Devanco Canada - Get The Right Garage Door Opener‎ and Parts

27-20303

Truck Door Cable Drum and Bearing Roadside (LH) for Whiting Roll-Up Doors

Black nylon drum with bearing
Cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines Left or Right drum (Left = Red)
Cross Reference: 2547

HD3076

Lift Handle Roll Grip Round Zinc Plated 5-1/2"-5-3/4"

Measures 7" from end to end
Measures 5.5" from eyelet to eyelet

26-14322

Truck Door Bottom Panel with Seal (12" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood Primer finish
Comes only with bottom retainer and seal (installed)

25E10311

Truck Door Heavy- Duty Lift Handle Black E-coat finish

Wide grip design
Black E-coat finish
Works with both Whiting and Todco Doors

25E10051

Truck Door Center Hinge Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Cross Reference: W #15 T #70159
Box quantity: 50

25E10002

Truck Door End Hinge & Roller Cover Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Removable cover allows roller change without hinge removal
Cross Reference: W #1209 T #70162
Box quantity: 50

Z9997

Hand Chain 25' for Manual Chain Hoists

Not SAE rated.
Designed for approx. 35 lbs

R5999

Shaft Collar 1" with 1 Set Screw

Set Screw: 5/16 x 18

R5998

Shaft Collar 1-1/4" OD 2" 2 Set Screws 3/8-16

With 2 set screws

DM18-125

Cable Drum Vertical Lift 18' 1100-18 (1-1/4") Pair

18' Vertical Lift aluminum die cast alloy cable drums for 1-1/4" shaft.
3/8"-16 x2" hardened cup point set screws installed with red heads.
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 18'-1".
Rated Lift per Drum: 660 lbs.
Max. Cable Diameter: 3/16".

.......more details

DM413

Cable Drum Standard Lift 12' 400-12 Pair

12 ft Standard lift cable drum. Aluminum die cast alloy.
Max. door height: 12'-1".
Rated lift per drum: 375 lbs.
Max. cable diameter: 5/32".
Mounting: 1" tube or solid shaft with 1/4" keyway.
Cross references: D400-144 DNS 4-13 OMI 2100. 3/8"-16 x 2" hardened cup point set screws installed with red heads. Color coded (red=LH black=RH)

.......more details

SF600U

Spring Fitting 6" Pair Universal Thread Stationary + Winding for 1" Shaft

Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
Pair includes: (1) winding & (1) stationary.
Not single thread.
Winding bar hole 5/8"

CBB125

Stop & Sleeve 1/4" 100 pair

Includes 100 stops and 100 oval sleeves

H11G10

Hinge #10 x 11 gauge

11 gauge # 10 hinge - 0.92 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

H11G06

Hinge #6 x 11 gauge

11 gauge #6 hinge - 0.79 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

H11G04

Hinge #4 x 11 gauge

11 gauge # 4 hinge - 0.72 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

EP2987

Exhaust Port 6" with latch long barrel ** Discontinued

6" inside diameter 2" sleeve with latch.
Includes fasteners & gaskets.

EP2982

Exhaust Port 4" with latch short barrel ** To Extent of Inventory

4" inside diameter 1/4" sleeve with latch.
Includes fasteners & gaskets.
Polished aluminum finish.

CB3160500

Cable 3/16" 7x19 500' Galvanized

Galvanized cable 3/16" 7x19 500ft spool.
Cable break strength: 4200 lbs

Comparison charts

CB18B0500

Cable 1/8" 7x19 500' Galvanized

Galvanized Cable 1/8" 7x19 500ft spool.
Cable break strength: 2000 lbs

Comparison charts

RN1127

Roller 2" Nylon 7" stem 11 ball White

White Nylon Roller Wheel Diameter: 2"
Working Length: 6.31" Overall Length: 7.25"
Box qty: 150 Box weight: 65.5 lbs (2-7-11 White Nylon)

HD3080

Step Lift Plate Curled

Step Plate/Lift Handle

25-10276

Truck Door Universal Center Hinge Flush Mount **To extent of inventory

Steel construction Zinc plated finish
Eliminates routing of panels for easier installation
Cross Reference: H-325709

41A2817

LiftMaster Drive Gear and Worm Kit (No Sprocket)

Also known as: 081B0045 062216 081C0179 81B45 2612159

Installation Manual Manuel d'Installation

41A5034

LiftMaster Snappy Beam Sensors ** DISCONTINUED USE 041-0136

Will work on all LiftMaster residential openers equipped with safety beams
For newer models 1999-current will fit on existing brackets
For older models 1993-1999 new brackets #41A5266-1 are required or use old style safety beams #41A4373A
New Gen ( 2021+) operators will have new snappy beam sensors part number 041-0136
Not compatible with the New Gen (2021+) 041-0155 snappy beam brackets

25-10113**DISC

Truck Door 2" Steel Roller Long Stem for Whiting Roll-Up Doors Use Part # 94-61180-33-84

Unplated shaft 10 roller ball design
Shaft Length: 6.5" Overall Length: 7.5"
Long stem roller has a staked collar design versus machined collar on others.

