CP-MO-12R-115-1:Lynx Electric Motor Emerson 1/2 hp 120V Instant Reverse 6 Wire *** No Longer Available

BEA-10EVOLOOP

BEA EVOLOOP Induction Loop Replacement for Automatic Barrier Gates

Evoloop is the alternative to traditional in-ground induction loops used for vehicle detection in parking access and security applications
Ideal for Automatic Barrier Gate Operators when installing a tradition in-ground loop is not practical (winter weather or the customer doesn't want to cut new ashalt etc.)
Designed with a 140 degree field of view Evoloop allows for up to 3 virtual loops that provide precise detection for control of the barrier.
Dimensions: 2" x 6" x 2-5/8"
Mounting height between 12" and 27" from the road surface
Supply voltage: 12-30VDC +-10% / 12-24V AC +-10%
Programming via the EvoLoop App
Detection zone: 13'x16' @16'
Temperature range: -25 to 55 celcius
Nema 4 and IP65

BEA-10LIGHT-A

BEA Modular LED Signal Light Audible Segment

Audible Alarm 2.6 KHz ±250 Hz oscillation frequency; maximum intensity 92 dB @ 39.6 in

BEA-LZR-S600

BEA LZR-S600 Lazer-Based Time of Flight Sensor

The product configuration provides four LASER-based curtains offering a three dimensional presence detection zone.
This sensor is ideal for perimeter security protection industrial automation and large industrial door / gate applications that require a wide field of detection
The LZR®-S600 is housed in an IP65 rated enclosure and can be installed in outdoor industrial and other harsh environments.
Three visible LED spots provide accurate reference points when adjusting the tilt angle.
Parameter adjustments can be made with a BEA universal remote control.
Maximum detection range of 82 × 82 ft
High immunity to environmental interferences
Cable length: 33’
Detection mode: motion and presence
Min. detected object size: (typ.): 0.8 in @ 10 ft 1.4 in @ 16 ft 2.8 in @ 33 ft 6.9 in @ 82 ft

BEA-35-1566

BEA Power Cable RS-20US IS40

Replacement power cable only 35.1566
Replaces 35-1195
RS-20 US-Colored. Cable gland M16

BEA-35-1242

BEA 30' Harness 8-Conductor LZR

Power cable LZR-I100

BEARING048

Manaras Flange 2-Bolt Flange Bearing ID 3/4" Black

Replaces BEARING044

BEA-10BODYGUARD-T

BEA Automatic Overhead Pedestrian Swing Door Sensor

Designed to provide threshold protection during the open state
Prevents a closed door from opening and an open door from closing when a person is in the detection zone.
Adjustments can be made with the BEA remote.
Installation height: 9' max (6'6" to 8' recommended)
Operating temperature: -22 F to 140F
Immune to electrical and radio frequency interference
Cable length: 4'

Installation Manual Manuel d-Installation

BEA-10ULTIMO

BEA Automatic Sliding Door Sensor

Dual technology sensor for sliding doors: the microwave motion field activates as people/objects approach as the infrared curtains ensure the safety of pedestrians passing through the door opening.
Provides uniform sensitivity across the curtain.
Ideal for high-traffice environments such as hospitals hotels airports or retail facilities.
Mounting height: 6'6 to 11'6 •Operating temperature: -13 to 131F
IP54

Installation Manual Manuel d-Installation Sell Sheet

BEA-10EABA

BEA Bracket Accessory for Eagle Artek

BEA-10EARA

BEA Rain Hood for Eagle Artek Black

��Rain hood only

BEA-10EAGLE-ARTEK

BEA Eagle Compact Motion Sensor 6'-13' Mounting Height

EAGLE ARTEK is a motion sensor for all types of automatic doors. Its slim and compact design ensures discreet integration for your application making it ideal for pedestrian doors.
Superior field performance with improved filters that help to reduce false detections.
Easy to install and set up with flexible parameters and simple push-button settings. •The detection field can be adjusted without manually adjusting the antenna.
Max. detection range: wide: 13’ × 6.5’ narrow : 6.5’ × 7’ (@ 7’ high)
Temperature range: -4 – 131 °F (-20 – 55 °C)
Cable length: 8’
Microwave technology
Min. detection speed 2 in/s
IP54

Installation manual Spec sheet

BEA-10PS12-24

BEA Power Supply UL/ULC Listed

BEA-10LIGHT-TBASE

BEA Modular LED Signal Base

To be used with the BEA-10LIGHT modules.

