Devanco Canada - Get The Right Garage Door Opener‎ and Parts

7-6137

Richard-Wilcox 1x#31 Lock Joint Clip

Used with #461-0004 track

OSH-6213-CONT-LH

Manaras Opera-SH 3/4 HP 240V 1Ph Contactor Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

LRS-C1

EMX Vehicle Detector Control Unit for Single Sensor 2303-2

The Loop Replacement System (LRS) features advanced 3-axis magnetoresistive sensing technology that responds to changes in the Earth’s magnetic field caused by ferrous objects.
Three sensing elements provide measurements in the X Y and Z axes to improve detection sensitivity when used in either above or below ground installations.
The LRS is equipped with our new DETECT-ON-STOP™ or (DOS®) feature which allows detection only when a vehicle has come to a complete stop.
Backwards compatible with CS303 sensors

DEV-RSSD-4000-INS

Devanco Rolling Steel Service Door 4000 20GA Insulated Galvanized Slats **Made to Order

Model 4000 Insulated roll up door is complete with a curtain hood guides counterbalance and option for operation such as chain hoist electric operator.
The insulation shall consist of closed cell urethane foam injected insulation a minimum of 1 inch thick providing a 7.2 R-value and sound barrier protection with an STC 25 rating.
Insulation is pressure foamed in place bonding both the front and back slats while filling all voids and creating a thermal break.
Pricing varies according to size and options selected.

RSH-6214-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 240V 1PH W/ Elect. Board N4X Thru Beam Eyes LH

High speed heavy-duty v-belt drive industrial operator.
Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
Two times the speed of the standard jackshaft operator
Manages soft-starts and soft-stops
Can be wall or shelf mounted on either side of the door
Cast iron pillow block bearings

.......more details

GH-353-1

Doorlec Industrial Gearhead Door Operator 1 HP 575V 3-Phase

Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Worm gear reducer 40:1 ratio for high-torque and long life
Solenoid Disk Brake Prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Optional Friction Clutch available

.......more details

MOD114C

Manaras Synthetic Oil Upgrade for MGH up to 1.5HP

This Upgrade Mod. is only available when purchaed with a compatible operator
Synthetic oil is placed in the operator's reducer for improved performance stability and decreased sensitivity to temperature variances

SSZP15-6

Solid Shaft 1" Keyed Zinc Plated 15'-6"

CAPXLTK

LiftMaster Trim Kit and Back Kit

Trim ring and back box for CAPXL.
Conceal openings left from other systems in flush-mount Infinity L and Icon installations.
Dimensions: Outer Trim – 23.75” x 19.375”

BCH751L5R-BZ

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Op L5 Carwash and Roller Bearing Mod. RH ***No Longer Available

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

MOTOR276-WIRED

Manaras Electric Motor 1HP 575V 3PH Wired for ECB/Brake

ME110-C3

Miller Edge Black Rigid PVC Mounting Channel Double-Sided Tape Sold by the Foot

7/8" length

TCBOS-311

Doorlec Single Arm Barrier Gate Op 1/3HP 120volts w/ heater and DC2000 board

Includes 500W heater

1KXS

Key Switch O/C w/Stop Btn Tamper Proof Nema 4 Surface Mount

OPEN-CLOSE with Center Return Key Switch with Stop Button Mortise Cylinder Tamperproof
Dimensions: H=4-3/8 W=4-1/8"" D=2-5/8""
Randomly keyed

TRACK-SET-2-134-7

2" Tracks Set 7'-0" Torsion 1-3/4" Door Clips for Wood Frame 15" Radius *** By quote only

