Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Vinyl
202-0022

TNR Composite Bottom Bar Arm for HDXL *** Price by Quote Only

MQ00007

Micanan Spring Pin 1/4" x 2" Long

HCT12

LiftMaster HCT Rail Only 12'

  • Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
  • Heavy-duty 12-gauge C channel corrosion resistant steel track.
  • This DOES NOT include the head unit
  • Will open a standard sectional door 11'6" high
2376.187*31.930

Whiting Torsion assembly .187 wire size 31" spring length 93" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
7-6137

Richard-Wilcox 1x#31 Lock Joint Clip

  • Used with #461-0004 track
OSH-6213-CONT-LH

Manaras Opera-SH 3/4 HP 240V 1Ph Contactor Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
OSH-6213-CONT-RH

Manaras Opera-SH 3/4 HP 240V 1Ph Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
27121

Doorlec Electric Motor 1-1/2 HP 208V 3PH DC223C

RSH-6214-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 240V 1PH W/ Elect. Board N4X Thru Beam Eyes LH

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
EHJ-353-1

Doorlec Industrial Jackshaft Op. 1 HP 575V-3Ph

  • Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
GH-353-1

Doorlec Industrial Gearhead Door Operator 1 HP 575V 3-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
K19-4853

LiftMaster Chain #48 x 53 No Master Links

  • Fits the SL595UL gate operators
K75-37556

LiftMaster Drive Shaft Kit SL595UL

  • Idler shaft sprocket chain and chain links
15220

Doorlec Fuse 1 AMP Slow Blow Sold Individually

3007-1

Elton Telescopic Door Handle / Foot Plate Black

  • For door thickness: 1-3/8" - 2"
  • Black polyethlene
  • Cut-out size: 6-3/8" x 3-5/8"
MINIDEPTH001-MOD

Manaras Minimum Depth Mod. OTH OTBH

  • Always use chain #41 with this mod.
2050P

LiftMaster HD Roller Cage Bearing Hinge Bolt to Gate/Post Prime Coated Sold Individually

  • Heavy Duty Roller Cage Bearing Hinge - Bolt to Gate Bolt to Post (Prime Coated)
  • Heavy Duty Construction for Maximum Durability
  • Dependable Roller Cage Bearing Design
  • Even Weight Distribution
  • Five Times The Weight-Bearing Surface of the Nearest Large Hinge
  • Convenient Bolt-On Model
    • .......more details
GHW-383-2

Doorlec Industrial Gear Head Door Operator 2 HP 208V 3P with ECB and Nema4 modification

  • Extra heavy-duty industrial-type electric door operator for damp environments.
  • Worm gear reducer 40:1 ratio
  • #50 roller chain and sprockets from operator shaft to door shaft. (#60 chain optional)
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter (also called friction clutch)
  • Rotary type limit switches
    • .......more details
ME111-4WIRE-M-RH

Miller Edge 4-Wire Monitored Black Right Hand Outlet 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
    • .......more details
WorksheetInstallation manualSell sheet
SP-LMHNTG

LiftMaster Rearview Parking Access Hang Tag 25/pkg Special Coded **Must provide FC & Start #

  • Rearview mirror hanger gives access to gated facilities complexes for cars trucks and other vehicles
  • Can be used for larger vehicles with higher cabs as vans various trucks
  • 20-25 foot detection zone
  • Device is engineered for use with the LIftMaster LMSC1000 Long Range Vehicle Access-Card Reader
  • Simple transferrable item can be swapped out for rental cars different vans/trucks in a fleet dealer/loaner repair cars and more
  • Tags are sold in batches of 25. Your location may have a facility code. Check with your maintenance department or administrator if needed
    • .......more details
3SL-15R-HORIZ-12

Horizontal Track Set 3" SL 15" Radius 12'-0" Door (2 pcs)

  • Set of 2 horizontal tracks 13'-6" long 13g
041-0155-000

LiftMaster Safety Sensor Brackets 2021-Present

  • IMPORTANT NOTE: The new safety reversing sensor brackets are only compatible with the new safety reversing sensors (041-0136) and are NOT compatible with older style safety reversing sensors.
  • For safety reversing sensor brackets compatible with models pre-2021 refer to 041A5266-3.
88824

