Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search 1
BK301

Jamb bracket J-01 #1 12 gauge

  • Sold by the piece
  • Height 2.40" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
36605A

Genie Pulley Assembly Belt Drive *** NLA

  • Genie 36605A PULLEY
  • For Belt Drive Models
  • For Chain lift Belt Lift ReliaG 600 & 800 1022 1024 1042 2022 2024 2042
  • Also for Overhead Door Models Legacy 800 & Standard Drive Belt
SOLID_SHAFT_16'

Solid Shaft 1" Keyed 16 ft Galvanized

  • Actual length is approx. 16'-1"
9150000627

1/8" Stops ONLY 100/pkg

  • Stops only 100 per pack
MX00147-OLD

Micanan Complete Clutch Kit for PRO-TB Old Style Frame

  • Before 2006
  • 9" Diameter
SEL2641R433-IP5

Erone 2-Relay Stand Alone Receiver Up to 500 Users 433MHz

  • 2 transmitter keys per user
  • 1 NO relay + 1 NO/NC relay (24VA)
  • Self-learning memorization
  • 12/24V AC/DC
Wireless System Chart
P219-1

Heddolf 1-Button Mini Transmitter 318MHz ** Available to Extent of Inventory

  • Open/Close mini remote for 1 door
  • 8 dip switch
  • Allstar compatible
Programming Instructions
MG020-Y-2E-04

Miller Edge Sensing Edge Yellow 2-Wire End Outlet 4ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
OSH-6232-ECB

Manaras Opera-SH 1/2 HP 208V 3 Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation ManualSell Sheet
OSH-6212-ECB

Manaras Opera-SH 1/2 HP 240V 1Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation ManualSell Sheet
OHJ-6534-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 600V 3 Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
OPH-6434-ECB

Manaras Opera-H 1 HP 480V 3 Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
OPJ-6534-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 600V 3 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
37407

Doorlec Reversing Contactor BF9 24VAC

37301

Reversing Contactor RM12 24VAC - ** NLA

  • No longer available.
  • Possible substitution # 37407
CLUTCHPAD007

Manaras Clutch Pad 1-3/4" ID 5" OD

VBELT_4L355

Doorlec VBelt 4L 35.5" *** NLA

  • Same as part number 19045
SETMCIC9V

Erone 1-Channel Wireless Module 433 MHz

  • You can replace the battery with a power supply by removing the SETMC1C9V battery adapter and connect the red (9V) and black (0V) wire into power supply
  • Connect a door contact motion detector or any relay activated devices to the SETMC1C9V it will communicate their status wirelessly
  • Works with any 433 MHz Erone receiver
75W-RS-BULB

Rough Service Bulb 75W ** Disc. to extent of inventory

33950R

Genie Up Limit Switch Assembly 66 " Wire

  • For use on 7'6" rail assemblies.
  • For Genie Excelerator models and Overhead Overdrive models
  • Open / Up magnetic limit switch
773

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2-1/2" 1000/Box *** Temp. NLA

  • 7/16" Head
  • Hex washer high profile head
7001-10-W/B

Commercial Side & Top Weather-Strip 10' Long - White/Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
802

Fasteners Sleeve Anchor 3/8" x 1-7/8" 100/Box

  • Secure anchoring into concrete brick or block
MX00140-110-OLD

Micanan Brake Assembly for PRO-TB/APTB with 110V Solenoid Inside - Old Model

K204C0211

LiftMaster Torroid Transformer

  • Transformer replacement kit for use with various LiftMaster® Commercial Slide and Swing Gate Operators
109099

LiftMaster Flat Wall Plate Mounting Bracket

  • Heavy 1/4" steel plate bracket used for wall mounting of side-mount operators.
  • Slots in back allow for tensioning of drive chain.
  • Mouting studs match up with mounting holes of LiftMaster Models DJ DH J MGJ H and GH operators.
OTBH-6113-1-ECB

Manaras Trolley Operator 3/4HP 120V 1Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
97798