BCSI-PM28

Pivin Drapeau Disconnect Coupler BCSI Gate Operator ** Price by Quote Only

CP-LX300

Lynx Interface Board for UL325 models

For use on 460V & 575V 3 Phase only

GAREX-PVC-W-9

Residential Side & Top PVC Weather-Strip with cap 9' Long (109") - White

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

QW210

NTE Flameproof Resistor 1/4 Watt 1 kohm 250 mW Axial Lead Sold Individually

ME123-2M-BLK-RH

Miller Edge Black RH 2-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

236514

Wayne Dalton Res. Bottom Bracket Roller Holder RH

Compatible with Wayne Dalton 9100 9400 9600 9800 Foamcore II garage door models.
Pins & Cotters Included
Top quality galvanized steel
Dimensions: 4" Wide x 1.25" High x 1" side flange with milford pin
Sold as a single unit

MC00001

Micanan Gear Reducer 45:1 (1/2 3/4 & 1HP)

For PRO-GH

ET1820PPAS-1

Carlo Gavazzi Through Beam Reciever 20M Plug

High power through-beam photoelectric switch.
Range up to 20 m.
Easily adjustable sensitivity with 270° potentiometer.
LED output indication.
Precise detection through narrow beam.
Short M 18 metal housing for heavy duty applications. IP 67.

.......more details

K23-20523

LiftMaster Interlock Switch 125/250VAC 3A N4

For use with various LiftMaster® Commercial Door Operators

ALUM-322

Aluminum 24" x 100' Spool Red # 322

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 322
Reverse side is #431 Bright White

Colour chart

18212

Limit Switch LS2 G3M Female

For use with Rite-Hite dock levelers

CB14B0500-KOR

Cable 1/4" 7x19 500' Galvanized Supreme

Galvanized Cable 1/4" 7x19 500ft spool.
Cable break strength: 2000 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

MOD114A

Manaras Synthetic Oil Upgrade Only

This Upgrade Mod. is only available when purchaed with a compatible operator
Synthetic oil is placed in the operator's reducer for improved performance stability and decreased sensitivity to temperature variances

MM00139

Micanan N-4 Cable Entry Tube

EHJW-353-3/4

Doorlec Industrial Jackshaft Op. Watertight ECB 3/4 HP 575V-3Ph

Equipped with: 3-btn control Adjustable Automatic Friction Clutch Emergency Chain Hoist and Heavy-Duty Solenoid Brake.
With DC-2000 controller
Watertight and Dust Tight EEMAC Type 4/12

GX-175-A-R16

Garex Ready to Install Door Special Order

R16 Insulation - 2 wide shadow lines at the top and bottom of each panel - Available in Aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

WOODGRAIN-R16

Garex Ready to Install Door Special Order

R16 Insulation - Woodgrain Only - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

CP-SH-34-MC3

Lynx Complete Limit Shaft Assembly #41 Chain

For trolley operator

41D8260

LiftMaster Cover 8355W

A one piece LiftMaster® "Silver" Replacement Cover.
For use with LiftMaster® 8355W Series AC Belt Drive WiFi® Garage Door Openers

CP-MO-34-123/1

Lynx Electric Motor 3/4 HP 115/230V 1 Ph

Electric motor only

M-0319

Autogate Groschopp Inline Motor 24V

PRO-GH-15011U-RH

Micanan 1.5 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

SPR41B36X11/4

Sprocket 41B36 x 1-1/4" Bore 1/4" Keyway

Same as MD-00322

SA1929/A17

Automatic Systems Retrofit Logic Board with Drive for BL229 Board *** Disc

Retrofit Assembly for the BL229 board this includes the new logic board with the drive.
Comes with E/BLOP/371 which are the loop detectors that go with that board. (no cost for the moment)

SPRAY-429

Aluminum Touch Up Spray Paint Ice White / Blanc Glacier #429 *** To Extent of Inventory

140g

60-7531

Fasteners Wedge Anchor 3/4" x 5-1/2" 4/Bag

Secure anchoring into concrete brick or block
Ideal for mounting dock bumpers
4 per bag

E/1929/071

Automatic Systems Round Arm Ass'y 16'-5" (BL229)

Used on the BL229 gate op.

