Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Vinyl
SEL2681R868-Z2

Erone 2-Relay Stand Alone Receiver 868MHz

Wireless System Chart
MK-00049

Micanan Overload Reset 3-Phase 1.8 - 2.6 Amps

MK-00045

Micanan Overload Reset 1-Phase 18 Amps

MK-00048

Micanan Overload Reset 3-Phase 1.2 - 1.8 Amps

MK-00140

Micanan Reversing Relay 24VDC Coil DPDT (Flange Mount)

  • 8-pin
MK-00225

Micanan Transformer 110V-24V-100VA

MW-00057

Micanan Splash Proof Cover Light Duty Fully Assembled

  • Splash proof cover for models: PRO-LJ J LH LHA and GJ
  • Same as MP-00253
MK-00062

Micanan Timer Base 8-pin

  • In closing cycle door will stop for 1.5 seconds and reverse to fully open
MV-00022

Micanan Pull Cord SPST Nema 7/9

MV-00236

Micanan Key Switch O/C Tamper Proofw/Best Core Cylinder Nema 4 Surface Mount

SD105L5-RH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 575V 3PH Right Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
ME110-2W-BLK-E

Miller Edge 2-Wire Black End Outlet 7/8" wide x 3/4" high Sold by the Foot

  • Electromechanical slide in edge for counter shutters rolling doors and barrier arm applications.
  • Touch sensitive signaling allows for immediate stopping and reversing of motion.
  • Temperature range -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Worksheet
12119

Doorlec Commercial Aluminum Sliding Carriage with Teflon Insert

  • Works on all Doorlec trolley operators
.375-334-R

Cut-to-Length Torsion Spring .375 x3-3/4" Right Hand Wound Yellow/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
2996.3

Truck Door 2" Steel Roller 5" Long Stem Enclosed Bearing for Whiting Roll-Up Doors

  • A Whiting original
PRO-J-7581-U-LH

Micanan 3/4HP 208V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
PRO-GT-15011-U

Micanan 1-1/2HP 115V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

  • On-Board receiver holds up to 20 transmitters
PRO-GT-10083-U

Micanan 1HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-10081-U

Micanan 1HP 208V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

K29-FDCL-500CCB

LiftMaster FDCL Receiver Logic Board with Battery Rev 500

  • Replacement kit charging circuit board firmware and battery for FDCL
.406-6-L

Cut-to-Length Torsion Spring .406 x 6" Left Hand Wound Blue/Yellow

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
PRO-T-5025-U

Micanan 1/2HP 220V 1P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-T-5083-U

Micanan 1/2HP 208V 3P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
MB-05504

Micanan Electric Motor Only 2 HP 575V 3PH C-Flange TEFC 56C

  • Fits GT GH GHC & GSD
PRO-LTB-5011-U

Micanan 1/2HP 115V 1P Commercial Trolley Operator With Brake N1 Eyes Monitored ECB

  • Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
  • Trolley track for door up to 12ft standard upcharge for 14' & 16'
  • Door speed 9 inches per second
  • UL325
  • On-Board receiver holds up to 20 transmitters
60-7248-SC8

Wheel Chock Safety Pkg incl'd: alum. chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) SC-8 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • "Claw" Like Bottom Assures Dependable Grip on Any Surface
  • Chock Fits Snug Under Tire Contour for Maximum Holding Power
  • Often Preferred For Snow and Ice Conditions
  • Light Weight and Reliable
  • Size: 7" wide x 11-1/2" long x 8" high
    • .......more details
60-7248-888

Wheel Chock Safety Pkg incl'd: laminated chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) 88-8 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • Fabric Reinforced Tire Rubber
  • Galvanized Steel Sides
  • Size: 8" wide x 8" long x 8" high
88-8XL

Wheel Chock 88-8XL Laminated Rubber Galv. Steel Sides

  • Made From Used Truck Tire Laminates Compressed and Fastened Under High Pressure
  • Galvanized Steel Sides
  • Size: 11-1/4" wide x 14" long x 14" high
60-7248-689E

Wheel Chock Safety Pkg incl'd: pryamid chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) 68-9E Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • Handles for chain fastening
  • Long Lasting 80 Durometer rubber
  • Size: 8" wide x 9" long x 6" high
60-7248-MWC32

Wheel Chock Safety Pkg incl'd: chock w eye hook wall bracket 15' chain 3/8"x1 7/8" anchors (4) 3/16" quick link (2) & English caution sign

  • System Includes (1) MWC-32 Chock Bracket Tie Back Chain English Caution Sign and (4) Wall Bracket Anchors
  • Good stability over others in this class
  • Long Lasting 80 Durometer rubber
  • Size: 6-1/2" wide x 9-1/2" long x 8-1/2" high
1004-2-16'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 16 ft***Actual Length 16'2"***

  • For door thickness 2"
RELAY043

Manaras Relay 4-Pole 24VAC

  • Used on Manaras MLJ MLH MLT Models
CP-SH-58-1212

Lynx Clutch Shaft Only for MCJH 5/8" x 12-1/2"

