Devanco Canada - Get The Right Garage Door Opener‎ and Parts

684-33-110

Universal Bracket 2.25" x 2.5" x 48" w/ Plate 4"x12"

WHITING-PLATE-DR

Whiting Special Order Premium Plate Roll Up Door Price by Quote Only

PremiumPlate Roll-up door offers an alternative to plywood.
Polyethelene (PE) composite panels are bonded to prepainted high-tensile steel faces for a durable high impact surfaces.
Tongue and groove joint.
2 cable balancer with independent spring for each cable. Springs treated with rust preventative.
5 rows of hinges.
Patented roller-change hinge design.
2" track and 2" steel rollers for durability.
Rigid Bottom U-channel with replaceable seal.
Stainless steel rivets.
All door hardware E-COATED.(Automotive quality corrosion protection).

111421.0003

Overhead Limit Module RSX

106-0005

Rodent Block Pull Chain Seal 2"

Often overlooked and left unprotected the opening for the pull chain on dock levelers is an ideal entry point for mice and rats.
The chain provides a built-in ladder for pests and the chain opening is more than big enough for rats or mice to squeeze through.
Features solid cast aluminum construction easy to install and completely cover the chain opening.
The seals are designed to sit completely below the surface of the dock plate and will not interfere with material handling equipment.

GH-383-3/4

Doorlec Industrial Jackshaft Door Operator 3/4 HP 208V 3P with ECB

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

CP-MO-12-115/1

Lynx Electric Motor 1/2 HP 115V 1 Ph *** NLA

Electric motor only

14211

Doorlec Solenoid-Brake Lever Upper

Fits model LJH

MGH-6536-ECB-RH

Manaras 2 HP 600V 3P Jackshaft ECB Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

MOTOR350-WIRED

Manaras Electric Motor 1 HP 120/240V 1Ph Wired

Continuous duty C-flange ODP 60Hz

IRB-325-HD

EMX Industries Steel Protective Hoods Only Grey Powder Coat Set of 2

Protective Hoods for the Thru-Beam Photo Eye System (Item #IRB-325) by EMX
Easily installed using the existing mounting holes of the Photo Eye
Constructed of zinc plated steel
Grey powder-coated finish
9" x 3"

LMLEVPACK-SN

LiftMaster Yale Smart Keypad Lever Satin Nickel Finish Includes 821LMC ***No Longer Available

Smartphone Control – Pair with included Lock Wi-Fi® Bridge to securely lock unlock and view door activity in the myQ® App.
Illuminated Keypad: Easily enter your code using the backlit keypad.
Brings Keyless entry to doors with no deadbolt
Key Free – No key hole means no lock picking or keys to lose.
9V Battery Back-Up – Never worry about getting locked out due to dead batteries.
Works with Key by Amazon to provide a seamless delivery experience.

.......more details

Programming instructions Sell sheet

ME113-C7

Miller Edge PVC Mounting Channel Flat Sold by the Foot

OVIEW-IBT4

NICE Handheld Oview Display Programmer with IBT4 Interface Module OVIEW/A

Required for programming barrier gates

PANORAMIC-FV

Garex Ready to Install Door Special Order

Aluminum Full View door - Factory frame and rail colours are Anodized White and Black - Custom colours can be factory painted - Multiple single pane or insulated glass styles are availavle such as clear tempered tinted frosted gluechip etc - Multiple hardware configurations are available to accomodate site requirements

LOTBINIERE-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings positioned to create the Lotbiniere design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

SEIGN-TRAD-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings can be custom positioned to create the square or rectangle desired look - Moldings are factory white or can be painted to match door colour - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

URBAN-R12

Garex Ready to Install Door Special Order

R12 Insulation - Woodgrain with 1 narrow shadow line at the top and bottom of each panel - Available in steel white or black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements

WHTG-COLDSAVER

Whiting Special Order ColdSaver Door ** POR

Special order to customer's specs
2-1/8” thick panels built with aluminum facings inside and out for easy cleaning and excellent acceptance of paint and decals.
No rivets on face of door to interfere with lettering or decals.
Aluminum extruded panels .070” thick resist puncture.
Foam-in-place urethane insulation.
Panel joints are double sealed.