Marantec 2 Piece Logic Board with Terminal Strip for EOS Models

  • For use on Easy Operating System (EOS) units 4500E 4700E and M50.
  • Includes the terminal strip for direct replacement of boards that had a power surge or burned out.
  • The marantec old model number was 78914 it is now 97798.
Programming Instructions
29-10338

LiftMaster Capacitor 70uf 230V 60Hz

  • For models: MJ5011 MH5011 HMJ5011 MT5011 and BMT5011
MD00086

Micanan Sprocket 40B18 x 1" 1/4" Keyway

CARSENSE-101

EMX Buried Driveway Alert Sensor XC101-LV Probe Sold Separately (CS101)

  • The CarSense 101 provides a solution for many vehicle detection challenges. Where safety is an issue the CarSense 101 detects moving vehicles in blind areas along a driving path and actuates warning lights.
  • For access control applications requiring free exit the CarSense 101 detects vehicles and actuates gates overhead doors and other parking barriers.
  • Controls and indicators are mounted on front panel
  • Available in 9 - 41 VDC 6 - 29 VAC.
  • Low 2.5 mA standby current consumption makes it an excellent choice for solar power applications.
  • Housed in a small relay-type housing
    • .......more details
Installation ManualSell Sheet
766

Fasteners Flat Head Carriage Bolt 1/4-20 x 2-1/2" 1000/Box

  • Full length thread
  • Max torque = 6
BK104

Spring Anchor with Bearing 3-3/8" 13-gauge Sold per Piece

  • For residential applications. Use CBS-338 for commercial / industrial applications
  • Zinc plated 11-guage steel
  • 1" bore bearing installed
  • Single clipped end
764

Fasteners Serrated Flange Nut 5/16-18 1000/Box

RBH501L5-LH

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 *** To Extent of Inventory

  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Brake standard on all RBH operators
  • #48 chain #50 output sprocket chain
  • Comes with CPS-U photoeyes and 02-103 O/C/S push button
    • .......more details
Installation ManualManuel d'InstallationSell sheet
SSZP19-1

Solid Shaft 1" Keyed Zinc Plated 19'-1"

T501L5

LiftMaster 1/2HP 115/230 Volt 1Ph Commercial Trolley Operator

  • New Logic 5
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • MyQ Mobile App is a free download with no annual activation fee.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
K001D8073-1

LiftMaster Three Phase Relay/Power Board 230/460V (K001D8397)

  • For Logic 5 commercial operators
  • 014D1279E
  • New part number K001D8397
751

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 1" (#2PT) 1000/Box

  • 7/16" Head
  • Indented hex washer head
  • Max RPM = 2000
CH505L5-RH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 575 VAC 3 Ph Logic 5 Right Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
CH501L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 115/230 VAC Logic 5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
RS1039-C

Roller 3" Steel 9" stem 10 ball Torque Force

  • Steel Roller Wheel diameter: 3"
  • Working length: 8.5"
  • Overall length: 9.64"
  • Box qty: 75
17-6014

LiftMaster Motor Pulley 5L 5/8" ID x 2" OD

  • Fits model H operator with Logic 5
  • 5/8" ID x 2" OD
K21-36793

LiftMaster Transformer 208-230/460 Volts 20Va

  • 230/460V PRIMARY 24V SECONDARY 20VA
K72-12515-1

LiftMaster Limit Switch Kit

  • For models T H Logic 5 and various L3 L4 commercial operators
  • Also known as: K75-12515-1 K75-12514
178B35

LiftMaster Curved / Bent Arm Kit (41B0035B)

  • Will work with most residential garage door openers
  • Also known as: 4178B0035B 178B32 41B0035B 4178B35 178B35 012385990357 178B35B
71B575G

LiftMaster Brake Kit 575V with Solenoid Field Install SL585 and SL595

  • Kit comes complete with: Brake hub kit brake release lever brake disk spring cup studs compression springs brake solenoid solenoid cover spacers mounting plate pressure plate feather key and conduit.
Instruction Manual
41C168

LiftMaster Transformer

  • For model 8500
  • 120V / 150 VA
  • 24VDC output voltage
7001-9-SANDSTNE

Commercial Side & Top Weather-Strip 9' Long - Sandstone (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (20)
GTS-16

