Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search rbh501l5
MOUNTSHAFT001A

Manaras Clutch Shaft Kit for MJH

  • Input / clutch shaft kit for MJH built after 1999
Drawing
MOUNTSHAFT001

Manaras Clutch Shaft Kit for MJH (pre-1998)

  • Input / clutch shaft kit for MJH models up to mid-1998
  • Kit includes V-belt 4L360 to fit with newer deeper pulley
  • For MJH built after 1999 use MOUNTSHAFT001A
Drawing
VBELT_5L350

Manaras VBelt 5L 35" - repl. by B32

  • Used on MTH MTBH MSL models
  • Type B
  • Inside length 32 inches
TRANSF088

Manaras Transformer 480-24V 40VA

  • Transformer 480V Primary 24V Secondary 40VA
VBELT_4L340

Manaras VBelt 4L 34" - repl. by A32

  • Used on MTH/MTBH APE APT models
  • Same as Doorlec 19030
LIMIT024

Manaras Double Snap-Action Limit Switch with Flat Lever

  • Replacement for LIMIT003
  • 2x SPDT - Unimax
  • Same as Doorlec # 21702
Limit Switch Chart
LIMIT025

Manaras Single Snap-Action Limit Switch with Flat Lever

  • Replacement for LIMIT001
  • For all Manaras commercial operators prior to 2000 - except light duty models
  • Can be used on Doorlec Lynx and others
  • Unimax (SPDT)
Limit Switch Chart
LIMIT018

Manaras Double Limit Switch without Lever

  • Double limit switch (DPDT) - Cherry
  • The extra contact is used to control auxiliary equipment
  • Applies to all current operators
Limit Switch Chart
TIMER031

Manaras Timer 24/240V 1s-100h *** To Extent of Inventory

  • This timer-to-close can be added to any Commercial garage door opener.
  • Use with RELAY022 (8-pin base) if required.
  • Schneider Elect. part no. RE88867215
Adding a timer
DRUM006

Manaras Steel Brake Drum Flat Track - replaces DRUM001

  • Replaces DRUM001
  • Brake drum for all operators except Gear Head models prior to 1999.
  • Use with BRAKEPART018
DISCONNECT001

Manaras Floor Level Disconnect Lever

DOORARM001

Manaras Door Lifting Arm Assembly

  • Complete door arm assembly for all Manaras trolley operators.
RADIO-KIT005

Manaras plug-in receiver for Board 60 or electromechanical operators 390 MHz *** To extent of inventory

  • Direct ECB plug-in receiver card kit (RADIO RE100B) for on-site installation.
  • Maximum 16 transmitters per receiver.
RADIO-RE101C

Manaras Factory Installed Mod plug-in receiver for Board 70 operators 390 MHz

  • Direct ECB plug-in receiver card (factory installed)
  • 16 transmitters maximun per receiver.
  • Use part # RADIO-KIT004 when adding or replacing on-site.
  • This is now standard equipment on all Circuit board operators
RADIO-31

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 4/12 313 MHz *** Repl. by RADIO-RE901B

  • 3-Channel O/C/S receiver controls one operator with MCT series transmitters.
  • Steel Nema 4 enclosure.
  • 24 VAC input voltage.
  • 2 N/O and one N/C relay
  • Commercial antenna Included (Radio029).
Programming Instructions - ECBProgramming Instructions - CONT
RADIO-50

Manaras MCT-32 3-btn O/C/S transmitter 32 doors 313 MHz ** Replaced by RADIO-EM932

  • Open/Close/Stop remote for 32 doors.
  • By selecting A B C or D on the rotary switch and 1 to 8 on the other you can operate any of the 32 doors.
  • Comes with LED battery life indicator and 9V battery.
  • Can be wall or post mounted.
  • Must be used with 32 MCR series receivers.
Programming Instructions
RADIO-37

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 1 313 MHz ** To extent of Inventory

  • 3-Channel O/C/S receiver controls one operator with MCT series transmitters.
  • Steel Nema 1 enclosure.
  • 24 VAC input voltage.
  • 2 N/O and one N/C relay
  • Commercial antenna Included (Radio029).
  • Replaced by RADIO-RE900A
    • .......more details
Programming Instructions - ECBProgramming Instructions - CONT
RADIO-47

Manaras MCT-1 3-btn O/C/S transmitter 1 door **Replaced by RADIO-EM932

  • Open/Close/Stop remote for 1 door
  • Comes with LED battery life indicator
  • 9V battery included
  • Can be wall or post mounted
  • Must be used with MCR series receivers
Programming Instructions
RADIO-29