Marantec Sprocket Holder Assbly For Heavy Duty 1.2mm Belt Rails Only

  • Compatible with Marantec Heavy Duty (1.2mm - 18 gauge) 2-Piece & Standard Belt Rail
  • Compatible with Marantec models: LC1000 M4500 M4500e M4500eI M4700 M4700e M4700eI M4900e Q7500 Q7700 Q7900 Synergy 260 Synergy 270 Synergy 280 Synergy 360 Synergy 370 Synergy LC and Synergy Solo
  • Compatible with Marantec belt rails: M13-1207B M13-1208B M13-1210B M13-1212B. M13-1214B
LEVER091

Manaras Open Limit Actuator

CABLEKIT001

Manaras Comm. Receiver Antenna w/15' Coaxial Cable

5009-801-PAINT

Aluminum Touch Up Paint Nail Polish Style White / Blanc #801

  • Glass bottle and brush applicator
50-LW1000BLK

Loop Wire Black 1000ft 18AWG

WHITING-RV-INS

Whiting Stainless Steel Rivet/Mono Bolt Option for ColdSaver Door

  • Upgrade option
ME123-2M-BLK-RH

Miller Edge Black RH 2-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
1326-2-BLACK-PLEXI

Elton Commercial Window 2" thick 1326 Black Frame Sealed Plexi Glass

  • Screw together window kit
  • Frame size: 26-1/8" x 13-9/16" (Tip to Tip)
  • Cut-out size: 25-1/16" x 12-9/16"
  • Vision area: 23-7/16" x 10-13/16" Corner Cut 4" Radius
  • Different glass options and frame colours are available upon request
MC00001

Micanan Gear Reducer 45:1 (1/2 3/4 & 1HP)

  • For PRO-GH
K20-1075B-2TP

LiftMaster Electric Motor 3/4 HP 115/230V 1Ph L5 TEFC

  • Electric motor
  • Also known as: 20-1075B-2TP K20-1075B2T
MOD114A

Manaras Synthetic Oil Upgrade Only

  • This Upgrade Mod. is only available when purchaed with a compatible operator
  • Synthetic oil is placed in the operator's reducer for improved performance stability and decreased sensitivity to temperature variances
EHJW-353-3/4

Doorlec Industrial Jackshaft Op. Watertight ECB 3/4 HP 575V-3Ph

  • Equipped with: 3-btn control Adjustable Automatic Friction Clutch Emergency Chain Hoist and Heavy-Duty Solenoid Brake.
  • With DC-2000 controller
  • Watertight and Dust Tight EEMAC Type 4/12
ACP00922

Nortek LCD Display Assembly AE5/AE1K ***NLA***

  • Replacement screen only
AUXCON011

Auxiliary Contact Allen Bradley 1 NO/1 NC Size 0-5

  • Allen Bradley #595-AB
WHITING-ALUMCLAD

Whiting Special Order Aluminum Clad Roll Up Door Price by Quote Only

  • Special order to customer's specs
  • A prepainted aluminum facing added to plywood core dry freight door
  • Premium grade 7 ply 3/4” panels manufactured with a medium density overlay (MDO) laminated to smooth hardwood outer veneers of Transportation Core plywood all designed for optimum strength and appearance.
  • 2" track and rollers for durability.
  • Tongue and groove joint.
  • 2 cable balancer with independent spring for each cable. Springs treated with rust preventative.
    • .......more details
0220-1K-390

Heddolf 1-btn Overhead Compatible Remote 9 Dip Switch 390 MHz

  • Overhead compatible full-size transmitter
77

Whiting Steel Outside Cam Lock Black Standard

COMP-VILLERAY-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Overlay moldings positioned to create the Compact Villeray design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
HA-3001

Hose Anchor for Treadle Hose

  • Made of cast iron
E/1929/022

Automatic Systems Round Arm Ass'y 10' (BL229)

