Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Transmitters
HRB-10

High Riser Bracket for 7" Above Dock or Higher 10"

  • High Riser 10" Riser Bracket for 7" Above Dock Door or Higher
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
HRB-8

High Riser Bracket for 7" Above Dock or Higher 8"

  • High Riser 8" Riser Bracket for 7" Above Dock Door or Higher
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
HRB-7

High Riser Bracket for 7" Above Dock or Higher 7"

  • High Riser 7" Riser Bracket for 7" Above Dock Door or Higher
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
SRB-4

Standard Riser Bracket 4" Above Dock

  • Standard 4" Riser Bracket for 6" Above Dock Door or Less
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
Specification Sheet
MK00594

Micanan Auxiliary Contact Block 100FA40

MK01065

Micanan Light Duty Resistor 2 OHM 25W c/w Wire Leads

CAPACITOR031R

Manaras Capacitor 324-389uf incl. Bleeder Resistor

  • Used for 1/2hp 120/230V 1ph MOTOR254
SPR50B54X11238

Sprocket 50B54 for a 1-1/2" Shaft 3/8" keyway

SPECPARTEL001

Manaras 3-btn Push-Button Control Station with Pilot Light Nema 4/12

  • 2 N/O contacts and 1 N/C contact for stop.
  • Surface mount.
M-30

Molded Rubber Bumper Black 30" L x 10" W 4" Projection 3-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
  • Bumper comes with 3 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
  • 30" L x 10" W 4" Projection
    • .......more details
DBE-20

Molded Rubber Bumper Black 20" L x 4 1/2" W 3" Projection 4-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
  • Bumper comes with 4 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
MM00447

Micanan Idler Wheel PRO-APTC

DBE-10

Molded Rubber Bumper Black 10" L x 4 1/2" W 3" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
  • Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
  • 10" L x 4 1/2" W 3" Projection
    • .......more details
M2818

Molded Rubber Bumper Black 18" L x 8" W 2" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles
  • Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
LB1212-14

Laminated Bumper Standard Black 12" L x 14" W 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB1210-36

Laminated Bumper Standard Black 10" x 36" 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
STATION080

Manaras 3-btn Push-Button Control Station with Key Lock-Out and Pilot Light Nema 4/12

  • 2 N/O contacts and 1 N/C contact for stop.
  • Surface mount.
  • Schneider Elect. part no. XALD04H7
LB1010-36

Laminated Bumper Standard Black 10" x 36" 10" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB1010-14

Laminated Bumper Standard Black 10" x 14" 10" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB912-12

Laminated Bumper Standard Black 12" x 12" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB910-24

Laminated Bumper Standard Black 10" x 24" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB812-36

Laminated Bumper Standard Black 12" x 36" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB810-36

Laminated Bumper Standard Black 10" x 36" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LLB420-22SF

Steel Faced Laminated Bumper Black 4" Projection L-Shaped 20" x 22" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
    • .......more details
TB412-36SF

Steel Faced Laminated Bumper Black 12" x 36" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB412-14SF

Steel Faced Laminated Bumper Black 12" x 14" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB406-24SF

Steel Faced Laminated Bumper Black 6" x 24" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TVB624-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 24" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
TVB636-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 36" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
TB610-36SF

Steel Faced Laminated Bumper Black 10" x 36" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-24SF

Steel Faced Laminated Bumper Black 10" x 24" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-18SF

Steel Faced Laminated Bumper Black 10" x 18" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-14SF

Steel Faced Laminated Bumper Black 10" x 14" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
8010

LiftMaster DC Chain / Cable Drive Garage Door Opener ***Discontinued***

  • Customized DC Motor with soft start/stop action.
  • Chain/cable square steel rail (SSR) system for efficient operation and standard performance.
  • Security+2.0 increases remote control range and reduces interference for consistent operation.
  • PosiLock® electronically protects against forced openings.
  • The Protector System® invisible light beam auto-reverses the door if there is an obstruction.
  • Comes with: Door Control Button (883LM) 1-Button Remote Control (891LM)
    • .......more details
LLB620-22

Laminated Bumper Black 6" Projection L-Shaped 20" x 22" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • This model has angles on both sides
    • .......more details
LVB636-11

Laminated Bumper Black 6" Projection Vertical Installation 36" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB630-11

Laminated Bumper Black 6" Projection Vertical Installation 30" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-36

Laminated Bumper Standard Black 12" x 36" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-24

Laminated Bumper Standard Black 12" x 24" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-18

Laminated Bumper Standard Black 12" x 18" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-36

Laminated Bumper Standard Black 10" x 36" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-18

Laminated Bumper Standard Black 10" x 18" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LLB420-22

Laminated Bumper Black 4" Projection L-Shaped 20" x 22" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • This model has angles on both sides
    • .......more details
LVB436-11

Laminated Bumper Black 4" Projection Vertical Installation 36" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB412-36