.......more details

20449R

Genie Chain Glide Rear Housing Cover

Compatible with models: PCG400 PCG450 PCG500ML PCG600 PCG700ML PCG700FN GCG350L GCG350ML H2000C 1020L 2020L
Contains gear housing cover only

C-24X12-134-LEXBLK

Thermal Window 24" x 12" for 1-3/4" Door Lexan Black *** Special Order by Quote Only

For 1-3/4" thick door
Glass type: Polycarbonate (Lexan)

MGR20-Y-2R-04

Miller Edge Sensing Edge Round Yellow 2-Wire Right Hand Outlet 4ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

41ASWG-489

LiftMaster Cable Repl. Kit 24V 3m with Connector

For use with LiftMaster® Model LA400 Series Commercial Swing Gate Operators

41D0216-2

LiftMaster End Panel with Light Socket

Compatible with LiftMaster® 8550WL & 8360WL Models; and various garage door openers manufactured after 2017 only
Circuit board not included

K75-13074

LiftMaster Straight and Curved Door Arm Kit APT

Compatible with LiftMaster® Model APT trolley Operator

21001

Limit Switch Micro

MGR20-B-2U-PER-FT

Miller Edge Sensing Edge Round Black 2-Wire Universal Outlet Sold Per Foot

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
Non-monitored edge
Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)

MD-00338

Sprocket 40B15 1" Bore 1/4" KW 2SS

15 tooth sprocket for #40 chain

902-T-7X9-VL

Hardware Set 3" Industrial 902-T for 7' x 9' VL

A variety of options and sizes are available call for quote
Set includes tracks HD rollers hinges solid shaft drums cables springs and struts if applicable.

112357.0001

Overhead Logic Board for RSX 3/4 & 1HP 1PH

Fits OPRSXH75015BR GCL-H

RELAY008

Manaras Relay AB 700-HA33A24 11 Pin TP

Allen Bradley

2996

Truck Door 2" Steel Roller 3" Stem Enclosed Bearings for Whiting Roll-Up Doors

A Whiting original

OPH-6212-ECB-LH

Manaras Opera-H 1/2HP 240V 1Ph with Electronic Circuit Board Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

PRO-GH-15011U-LH

Micanan 1.5 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

41C2760

LiftMaster Chain and Cable Kit 8'

Also known as: 1C2760 41C2760 41C2760-1
One piece 8 ft. chain and cable replacement kit installed on 8ft garage door

GHX-6432-CONT-LH

Manaras Explosion Proof Gear Head 1/2HP 480V-3P Contactor Left Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station

H6NA12

Richards-Wilcox Hinge 6NA x 12 Gauge Roller Bracket

Galvanized 12 gauge hinge

TRACK-SET-2STD-14

2" Tracks Set 14'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

TRACK-SET-2STD-10

2" Tracks Set 10'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

G3243

GDI Battery Backup Option G3243

BBU option if AC power is lost

2100-564

Linear Clutch Disk Facing HSL HSLG

SF375-W

Spring Fitting 3-3/4" Winding Side Only

Universal thread for use in either LH or RH wound springs.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
Winding bar hole 5/8"

10-10191-GR

LiftMaster Brake Disc

For various Liftmaster commercial slide door operators
Also known as: 10-10191-GR 10-10191-GR 1010191 G105209 10-10191 105209

MGH-6435-ECB-RH

Manaras 1.5 HP 480V 3P Jackshaft with Elect. Circuit Board Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

26CW14522-CUT

Truck Door Intermediate Panel (12" x Cut-To-Size) Painted White for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

BEARING006

Manaras Flange Sealed Bearing 5/8"

Flange sealed bearing for 5/8" shaft

P-75

End Plug for 3/4" ID Rubber Hose

Sold per plug

30005

Doorlec Brake Solenoid 208V with wire leads

MT22-GRAY-RH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot Gray

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

CP-BRK-WALL

Lynx Wall Bracket Commercial Operators

L-14-50-0-D

Cable Tie Standard 50 LB Black 14" Nylon 500/pkg

Ultraviolet Resistant
Length: 14.56" / Width: .180" / Thickness: .052" / Diameter: 4.125"
Low insertion and pull through force
Advanced pawl and teeth design
Angled tail provides quicker initial insertion alignment
Tail finger grips allow easier handling and tightening