30004

Doorlec Brake Solenoid 460V with wire leads

WLMODULE002

Manaras Univ. Aux Output Module BOARD070

LZE500

Erone L & Z-Bracket for Maglock ESM500

RBH505L5-RH

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 Right Hand ***NLA

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

RBH505L5-LH

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 Left Hand ***NLA

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

7M-NICE-BAR-ASBY

NICE Replacement Bar Assembly for M7BAR Barrier Gate

Bar assembly comes with:
(1)XBA15 -- 3M BAR
(1)XBA14 -- 4M BAR
(1)XBA9 -- EXPANSION JOINT FOR CONNECTING BARS
(2)XBA13 -- RUBBER IMPACT PROTECTION STRIP
(2) WA10 -- RED ADHESIVE REFLECTIVE STRIPS

.......more details

.192-2-R

Cut-to-Length Torsion Spring .192 x 2" Right Hand Wound Silver

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

P-75H

End Plug for 3/4" ID Rubber Air Hose w/ Center Hole Qty 1

Sold per plug

SELECTOR-8L5

Devanco replacement rotating 8 position switch selector for 8L5-OCS

replacement rotating encoded 8 position selector for 8L5-OCS

DHJ501L5-LH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 1/2 HP 115/230 VAC Logic 5 Left Hand***Discontinued

Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
Optimal for shopping mall applications with heavier rolling doors and grilles.
Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
Industrial Ball Bearings on 1" Output Shaft
Second Floor-Level Disconnect for Manual Lifting in an Emergency

.......more details

WHITING-PW

Whiting White Urethane Topcoat Option Dry Freight Door Panel

This is an option when ordering a panel

K1A6408

LiftMaster APE Kit 24V

For use with various LiftMaster® Swing Gate and Slide Gate Operators

3BXL

Control Station Exterior Surface Mount O/C/S N4 with Key Lockout

Metal Enclosure
Buttons aligned in a triangular pattern
H=4-3/8" W=4-1/8" D=2-5/8"

3BXL

Z9966

Deuer Cable Puller

Light duty wire and cable gripping tool
For wire 1/16" - 1/4" diameter
Recommened for residential use only
1300 lbs. capacity

F520-3.15-SB

Fuse 5 x 20mm 3.15A 250V Slow Blow 5/Pkg

K32-37560-3

LiftMaster Gear Reducer 28:1

This is a replacement Gear Reducer (28:1). Compatible with LiftMaster® HCTDCU Overhead Gate Operators.

K75-39337

LiftMaster Trolley Nut Kit LA500

The travel nut on LA500DC and LA500DCS gate operators may break when excessive force is applied to the gate such as being struck from a vehicle.
The travel nut can be identified as the white plastic nut that attaches to the internal lead screw of the arm.
The symptom of this problem is that the trolley assembly slides back and forth along the guide slots without mechanical restraint.
LiftMaster has created Trolley Service Kit K75-39337 with all the necessary parts and provides instructions on how to replace a damaged travel nut within an LA500 arm

Replacement instructions Instructions de remplacement

2500-1980

Linear 3-Phase Motor Board

Motor board for "green board" generation OSCO gate operators.
For HSLG BGU GSLG VS-GSLG SLC and their variants

MP00129

Micanan Up-Charge Track and #41 Chain for 12' h Door PRO-APTC

For 1/2 HP Micanan trolley operator PRO-APTC

K94-37848-1

LiftMaster Electric Motor 1HP

Replacement motor for SL595101U

3500

Whiting Beverage Align Roller 1" Screw Type

A Whiting original

K001D7121-1

LiftMaster Main Board EL1SS

Replacement board only

PPLK1-100

LiftMaster Passport Lite 1-Button Mini Remote with Sec+ 2.0 Technology 100/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Keychain remote control sold in a 10 pack

.......more details

Programming instructions Instructions de programmation Sell sheet Brochure

1004-134-10'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 10 ft**Actual Length 10'2"***

For door thickness 1-3/4"