Garaga Top Seal Single-Fin Black 16ft ** To Extent of Inventory

  • Thermoplastic resin weatherseal co-extruded.
  • For Commercial / Residential applications
  • Screws directly to the top of door no retainer required
T014

Manaras Trolley Track 14ft for 1/2HP models up-charge *Actual length 198"*

  • For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)
165-B

Fusible Link For Loads 1 to 10 lbs

  • Length is 1.4328" width is .563"
  • Distance between center is .938"
  • Priced per each
  • Fire rated at 165 degrees Fahrenheit
MOFT20-M14-8

Carlo Gavazzi Photoelectric Sensor Thru-Beam Transmitter

  • Maximum sensing distance is 20 meters
  • 11-pin
  • Waterproof for harsh environment i.e. water dust steam etc.
  • To be used with amplifier series S142.
  • Supplied with 15 m of shielded cable.
  • For receiver unit order part no. MOFR-M14-8.
    • .......more details
Installation Manual
41AC075-2

LiftMaster Circuit Board Assembly for Dual Capacitor Models 315Mhz ** To extent of inventory

  • Assembly includes: End panel Logic board and Light socket
  • For chain drive units with two lights ie..3575 3585 3595 PD752D and PD758D
  • Also known as 41AB075-2 41AC075-2 041AC075-2A
CONSD24V

Reversing Contactor Struthers Dunn 24V

  • Struthers-Dunn # A275KXX90
02-410B

LiftMaster Commercial Key Control Station Open-Close and Off with Stop Button and BEST Cylinder

  • Outdoor Surface Mount Nema 4/12 station
  • Standard key cylinder is replaced with BEST cylinder
  • Open/Close spring return to center (off)
  • Key removable in center position only
  • With Stop button
110995

Allstar Classic 3-Btn Transmitter 318 MHz

  • Open/Close remote for 1 door
  • Quick code platform
  • Compatible with both MVP and traditional Allstar receivers
  • Replacement for 9921T 9931T 8822T 8832T 8833T 9921MT 9931MT 9921TK 9931TK 8832TK and 9931TK6
Programming Instructions
27-20113

Truck Door W-Style Spring Assembly Roadside 33" Long

  • Wire thickness: .182
  • Spring length: 33 inches long (assembled length)
  • Inside diameter: 1.188
  • Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.
MV-00026

Micanan 24V Commercial Receiver CR32-24V

Programming Instructions
27-20112

Truck Door W-Style Spring Assembly Curbside 33" Long

  • Wire thickness: .182
  • Spring length: 33 inches long (assembled length)
  • Inside diameter: 1.188
  • Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.
G90-503000

LiftMaster Non-Resettable Counter 24VAC (50-12862)

  • Increases one number each time current is applied
  • Connects to the 24 volts of contactor coil
  • Simple 2-wire connection
  • Same as 50-12862
480LM

LiftMaster Alternate Mounting / Extension Kit for 3800 3900 8900W 8500 8500W

  • Enables the opener to be lowered due to obstructed areas and low ceilings
  • lowers the operator by 6" requires 1-1/2" above the door shaft
  • Installs quickly and easily
  • Same as 480LMB
Installation ManualManuel d'Installation
8FT-BELT-LDO

Linear 8ft Belt Drive Rail for LD050/LS050/LDCO (HBT8C)

  • 8ft belt-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits
8FT-CHAIN-LDO

Linear 8ft Chain Rail for LD050/LS050/LDCO (HCT8C)

  • 8ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits
2705.177_270

Whiting Curbside Torsion Spring 2-3/16" ID 27" Long

  • Torsion spring wire only
  • .177 wire size
DF084.1

Whiting Dry Freight Door 3/4" with Track Balancer and Standard Hardware

  • Standard features include: 2-cable balancer with independent springs
  • Balancer springs treated with rust preventative
  • All door hardware is E-coated
  • Spring loaded lock catch
  • Heavy-duty 2" 13-gauge track
  • Stainless steel aircraft cables
    • .......more details
TAC1