25-01439

Truck Door 1/8" Stainless 5/16" Eye 115" for Roll-Up Doors Sold per Pair

Works with both Whiting and Todco doors
Aluminum eye ends are used on 5/16" eye cables
Cable size: 1/8"

D-TEK-LM

EMX Industries Plug-in Loop Detector for Liftmaster operators ** To extent of inventory

Plug-in Loop detector for SL575 SL585 SL595 BG770 BG 79024VAC
Works with most LiftMaster gate operators
Won't work with Elite Series Mega Arm Slide & Swing
Simply plug it into the harness already in the operator
Loop lead-in wires connect to operator terminal strip
Gold plated control contacts

.......more details

Installation Manual Sell Sheet

CUSTOM4X6PO

Devanco Loop 4'x6' rigid-pvc pave-over

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

6X10SC50

Devanco Loop 6' x 10' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

4X10SC50

Devanco Loop 4' x 10' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

4X6SC50

Devanco Loop 4' x 6' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

4X10PO50

Devanco Loop 4' x 10' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

4X6PO50

Devanco Loop 4' x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

4X8PO50

Devanco Loop 4' x 8' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

GTL-PLUS

Devanco Door Lube 454g Aerosol

Ozone Friendly Door Lubricant with anti-wear and extreme pressure additives.
Non-Drip formula provides long lasting lubrication and protection where metal to metal friction occurs. •Ideal for use on door tracks hinges springs rollers chains cables gears and more.
Available for private label
12 cans per case

Safety data sheet Fiche de données de sécurité

1104-9FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 9' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.

SHAFT002

Manaras Hand Crank Shaft 5/8" Sold per Foot Max. Length 12ft

Must specify exact length required when ordering

.363-3-3/4-RH-C

Torsion Spring .363 x 3-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .363 ID: 3-3/4" Length: 12 ft

PRO-GT-10023-U

Micanan 1HP 230V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

LVB436-11

Laminated Bumper Black 4" Projection Vertical Installation 36" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

Z9220

Pocket Style Res / Com Combo Spring Gauge

Includes wire sizes .1875 thru .5
Double saw-tooth leaves for easy wire measuring
Stainless steel
Includes belt sheath

.273-2-LH-C

Torsion Spring .273 x 2" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .273 ID: 2" Length: 12 ft

LDJ-CAP-48MFD

Doorlec Run Capacitor for LDJ RCR50-370

370VAC/B 50 uf 50/60 Hz
CSC run capacitor

ETOOL

LiftMaster Edge Cutting Tool***NLA

41A3589-3

LiftMaster 7ft Belt Assembly for Models '93-2000

Full 7' belt assembly for models 1270 1280 and 1280R

OPJ-6113-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 120V 1 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

10-1036-4

Whiting 2" Nylon Roller 5" Stainless Steel Shaft for Truck Doors

A Whiting original part
Stainless steel bearings stainless steel shaft

15-41B32LGH

Sprocket 32 Teeth 1" Bore 1/4" Keyway

Sprocket for #41 chain

COLLAR004

Manaras Collar 5/8"

PREM-SEL-MX-R16

Garex Ready to Install Door Special Order Premium Select MX R16

R16 Insulation - Mix of short and long panels - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - 7' to 9' wide doors will have 1 short and 1 long embossment - 10' to 11' wide doors will have 2 short and 1 long embossment - 12' to 18' wide doors will have 2 short and 2 long embossments - Composite end blocks eliminates corrosion and wood deterioation

510.3021.00

Whiting Stainless Steel Exterior Hardware Package with #77 Lock for Dry Freight Door

Optional package when a door is ordered. Includes SS rivets and installation.

1006-1-1/2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

BK020/PR-BOLT

Commercial 2" Safety Bottom Bracket with Bolt Sold as a Pair

Maximum cable diameter: 3/16"
Maximum door weight: 1300 lbs Zinc
Plated Steel
Sold as a pair

Installation manual

OPH-6212-ECB

Manaras Opera-H 1/2HP 240V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

Installation Manual Sell Sheet

LD-11B

EMX Base Socket 11-Pin DIN Rail Mountable Black Block Style

For use with D-TEK detectors
Special Order Only
Narrow profile

CP-PU-DRV-78-8

Lynx Drive Pulley 7/8" x 8" 4L for Jackshaft Ops

41B5669

LiftMaster Belt Clip and Link Kit

Used for splicing "New-Syle" belt

GDI-LG920

GDI Jackshaft & Trolley JDMG-LG-A830 Nema 4 UL325 Photo Eyes Extra

Low Headroom at 4-3/4" (Trolley)
Dimensions: 11.35" x 4.3" x 4.3"
Motor type: Brushless DC
Max cyles: Open/Cose per day = 3200
One operator can handle all AC voltages - Single phase and three phase
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain

.......more details

2376.177_25.900

Whiting Torsion assembly .177 wire size 25" spring length 90" shaft

1004-134-24'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 24 ft***Actual Length 24'4"****