  • No pulley
MM00022

Micanan Support U-Bracket H/HHD MSI0015

  • Fits PRO-H/HHD
MK-00055

Micanan Transformer 575V-24V-50VA

  • Fingersafe
27-24416

Truck Door Dual Torsion Spring Assembly 96/33 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 96" Spring Length: 33" Wire diameter: .182 Winding cone color: Green
HRB-9

High Riser Bracket for 7" Above Dock or Higher 9"

  • High Riser 9" Riser Bracket for 7" Above Dock Door or Higher
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
SRB-5

Standard Riser Bracket for 6" Above Dock or Less 5"

  • Standard 5" Riser Bracket for 6" Above Dock Door or Less
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
E/1929/031

Automatic Systems Installation Plate Ass'y BL229

  • Used on the BL229 gate op.
MV-00354

Micanan Control Station 3-Btn O/C/S N4 Surface Mount c/w Key Lock-out & Red Pilot Light 24V

DBE-30

Molded Rubber Bumper Black 30" L x 4 1/2" W 3" Projection 6-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
  • Bumper comes with 6 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
DBE-20

Molded Rubber Bumper Black 20" L x 4 1/2" W 3" Projection 4-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
  • Bumper comes with 4 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
LVB1224-11

Laminated Bumper Black 12" Projection Vertical Installation 24" L x 11" W Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
STRUT-2-1/4-9'-NH

Door Strut 2-1/4" Non Hemmed 9 ft Long *** To Extent of Inventory

  • Reinforcement bar 2-1/4"
  • 20-GA
LB1010-14

Laminated Bumper Standard Black 10" x 14" 10" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB810-14

Laminated Bumper Standard Black 10" x 14" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
Drawing
TB406-24SF

Steel Faced Laminated Bumper Black 6" x 24" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
Q080

LiftMaster Dolly Latch Kit K75-50138

  • For Liftmaster trolley operator HCT
LB410-24SF

Steel Faced Laminated Bumper Black 10" x 24" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TVB636-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 36" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
TVB624-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 24" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
TVB620-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 20" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
TB612-36SF

Steel Faced Laminated Bumper Black 12" x 36" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB612-14SF

Steel Faced Laminated Bumper Black 12" x 14" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB610-14SF

Steel Faced Laminated Bumper Black 10" x 14" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB636-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 36" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
LB612-14SF

Steel Faced Laminated Bumper Black 12" x 14" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-14SF

Steel Faced Laminated Bumper Black 10" x 14" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
8010

LiftMaster DC Chain / Cable Drive Garage Door Opener ***Discontinued***

  • Customized DC Motor with soft start/stop action.
  • Chain/cable square steel rail (SSR) system for efficient operation and standard performance.
  • Security+2.0 increases remote control range and reduces interference for consistent operation.
  • PosiLock® electronically protects against forced openings.
  • The Protector System® invisible light beam auto-reverses the door if there is an obstruction.
  • Comes with: Door Control Button (883LM) 1-Button Remote Control (891LM)
    • .......more details
LLB420-22

Laminated Bumper Black 4" Projection L-Shaped 20" x 22" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • This model has angles on both sides
    • .......more details
LB406-24

Laminated Bumper Standard Black 6" x 24" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
34054

Doorlec V-belt Pulley Double 2" x 5/8" bore

1324-1-3/4"-BLK

Elton Commercial Window 1-3/4" thick 1324 Black Frame Sealed Glass ** Discontinued

  • Screw together window kit
  • Plexiglas window
  • Frame size tip-to-tip: 26-3/4" x 14-1/2"
  • Cut-out size: 25-5/8" x 13-3/8"
  • Vision area: 23-7/8" x 11-9/16"
  • Different glass options and frame colours are available upon request
    • .......more details
34115

Doorlec Awning Pulley 194 x 1"

  • Used on model LDJ & LDJ-3
CP-SH-34-1712_SHAFT_ONLY

Lynx Clutch Shaft Only for HDC Operators

  • Fits all HDC operators - waterproof or not. All HP all years
  • 3/4" x 17 1/2" - 2.15lbs
WRW

Erone Wiegand Wireless Receiver 433MHz

  • 433 MHz radio frequency systems offer longer range (up to 250m (820ft) less interference jamming and excellent reliability.
  • KeeLoq® Rolling Code technology ensure ultra-secure transactions.
  • Output: Wiegand 26 bit
  • Power requirements: 12 or 24V (AC or DC)
  • Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)
  • Compatible with Centaur and any 26 bit Wiegand-capable systems
    • .......more details
Wireless System Chart
Z9211-2

Stationary Cone Tool 2-5/8"

  • Easily dislodges the cone from the torsion spring
MB-03202

Micanan Electric Motor Only 1 HP 575V 3PH Base Mount O.D.P FR56

  • Fits T TB APT APTC J EJ H EHJ HHD SD
MM00149

Micanan GHC Frame Support U-Bracket MSI0161 (for 2 3HP)

