Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Transmitters
02-711

LiftMaster Nema 7/9 Ceiling Switch Pull Control

  • Single Pull Switch Control
  • Hazardous Area Overhead Mt. (NEMA 7/9)
  • Die cast hazardous area enclosure
  • May be used in two different ways; as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring). In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
  • Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
  • WARNING: When used on most industrial operators this control will not stop the door. Use another control that has a STOP button in conjunction with this control.
MA031

LiftMaster Adapter Collars 2/Pkg

  • For use with Mega-Arm padded arm
SCRUBS-PAIL

Scrubs Hand Cleaning Towels 72 Towels per Pail*** Special Order Sold by Quote Only

  • The citrus-based formula and textured towel combination works to loosen dissolve and absorb the toughest materials
  • Each pail contains 72 towles
  • 6 pails per case
G65-19084

LiftMaster Thermostat Control Heater Fin Type for 208V-460V Gate Operators ** Discontinued

  • Heater used in BG type gate operators
Installation Manual
7001-7-BLACK

Commercial Side & Top Weather-Strip 7' Long - Black 7001-BB (Code B)

  • Black galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
784

Fasteners Serrated Flange Nut 1/4-20 1000/Box

  • Serrated flange face to provide locking
8X118

Fasteners Wood Screws 1000/Box

  • Ideal for residential weatherstrip
RBH501L5-LH

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 ***Use RBH751L5-RH***

  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0â„¢ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Brake standard on all RBH operators
  • #48 chain #50 output sprocket chain
  • Comes with CPS-U photoeyes and 02-103 O/C/S push button
    • .......more details
Installation ManualManuel d'InstallationSell sheet
MOD081

Manaras Damp Environment Oil and Dust Tight Modification replaces N1 with Monitored N4 Eyes

  • For applications where dust water spray oil leaks or any other type of condensation is present.
  • Includes TEFC motor seal-tight conduit and connectors NEMA 4/12 O/C/S push-button station NEMA 4/12 control box
  • If operator is monitored this modification will upgrade the photoeyes to NEMA4 as well
MV00292

Micanan Banner Photocell with Reflector

AW14-RF-K10

Miller Edge Wireless Air Wave Switch Transmitter/Receiver Kit

  • AW14-RF is the AW14 air wave switch with a transmitter embedded within the switch enclosure and the receiver wires into the operator.
  • There is no need to hardwire coil cords or retracting reels which saves installation time and improves visual aesthetics.
  • The AW-14-RF-K10 switch kit includes a MRF-01 receiver which is wired to the motor controls.
  • Battery is included # CR2032
Installation ManualSell Sheet
SSZP13-1

Solid Shaft 1" Keyed Zinc Plated 13'-1"

SSZP11-1

Solid Shaft 1" Keyed Zinc Plated 11'-1" ** to extent of inventory

SSZP7-6

Solid Shaft 1" Keyed Zinc Plated 7'-6"

CAR2U-RPTR

LiftMaster Lear CAR2U Repeater *** No Longer Available

  • · The Lear Car2U® repeater kit allows compatibility between new Chamberlain® Sears Craftsman® or LiftMaster® Garage Door Openers and the Car2U system in your vehicle. · The Car2U system is a garage door opener integrated into your vehicle. · The Lear Car2U kit contains a transmitter and a detailed instruction manual.
Programming Instructions
MT22-YELLOW-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

  • €¢Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
Installation ManualWorksheetSell Sheet
1116633901.S

Overhead 1-btn Transmitter 390 MHz

  • Replaces the 1091303901.S
  • 1 channel transmitter opens and closes 1 door
  • Codes using 9 dip switches with 3 positions
  • Battery (ALK12V) and visor clip included
  • Compatible with all Overhead Door 390 MHz frequency garage door openers that were manufactured before 1996.
  • This was a common remote on the 556C
    • .......more details
Programming InstructionsInstructions de programmation
CH755L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 575 VAC 3 Ph Logic 5 Right Hand ***Replaced by CRBH755L5-RH

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
H755L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 575 VAC 3 Ph Logic 5 Left Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
H505L5-LH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 575 VAC 3 Ph Logic 5 Left Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
H505L5-RH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 575 VAC 3 Ph Logic 5 Right Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
K001C8103-1

LiftMaster L5 Antenna

178B34

LiftMaster Straight Door Arm

  • Will work with most residential garage door openers
  • Also known as: 012385041783 178B33 178B34 4178B0034B
7001-9-SANDSTNE

Commercial Side & Top Weather-Strip 9' Long - Sandstone (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (20)
MP-00001

Micanan Timer to Close 24V Modification

  • 3-button o/c/s function timer will start counting from fully open reverse and reset from any device
  • 24V modifictation available on control circuit ( R) and ( M) and is included with the new full function smart board (E)
348.000

