (factory installed)
16 transmitters maximun per receiver.
Use part # RADIO-KIT004 when adding or replacing on-site.
This is now standard equipment on all Circuit board operators

RADIO-37

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 1 313 MHz ** To extent of Inventory

3-Channel O/C/S receiver controls one operator with MCT series transmitters.
Steel Nema 1 enclosure.
24 VAC input voltage.
2 N/O and one N/C relay
Commercial antenna Included (Radio029).
Replaced by RADIO-RE900A

.......more details

Programming Instructions - ECB Programming Instructions - CONT

RADIO-15

Manaras MRX-1000 1-Channel 24V Receiver with Commercial Antenna 313 MHz ** To extent of inventory

Controls one operator with MT series transmitters.
Operates on 24VAC.
A LED indicates that the unit has been activated.
Can be installed directly onto the control box of a Manaras operator.
Includes a commercial receiver antenna for increased range.
Will be replaced by RADIO-RE901A

.......more details

Installation Instructions

6589

WhitingBrush Side Seal assembly for insulated doors

Fits Coldsaver and Tempguard

2235.296

Whiting Coldsaver Bottom Panel 14-1/2" x xxx" with lock seal and retainer (Max 96")

Fits Coldsaver Roll-Up Doors
1-1/8" thick max 96" wide
Includes Lock and keeper

2234.396

Whiting Coldsaver Bottom Panel 13-1/2" x Max 96" with seal and retainer *** Cut to Length

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

2236.096

Whiting Coldsaver Intermediate Panel 12-1/2" x 96"

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

1336.3

Whiting Curbside Top Panel Closure Bracket for 8" radius track

9931MT

Allstar 1-btn Mini Transmitter 109391 318 MHz *** No Longer Available

Open/Close mini remote for 1 door
Compatible with Allstar and MVP receivers
Tab for key ring
Power: 12-volt battery
Codes: 19683 (set by nine trinary dipswitches)
RF frequency: 318 MHz

.......more details

Programming Instructions

9931T

Allstar 1-btn Transmitter 108787 318 MHz ***Replaced by P-9931T

Compatible with Allstar and MVP receivers
Visor mounting clip supplied
Power: 9-volt battery
Codes: 19683 (set by nine trinary dip switches)
RF frequency: 318 MHz
Dimensions: 2.25" W x 4.625" H x 1" D Order number: 190-108787

.......more details

Programming Instructions

831-RJ

Allstar 1-Door O/C/S Receiver in Oil Tight Case (JIC) 107478 318 MHz *** To extent of inventory

Three channels - three relay outputs
Oil-tight JIC ABS case
Terminal strip for wiring
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC

.......more details

Programming Instructions - Dip Switch Version Programming Instructions - Learn Button Version

ACT-34B

Linear 4-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz

Compatible with all Linear access receivers and controllers
Supplied with quick-disconnect key ring
Power: Two CR2016 batteries incl.
Codes: Factory block coded in MegaCode format
RF frequency: 318 MHz
Dimensions: 1.25" W x 2.25" H x .48" D

.......more details

Programming Instructions

MDR

Linear 1-Channel MegaCode Receiver 318 MHz *** Discontinued

Activates one device
Wire lead antenna
Mounting bracket supplied
Memory: storage for up to 10 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

DRQP

Linear 1-Channel Delta3 Gate Receiver 310 MHz *** No Longer Available

1-Channel Gate Receiver
High-sensitivity short-range radio receiver
Operates in conjunction with the 9-inch local antenna (supplied).
Designed for use with automatic gate operators or systems where a remote antenna is needed.
Same as: DNR00013P

Installation Manual

GRD

Linear 1-Channel Delta3 Gate Receiver 310 MHz (DNR00101) ***Discontinued

Auto voltage sensing - no jumpers to set
Single Form ”A” (normally open) relay rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna three feet of coaxial cable and bulkhead connector
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 256 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

733T

Allstar 3-btn 3-Door O/C/S Transmitter 107477 318 MHz *** Replaced by P-733T

Open/Close/Stop remote for 3 doors
Compatible with 3-channel Allstar and MVP receivers
Stationary mounting
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

535T

Allstar 3-btn 27-Door O/C/S Transmitter 107475 318 MHz ***Replaced by P-535T

Open/Close/Stop remote for 27 doors
Compatible with 3-channel Allstar and MVP receivers
Stationary mounting
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

MCT-11

Linear 1-btn MegaCode Transmitter 318 MHz

Activates one 318 MHz MegaCode receiver
Test/operate LED
Visor mounting clip supplied
Two CR2032 batteries included
Codes: 1000000+ (MegaCode format)
Dimensions: 3" W x 1.875" H x .625" D

.......more details

Programming Instructions

HAE00032

Linear 8ft Chain Assembly (HCT8)

HAR-11

EMX Wiring Harness 11-Pin for D-TEK-MVP 5111-1

Universal 11-pin harness

HAE00018

Linear Inner Slide Assembly - Chain (HCT)

For LSO50 LDO33 & LDO50

HAE00014

Linear Pulley and Bracket - Chain (HCT)

220205-02

Linear Complete Hardware Kit for LDO LSO LCO

Includes all the hardware needed to install the operator in its entirety.
Includes the rail hardware (door bracket and header bracket) and hardware for installing the safety beams.