MG00013

Micanan Ribbed Hex Nut 3/8" - 16 UNC

  • PRO-GHC operator parts
  • 8 required per operator
BB-1

Rubber Button Cover Black for 3BLM PBS

  • Rubber button cover only
K20-1075B-2TLP

LiftMaster Electric Motor 3/4 HP 115/230V 1Ph L3 L4 TEFC

7-21-1A

Lynx Barlock Latch

  • Comes with screws
Assembly Manual
.331-6-L

Cut-to-Length Torsion Spring .331 x 6" Left Hand Wound Red/White

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • For spring filler use part no. SPRING-FILLER
MF-00018

Micanan 3/8" Take-Up Bolt c/w 2 Hex Nuts & 1 Lock Washer

37355

Reversing Contactor 120V Coil

BOARD060R

Manaras Replacement Circuit Board (No Monitoring)

  • Control board for BOARD065
MK-00013

Micanan Relay 120VAC coil DPDT (Flange Mount)

ME00037

Micanan Clutch Shaft Only for PRO-LH

109007

Allstar Slide Switch Only Ivory *** Discontinued

  • ABC selector switch only
3PHCONV

LiftMaster 3-Phase Conversion Kit

  • The transformer kit will convert an input voltage of 208 / 240 / 480 / 575 3 phase VAC to an output voltage of 120 VAC.
  • Included in New 3-Phase Transformer Kit: Transformer with bracket (2) Cable ties Bushing Wire sleeve 2’ (.61 m) (5) Wire nuts Mounting bracket 10-36745 and mounting hardware (for installing on CSW24U operators) (6) Operator rating replacement labels Accessory outlet rating replacement label
  • Compatible with SL3000501U SL3000101U CSW200501U and CSW200101U AC gate operators only
3PHCONV_Installation-manual3PHCONV_Manuel-installation
41C5548

LiftMaster Wiring Harness Kit Low Voltage

  • For use with various LiftMaster® and Chamberlain® Garage Door Openers
MP-00002-575V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

  • Controlling action of two lights- sockets supplied on cover
V5001-DARK-OAK

Replacement Vinyl Only for 5001-DOD Sold per Foot

Q209

LiftMaster Gear Reducer Pulley K17-50223

  • DC-1000 1/2" ID
22000

Doorlec Enclosure EEMAC 12 and 4 1 Hole 22MM

  • Works with selector switch #22016 (sold separately)
CB380500

Cable 3/8" 7x19 500' Galvanized

  • Galvanized Cable 3/8" 7x19 500ft spool.
  • Cable break strength: 14000 lbs
1KXL-BC

Key Switch N4 Exterior Lockout Control with Best Cylinder Surface Mount

  • Two position ON-OFF
  • Dimensions: H=4-3/8" W=4-1/8" D=2-5/8"
CB-1.115

Whiting Stainless Steel Cable 115" L with Black Grommet 5/16" Eye

  • 7x7 stainless cable
.393-514-L

Cut-to-Length Torsion Spring .393 x 5-1/4" Left Hand Wound Orange

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
MM00024

Micanan Cam Plate for PRO-HHD

9006-08

Excalibur Threshold Kit 8'2" x 6" W Solid Aluminum ** Price by Quote Only

  • Stands 1/2" tall
  • Built with 6061-T6 solid aluminum to withstand extreme weight and excessive traffic conditions.
  • Two-way fastening/seal system won’t shift buckle or leak
  • Top V-groove design provides for skid proof protection and improved tire traction on loading docks and incline ramps.
  • The 1/2" diameter wire access port makes it easy for sensor and security installations.
  • The kit comes complete with pre-drilled counter sink holes 3/8" anchors and sealant.
    • .......more details
126474-7K

Spring Failure Device For 1" Shaft RH & LH Assembly

  • Designed to reduce the risk of the door falling in the event of spring breakage
  • 3-3/8" offset between wall and shaft (separate extension bracket available for offset of 4-3/8" up to 6")
  • For 1" shaft (1-1/4" shaft available for special order)
  • Fits 1-3/4"-6" Torsion Springs
  • One device per spring is required
  • Not for use with duplex springs
    • .......more details
6X24SC50

Devanco Loop 6' x 24' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation manualManuel d'installationLoop placement guideGuide de positionnement des boucles
26CW94323-CUT

Truck Door Bottom Panel with Seal (13" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes only with bottom retainer and seal (installed)
    • .......more details
.306-258-R

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
PRO-H-7553U-LH

Micanan 3/4HP 575V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
38415A

Genie Chain Drive Sprocket

  • For Genie & Overhead Door Models
  • This is a 8-tooth sprocket with a hex drive bore
  • Genie Brand Models: Relia-G 600 Relia-G 800 1024 2024 QuietLift-600 QuiteLift-800 1042 2042 ChainLift-800 ChainLift-600
  • Overhead Door Brand Models With CHAIN DRIVE: Legacy 800 2026 Standard Drive 1026
41A5483-2C

LiftMaster Circuit Board Assembly *** To extent of inventory

  • Assembly includes: Circuit board and end panel
  • For chain drive units with one light
  • Fits models 2245 & 2255
  • Last letter of the part # indicates revision date the most recent product will be sent out
OCDFX2

Overhead Door 2-Btn Transmitter 315/390 Mhz

  • Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
  • Part Number: OCDFX2.S GIDFX2.S
Programming instructionsInstructions de programmation