Whiting Tongue & Groove Bottom Panel Assembly with #77 Lock Made to Order. **Quote Only

  • 15-1/2" x 96" standard size panel.
  • Extra wide panels will carry an additional charge
  • Primer only
1104-18FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 18' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Full case quantity only (12).
1104-8FT-CHARCL

Residential Side & Top PVC Weather-Strip with cap 8' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
AUXCARD

LiftMaster Auxiliary Relay Option Board

  • Provides additional contacts for and control of auxiliary devices such as external heaters security devices or warning devices
  • 5V to 240VAC
Programming Instructions
8FT-CHAIN-LINEAR

Linear 8ft Chain Rail for residential openers (HCT8C)

  • 8ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits
21-10298

Transformer 100VA

  • Multitap Transformer 120/208/277/575V Primary 24V Secondary 100VA 50/60 Hz
  • Fused at 5A
K20-1075B-2LP

LiftMaster Electric Motor 3/4 HP 115/230V 1PH L3 L4 ***NLA*** Replaced by K20-1075B-2LP-H24

  • Standard 3/4HP 115V Logic 3 or L4 model T J HJ SD & H
12-000I

Secure Brands Keypad with Intercom Post Mount

  • Post mount with Intercom
  • RemotePro KP 26 bit wiegand output keypads
  • Available in three different mounting configurations: post single gang or flush.
  • All single gang RemotePro KP models are available with a silver aluminum faceplate.
  • A heavy duty metal keypad is used with all exterior models providing years of trouble free entry.
  • Post mount models feature a stainless steel faceplate in a heavy metal powder coated enclosure with nightlight.
    • .......more details
75424

Marantec Universal Receiver / Remote Kit 315 MHz

  • Universal receiver kit includes one plug-in radio receiver and one M3-2312 remote control transmitter
  • Universal receiver plugs directly into the wall outlet
  • Same as part # 73870
  • Made in Germany
Installation InstructionsProgramming Instructions
M3-2314

Marantec 4-Button Transmitter 315 MHz 97244/122468

  • Same as part # 65893 and 97244
  • Visor mount
  • Includes battery CR2032
  • Made in Germany
Instructions
990LM

LiftMaster Surge Protector ** NLA

Installation ManualManuel d'Installation
1005-1-1/2-8'

Aluminum Bottom Retainer U-Shaped 8' Long

  • For door thickness 1-1/2"
28-30015

Truck Door 1" Vertical Track with Holes 93.5" for Todco Roll-Up Doors

  • Galvanized steel 14 gauge construction
  • Holes drilled to allow for faster plug weld installation to frame
  • For use with 1" rollers
11-3503_ROD

LiftMaster Rod 1/2-13x64 Threaded Take-Up Bolt

  • Used on slide gate operators using #50 chain.
  • Also referred to as adjuster bolts
91-G0149

LiftMaster Idler Bolt w/Zinc Fitting

  • Fits SL595
42-31247

LiftMaster Terminal Block 20A 600V

  • 3-position
5464.96

Whiting Top Seal Coldsaver 96" L 2-3/16" W

2X6SC50

Devanco Loop 2' x 6' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
SOLID_SHAFT_7FT

Solid Shaft 1" Keyed 7 ft Galvanized

  • Actual length is approx. 7'-1"
STATION081

Manaras Push Button Control Station 1-Button Nema 4/12

  • 1-button 1 N/O contact
  • Plastic
5X10PO50

Devanco Loop 5' x 10' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
DS-KIT

Linear Single Delta Radio Kit ** Discontinued

  • Kit includes one DT transmitter and one DR receiver
  • Same as: DNP00011
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Installation Manual
Z9405

Coupler 1-1/4" Bore Non-Adjustable

  • Malleable iron for strength
  • Set screws and jamb nuts installed
  • 1-1/4" Bore with 1/4" keyway
  • Length: 3.9"
PRO-GH-VFD

Micanan Variable Speed 1 HP 208/230V 3 Phase Operator

  • Variable Frequency Drive Operator
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
MWRTA12B

Miller Edge Wireless Transmitter with Audible Alarm and 1 Channel Receiver

  • For 2-wire edges
  • Was previously MWRTA02A now has a new board making installation easier
  • Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm.
  • This feature that activates when the battery has only 25% of its life remaining indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
  • The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.
K75-12858

LiftMaster Clutch Kit for SL595

  • Kit includes: Clutch Pressure plate Torque Limiter Sprocket Assembly Bell Washer Nut Hex Jam Clutch Disc and Keyway
Replacement Instructions
1013-1-1/4-24'