  • Used on the BL229 gate op.
K20-3075M-5-H25

LiftMaster Electric Motor 3/4 HP 575V 3P L5

  • Also known as: 20-3075B-5 2030755 K20-3075B5 K20-3075M-5
  • This is a replacement Motor Kit (3/4 HP 575V 3PH L5). For use with various LiftMaster® Logic 5.0 Commercial Door Operators.
  • Will also work on L3 L4 operators
MOTOR359

Manaras Electric Motor 1 HP 208/480V 3Ph

  • Continuous duty C-flange ODP 60Hz
K77-19130

LiftMaster Hardware Kit LA400 LA412

Q200

LiftMaster Chain Coupling Release K07-50215

  • For Liftmaster trolley operator HCT
029C98100

T-Style Complete Replacement Door White Stainless Steel Package 029C98100

  • Complete Replacement door size between 98" wide x 100" high
  • Painted white
  • Stainless steel package
  • Includes Vertical and Horizontal Track Operator assembly Hinges Rollers and Cable
  • Price varies according to size
JB-02

Miller Edge Junction Box Metal

  • For commercial overhead doors that use coil cords or retracting reels
  • Standard metal junction box with cover
  • Includes 1 x 90-degree connector 1 straight connector
  • Includes strain relief + 2 wire nuts + pop-out holes
  • For single-angle bottom bar of rolling steel door
  • Also compatible with sectional door
    • .......more details
15

Whiting Truck Door Center Hinge

M-0319

Autogate Groschopp Inline Motor 24V

K76-36681

Liftmaster Replacement Antenna for STAR1000

  • This is an antenna replacement kit for the PPWR & STAR 1000
SPR41B36X11/4

Sprocket 41B36 x 1-1/4" Bore 1/4" Keyway

  • Same as MD-00322
J505L5

LiftMaster Industrial-Duty Jackshaft 1/2 HP 575V 3Ph L5 ***Discontinued

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • J operators are attached to the door jackshaft to indirectly drive the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you
30004

Doorlec Brake Solenoid 460V with wire leads

WLMODULE002

Manaras Univ. Aux Output Module BOARD070

OSH-6813-ECB-LH

Manaras Opera-SH 3/4 HP 208V 1Ph with Electronic Circuit Board Left hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
SABLOP/12X

Automatic Systems Red LED Lighting Module for Arm

XBA15

NICE Aluminum Bar with 3M White Paint 69mm x 92mm x 3150mm

XBA13

NICE Rubber Impact Red Protection Strip 9M/Pkg

MP00069

Micanan Jackshaft w/Aux Trolley Assembly Mod. 7ft High Door #41 Trolley Drive Chain

  • Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
  • NOTE: Operator must be supplied with reverse limits
  • If purchasing for field install the limits on the operator would need to be reversed
729014

FAAC Manual Release Dial

K1A6408

LiftMaster APE Kit 24V

  • For use with various LiftMaster® Swing Gate and Slide Gate Operators
BEA-10-1311

BEA Adaptor Plate Kit for Widescan

1004-134-14'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 14 ft**Actual Length 14'2"***

  • For door thickness 1-3/4"
HSLG-121

Linear Commercial Slide Gate Operator 1 HP 230V 1 Ph - Heater not Included

  • Max duty cycle: Continuous
  • Integral APeX Controller
  • Double V-belt to chain reduction
  • #40 roller chain
  • Emergency manual disconnect handle
  • Powder coat finish
    • .......more details
MP-00072

Micanan Jackshaft with Auxiliary Trolley Assembly 14' High Door #41 Drive Chain

  • Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
  • Operator must be supplied with reversed limits
  • For models: PRO-J H HHD GH GHC
27020

Doorlec Electric Motor TEFC 1/3 HP 115/230V DC301

LIMIT017

Manaras Micro Limit Switch SPDT

  • CAP001 sold separately
K94-37848-1

LiftMaster Electric Motor 1HP

  • Replacement motor for SL595101U
MODKIT003

Manaras Time Delay Kit 1.5 Sec For Contactor Models

  • MODKIT003 for field upgrades
  • Order MOD003 when ordered in conjunction with a commercial operator
SETR2641AM2K