Manaras Commercial Receiver Antenna

  • Commercial receiver coaxil antenna
CABLE-15

Manaras 15ft coax cable extension with BNC connectors

  • Used on Radio-15 to extend antenna
2705.162_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

  • Most common torsion spring for cube trucks
  • Specs: .162 x 2-3/16" x 18" Long
  • For Roadside order part # 2704.162*180
8331.96

Whiting Brush Top Seal assembly 96"

  • Fits Coldsaver and Tempguard
2234.596

Whiting Coldsaver Bottom Panel 13-1/2" x Max 96" with lock seal and retainer ** Cut to Length

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
  • Includes Lock and keeper
2234.296

Whiting Coldsaver Bottom Panel 12-1/2" x Max 96" with lock seal and retainer ** Cut to Length

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
  • Includes Lock and keeper
2235.096

Whiting Coldsaver Bottom Panel 14-1/2" x 96" with seal and retainer

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
2234.096

Whiting Coldsaver Bottom Panel 12-1/2" x Max 96" with seal and retainer ** Cut to Length

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
2238.096

Whiting Coldsaver Intermediate Panel 14-1/2" x 96"

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
2237.096

Whiting Coldsaver Intermediate Panel 13-1/2" x 96"

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
308302

Linear 2-Channel Multi-Code Key Ring Transmitter 310 MHz

  • Open/Close remote for 2 doors
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 codes for each channel (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
108210

Linear 1-Channel Multi-Code Key Ring Transmitter 310 MHz

  • Open/Close mini remote for 1 door
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
109710

Linear 4-Channel Multi-Code Visor Transmitter 310 MHz

  • Open/Close remote for 4 doors
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 9-volt battery
  • Codes: 512 per channel (set by dip switches)
    • .......more details
Programming Instructions
2236.096

Whiting Coldsaver Intermediate Panel 12-1/2" x 96"

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
1336.4

Whiting Roadside Top Panel Closure Bracket for 8" radius track

9931T

Allstar 1-btn Transmitter 108787 318 MHz ***Replaced by P-9931T

  • Compatible with Allstar and MVP receivers
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 19683 (set by nine trinary dip switches)
  • RF frequency: 318 MHz
  • Dimensions: 2.25" W x 4.625" H x 1" D Order number: 190-108787
    • .......more details
Programming Instructions
1336.1

Whiting Curbside Top Panel Closure Bracket for 10" radius

MCT-11

Linear 1-btn MegaCode Transmitter 318 MHz

  • Activates one 318 MHz MegaCode receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Two CR2032 batteries included
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 3" W x 1.875" H x .625" D
    • .......more details
Programming Instructions
41A2816

Jobber Drive Gear for Chamberlain Sears LiftMaster residential operators

  • Drive gear for Chamberlain / LiftMaster / Sears residential garage door openers built 1984 +
  • This is an excellent quality aftermarket product
HAE00032

Linear 8ft Chain Assembly (HCT8)

HAE00014

Linear Pulley and Bracket - Chain (HCT)

HAE00049

Linear Drive Sprocket Holder and Belt Clamp

HAE00033

Linear 8ft Belt & Inner Slide Assembly (HBT8)

218954-03

Linear Pulley & Bracket Assembly - Belt (HBT)

HAE00022

Linear Inner Slide Assembly - Belt (HBT)

220499

Linear Drive Sprocket - Belt (HBT)

220205-02

Linear Complete Hardware Kit for LDO LSO LCO

  • Includes all the hardware needed to install the operator in its entirety.
  • Includes the rail hardware (door bracket and header bracket) and hardware for installing the safety beams.
HAE00004

Linear Limit Switch Assembly

  • For LSO LDO LCO
HAE00047

Linear Complete Gear Set with Grease

  • Set includes: Helical gear worm gears and grease
  • Helical gear measures 2-7/8" diameter
219109

Capacitor 1/3 HP 43-53 MFD 250V

  • For LDO33 only
1920.1

Whiting Stainless Steel Top Closure Mounting Plate for Insulated Doors

1336.8

Whiting Stainless Steel Roadside Top Closure Bracket for 8" radius

1336.7

Whiting Stainless Steel Curbside Top Closure Bracket for 8" radius

1336.6

Whiting Stainless Steel Roadside Top Closure Bracket for 10" radius

1336.5

Whiting Stainless Steel Curbside Top Closure Bracket for 10" radius

7953

Whiting Truck Door Hinge Gasket White

7176.225_31.910

Whiting Heavy Duty Torsion Assembly .225 x 31" shaft 91"

1001-14-GREY

Commercial Side & Top Weather-Strip 14' Long - Grey

  • Aluminum retainer with grey dual-fin vinyl
  • Sold by full case quantity (10)
RV-300