Rigid Vinyl Bottom Retainer L-Shaped 24' Long

  • For door thickness: 1-1/4"
K29-32410

LiftMaster Alarm Kit for SL575/585/595

  • Kit includes Alarm Spacer and Faston
Installation Manual
15-50B40LGH

Sprocket 40 Teeth 1" Bore 1/4" Keyway

AW-12A

Miller Edge Air Wave Switch in NEMA 4 Enclosure

  • Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
  • Applications: commercial sectional doors rolling doors and mass transit
  • Works on doors up to 60ft
  • Can be used with standard pneumatic hose and Miller Edge extrusion
  • Sensitivity: 2mm to 500mm
  • Ambient temperature range: -49F to 180F
    • .......more details
Instructions ManualSell Sheet
15-50B18QGH

Sprocket 18 Teeth 1-1/4" Bore 1/4" Keyway

SHAFT034

Manaras Clutch (Input) Shaft for MJH

  • MJ INPUT SHAFT 5/8-24X12
RS1029

Roller 2" Steel 9" stem- WL 10 ball

  • Steel Roller Wheel Diameter: 2"
  • Working Length: 9.5" Overall Length: 10.5"
  • Box qty: 100 Box weight: 60 lbs (2-9-10 WL steel)
029C98090

T-Style Complete Replacement Door White Stainless Steel Pkg 029C98090

  • Manufactured to exact size fully assembled tracking and spring assembly included.
  • Price varies according to size
SHAFT023

Manaras Intermediate Shaft for MJ operator

27-20004

Truck Door Dual-Spring Shaft 93" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
  • Cross Reference: W #2528
MK-00060

Micanan Timer Plug-In Type 0-10min 24V 8-Pin (MK00481)

Programming InstructionsAdding a timer
975LMC

LiftMaster Laser Parking Assist ** To extent of inventory

  • Works with Chamberlain (LiftMaster) Garage Door Openers
  • Easily connects with two wires to the photocell terminals of the opener
  • The Laser light turns on as you drive into the garage
  • Simply Adjust the light to a specific spot on the dash
Installation ManualManuel d'Installation
10-10355

LiftMaster Solenoid Link

883LM

LiftMaster Door Control Bell Button for Sec+ 2.0 (Use 883LMW)

  • Controls garage door operation and opener lights
  • Easy and fast programming
  • Compatible with Security+ 2.0 and MyQ remotes and accessories
Installation ManualManuel d'Installation
.234-258-L

Cut-to-Length Torsion Spring .234 x 2-5/8" Left Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.218-258-L

Cut-to-Length Torsion Spring .218 x 2-5/8" Left Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.283-2-R

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.207-2-R

Cut-to-Length Torsion Spring .207 x 2" Right Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
PD86CNP12QPMU

Carlo Gavazzi Photoelectric Switch Retro Reflective 12-24V AC/DC

  • Reflector (ER4) not included
Installation Manual
.283-134-R

Cut-to-Length Torsion Spring .283 x 1-3/4" Right Hand Wound White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.243-134-L

Cut-to-Length Torsion Spring .243 x 1-3/4" Left Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
MOUNTSHAFT018

Manaras Limit Shaft Kit Opera

Drawing
GK-BX

Genie Dual Frequency Wireless Keypad 37224R

  • Temporary PIN codes to allow for one time special access needs
  • Able to operate up to three Genie Intellicode garage door openers
  • Auto-seek dual frequency technology automatically transmits in both 315 and 390 MHz
  • Compatible with Intellicode 1 and Code Dodger series
Programming Instructions
G3T-BX

Genie 3-btn Dual Frequency Transmitter 37218R

  • This transmitter replaces all Intellicode and Overhead Door Code Dodger transmitters made after 1997.
  • For Intellicode operators pre-1997 use GITR3 for best results
  • Operates with 315 & 390 MHz Intellicode 2 technology
  • Able to control up to 3 garage doors
  • Visor clip and battery CR2032 included
  • Replaces: GIT GIC90 GMIC90 G2T OCDT ACSCTG TBSTG GIT-1 GIT-2 GIT-3 ACSCTG Type 1 ACSCTG Type 2 ACSCTG Type 3 TBSTG GIC90-1 GMIC90-3 GIC90-2 GMIC-3BL GIC90-3 OCDT-1 OCDT-2 OCDT-3 G2T-1 G2T-2 G2T-3 GICTD-1 GICT390-1 GIFT390-1 GIT390-4
    • .......more details
Programming InstructionsInstructions de programmation
CB14B0500

Cable 1/4" 7x19 500' Galvanized

  • Galvanized Cable 1/4" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
Comparison charts
14FT-I-BEAM