User Guide Datasheet

BEA-10LIGHTBKT-TL

BEA Modular LED Signal Light Bracket

Bracket only for modular LED lights.

BEA-10LIGHT-TR

BEA Modular LED Signal Light Segment Red

Signal lights for industrial and vehicle flow management applications.
LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
Operating temperature: -40 to 122F
Nema 4/IP65
Base sold separately

User Guide Datasheet

BEA-10LIGHT-TG

BEA Modular LED Signal Light Segment Green

Signal lights for industrial and vehicle flow management applications.
LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
Operating temperature: -40 to 122F
Nema 4/IP65
Base sold separately

User Guide Datasheet

BEA-35-1555

BEA 50' of Cable Only for LZR Widescan

Optional 50 ft cable for use with the LZR-WIDESCAN

BEA-10-IXIO-ST

BEA Presence Sensor for Automatic Sliding Doors

IXIO-ST is an effective versatile and easy-to-use presence sensor for automatic sliding doors.
It can be used for both clear door openings and side-lite protection
Precise infrared curtains coupled with visible alignment beams make the IXIO-ST extremely safe and easy to adjust.
This state-of-the-art sensor features an on-board LCD screen that streamlines the installation and setup processes.
Intelligent Solution :On board microprocessor optimizes data analysis monitors sensor performance and enables system integration
Mounting height: 6’6” – 11’6”
Sensor temperature range: -13 – 131 °F * 0 – 95% relative humidity non-condensing LCD screen is operational from 14 – 131 °F.
The sensor may still be programmed in colder temperatures but with the remote control.

BEA-10FALCN-EX100

BEA Falcon Motion Detector w/Exp Proof Housing 100ft Cable

FALCON EX combines a microwave activation sensor with an explosion-proof / flame-proof housing
Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
FALCON EX can be mounted from 11.5' to 23' to fit any industrial application.
Nema4/IP66
Detection Zone: Falcon EX: 13’×16’ at 16’
Oerating termperature: -22-140F

BEA-10FALCON-EX30

BEA Falcon Motion Detector w/Exp Proof Housing 30ft Cable

FALCON EX combines a microwave activation sensor with an explosion-proof/flame-proof housing
Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
FALCON EX can be mounted from 11.5' to 23' to fit any industrial application.
Nema4/IP66
Detection Zone: Falcon EX: 13’×16’ at 16’
Operating temperature: -22 to 140F

BEA-10-WBA

BEA Universal Mounting Bracket Arm and Plate

Extendable from 15.35" - 23.62"
-90 to 90 degree tilt range
Self Drilling screws provided
Carbon Steel Black Powder Coated
Mostly used for WIDESCAN and 10FALCON models

Installation Guide

BEA-10-MINI-BRKT

BEA Mini Industrial Bracket Adjustable 6-12 "

Adjustable from 6 - 12 inches (up to 4" maybe cut off for shorter applications)
12" x 2.5" Mounting Face
Fasteners NOT Included
Carbon Steel Black Powder Coated

Installation Guide

BEA-10-IXIO-DT1

BEA Presence & Motion Sensor for Automatic Sliding Doors

Dual technology motion and presence sensor combining microwave activation and infrared presence detection for the automatic sliding door industry.
This solution is highly flexible and user-friendly for sliding doors industrial doors vehicle gate detection and off-door automation.
Precise Presence Detection: Two 24-spot high-density infrared safety curtains providing precise presence detection
Easily Adjustable: Four visible red alignment spots are projected on the ground to assist in precise IR curtain adjustment
Standards Compliant: Fully monitored internally capable of external monitoring
Operating temperature: -13 to 131F
Cable Length: 10’
Mounting Height 6 1/2 – 11 1/2’
Supply Voltage 12 – 24 VAC ±10%; 12 – 30 VDC ±10%
(to be operated from SELV compatible power supplies only)
IP65

