Devanco Canada - Get The Right Garage Door Opener‎ and Parts

.187_2"-RH

Torsion Spring .187 x 2" x 12ft RH ***NLA

Wire size: .187
Inside diameter: 2"
Length: 12 ft

2G-LEFT

Rolling Steel 2" Curved Stamped Endlock Left Hand

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are at both ends of every slat.
Rivets included with endlock

115921-01

Wire Harness 66" long

Used on Rite-Hite dock leveler

111396.0002

Overhead Brake Kit Model RSX 3/4-1HP 3PH

41A5257-3

LiftMaster Hardware Kit *** No Longer Available

Hardware Replacement Kit. For use with various LiftMaster® Residential Garage Door Openers

XBA18

NICE Indicator Lights for L-BAR Arm 26.2ft

The Nice Apollo XBA18 is a 26.2 ft long line of indicator lights for the click fixture on the upper or lower side of the barrier arm of the L-Bar barrier gate openers.

MF00048

Micanan Round Head Slotted Bolt 1/4-20UNCx1-1/4" Full Thread

Used on various Micanan operators
2 required per operator

EHJX-311-3/4

Doorlec Industrial Jackshaft Op. Explosion Proof 3/4 HP 115V-1Ph

Equipped with: 3-btn control Adjustable Automatic Friction Clutch Emergency Chain Hoist and Heavy-Duty Solenoid Brake.
Explosion proof EEMAC 7/9

WHITING-PLATE-DR

Whiting Special Order Premium Plate Roll Up Door Price by Quote Only

PremiumPlate Roll-up door offers an alternative to plywood.
Polyethelene (PE) composite panels are bonded to prepainted high-tensile steel faces for a durable high impact surfaces.
Tongue and groove joint.
2 cable balancer with independent spring for each cable. Springs treated with rust preventative.
5 rows of hinges.
Patented roller-change hinge design.

.......more details

24856

Stanley Front Idler Kit for Chain/Cable Openers *** NLA

For Stanley Chain/Cable Openers Only
Not for Stanley Full Chain Openers
Replaces Part #920-0147

.177-2-L

Cut-to-Length Torsion Spring .177 x 2" Left Hand Wound Gold

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

7470.100

Whiting Side Seal for insulated doors 100" Long

Fits Coldsaver and Tempguard

SL585503UL

LiftMaster Industrial Slide Gate Op.1/2 HP 208/230/460V 3 Phase - Heater NOT Incl. ***NLA

High-Starting Torque continuous-duty motor (available in 1/2 1 and 1 1/2 HP)
Operator Duty Rating: 20 cycles per hour
Wormgear Reduction: 20:1 Wormgear Reducer
Adjustable Friction Clutch: helps to protect gate and operator from damage should the gate meet an obstruction
Chain: #50 nickel-plated (25ft. supplied)
Chassis: heavy-duty steel chassis and lockable powder-coated steel cover withstands extreme and harsh environments

.......more details

RDO-321-3/4

Doorlec RDO Rolling Curtain Op. w/ECB 3/4HP 230V 1PH

Additional charge for doors over 14' high

CP1L-L14DR-A

Programmable Omron Automate 14 E/S ** Price by Quote Only

Works on BCSI-HV 240 single phase

G220-1

Heddolf 1-btn Genie Compatible Remote 9 or 12-Dip Switch 390 MHz

Genie compatible transmitter

MK-00806

Micanan Heater Probe in Control / Limit Box 24V 20W 2" long Field Install

RESET005

Manaras Resettable Overload Fuse 8A 1 Phase

108207

Fasteners Self Drill & Tap Tek Screw 5/16-12 x 1" 100/Bag

Indented Hex Washer Head
7/16" Head
Max RPM = 2000

41D0277-2

LiftMaster Transformer WiFi Non-Battery Backup

For Wi-Fi models without BBU garage door openers; manufactured after 2011
Same as #204D0277-2

41D9204

LiftMaster Wire Harness LED

Same as 041D9204

LMLEVPACK-SN

LiftMaster Yale Smart Keypad Lever Satin Nickel Finish Includes 821LMC ***No Longer Available

Smartphone Control – Pair with included Lock Wi-Fi® Bridge to securely lock unlock and view door activity in the myQ® App.
Illuminated Keypad: Easily enter your code using the backlit keypad.
Brings Keyless entry to doors with no deadbolt
Key Free – No key hole means no lock picking or keys to lose.
9V Battery Back-Up – Never worry about getting locked out due to dead batteries.
Works with Key by Amazon to provide a seamless delivery experience.

