Devanco Canada - Get The Right Garage Door Opener‎ and Parts

25-60652

Truck Door Reefer Bottom Roller Bracket Assembly for Whiting Style Doors ** To Extent of Inventory

Steel construction Black E-coat finish
Consist of roller clamp wear plate stud plate and 5/16" lock nuts
Stainless steel studs and nuts
Cross ref: 5600

41C2735

LiftMaster Chain and Cable Assembly CMC84

Fits a Sears Craftman CMC84 operator

MOD060-14FT

Manaras Auxiliary Trolley #41 Chain Modification Only

Provides drawbar operation of a standard lift door with the use of a jackshaft operator
Includes tracks for doors up to 12' high. Additional fee for over 12'
Maximum door width 22'

.319_6"-RH

Torsion Spring .319 x 6" x 12ft RH Blue/Green

Wire size: .319
Inside diameter: 6"
Length: 12 ft

1102-16-BLACK

Commercial Side & Top Weather-Strip 16' Long - Black

Aluminum retainer with black heavy-duty dual fin vinyl.

BK307

Jamb bracket J-07 #7 12 gauge

Sold by the piece
Height 3.75" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

SPRAY-431

Aluminum Touch Up Spray Paint 350g Bright White / Blanc Pur #431

350g
Replaces Gentek #801

1003-1-5/8-14'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

MW-00021

Micanan Splash Proof Cover Fully Assembled

Splash proof cover for models: PRO-H J HHD GH and GHC
Same as MP-00204

GAREX-W/STRIP

Garex Hybrid Weatherstrip Special Order

specify size color details when ordering
Please call for pricing

OPJ-6233-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 208V 3 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

COUPLING002

Manaras Disconnect Coupling for MJH ** NLA Sold in Kit only** Use MOUNTSHAFT010 or 010A **

If MJH is manufactured prior to 1998 4 x PIN016 are required
If MJH is manufactured after 1998 2 x PIN016 are required
PIN016 sold separately

MV-00278

Micanan Cutler Hammer Reflective Photocell Kit 24V 0-25ft Range w/Brackets (MK00371/MV00371) *** No Longer Available. Use 60-2728 instead

Includes eye reflector and bracket
Same as MK00371 Eaton 1450E-6514

MGH-6214-ECB-RH

Manaras 1 HP 240V 1P Jackshaft with Elect. Circuit Board Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

CP-MO-12R-115/1

Lynx Electric Motor Emerson 1/2 hp 120V Instant Reverse 6 Wire *** NLA

Replaces the 4 wire AO Smith electric motor

H753L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 208/230/460V 3P Logic 5 Left Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

BK000

Residential Top Bracket Adjustable 1-Bolt Sold per Piece

Same as part number 3-31-1
Sold per piece - not a pair

PRO-J-10011-U-LH

Micanan 1HP 115V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

25-42-80

Extension Spring 7' Door - 80 lbs Gold

Double - Loop
25" long 42" stretch 80 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

MH00027

Micanan Collar 1/2" ID

2234.096

Whiting Coldsaver Bottom Panel 12-1/2" x Max 96" with seal and retainer ** Cut to Length

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

HRB-8

High Riser Bracket for 7" Above Dock or Higher 8"

High Riser 8" Riser Bracket for 7" Above Dock Door or Higher
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

MB-05507

Micanan Electric Motor Only 1 HP 230/460V 3PH Base Mount TEFC FR56

PRO-GT-7581-U

Micanan 3/4HP 208V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

.363-334-L

Cut-to-Length Torsion Spring .362 x 3-3/4" Left Hand Wound Green/White

Priced per inch - cones sold separately
For factory installed cones use part no. C-375-INSTALLED

OHJ-6232-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 208V 3 Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

Installation Manual Sell Sheet

GALV-225-2-L

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Galvanized Ornage/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-225-2-R

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Galvanized Orange/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

SETR2641AM2KP

Erone 2-Channel Mini Transmitter with Paradox Tag Black 433MHz

With built-in Paradox tag
Heavy-duty construction
Elegant & easy to carry
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

.......more details

K07-3611

LiftMaster Disconnect Bushing

Compatible with LiftMaster® SL590 Slide Gate Operators

E/0172/166

Automatic Systems Spring Assembly

BEA-10BODYGUARD-T

BEA Automatic Overhead Pedestrian Swing Door Sensor

Designed to provide threshold protection during the open state
Prevents a closed door from opening and an open door from closing when a person is in the detection zone.
Adjustments can be made with the BEA remote.
Installation height: 9' max (6'6" to 8' recommended)
Operating temperature: -22 F to 140F
Immune to electrical and radio frequency interference