LiftMaster 14' I-Beam Rail 3714RV / CD1014

  • I-Beam Chain Drive Rail for model 3595
8FT-RAIL-CHAIN

LiftMaster 8' chain drive rail 1708LMC - colour code: Blue

  • #48 chain size
  • Price reflects cost if purchased with an opener
77810.0001

Overhead Door Box Assembly Cushion (#111389.0001.S) ** Price by quote only

  • Garage door operator bracket for older Overhead Door residential models (Automate 70 Touch n Go R-80 100 100SS 1000) and commercial garage door openers.
K001A6424-1

LiftMaster Circuit Board Assembly Kit 2010 390 MHz

Installation Manual
7001-14-W/B

Commercial Side & Top Weather-Strip 14' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
ME113-L

Miller Edge Black Left Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
    • .......more details
Installation ManualWorksheetSell Sheet
977LMC*

LiftMaster Wireless Keyless Entry 390 MHz - DISCONTINUED

  • Wireless Keyless Entry with 390 MHz rolling code
  • Compatible with all 390 MHz Chamberlain (LiftMaster) residential and commercial door openers and gate operators
  • Mounts easily to the door jamb with two screws
  • Compatible with Security+ Systems with amber learn LED
  • Compatible with models built from 1997-2005
  • Includes 9V battery
    • .......more details
.306_5-1/4"-LH

Torsion Spring .306 x 5-1/4" x 12ft LH Red

  • Wire size: .306
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.393_3-3/4"-LH

Torsion Spring .393 x 3-3/4" x 12ft LH Orange

  • Wire size: .393
  • Inside diameter: 3-3/4"
  • Length: 12 ft
813LM

LiftMaster 3-btn Dip-Style Transmitter Sec+ 2.0 ** To extent of inventory

  • Encrypted DIP style three-button remote control with Security+2.0 technology
  • Ideal for applications such as gated communities or commercial applications requiring a large number of remotes for a common entrance
  • Easy to code 12-position DIP switch offers up to 4096 codes
  • May also be programmed for Open/Close/Stop functionality
  • Narrow band transmission on 3 simultaneous frequencies (310 315 390 MHz)
  • Compatible only with Security+ 2.0â„¢ commercial receivers and operators
    • .......more details
Programming InstructionsInstructions de programmationSell Sheet
825LM

LiftMaster Remote Light Control Sec+ 2.0 ** To Extent of Inventory

  • Operate any lamp with your garage door opener remote control.
  • Operate from your computer or smartphone by using the Liftmaster Internet Gateway.
  • Compatible only with Security+2.0 garage door openers and MyQ technology accessories.
Programming InstructionsInstructions de programmation
LSGUN

Loop Sealant Gun for Quart Sized (32oz) Tubes

  • Caulking gun for LSBLK / LSGRY
71-B575

LiftMaster Interior Mount Brake Assembly 575V

Instruction Manual
41A5483-4C

LiftMaster Circuit Board Assembly *** To Extent of Inventory

  • Assembly includes: circuit board end panel and light socket
  • For belt drive units
  • Fits 2280 2580 WD822K(s) WD922K WD912K(S)
  • Also known as 41A5483-4 41A5483-4B
29-31245

LiftMaster Relay 12VDC 250VAC 4-Pin SPDT C & D relay 3-phase only

  • C & D relay 3-phase only
41A4252-6G

LiftMaster Circuit Board Assembly ** Discontinued

  • Assembly includes: circuit board end panel and light socket
  • Also includes: 1 Multi-Function wall control panel - 2 wire
  • For chain drive units with two lights
  • Fits 1250 1260 1270 1280 220WD 320WD 5100 7200 & 8100
41B5424

LiftMaster Belt Idler Pulley and Bracket (Built Years 2000+)

  • This is a Belt Pulley Bracket Replacement Kit. For use with various LiftMaster® and Chamberlain® Belt Drive Garage Door Openers that utilize a T-rail
  • Fits models: 2500 2580 3280 3850 3500
19-50HL

Half (Offset) Link #50

  • Half link for #50 chain
  • ANSI Standard Carbon Steel
19-41HL

Half Link #41

  • Half link for #41 chain
  • ANSI Standard Carbon Steel
41A3489

LiftMaster Complete Trolley Assembly for chain drive

  • For chain drive models 1984 +
  • Compatible with Sears Chamberlain
Installation Manual
144C54

LiftMaster Idler Belt Pulley

  • Wide idler belt drive pulley
  • For square rail assemblies
19-48ML

Master Link #48

  • For #48 chain (#410)
  • Same as #65 chain
24-115-1

Relay 8 terminal 115VAC DPDT

  • For most operators with contactor
  • Will work on Liftmaster MH Lynx MCJH and more
.375_5-1/4"-RH

Torsion Spring .375 x 5-1/4" x 12ft RH Yellow/Green

  • Wire size: .375
  • Inside diameter: 5-1/4"
  • Length: 12 ft