.......more details

Programming instructions Sell sheet

26665

Doorlec Drive Shaft 1" x 19" Stress-Proof SGP

BRAKEPART020

Manaras Brake Shoe Assembly Kit (SHOE021/022)

BPE-50

EMX Industries Battery Powered Through-Beam Photocells EMX-1500-1

Thru beam configuration
90° adjustment left or right
The transmitter and receiver use 12-24 VDC/AC but the BPE-50 can also be powered by two 3.6-volt lithium batteries (Batteries Included)
50 ft. operating range
Size: 4.4" (112mm) x 2.05" (52mm) x 1.3" (33mm)

MEFF-PAIR

Miller Edge Funny Flaps for MC22 Sold as a Pair

Funny Flaps for use with the MC22 Sensing Edge and are a great fit for an application where extra sensitivity is needed
They're necessary to fill the gap between the edge and guide within the sensing edge system and their flexible durable construction offers an alternative to more rigid standard sensing edge setups.

LOTBINIERE-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings positioned to create the Lotbiniere design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

PORT-ROYAL-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings positioned to create the Port Royal design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

GX-138-S-R12

Garex Ready to Install Door Special Order

R12 Insulation - Woodgrain with 2 wide shadow lines at the top and bottom of each panel - Common commercial profile - Available in steel white and black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements

URBAN-R16

Garex Ready to Install Door Special Order

R16 Insulation - Woodgrain with 1 narrow shadow line at the top and bottom of each panel - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

2807.177.230

Whiting Spring Assby .177 x 2-3/16 x 23" Curbside

Replacement torsion spring with cones
Specs: .177 x 2-3/16" x 23" Long
For Roadside order part # 2806.177.230

MIRF-T2

Miller Edge Patriot 2 Photo Eye Non-Monitored 30ft Non-Contact

Attaches directly to a Sectional door.
The photo eyes travel below the door during the closing cycle.
Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
The Patriot2 non-contact system consists of thru beam photo optics.
Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.

.......more details

IRB-SH-SET

EMX Industries Steel Protective Hoods Only Grey Powder Coat Pair ** To Extent of Inventory

Includes 2 hoods
Powder-coated steel construction
Compatible with EMX IRB-MON EMX IRB-4X safety photo beam sensors
Each hood fits easily over gate/garage door opener sensor

CA-151-412

Continuous Angle 1-1/2" x 4-1/2" x 151.5" L Sold per Piece

12-ga angle

XBA3/U

NICE MBAR Replacement Logic Board

STRUT-3-30'

Door Strut 3" Hemmed 30ft Long

Reinforcement bar 3"

K75-19978-L

LiftMaster Frame Plate Kit Left Hand Disconnect

For use with various LiftMaster® Hoist and Jackshaft Commercial Door Operators

P-0128/LH

Autogate Retro Bracket Left Handed System

This is needed to change over to their current motor

26117

Doorlec Limit Cam Retainer Plate with Fasteners

Fits Most Doorlec Commercial operators except Explosion-Proof Operators
Will not fit on waterproof operators with small electrical enclosure built before 1999

HSLG-123

Linear Commercial Slide Gate Operator 1 HP 230V 3 Ph - Heater not Included

Max duty cycle: Continuous
Integral APeX Controller
Double V-belt to chain reduction
#40 roller chain
Emergency manual disconnect handle
Powder coat finish

.......more details

LM56A

LiftMaster Magnetic Proximity Reed Switch

Normally Open magnetic sealed reed switch; proximity switch
Used for overhead door contacts.