For door thickness 1-3/4"
DIE # ES19244

RS1029

Roller 2" Steel 9" stem- WL 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 9.5" Overall Length: 10.5"
Box qty: 100 Box weight: 60 lbs (2-9-10 WL steel)

STAR450-315

LiftMaster Commercial Access Control Receiver 315MHz *** Discontinued

Rapid learn feature programs multiple transmitters in just seconds
Ideal for gated communities parking lotsand garages.
Works on a tri-band frequency

Programming Instructions Sell sheet

CABLE_532SS5000

Cable 5/32" 7x19 5000' Stainless Steel ** Price on request

GALV-250-334-R

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-334-INSTALLED

99000568-PER-FT

Amarr Bottom U-Seal 3.5" Gray Vinyl 1/4" T Sold per Foot

1/4" T width
Used on Strat 3000 Herit 3000 and Commercial (exceot 1350 & 2700)

26-40402

Truck Door Reefer Side Seal 98" Long for Whiting Coldsaver

Co-extruded using PVC backing with flexible PVC seal against the door.
Cross Reference: W #7470

MU22-2WIRE-LH-Y

Miller Edge MU22 2-Wire Left Hand Yellow - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

.343_6"-LH

Torsion Spring .343 x 6" x 12ft LH Blue/Red

Wire size: .343
Inside diameter: 6"
Length: 12 ft

K72-16421

LiftMaster Limit Shaft Assembly LGO****Discontinued and no Longer available

Assembly includes: Limit shaft Limit nut Sprocket Roll pin Bushing E-Ring and Chain.

Installation Manual

MU22-2WIRE-LH-B

Miller Edge MU22 2-Wire Left Hand Black - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

CP-BRAKE-ASSBLY

Lynx Brake Shoe Assembly

Brake shoes for all Lynx operators
Assembly includes the shoes
release spring and bolt included

.393_3-3/4"-RH

Torsion Spring .393 x 3-3/4" x 12ft RH Orange

Wire size: .393
Inside diameter: 3-3/4"
Length: 12 ft

K74-31243

LiftMaster Kit SVC MOV

1006-1-1/2-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

OPJ-6233-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 208V 3 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

PRO-J-10081-U-LH

Micanan 1HP 208V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

2806.148.180

Whiting .148 x 2-3/16 x 18" Roadside with Cones

1104-7FT-SAND

Residential Side & Top PVC Weather-Strip with cap 7' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

OGH-6236-ECB

Manaras 2 HP 208V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

K21-38158

LiftMaster Current Sense Harness Kit 3PH L5

This is a Current Sense Harness (230/460/575V) Replacement Kit.
Compatible with various LiftMaster® 3 Phase Logic 5.0 Commercial Door Operators; manufactured after February 2016.
Complete replacement kit includes: (2) current sense harnesses of different lengths to accommodate all models.
Models manufactured before February 2016 DO NOT feature current sense technology.
We highly recommend replacing the existing boards with an updated Logic 5.0 system that utilizes current sense technology
Refer to the following replacement boards for compatible upgrades: K001D8395 1PH/3PH Logic Board for all L5 models K001D8397 3PH/L5 Power Board 230/460V

.......more details

1007-1-5/8-10

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 10'1"

For door thickness of 1-5/8" to 1-3/4"

1005-1-3/4-14

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4"

1104-7FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 7' Long - White (W)

White rigid vinyl retainer with white flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

MD-00201

Sprocket 50B40 x 1-1/2" 3/8" KW 2SS 5/16"

.262_1-3/4"-RH

Torsion Spring .262 x 1-3/4" x 12ft RH Red/Yellow

Wire size: .262
Inside diameter: 1-3/4"
Length: 12 ft

93-00240

Truck Door Spacer Washer for Rollers

Used with Rollers to help adjust Roll up doors
Cross Reference: T #80020 W #6 #66 140100

50680

Doorlec Clutch Assembly for LJH

K72-13912

LiftMaster Clutch Shaft Kit T GH

108D79

LiftMaster Light Lens 108D0079M

Replaces 108D68 and 108D68-1

.375-6-LH-C

Torsion Spring .375 x 6" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .375 ID: 6" Length: 12 ft

1104-18FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 18' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Full case quantity only (12).

ME123-M-YEL-RH

Miller Edge Yellow RH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

31111

Doorlec Sprocket 50B70 2" Bore KW/SS 1/2T

DM28VL-125

Cable Drum Vertical Lift 28' 1350-28 (1-1/4") Pair

28' Vertical Lift aluminum die cast alloy for 1-1/4" shaft.
3/8"-16 x2" hardened cup point set screws installed with red heads. -
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 28'-1".
Rated Lift per Drum: 1100 lbs.
Max. Cable Diameter: 1/4".

.......more details

10TD900INDHH4

BEA 4-Button Digital Transmitter Nema 4 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
IP65
Operating temperature: -10 to 55C
Controls one 10RD900 receiver