Laminated Bumper Standard Black 12" x 36" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB412-18

Laminated Bumper Standard Black 12" x 18" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB410-36

Laminated Bumper Standard Black 10" x 36" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
2376.182.29.870

Whiting Torsion assembly .182 wire size 29" spring length 87" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
.207-3-9-LHW

Mini Storage Spring .207 x 3" x 9" long Left Hand

44-60-280

Extension Spring 10' Door - 280 lbs Gold ** By Quote Only

  • Clipped ends
  • 44" long 60" stretch 280 lb load
MK-00546

Micanan Heater Probe in Reducer Mod. (24V 20W 3/8" NPT)

T008

Manaras Trolley Track 8ft for 1/2HP models *Actual length 126"*

  • For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)
34115

Doorlec Awning Pulley 194 x 1"

  • Used on model LDJ & LDJ-3
TOP-BK-PCG

Powdercoated Commercial Top Bracket Adjustable 1-Bolt Grey

  • Powdercoated Grey
  • 12 gauge roller carrier and base plate
  • Adjustment of 7/16" minimum to 3-1/2" maximum
  • Good for use with 3" hardware
HINGE-811-PCG

Powdercoated Hinge #8 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #8 - 0.87 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
HINGE-911-PCG

Powdercoated Hinge #9 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #9 - 0.89 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
HINGE-511-PCG

Powdercoated Hinge #5 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #5 - 0.78 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
HINGE-611-PCG

Powdercoated Hinge #6 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #6 - 0.81 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
HINGE-411-PCG

Powdercoated Hinge #4 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #4 - 0.74 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
HINGE-311-PCG

Powdercoated Hinge #3 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #3 - 0.73 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
HINGE-111-PCG

Powdercoated Hinge #1 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #1 - 0.61 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
K94-36934

LiftMaster Main Wiring Harness L5

WRW

Erone Wiegand Wireless Receiver 433MHz

  • 433 MHz radio frequency systems offer longer range (up to 250m (820ft) less interference jamming and excellent reliability.
  • KeeLoq® Rolling Code technology ensure ultra-secure transactions.
  • Output: Wiegand 26 bit
  • Power requirements: 12 or 24V (AC or DC)
  • Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)
  • Compatible with Centaur and any 26 bit Wiegand-capable systems
    • .......more details
Wireless System Chart
R1

Erone Radium 1-Channel Key Chain Transmitter 433MHz

  • Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
  • The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
  • A special algorithm allows to keep synchronized transmitter and receiver.
  • Range up to 250 m (820 ft)
  • Ergonomic rugged & durable
  • Battery: Two 3V lithium battery (CR2016)
    • .......more details
Wireless System Chart
LA500XL20W

LiftMaster Single Arm Solar Package for LA500 Gate Operator UL325 (Include (2x) SP10W12V Solar Panels (1x) XLSOLARCONTUL Control Box (1x) K94-37236 Solar Harness (1x) LMRRUL Photoeye (1x) K10-36183 Battery Tray (2x) A12330SGLPK Batt. (1x) LA500DC)

  • Kit Includes: LA500DC arm XL Solar control box (XLSOLARCONTU) which includes two 10WATT 12V Solar panels compatible with LA400 LA412 and LA500 Universal Solar harness (K94-37236) Monitored Retro Reflective Photos Eyes (LMRRU) Battery Tray (K10-36183) and two batteies (A12330SGLPK)
  • For dual gates order extra LA500DCS secondary arm
  • Updated unit complies with new UL325 code revised Jan 2016
  • Commercial Duty Cast Aluminum Housing with Heavy-Duty DC Motor powerful enough to perform in the most demanding applications. Soft start/stop operation extends operator and hardware life for heavy-duty gate use.
Manuel d'installationInstallation manualSell SheetBrochure
NUT015

Manaras Hex Nut 5/8-24 UNEF

Z9211-3

Stationary Cone Tool 3-3/4"

  • Easily dislodges the cone from the torsion spring
LA500-1PKG-XLMU

LiftMaster Residential / Light Comm. DC Swing Gate Op. Extra Large Control Box UL325 (Includes LA500CONTXLMUL (K74-39309-1) LA500DC (2x) 29-NP712 LMRRUL)

  • LA5001PKGXLMU replaces model LA5001PKGXLMDC
  • Updated unit complies with new UL325 code revised Jan 2016
  • System now requires monitored secondary entrapment devices unit will include LMRRU safety photo eye
  • Includes one LA500 arm XL control box receiver unit and photo eye and 2 -7amp batteries
  • Residential arm style swing gate operator with Extra Large control box and battery backup system
  • Battery Backup safeguards your property by providing up to 500 cycles* or up to 24 days* of standby power when the power is down.
    • .......more details
MH00004