Erone 2-Channel Mini Transmitter Black 433MHz

  • Heavy-duty construction
  • Elegant & easy to carry
  • Unobstructed range: 656 ft (200m)
  • 60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
  • Two lithium batteries (CR2016) included
Wireless System Chart
PRO-4X_MOD_3HP

Micanan Nema 4X Modification 3HP

  • This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
  • For options M & U Micanan N-4X photocells are supplied
  • For 3HP motors
111854.0004

Overhead Logic Board 3/4 - 1 HP 208 460 3PH SX/HX UL

  • For RHX commercial ops. 3/4-1 Hp 3- phase operators
620-100990

Linear Heater Kit Assembly 230V Cage Style

  • Cage style heater is suited for large post mount operators (HSLG GSLG VS-GSLG SWG VS-SWG)
.331-334-R-C

Cut-to-Length Torsion Spring .331 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.319-6-R-C

Cut-to-Length Torsion Spring .319 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-600-Installed
.295-258-R-C

Cut-to-Length Torsion Spring .295 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
.295-134-L-C

Cut-to-Length Torsion Spring .295 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.225-2-L-C

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.225-134-L-C

Cut-to-Length Torsion Spring .225 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.218-134-L-C

Cut-to-Length Torsion Spring .218 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
PRO-HHD-5043U-R

Micanan 1/2HP 460V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 1/2 HP460V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation Manual (EN) Specification Sheet
PRO-HB-7538U-RH

Micanan 3/4HP 380V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
MK-00043

Micanan Overload Reset 1-Phase 15 Amps

MK-00228

Micanan Transformer 230V-24V-50VA

MM-00295

Micanan Wall Mounting Plate (Reducer 120)

TN33C

Wire Nuts (Marrette) Yellow 22-10 AWG 100/Pkg

  • Screw-on wire connector
  • Wire Range: 22-10 AWG
  • Rating: 105C (221F)
  • Voltage: 600V
  • Approval: CSA UL 486C Listed
MV-00003

Micanan 3-btn O/C/S Nema-1 Pushbutton Control Station

  • Surface mount
MK-00522

Micanan Relay 24 VAC 8-Pin Plug-In

HAML-MOUNTING-BRKT

GDI Side Mounting Bracket N/C When Ordered w/Operator

ME110-2W-BLK-E

Miller Edge 2-Wire Black End Outlet 7/8" wide x 3/4" high Sold by the Foot

  • Electromechanical slide in edge for counter shutters rolling doors and barrier arm applications.
  • Touch sensitive signaling allows for immediate stopping and reversing of motion.
  • Temperature range -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Worksheet
PRO-J-7553-U-LH

Micanan 3/4HP 575V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
PRO-J-7511-U-LH

Micanan 3/4HP 115V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
PRO-GT-10043-U

Micanan 1HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

.406-6-R

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Blue/Yellow

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
PRO-TB-10023-U

Micanan 1 HP 230V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 & 1 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-TB-10081-U

Micanan 1 HP 208V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 & 1 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
60-7248-CBI29

Wheel Chock Safety Pkg incl'd: cast ductile iron wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) CBI-29 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • Made from Cast Ductile Iron for Impressive Strength
  • Painted Blue for good Visibility
  • Completely Reversible for Simple Use
  • Size: 8" wide x 12" long x 9" high
60-7248-IC10

Wheel Chock Safety Pkg incl'd: yellow formed steel chock w "tooth" like bottom wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) IC-10 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • "Tooth" Like Bottom Grips Icy/Slippery Ground Surface
  • Powder Coated Yellow for High Visibility
  • Formed Steel
  • Size: 8" wide x10-1/2" long x 9-1/4" high
42GRR-9001

Allen Bradley Series 9000 Photoelectric Sensor Thru-Beam Receiver Unit

  • nput: 20-40VAC 10-55VDC 4VA