3" Vinyl Insert for Brush Retainer per foot

  • Color: Black
RV-200

2" Vinyl Insert for Brush Retainer per foot

  • Color: Black
100BL

1" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1701
4009-12FT

Aluminum Retainer only for Light Brush 12' Long Reverse Angle

  • For reverse angle rolling steel doors.
  • For use with Light Brush or Vinyl Insert.
4004-16FT

Aluminum Retainer only for Heavy Brush 16' Long 45 degree

  • For angle application (45 degree)
  • For use with Heavy Brush
4005-8FT

Aluminum Retainer only for Heavy Brush 8' Long 180 degree

  • For angle application (180 degree)
  • For use with Heavy Brush
4007-12FT

Aluminum Retainer only for Light Brush 90 degree**Actual Length 12'2"

  • For angle application
  • For use with Light Brush or Vinyl Insert.
  • die # A-25060
4007-8FT

Aluminum Retainer only for Light Brush 90 degree

  • For angle application
  • For use with Light Brush or Vinyl Insert.
4006-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
4001-12FT

Aluminum Retainer only for Light Brush 12' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
1003-5"-YELLOW

Bottom U-Rubber 5" Yellow 150' Long

  • 5" yellow vinyl insert 150ft spool.
1003-3"-YELLOW

Bottom U-Rubber 3" Yellow 200' Long

  • 3" yellow vinyl insert 200ft spool.
1003-5"-150FT

Bottom U-Rubber 5" Black 150' Long

  • 150ft spool of vinyl insert.
1003-3"-200FT

Bottom U-Rubber 3" Black 200' Long

  • 200ft spool of vinyl insert.
1016-ADHESIVE

Adhesive for Storm Shield 6oz tube

  • For use with 1016
Safety data sheet
1019-1-3/8-24'

Rigid Vinyl Bottom Retainer Flat 24' Long

  • Black - for door thickness of 1-3/8"
1019-1-3/8-16'

Rigid Vinyl Bottom Retainer Flat 16' Long

  • Black - for door thickness of 1-3/8"
1019-1-3/8-12'

Rigid Vinyl Bottom Retainer Flat 12' Long

  • Black - for door thickness of 1-3/8"
1019-1-3/8-14'

Rigid Vinyl Bottom Retainer Flat 14' Long

  • Black - for door thickness of 1-3/8"
1019-1-3/8-10'

Rigid Vinyl Bottom Retainer Flat 10' Long

  • Black - for door thickness of 1-3/8"
1014-1-5/8-24'

Rigid Vinyl Bottom Retainer Notched 24' Long

  • Black - for door thickness of 1-5/8"
1014-1-5/8-16'

Rigid Vinyl Bottom Retainer Notched 16' Long

  • Black - for door thickness of 1-5/8"
1014-1-5/8-14'

Rigid Vinyl Bottom Retainer Notched 14' Long

  • Black - for door thickness of 1-5/8"
1014-1-5/8-8'

Rigid Vinyl Bottom Retainer Notched 8' Long

  • Black - for door thickness of 1-5/8"
1014-1-5/8-10'

Rigid Vinyl Bottom Retainer Notched 10' Long

  • Black - for door thickness of 1-5/8"
1015-1-3/4-24'

Rigid Vinyl Bottom Retainer Raised Centre 24' Long

  • Black - for door thickness of 1-3/4"
1015-1-3/4-14'

Rigid Vinyl Bottom Retainer Raised Centre 14' Long

  • Black - for door thickness of 1-3/4"
1015-1-3/4-16'

Rigid Vinyl Bottom Retainer Raised Centre 16' Long

  • Black - for door thickness of 1-3/4"
1015-1-3/4-12'

Rigid Vinyl Bottom Retainer Raised Centre 12' Long

  • Black - for door thickness of 1-3/4"
1015-1-3/4-8'

Rigid Vinyl Bottom Retainer Raised Centre 8' Long

  • Black - for door thickness of 1-3/4"
1006-2-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1006-2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1006-1-3/8-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/8"
1006-1-3/8-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/8"
1006-1-3/8-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/8"
1006-1-3/4-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/4"
1006-1-3/4-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/4"
1006-1-1/2-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1006-1-1/2-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1005-1-3/4-24'

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4"
1005-1-3/4-16'

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4" • DIE # ES18191
1005-1-1/2-16'

Aluminum Bottom Retainer U-Shaped 16' Long

  • For door thickness 1-1/2"
1004-2-24'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 24 ft***Actual Length 24'4"***

  • For door thickness 2"
1003-2-10'

Aluminum Bottom Retainer L-Shaped 10' Long

  • For 2" thick doors.