Installation Manual

RADIO-RE901B

Manaras Open/Stop/Close 24V receiver Nema 4/12 313 MHz

Wall mount
Fixed code / Dip switch technology
Commercial reciever( Learn button) 1-door
16 Fixed codes / Receiver
Nema 4/12
Approx 100' range

.......more details

PL-A21-RPM-WHEEL

Lynx RPM Reader Wheel

MGR20-Y-2U-PER-FT

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet Sold Per Foot

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
Non-monitored edge
Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)

CHAIN059

Manaras #41 chain 48 Pitch (24" long)

Includes 1 chain link

3709-4220

Strap 2" w/Ratchet & Double J-Hooks 20ft Long

Polyester strap 2" wide
Work load limit 3335 LBS

MOTOR256

Manaras Electric Motor 1 HP 120/240V 1PH

Continous-duty base mount ODP 60Hz

29138

Doorlec Transformer 208V pr 120V sec 50VA

208V prImary 120V secondary 50VA

RELAY008

Manaras Relay AB 700-HA33A24 11 Pin TP

Allen Bradley

Q200

LiftMaster Chain Coupling Release K07-50215

For Liftmaster trolley operator HCT

1371

Whiting Complete Bottom Bracket with Cover

7001-9-ANODIZED

Commercial Side & Top Weather-Strip 9' Long - Anodized 7001-AB

Anodized galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

Q118

LiftMaster Access Door Keys Qty 2 K80-50295 for HCTDC CSL CSW RSW

Also Known as K80-50295

515.06000R01

NICE Octagonal adaptor 60x(0.6/1) Wheel + Crown

CP100C

Coupler Specialty Coated 1" Bore

Coated with 1000 plus hr salt spray rated finish
1" Bore with 1/4" keyway
Malleable iron for high strength and resistance to shock loading
Coupler halves separates and is adjustable
4-(3/8"-16 x 1" square head set screws installed
Rust inhibitor coating

.......more details

0/7140/499

Automatic Systems Frequency Drive ATV 12 0.37KW 120V

Frequency drive for AS1620
Only available for G2

7207

Whiting Balancer Bracket Center for Whiting Roll-Up Doors For #7176 Balancer

Steel construction
Plain finish
Whiting original

BPPB17512

Devanco Bottom PVC Moulding White for 1 3/4" Door U shaped 144"(12')

ERM40600H00

NICE Era MH Tubular Motor 40Nm 14rpm 120/60 12'

There must be at least 0.4 m between the driven parts and any xed elements
If the cable is damaged the appliance must be scrapped. The power cable cannot be replaced

SHAFT120

Manaras Input Shaft for OSHW

41C2760

LiftMaster Chain and Cable Kit 8'

Also known as: 1C2760 41C2760 41C2760-1
One piece 8 ft. chain and cable replacement kit installed on 8ft garage door

H8NA12

Richards-Wilcox Hinge 8NA x 12 Gauge Roller Bracket

Galvanized 12 gauge hinge

H7NA12

Richards-Wilcox Hinge 7NA x 12 Gauge Roller Bracket

Galvanized 12 gauge hinge

ME120-BLK-2WIRE-L

Miller Edge Black 2-Wire NM Left Hand Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

60-2730

AB 42GRU-9002 Nema 4 Retro-Reflective Photocell Exterior *** Obsolete

Voltage: 110VAC
Sensing Distance: 30 Feet
Comes with Bracket and Reflector
NEMA 3 4 4X 6P 12 & 13
Allen Bradley

830

Fasteners Wood Screw #8 x 3" Flat Head Course Thread Zinc Plated 1000/Box

Drive style: Robertson / Square head
Plain thread

MTR1

Linear 1-Channel Visor Transmitter 318MHz *** To Extent of Inventory

Activates one MegaCode receiver
Test/operate LED
Visor mounting clip supplied
Visor clip mounts vertical or horizontal
Power: One 2032 battery
Codes: 1000000+ (MegaCode format)

.......more details

Programming instructions Instructions de programmation

RSW12UL

LiftMaster Res. / Light Comm. DC Swing Gate Operator 12VDC Heater Not Incl.