BEARING033

Manaras 605 Ball Bearing 5/8"

BEARING058

Manaras Needle Roller Thrust Bearing 1" ID

1-9/16" OD 5/64" Width
Replaces BEARING025

BEA-10EAGLE

BEA Eagle Motion Sensor 6'-13' Mounting Height *** Replaced by BEA-10EAGLE-ARTEK

Designed for the activation of automatic pedestrian doors
Universally compatible with all makes and models of swinging sliding and revolving automatic doors
Eliminates False Detections: Immunity settings can be adjusted to reduce unwanted detections caused by rain snow and header vibrations
Versatile: Motion detection feature capable of detecting traffic moving as slow as two inches per second
Cable length: 8ft
Temperature Range -4 – 131 °F
Tilt Angles 0 – 90° vertical; -30 – 30° lateral
Dimensions 4.7" (L) × 3.1" (H) × 2.0" (W)

BEA-10-FALCON-W

BEA Falcon Wide Motion Detector

Allows uni or bi-directional sensing and the unique ability to open a door when traffic is moving away from the sensor.
Sensor also has the ability to differentiate between pedstrians and vehicles.
Mounting height between 11.5' and 21'
All settings are available directly on the unit or via the remote control.
Remote is sold separately
Detection zone: 30' x 11' at 21'
Operating temperature -22 to 140F
IP65

Guide de Produit

BEA-10-PSMDR2024

BEA Power Supply 100 - 240 VAC 24 VDC Output

BEA-10-LBA

BEA LZR Metal Bracket Accessory

Mounting bracket only for the LZR industrial sensors including: LZR-I30 LZR-S600 LZR-H100 LZR-U920/U921

Installation Guide

BEARING047

Manaras Flange Bearing 2-Bolt Black for 1' bore

2 set-screw holes 1/4-28 at 90 degrees. Set-Screws NOT included
Replaces BEARING012

BEARING051

Manaras Flange 2-Bolt Flange Bearing ID 5/8" Black

2 set screw holes 1/4-28 at 90 degree NO Set Screws provided
The original set screws are to be re-used

BEA-LZR-I30

BEA Laser Scanner for Ind. Automation Time of Flight Sensor Nema 4

The product configuration provides four laser-based curtains offering a three dimensional safety zone each capable of 360 in x 360 in (30 ft x 30 ft)
Designed for the detection of people and vehicles in both indoor and outdoor environments
The detection accuracy makes this sensor ideal for high performance industrial doors vehicle flow safety perimeter protection and a variety of applications. Detects objects as small as 2 inches at 30 feet away
IP65
Operating temperature: -22 to 140F
Three visible LED spots provide accurate reference points when adjusting the tilt angle.
Parameter adjustments can be made with a BEA remote control.

Installation manual Sell sheet

BEARING006

Manaras Flange Sealed Bearing 5/8"

Flange sealed bearing for 5/8" shaft

BEA-10-1311

BEA Adaptor Plate Kit for Widescan

BEA-10-BR3X

BEA Programmable 3 Relay Logic Module w/13 Functions

For use on automatic pedestrian doors access controls industrial automation and single-occupancy restrooms. •13 Functions Include:
Timer
Ratchet/Latching
2 Relay Sequence + Inhibitor
2 Relay Sequence + Door Position
Deactivation Timer
3-Relay Sequencer + '1-shot'
3-Relay Sequence with 'Independent Relay'
Interlock Timer
Interlock Ratchet/Latching
2-Way 2 Relay Sequence
Normally Locked Restroom
Normally Unlocked Restroom
3-Relay Sequencer + 'Day / Night (24 hr) Mode'
Disable
Simple setup with two-button programming combined with dual seven-segment display
The need for external components when installing some electric locking devices is eliminated with two 3-AMP relays and one 1-Amp relay with built-in surge suppression
Power an electric locking device directly from the module using WET output with AC / DC voltage
Operating temperature: -15 to 150F