.......more details

K72-12532

LiftMaster Output Shaft Kit J

Also known as: 308116010J 310-116010J 308116010JK 310116010J
Compatible with LiftMaster® Model J Commercial Door Operators

41D3485

LiftMaster Chain Kit 10'

For use with various chain drive garage door openers that utilize a T-rail and have a 10' garage door
Same as 041D3485

10BOX45RNDSM

4.5" Round Surface Mount Box

4.5 inch round surface-mount box for 4.5 inch round push plates.

CAPXSTK

LiftMaster Trim Kit for CAPXS

Trim plate exclusively for installing with Model CAPXS – Smart Video Intercom S
Provides a clean aesthetic installation helping hide remnants of a previous installation.

2200-983-UPS

Linear Brake and Puck Assembly UPS HSLG

OSH-6434-M-N1-LH

Manaras Opera-SH 1 HP 480V 3 Ph Monitored Board w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

50018

Doorlec Photo Switch Polarized Explosion Proof Reflective w/Round Reflector

Class 1 Div 1 Groupes CDEFG explosion proof Certified CSA

GHX-353-1HP-RH

Doorlec Explosion Proof Gear Head 1 HP 575V 3PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

PRO-GH-10023U-R

Micanan 1 HP 230V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

158176

Set Screw 3/8-16-1 Cup Point Zinc Plated Red Head

K005-KEY

Replacement Key for 3BXLT Key #5

Replacement key only for key #K005

SPR410B12X5/8

Sprocket 410B12 x 5/8 K3/16 2S1/4-20

5-38-11

2" Horizontal Track Set 9'6" (8ft Door) 10" Radius 16ga 2-pcs

Left/Right hand horizontal track set 10" radius
Garage Door Residential usage

MA035RDOT

LiftMaster 9ft Square PVC Barrier Arm Only (Articulating Hardware NOT included)

9' Square Arm
PVC
Red & White Retro-Reflectorized DOT Tape
Hardware NOT included

OSH-6232-M-N1-RH

Manaras Opera-SH 1/2 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

MQ00020

Micanan Spring Pin 3/16" x 1-3/4" Long

MD-00242

Sprocket 41B14 x 3/4"

MQ00002

Micanan Cotter Pin 1/8" x 2.5" Long

OPH-6214-M-N1-RH

Manaras Opera-H 1 HP 240V 1Ph with Monitored Board and N1 Photoeyes

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

19-50ML-SS

Master Link #50 Stainless Steel

OSH-6214-M-N1-RH

Manaras Opera-SH 1 HP 240V 1 Ph Monitored w/N1 Eyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

MA005C

LiftMaster Slip Clutch Option Mega Arm

This is a replacement slip clutch option for Mega Arm gearbox

178B45

LiftMaster Curved Door Arm (K10-10203)

Also known as: 1010203 105004 10-10203 K10-10203
For use with various LiftMaster® Medium Duty Commercial Door Operators

SHAFT028

Manaras FDGHE Cam Shaft 5/8"-18

041C0010

LiftMaster Chain Spreader 3/4hp

For use with various LiftMaster® and Chamberlain® 3/4 HP Chain Drive Garage Door Openers

GALV-250-2-R

Cut-to-Length Torsion Spring .250 x 2" Right Hand Wound Galvanized Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

N4GH205L5-RH

LiftMaster Gearhead wi/Watertight/Oiltight Mod. and Brake 2 HP 575V 3-Phase Logic 5

N4 (M103) modification installed on operator Watertight Oiltight Dust-tight with Nickel-plated chain and Dynamic brake.
Comes with CPS-UN4 photo eyes

GALV-375-334-144-R

Torsion Spring .375 x 3-3/4" x 12ft RH Galvanized Yellow/Green

Wire size: .375
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-375-334-144-L

Torsion Spring .375 x 3-3/4" x 12ft LH Galvanized Yellow/Green

Wire size: .375
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-343-258-144-R

Torsion Spring .343 x 2-5/8" x 12ft RH Galvanized Blue/Red

Wire size: .343
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

GALV-331-334-144-R

Torsion Spring .331 x 3-3/4" x 12ft RH Galvanized Red/White

Wire size: .331
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-331-334-144-L