.......more details

K72-12789

LiftMaster Hand Chain Shaft Kit GH (1/2 - 2HP)

Complete with: Bevel Gear 3/4" ID Hand Chain Guice Hand Chain Shaft Bearing 3/4" ID Nyliner Bearing Compression Spring Chain Wheel Washers Roll Pins and E-Rings

VPL-12

Autogate 12V Motor

H-0166

Autogate VBelt Banded B-59

New Style Double Reduction

41D8859

LiftMaster Cover 8550WL WLED

Burgundy Replacement Cover.
This one piece cover is compatible with various LiftMaster® Lock Capable Garage Door Openers Powered by myQ®; manufactured after 2017

SCLUTCHSHAFTN4

Micanan Complete Clutch Shaft Assy for PRO-HW

31103

Doorlec Sprocket 41B36. KW/SS 1"

CGH751L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod. 3/4HP 115/230V 1P L5 - Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

K74-30763

LiftMaster Plug-In Transformer 120VAC ****Discontinued Use APOW3

120VAC 50-60Hz 36VDC 1.1A Output
Used on the LA400
Discontinued in 2018 use APOW3 instead

C-6X48-134-BLK

Thermal Window 6" x 48" for 1-3/4" Door Black

For 1-3/4" thick door

PRO-GHC-10053U-R

Micanan 1 HP 575V 3P Gearhead Operator with N1 Eyes Monitored ECB Right Hand

External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation
Full function Smart 10.0 logic board and on-board receiver

.......more details

MOUNTSHAFT017

Manaras Clutch Shaft Kit for MTH MTBH (no pulley) Old Pre-1998

Input / clutch shaft kit for MTH MTBH
For old MTH MTBH with 1" diameter input shaft no pulley included

1005-1-3/8-8'

Aluminum Bottom Retainer U-Shaped 8' Long

For door thickness 1-3/8"

IRB-TX

EMX Industries Transmitter Board Only for IRB-4X *** NLA

AVP-1

Ace Type Keyswitch with Aluminum Mounting Plate

Zinc Alloy Die Casted housing and Cylindrical Chrome Plated
Tubular key with 2 keys
60 Combinations Available
Spring Return Type
Recommended for multiple dwellings
Contact ratings: 4 A 125V AC 2A 250V AC

.......more details

93D341

LiftMaster Cover Only Silver for EL25

Also known as 041D0341 41D341
Replacement cover for EL25

.363-6-R-C

Cut-to-Length Torsion Spring .362 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.331-514-L-C

Cut-to-Length Torsion Spring .331 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-514-INSTALLED
For spring filler use part no. SPRING-FILLER

.319-6-L-C

Cut-to-Length Torsion Spring .319 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-600-Installed

.319-514-L-C

Cut-to-Length Torsion Spring .319 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-514-Installed

.312-514-L-C

Cut-to-Length Torsion Spring .312 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.295-2-L-C

Cut-to-Length Torsion Spring .295 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.218-258-L-C

Cut-to-Length Torsion Spring .218 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.207-134-R-C

Cut-to-Length Torsion Spring .207 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

PRO-GH-5053U-L

Micanan 1/2HP 575V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-GH-5021U-R

Micanan 1/2HP 230V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand (PRO GHE)

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-HB-7538U-LH

Micanan 3/4HP 380V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

PRO-HB-7581U-LH

Micanan 3/4HP 208V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

PRO-HB-5043U-LH

Micanan 1/2HP 460V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

PRO-HB-5083U-RH

Micanan 1/2HP 208V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-HB-5081U-RH

Micanan 1/2HP 208V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-HB-5021U-LH

Micanan 1/2HP 230V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

CLIP020

Manaras Pocketwheel Roller Clip

PRO-H-5053-E-LH

Micanan 1/2HP 575V 3P Hoist Operator NM ECB No Eyes Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes

PRO-H-5023-U-LH

Micanan 1/2HP 230V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

PRO-H-5021-U-LH

Micanan 1/2HP 230V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

PRO-H-5081-U-RH

Micanan 1/2HP 208V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters