Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MK-00049

Micanan Overload Reset 3-Phase 1.8 - 2.6 Amps

MK-00045

Micanan Overload Reset 1-Phase 18 Amps

MK-00048

Micanan Overload Reset 3-Phase 1.2 - 1.8 Amps

MK-00140

Micanan Reversing Relay 24VDC Coil DPDT (Flange Mount)

8-pin

MK-00225

Micanan Transformer 110V-24V-100VA

MW-00057

Micanan Splash Proof Cover Light Duty Fully Assembled

Splash proof cover for models: PRO-LJ J LH LHA and GJ
Same as MP-00253

MV-00028

Micanan 24V Commercial Receiver NEMA-4 CR32E-24V

MK-00062

Micanan Timer Base 8-pin

In closing cycle door will stop for 1.5 seconds and reverse to fully open

MV-00220

Micanan Pull Cord DPST Swivel Type - Nema 4

MV-00016

Micanan Key Switch O/C Tamper Proof Nema 1 Flush Mount

MV-00236

Micanan Key Switch O/C Tamper Proofw/Best Core Cylinder Nema 4 Surface Mount

MV-00010

Micanan 3-btn O/C/S Nema-4 Pushbutton Control Station

Surface mount
Metal Housing

SD105L5-RH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 575V 3PH Right Hand (Must include hardware box)

Perfect for split and sliding doors involved with industrial applications.
It is installed above the door and corresponds with the direction the door will be traveling.
Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
Built In Security+ 2.0 radio receiver
Solenoid brake included

.......more details

MD-00425

Sprocket 60B18 x 1" Bore 1/4" KW

ME110-2W-BLK-E

Miller Edge 2-Wire Black End Outlet 7/8" wide x 3/4" high Sold by the Foot

Electromechanical slide in edge for counter shutters rolling doors and barrier arm applications.
Touch sensitive signaling allows for immediate stopping and reversing of motion.
Temperature range -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet

ME110-2W-BLK-L

Miller Edge 2-Wire Black Left Hand Outlet 7/8" wide x 3/4" high Sold by the Foot

Electromechanical pressure sensitive edge for counter shutters rolling doors and barrier arm applications.
Touch sensitive signaling that allows for immediate stopping and reversing of motion.
Temperature range -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration.

.......more details

Worksheet

12119

Doorlec Commercial Aluminum Sliding Carriage with Teflon Insert

Works on all Doorlec trolley operators

.437-334-L

Cut-to-Length Torsion Spring .437 x 3-3/4" Left Hand Wound Red/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.363-514-R

Cut-to-Length Torsion Spring .362 x 5-1/4" Right Hand Wound Green/White

Priced per inch - cones sold separately
For factory installed cones use part no. C-514-INSTALLED

.319-514-L

Cut-to-Length Torsion Spring .319 x 5-1/4" Left Hand Wound Blue/Green

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-514-Installed

.295-514-L

Cut-to-Length Torsion Spring .295 x 5-1/4" Left Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-514-INSTALLED

.375-334-L

Cut-to-Length Torsion Spring .375 x3-3/4" Left Hand Wound Yellow/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

2996.3

Truck Door 2" Steel Roller 5" Long Stem Enclosed Bearing for Whiting Roll-Up Doors

A Whiting original

PRO-J-7521-U-RH

Micanan 3/4HP 230V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-J-7581-U-LH

Micanan 3/4HP 208V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-GT-15011-U

Micanan 1-1/2HP 115V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

PRO-GT-10083-U

Micanan 1HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-10081-U

Micanan 1HP 208V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-7581-U

Micanan 3/4HP 208V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-5083-U

Micanan 1/2HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

K29-FDCL-500CCB

LiftMaster FDCL Receiver Logic Board with Battery Rev 500

Replacement kit charging circuit board firmware and battery for FDCL

PRO-TB-10053-U

Micanan 1 HP 575V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 & 1 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-TB-5083-U

Micanan 1/2HP 208V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-5025-U

Micanan 1/2HP 220V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-5083-U

Micanan 1/2HP 208V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

MB-05504

Micanan Electric Motor Only 2 HP 575V 3PH C-Flange TEFC 56C

Fits GT GH GHC & GSD

PRO-LTB-5011-U

Micanan 1/2HP 115V 1P Commercial Trolley Operator With Brake N1 Eyes Monitored ECB

Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
Trolley track for door up to 12ft standard upcharge for 14' & 16'
Door speed 9 inches per second
UL325
On-Board receiver holds up to 20 transmitters

60-7242

Econo Caution Sign English 14" x 10"

60-7248-SC8

Wheel Chock Safety Pkg incl'd: alum. chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) SC-8 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
"Claw" Like Bottom Assures Dependable Grip on Any Surface
Chock Fits Snug Under Tire Contour for Maximum Holding Power
Often Preferred For Snow and Ice Conditions
Light Weight and Reliable
Size: 7" wide x 11-1/2" long x 8" high

.......more details

88-8XL

Wheel Chock 88-8XL Laminated Rubber Galv. Steel Sides

Made From Used Truck Tire Laminates Compressed and Fastened Under High Pressure
Galvanized Steel Sides
Size: 11-1/4" wide x 14" long x 14" high

60-7248-689E

Wheel Chock Safety Pkg incl'd: pryamid chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) 68-9E Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Handles for chain fastening
Long Lasting 80 Durometer rubber
Size: 8" wide x 9" long x 6" high

60-7248-MWC32

Wheel Chock Safety Pkg incl'd: chock w eye hook wall bracket 15' chain 3/8"x1 7/8" anchors (4) 3/16" quick link (2) & English caution sign

System Includes (1) MWC-32 Chock Bracket Tie Back Chain English Caution Sign and (4) Wall Bracket Anchors
Good stability over others in this class
Long Lasting 80 Durometer rubber
Size: 6-1/2" wide x 9-1/2" long x 8-1/2" high

1004-2-16'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 16 ft***Actual Length 16'2"***

For door thickness 2"

RELAY043

Manaras Relay 4-Pole 24VAC

Used on Manaras MLJ MLH MLT Models

CP-SH-58-1212

Lynx Clutch Shaft Only for MCJH 5/8" x 12-1/2"

No pulley

HCRH1

Hinge Combination Roller Hinge Assembly #1 Galvanized

MK-00055

Micanan Transformer 575V-24V-50VA

Fingersafe

27-24416

Truck Door Dual Torsion Spring Assembly 96/33 for Whiting Roll-Up Doors

Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
Springs are treated with rust preventative
Roadside cable drum is color coded RED
Specs: Shaft Length: 96" Spring Length: 33" Wire diameter: .182 Winding cone color: Green

SRB-5

Standard Riser Bracket for 6" Above Dock or Less 5"

Standard 5" Riser Bracket for 6" Above Dock Door or Less
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

SRB-3

Standard Riser Bracket for 6" Above Dock or Less 3"

Standard 3" Riser Bracket for 6" Above Dock Door or Less
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

MV-00354

Micanan Control Station 3-Btn O/C/S N4 Surface Mount c/w Key Lock-out & Red Pilot Light 24V

DBE-30

Molded Rubber Bumper Black 30" L x 4 1/2" W 3" Projection 6-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
Bumper comes with 6 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

.......more details

DBE-20

Molded Rubber Bumper Black 20" L x 4 1/2" W 3" Projection 4-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
Bumper comes with 4 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

.......more details

STRUT-2-1/4-9'-NH

Door Strut 2-1/4" Non Hemmed 9 ft Long *** To Extent of Inventory

Reinforcement bar 2-1/4"
20-GA

LB1212-14

Laminated Bumper Standard Black 12" L x 14" W 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB1212-12

Laminated Bumper Standard Black 12" L x 12" W 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB1210-14

Laminated Bumper Standard Black 10" x 14" 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB1010-14

Laminated Bumper Standard Black 10" x 14" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB820-11

Laminated Bumper Black 8" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB812-24

Laminated Bumper Standard Black 12" x 24" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB812-14

Laminated Bumper Standard Black 12" x 14" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB410-36SF

Steel Faced Laminated Bumper Black 10" x 36" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB406-24SF

Steel Faced Laminated Bumper Black 6" x 24" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

Q080

LiftMaster Dolly Latch Kit K75-50138

For Liftmaster trolley operator HCT

LB410-24SF

Steel Faced Laminated Bumper Black 10" x 24" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TVB636-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 36" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

TVB624-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 24" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

TVB620-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

TB612-36SF

Steel Faced Laminated Bumper Black 12" x 36" 6 3/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB612-14SF

Steel Faced Laminated Bumper Black 12" x 14" 6 3/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB610-14SF

Steel Faced Laminated Bumper Black 10" x 14" 6 3/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB636-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 36" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

LB612-14SF

Steel Faced Laminated Bumper Black 12" x 14" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-14SF

Steel Faced Laminated Bumper Black 10" x 14" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

8010

LiftMaster DC Chain / Cable Drive Garage Door Opener ***Discontinued***

Customized DC Motor with soft start/stop action.
Chain/cable square steel rail (SSR) system for efficient operation and standard performance.
Security+2.0 increases remote control range and reduces interference for consistent operation.
PosiLock® electronically protects against forced openings.
The Protector System® invisible light beam auto-reverses the door if there is an obstruction.
Comes with: Door Control Button (883LM) 1-Button Remote Control (891LM)

.......more details

LLB620-22

Laminated Bumper Black 6" Projection L-Shaped 20" x 22" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.
This model has angles on both sides

.......more details

LVB630-11

Laminated Bumper Black 6" Projection Vertical Installation 30" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB430-11

Laminated Bumper Black 4" Projection Vertical Installation 30" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

34054

Doorlec V-belt Pulley Double 2" x 5/8" bore

1324-1-3/4"-BLK

Elton Commercial Window 1-3/4" thick 1324 Black Frame Sealed Glass ** Discontinued

Screw together window kit
Plexiglas window
Frame size tip-to-tip: 26-3/4" x 14-1/2"
Cut-out size: 25-5/8" x 13-3/8"
Vision area: 23-7/8" x 11-9/16"
Different glass options and frame colours are available upon request

.......more details

MD-00246

Double Sprocket 41B14 / 41A32 with 1" Bushing

Double sprocket for PRO-H/HB

34115

Doorlec Awning Pulley 194 x 1"

Used on model LDJ & LDJ-3

CP-SH-34-1712_SHAFT_ONLY

Lynx Clutch Shaft Only for HDC Operators

Fits all HDC operators - waterproof or not. All HP all years
3/4" x 17 1/2" - 2.15lbs

WRW

Erone Wiegand Wireless Receiver 433MHz

433 MHz radio frequency systems offer longer range (up to 250m (820ft) less interference jamming and excellent reliability.
KeeLoq® Rolling Code technology ensure ultra-secure transactions.
Output: Wiegand 26 bit
Power requirements: 12 or 24V (AC or DC)
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)
Compatible with Centaur and any 26 bit Wiegand-capable systems

.......more details

Wireless System Chart

K79-32927

LiftMaster Control Board Autogate *** Not Available

Replacement control board used in various Autogate Operators.
Autogate is a gate operator manufacturer that utilizes LiftMaster control boards in their operators
Formally AG001

Z9211-2

Stationary Cone Tool 2-5/8"

Easily dislodges the cone from the torsion spring

MB-03202

Micanan Electric Motor Only 1 HP 575V 3PH Base Mount O.D.P FR56

Fits T TB APT APTC J EJ H EHJ HHD SD

MG00013

Micanan Ribbed Hex Nut 3/8" - 16 UNC

PRO-GHC operator parts
8 required per operator

41A4208-2

LiftMaster Chain Spreader Kit

Chain Spreader Replacement Kit.
For use with various LiftMaster® and Chamberlain® Chain drive garage door opener models.
Complete kit includes: Chain spreader replacement screws and washers.
Also known as: 41A4208 41A4208-2 062210