Includes safety device LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflect
Features battery backup that provides up to 147 cycles or 63 days of standby power
Smooth Start/Stop Operation and mid-travel reversal extend operator and hardware life.
Heavy-Duty Commercial Gear-Driven Transmission provides unsurpassed reliability.
myQ® Technology enables you to securely control and monitor your gate operator from anywhere
Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.

.......more details

Sell sheet Brochure

G3243

GDI Battery Backup Option G3243

BBU option if AC power is lost

BK149/PR-BLACK

Residential Bottom Corner Bracket RBB-75 Black Powder Coated sold as a pair

For use with 2" straight track
Individually wrapped

SPRING-GALV-144

Torsion Spring Galvanized Wire Full Length Custom Order

Custom galvanized wire spring ordered to suit

22010

Doorlec 1-22mm Cylinder Complete with Normally Open Contact Spring Return Includes 2 keys

MOUNTSHAFT015

Manaras Hoist Shaft Kit for OGH

LPWKP-G

Linear MegaCode Wireless Keypad 318 MHz Cool Grey **** Replaced by NMTK

Activates multiple MegaCode receivers
User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
Programming is easy via the keypad; MegaCode receiver auto-learns PIN
Backlit keys for easy viewing
Wall mounting hardware (2 screws and anchors) supplied
Power: Three AAA batteries

.......more details

GAL.262-258-144L

delete

VMD202-R

EMX Remote Tuning and Adjustment Control Device

If you wish to “tune” the sensitivity the accessory VMD202-R will need to be plugged temporarily into the connector.
The VMD202-R may then be removed or left in place as desired.

VMD202-50

EMX Vehicle Motion Detector Probe with 50ft Lead Wire

The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
The probe and its electronics are housed in a slim design that is buried next to a driveway.
The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
Probe assembly and wire are water tight and direct burial compatible
Harness is pre-wired onto lead wire for easy installation
Settings are placed in a non-volatile memory in case of power failure

.......more details

CAP378

Capacitor 110/125VAC 378-454MFD

378-454 mF 125 VAC 50/60 Hz
Used on 1/2 HP LiftMaster operators

MGH-6435-ECB-RH

Manaras 1.5 HP 480V 3P Jackshaft with Elect. Circuit Board Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

CP-BRK-CAM-MCJ

Lynx Retaining Plate & Hardware for MCJH

41A7618

LiftMaster End Panel with Battery Cover and Light Socket 8550W

2806.162.18

Whiting .162 x 2-3/16 x 18" Roadside with Cones

M15A

Safety Inertia Brake 2" Bore 13727 Torque PCM15AP

Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
Fully resettable and reusable after lockout ocurrs.
Commonly paired with commercial safety bottom brackets in sectional door applications.
Fits 2" shaft
Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.

.......more details

Manual Technical data Sell sheet

P-75

End Plug for 3/4" ID Rubber Hose

Sold per plug

CP-SH-58-1012

Lynx Center Shaft Only for MCJH 5/8" x 10-1/2"

XBA13

NICE Rubber Impact Red Protection Strip 9M/Pkg

UTIL025

Utility Limit Switch Telemecanique

Installation Manual

M7A

Safety Inertia Brake 1-1/2" Bore 6266 Torque

Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
Ideal for commercial and industrial use; specifically with rolling shutters and rolling doors.
Normal Torque: 6266 lbf.in
Locking Torque: 29199 lbf.in

Reference manual Technical data Sell sheet

50430-KEY

Doorlec PBS 2-Btn O/C and Key Switch On/Off Nema 4/12

Open / Close with On / Off Key Switch Nema 4/12
Green - Open Black - Close

GATE-SP-ORDER

Special Order Gate

Made to customers specific requirements

RELAY026

Manaras Relay DPDT 120VAC

HW-SP-BL

Lynx Disconnect Spring

HW0427-LH

SteelCraft Commercial Bottom Bracket Left Hand Only

Left Hand bracket only
Can be used for both 2" and 3" tracks
To be used on door tracks that are installed wide enough to accomodate the side cable pulley
Door hardware must start with a #1 hinge on the bottom panel for both 2" and 3" hardware
Adjustable cable can level door from the ground
Heavy gauge steel construction

.......more details