K1D7078

LiftMaster EMI Board

This is a replacement EMI Board. Compatible with LiftMaster® Model HCT Overhead Gate Operators

.393-334-R-C

Cut-to-Length Torsion Spring .393 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

.375-514-R-C

Cut-to-Length Torsion Spring .375 x 5 1/4" Right Hand Wound. Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.243-258-R-C

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

PRO-HHD-10083U-R

Micanan 1 HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

1 HP208V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Specification Sheet

PRO-HHD-10083U-L

Micanan 1 HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

1 HP208V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation Manual Specification Sheet

PRO-HB-5023U-RH

Micanan 1/2HP 230V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

MK-00043

Micanan Overload Reset 1-Phase 15 Amps

MK-00562

Micanan Relay 120 VAC 8-Pin Plug-In

MK-00223

Micanan Transformer 460V-110V-100VA

TN33C

Wire Nuts (Marrette) Yellow 22-10 AWG 100/Pkg

Screw-on wire connector
Wire Range: 22-10 AWG
Rating: 105C (221F)
Voltage: 600V
Approval: CSA UL 486C Listed

MV-00002

Micanan 2-btn O/C Nema-1 Pushbutton Control Station Metal

Surface mount

GDI-HB320

GDI Direct Drive & Jackshaft HAML-RBH-A830 Nema 4 To Accept 1" Shaft UL325 Photo Eyes Extra

Compact & Light Weight - Fast Installation
Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
Soft start soft stop

.......more details

PHOTO-008E1

Manaras Non-Monitored Photoelectric Cells Nema 1 5-45' Range

Thru-Beam type

12119

Doorlec Commercial Aluminum Sliding Carriage with Teflon Insert

Works on all Doorlec trolley operators

PRO-J-10011-U-LH

Micanan 1HP 115V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Installation Manual (EN) Specification Sheet

ALUM-265

Aluminum 24" x 100' Spool Antique Brown / Brun Antique # 265

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 265
White #431 on reverse side

Colour chart

PRO-APTB-7553-U

Micanan 3/4HP 575V 3P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

PRO-APTB-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-7553-U

Micanan 3/4HP 575V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

60-7248-81111

Wheel Chock Safety Pkg incl'd: orange urethane chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) 811-11 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Not For Use on Ice
High Visibility
Orange Urethane
Size: 11" wide x 8" long x 8" high

BG770-50-11

LiftMaster Industrial-Duty Barrier Gate Operator 1/2 HP 115V 1 Ph *Discontinued Replaced by MATDCBB3*

A reliable gear-driven barrier gate operator that is perfect for industrial applications.
This barrier gate supports arm lengths of up to 15 ft.and arms weighing up to 25 LBS
2-btn control station Open/Close
Fully adjustable limit system
Pad mount
Security+ 2.0 technology

.......more details

42GRR-9001

Allen Bradley Series 9000 Photoelectric Sensor Thru-Beam Receiver Unit

nput: 20-40VAC 10-55VDC 4VA

MO00019

Micanan Extension Spring for PRO-J

MM00021

Micanan Disconnect Lever MSI0012

D4-120

Extruded Bumper Black 120" L x 4 1/2" W x 3 3/4" H w/Metal Insert

Sold in 10' Lengths and cut to measure
Includes 10' Metal Washer Insert
Comes with 5 Holes for mounting or none - Please Specify When Ordering Bumper

HRB-8

High Riser Bracket for 7" Above Dock or Higher 8"

High Riser 8" Riser Bracket for 7" Above Dock Door or Higher
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

MK01065

Micanan Light Duty Resistor 2 OHM 25W c/w Wire Leads

M2818

Molded Rubber Bumper Black 18" L x 8" W 2" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

.......more details

LB1010-24

Laminated Bumper Standard Black 10" x 24" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB810-14

Laminated Bumper Standard Black 10" x 14" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

Drawing

LB610-36

Laminated Bumper Standard Black 10" x 36" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details