Product guide

BEA-LZR-WIDESCAN

BEA Widescan LZR Motion Sensor Time of Flight

Should only be mounted Left Hand or Centre Mount
Time-of-flight lazor sensor used for motion safety & presence detection
Offers the benefits of activation & safety while reducing installation time.
Can detect objects based on direction speed object size & height.
The detection field operates independent of ground conditions allowing for superior functionality in harsh environments.
Ideal for replacing costly/labor-intensive induction loop & pull-cord solutions
Virtual pull-cord function can differentiate between pedestrian & vehicle traffic and can provide pulse-on-stop activation
Promotes energy savings by reducing false detections / unnecessary door cycling helping to regulate HVAC.
Two visible LASER alignment spots ensure accurate pattern placement
2 m to 10 m (max. 6 m for optimal safety detection)

Mechanical Installation Sell sheet

BEA-10T300PB

BEA Wired Transmitter Push Button No Case 300 MHz

��300MHz Analog Flag Connector Transmitter
For All Activation Plates Except Jamb and Vestibule 9V Battery
10 dip switch access code programming
Operating temperature: -10 to 55C

BEA-10-INDBRKT

BEA Extension Bracket Heavy-Duty Powder Coated

Heavy Duty Powder Coated Steel
Adjustable from 20 to 36 inches
12" x 2.5" Mounting Face
Fasteners NOT Included

Installation Guide

BEARING012

Manaras Flange Bearing Green for 1' bore ** Repl. by BEARING047

15/32" bolt holes

BEA-10-FALCN-XL

BEA Falcon-XL Motion Detector Mount under 11'5"

Same features as the Falcon detector but made specifically for extra low mounting
Mounting height between 6.5' and 11.5'
Detection zone: 13'x6.5' at 8 1/5'
Allows uni or bi-directional sensing and the unique ability to open a door when traffic is moving away from the sensor.
Sensor also has the ability to differentiate between pedstrians and vehicles.
Available remote makes it easy to make adjustments to all key parameters of the sensor while at ground level.
Remote is sold separately.
Operating temperature: -22 to 140F
IP65

Installation manual Manuel d'installation Sell sheet Cut sheet

BEA-10-FALCON

BEA Falcon Motion Detector Mount over 11'5"

Motion sensor with microwave activationsolution for industrial indoor and outdoor use.
Ideal for automatic industrial doors vehicle gates and detection and loading docks.
Sensor also has the ability to differentiate between pedstrians and vehicles
Can be set vertically from 0 to 180 degrees
Mounting height between 11.5' and 23'
12/24V AC/DC
All settings are available directly on the unit or via the remote control
Remote is sold separately
Detection zone: 13'x16' @16'
Temperature range: -22 to 140F
Nema 4 and IP65
Also known as FALCON1

Installation manual Manuel d'installation Sell sheet Cut sheet

BEA-REMOTE

BEA Falcon/LZR Programming Remote

Makes it easy to set up and make adjustments to all key parameters of the Falcon motion detector while at ground level

Programming instructions

BEARING005

Manaras Flange Bearing ID 5/8"

Flange bearing for 5/8" shaft

BEARING007

Manaras Flange Bearing ID 1"

Flange bearing for 1" shaft

10FALCON-ARTEK

BEA Falcon Artek Motion Detector Mount 6.5 to 23'

Motion sensor with microwave activationsolution for industrial indoor and outdoor use.
Ideal for automatic industrial doors vehicle gates and detection and loading docks.
Sensor also has the ability to differentiate between pedstrians and vehicles
Can be set vertically from 0 to 180 degrees
Mounting height between 6.5' and 23'
12/24V AC/DC
All settings are available directly on the unit or via the remote control
Remote is sold separately
Replaces: FALCON FALCON XL and FALCON W