Micanan Flange Bearing UCFL207-22 1-3/8" Bore

  • Used on PRO-GHC (BHC-80) for 2 3 5HP
  • 2 required per motor
MG00011

Micanan Ribbed Hex Nut 1/4" - 20 UNC

  • PRO-GHC operator parts
  • 12 required per operator
9-22-1

Offset Strut Plate

MD-00005

Sprocket 410B12 3/8" NO KW 2 SS 1/4"

MH00043

Micanan Flange Bearing 3/8" D **** Replced by MH00096

31343

Doorlec Sprocket 41B23 - 5/8" bore 2-Hole

PRO-X_MOD-2HP

Micanan Explosion-Proof Modification N-7/N-9 for 1.5HP-2HP

  • Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.
PRO-X_MOD-1/575V

Micanan Explosion-Proof Modification N-7/N-9 for 1HP 575V

  • Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.
PRO-X_MOD-1HP

Micanan Explosion-Proof Modification N-7/N-9 for 1/2HP - 1HP

  • Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.
K74-18346

LiftMaster Limit Shaft Kit

  • Compatible with LiftMaster® Model GH 5HP Commercial Door Operators
RADIO-EM932

Manaras 32-Door Dip Switch Transmitter O/C/S

  • 3-button transmitter
  • Operates up to 32 doors by using a combination of 2 rotary dials and dip switch keys
  • Open/Close/Stop function
  • LED Indicator
  • Soft touch push buttons including a bright red stop button for easy identification
  • Includes 4 mounting screws and anchors
    • .......more details
Programming instructionsManual
MG00041

Micanan Spring Clip 7/8" ID Sold Individually

  • 2 required per machine
RB-1

Rubber Button Cover Red for 3BLM PBS

  • Rubber button cover only
BB-1

Rubber Button Cover Black for 3BLM PBS

  • Rubber button cover only
108135.0002

Overhead Poly Type V- Belt for Old RG 32" *** by quote only

E/BLOP/246

Automatic Systems Option DBK Fan Heater 120V-400W for BL229

MX-00016

Micanan TEFC Motor Upgrade Modification

  • TEFC motor upgrade for 1-phase belt drive operators
BINS-WHITE

Utility Bin Heavy-Duty Stackable White *** To Extent of Inventory

  • Usable in virtually every environment both indoor and outdoor and they are made from Polypropylene which will not fade in the sun
  • Outside dimensions: 16.75" L x 10.75" W x 6.55" H
  • Inside dimensions: 12.15" L x 8.375" W x 6.5" H
  • Sold per bin
38123A

Genie Powerhead Mounting Flange

  • Mounting bracket connects the powerhead to the rail assembly.
  • A tongue on the flange fits into the bearing block assembly on the rail to keep it in place.
  • Fits TriloG PowerLift GPower and PowerMax Operators
MD00001

Micanan Bevel Gear 20 Tooth 3/4" ID

  • Comes with keyway and 2 set screws
  • Used on PRO-GHCW
TRACK-GUARD-60

Track Guard 60" Tall Safety Yellow With Base Sold as a Pair

  • Provides impact protection to vertical track
  • 45° angle flange adds strength protects from side impact.
  • 7-gauge steel construction powder coated safety yellow for high visibility.
  • 1/4” foot plate drilled with slotted holes for three 1/2” anchors.
  • Wall flange drilled with slotted holes for four 3/8” anchors
  • Includes: (right) and (left) sides
    • .......more details
BOARD060R

Manaras Replacement Circuit Board (No Monitoring)

  • Control board for BOARD065
40-3505

LiftMaster Gate Warning Sign Plastic English

TRACK-SET-2LH-138

2" Tracks Set 7'-0" Low Headroom Torsion 1-3/8" Door Clips for Wood Frame 12" Radius *** By quote only

VWS-34-BROWN

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Chocolate Brown

  • Pan head
  • S point
VWS-34-GOLD-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Gold Oak *** No Longer Avaialble - USE MEDIUM OAK

  • Pan head
VWS-34-BRONZE

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Bronze

  • Pan head
  • S point
VWS-34-CREAM

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Cream

  • Pan head
  • S point
  • Also known as Almond
ALUM-569

Aluminum 24" x 100' Spool Saddle Brown / Brun Fauve # 569

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 569
  • Reverse side is #431 Bright White
Colour chart
HSLG-221

Linear Commercial Slide Gate Operator 1/2 HP 230V 1 Ph - Heater not Included

  • Max gate size: 35 ft 1000 lbs
  • Max duty cycle: Continuous
  • Integral APeX Controller
  • Double V-belt to chain reduction
  • #40 roller chain
  • Emergency manual disconnect handle
    • .......more details
DM18VL-T/FORCE

Cable Drum Vertical Lift 18' D1100-216-1 Pair Torque Force

  • 18' Vertical Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x2" hardened cup point set screws installed with red heads.
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
  • Max. Door Height: 18'-1".
  • Rated Lift per Drum: 660 lbs.
  • Max. Cable Diameter: 3/16".
    • .......more details