Torsion Spring .331 x 3-3/4" x 12ft LH Galvanized Red/White

Wire size: .331
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-319-334-144-R

Torsion Spring .319 x 3-3/4" x 12ft RH Galvanized Blue/Green

Wire size: .319
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-319-258-144-L

Torsion Spring .319 x 2-5/8" x 12ft LH Galvanized Blue/Green

Wire size: .319
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

GALV-312-258-144-L

Torsion Spring .312 x 2-5/8" x 12ft LH Galvanized Yellow

Wire size: .312
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

GALV-312-258-144-R

Torsion Spring .312 x 2-5/8" x 12ft RH Galvanized Yellow

Wire size: .312
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

GALV-306-258-144-R

Torsion Spring .306 x 2-5/8" x 12ft RH Galvanized Red

Wire size: .306
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-295-258-144-L

Torsion Spring .295 x 2-5/8" x 12ft LH Galvanized Blue

Wire size: .295
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-295-258-144-R

Torsion Spring .295 x 2-5/8" x 12ft RH Galvanized Blue

Wire size: .295
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-283-258-144-L

Torsion Spring .283 x 2-5/8" x 12ft LH Galvanized White

Wire size: .283
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-283-258-144-R

Torsion Spring .283 x 2-5/8" x 12ft RH Galvanized White

Wire size: .283
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-283-2-144-L

Torsion Spring .283 x 2" x 12ft LH Galvanized White

Wire size: .283
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-273-334-144-R

Torsion Spring .273 x 3-3/4" x 12ft RH Galvanized Orange/Red

Wire size: .273
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-262-334-144-L

Torsion Spring .262 x 3-3/4" x 12ft LH Galvanized Red/Yellow

Wire size: .262
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-262-334-144-R

Torsion Spring .262 x 3-3/4" x 12ft RH Galvanized Red/Yellow

Wire size: .262
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-243-334-144-R

Torsion Spring .243 x 3-3/4" x 12ft RH Galvanized White/Yellow

Wire size: .243
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-250-2-144-R

Torsion Spring .250 x 2" x 12ft RH Galvanized Green

Wire size: .250
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-243-258-144-L

Torsion Spring .243 x 2-5/8" x 12ft LH Galvanized White/Yellow

Wire size: .243
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-234-258-144-R

Galvanized Torsion Spring .234 x 2-5/8" x 12ft RH Blue/White

Wire size: .234
Inside diameter: 2-5/8"
Length: 12 ft

GALV-234-258-144-L

Galvanized Torsion Spring .234 x 2-5/8" x 12ft LH Blue/White

Wire size: .234
Inside diameter: 2-5/8"
Length: 12 ft

MGH-6536-M-N1-LH

Manaras 2 HP 208V 3P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

EMX-1915-1

EMX Single Grey Hood For IRB-MON2/4X2 1 Piece Only

Grey coloured metal hood (1 hood)

Q123

LiftMaster Electric Motor 12VDC K20-9012B-1

For use with various LiftMaster® Slide and Swing Gate Commercial Door Operators

Q520

LiftMaster Wiring Harness Kit CSW Motor K94-50286

Compatible with LiftMaster® Model CSW200UL Swing Gate Operators

12-1009

PVC Strip 6" x .060 Standard Clear Smooth for Replacement Strip Curtain Sold per Foot

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

BEA-10LIGHT-TBASE

BEA Modular LED Signal Base

To be used with the BEA-10LIGHT modules.

BEA-10PS12-24

BEA Power Supply UL/ULC Listed

2806.192.320

Whiting .192 x 2-3/16 x 32" Roadside with Cones

0-205679

Linear Proxpad Plus Integrated Prox Reader and Controller w/Keypad

Prox.pad™ plus is a fully integrated PC managed single door access system with a stand alone proximity reader and keypad.
The prox.pad plus when used on it’s own provides standard access control functionality with the use of it’s two relays and two inputs for request to exit and door position and enhanced system functionality when used with Hub Manager® Professional software.
The software allows the management of people and doors through easy to create reports and step by step wizard assisted expanded feature functionality.
The software can communicate to the prox.pad plus either through a 485 connection or on a LAN/WAN using the SEG-1 TCP/IP communication device.
By utilizing the proximity reader and keypad together a higher level of security is achieved by requiring both to grant access.
The prox.pad plus can be directly mounted to a single gang electrical box or to most flat surfaces.

.......more details