HAE00002

Linear Safety Beam Set *** No Longer Available

Set includes: Sender and Receiver photocells wire and connectors
Safety beams will work with all Linear operators that currently have safety beams installed.

219109

Capacitor 1/3 HP 43-53 MFD 250V

For LDO33 only

HAE00040

Linear Control Logic/Receiver Board

Replaces HAE00039
Control board for LSO LDO LCO models

1336.8

Whiting Stainless Steel Roadside Top Closure Bracket for 8" radius

1336.6

Whiting Stainless Steel Roadside Top Closure Bracket for 10" radius

7953

Whiting Truck Door Hinge Gasket White

15.1

Whiting Truck Door Stainless Steel Center Hinge

1209.1

Whiting Stainless Steel Truck Door Side Hinge with Roller Cover

RV-200

2" Vinyl Insert for Brush Retainer per foot

Color: Black

1001-14-GREY

Commercial Side & Top Weather-Strip 14' Long - Grey

Aluminum retainer with grey dual-fin vinyl
Sold by full case quantity (10)

300BL

3" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1705

100BL

1" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1701

138BL

1-3/8" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1702

4004-8FT

Aluminum Retainer only for Heavy Brush 8' Long 45 degree

For angle application (45 degree)
For use with Heavy Brush

4010-6FT

Aluminum Retainer only for Light Brush 6' Long 180 degree

For angle application (180 degree)
For use with Light Brush or Vinyl Insert

4010-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree

For angle application (180 degree)
For use with Light Brush or Vinyl Insert

4007-16FT

Aluminum Retainer only for Light Brush***Actual Length 16'2" 90 degree

For angle application
For use with Light Brush or Vinyl Insert.
die # A-25060

4007-8FT

Aluminum Retainer only for Light Brush 90 degree

For angle application
For use with Light Brush or Vinyl Insert.

4003-12FT

Aluminum Retainer only for Light Brush 12' Long 90 and 180 degree

For angle application (90 degree & 180 degree).
For use with Light Brush or Vinyl Insert.

4002-6FT

45 Degree Aluminum Retainer for Light Brush 6' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

4001-12FT

Aluminum Retainer only for Light Brush 12' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1003-4"-YELLOW

Bottom U-Rubber 4" Yellow 200' Long

4" yellow vinyl insert 200ft spool.

1003-3"-YELLOW

Bottom U-Rubber 3" Yellow 200' Long

3" yellow vinyl insert 200ft spool.

1003-4"-200FT

Bottom U-Rubber 4" Black 200' Long

200ft spool of vinyl insert.

1008-1-3/8"

Bottom Nail-On for Wood Door Light Duty per foot

For 1-3/8" doors.
Color: Black

1009-1-3/8"

Bottom Nail-On for Wood Door Heavy Duty per foot

For 1-3/8" commercial doors.
For heavier applications than the 1009-1-3/4".
Provides a better cushion.
Color: Black

1019-1-3/8-12'

Rigid Vinyl Bottom Retainer Flat 12' Long

Black - for door thickness of 1-3/8"

1015-1-3/4-12'

Rigid Vinyl Bottom Retainer Raised Centre 12' Long

Black - for door thickness of 1-3/4"

1006-2-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-1-3/8-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

Black with flexible fin to touch door face.
For door thickness 1-3/8"

1006-1-3/8-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

Black with flexible fin to touch door face.
For door thickness 1-3/8"

1006-1-3/4-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

Black with flexible fin to touch door face.
For door thickness 1-3/4"

1006-1-1/2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1005-2-24'

Aluminum Bottom Retainer U-Shaped 24' Long***Actual Length 24'4"***

For door thickness 2"

1005-1-3/8-16'

Aluminum Bottom Retainer U-Shaped 16' Long

For door thickness 1-3/8"

1005-1-3/4-16'

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4" • DIE # ES18191

PATCH_6X12

Truck Door Aluminum Trailer Patch 6" x 12"

Adhesive back adheres to a wide variety of material easily covering holes or other blemishes on trailers.
Forms a shock resistant watertight seal.
Painted white