LiftMaster Single Line Telephone Access Control with Radio

  • The TAC1 can be connected to two devices such as a door or gate using the two independently controlled relays or wirelessly using Security+ technology standard or any combination of the two.
  • Provides wired communication and secure access control at the gate or door.
  • Measurements: 6" h x 8.75" w
Installation ManualProgramming Instructions
BK000-B

Residential Top Roller Bracket Adjustable 2-Bolt Sold per Piece

  • Sold per piece - not sold as a pair
  • Meant for 2" hardware
13-3510*

LiftMaster Chain Guide ***NLA

  • This is NLA as a part by itself but may be purchased in a kit K75-18493
08-11013

LiftMaster Bevel Gear 3/4" ID

  • Fits the LiftMaster GH operator
SOLID_SHAFT_7FT

Solid Shaft 1" Keyed 7 ft Galvanized

  • Actual length is approx. 7'-1"
WKP250LM3

LiftMaster Wireless Keypad 250-Code ** Replaced by KPW250

  • Wireless access control keypad
  • 250 code capacity - 4-digit codes
  • Wireless control of up to 4 doors or gates with additional GCUs
  • Post or surface mount standard
  • 900MHz
  • Compatible with GCU and LiftMaster® 315MHz rolling code receivers
    • .......more details
Programming Instructions
MK-00493

Reversing Contactor Telemecanique 24V Coil (MK-01179)

  • Same as MK-01179
1013-1-1/4-9'

Rigid Vinyl Bottom Retainer L-Shaped. 9' Long

  • For door thickness: 1-1/4"
41C3196

LiftMaster Antenna for Co-Axial Receiver

  • Wire antenna kit same as what is supplied in a 312 / 412 HMC
15-50B18QGH

Sprocket 18 Teeth 1-1/4" Bore 1/4" Keyway

MU00001

Micanan Swivel Pulley

  • For models PRO-H / HB
50-105

LiftMaster Black Coil Cord 4-Wire 18-ga 20 ft. Extended Curly Cord

50-104-2

LiftMaster Orange Coil Cord 3-Wire 18-ga 20 ft. Extended Curly Cord

CABLE_532SS-500

Cable 5/32" 7x19 Stainless Steel 500ft

Comparison charts
GREASE

Gear and Rail Grease 3/4 oz Tube *** No Longer Available

  • A low temperature lithium based grease
  • To avoid tooth wear premature failure and temperature rise caused by friction by promoting sliding between teeth
QUICK_CLOSE

Commercial Quick Close Device / Universal Timer V7

  • This device will automatically close the door as soon as the vehicle passes through the safety beams.
Wiring InstructionsMonitored connectionNon-monitored connection
.218-2-L

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
109020

Linear 1-Channel Multi-Code Receiver 300 MHz

  • Three tabs for universal mounting
  • One "NO" relay
  • Compatible with 10 dip- swith 300 MHz Multi-code transmitters
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
309013

Linear 1-Channel Multi-Code Receiver 310 MHz

  • Three tabs for universal mounting
  • One N/O relay
  • Compatible with 310 MHz Stanley and Multi-Code transmitters only.
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
387LMC

LiftMaster Universal Wireless Keyless Entry

  • Universal Keyless Entry works with garage doors made by LiftMaster Genie Stanley Overhead Door Wayne-Dalton Craftsman Chamberlain and Linear/Moor-o-Matic.
  • Single manufacturer/single frequency design – you pick the manufacturer and frequency for the garage door you want to open
  • Wireless – powered by one 9V battery (included)
  • Weatherproof slide-up protective cover
  • Open or close the garage door without using a remote
  • Backlit keypad
    • .......more details
Programming InstructionsInstructions de programmationSell Sheet
ER100

Carlo Gavazzi Reflector 4" (100mm) Square

  • High quality reflector for retro-reflective photoelectric switches
  • Dimensions: 100 mm x 100 mm 9.2 mm thick
ME123-C

Miller Edge U-Shaped PVC Mounting Channel Sold by the Foot

  • 2" Wide 1-1/4" High
41D794

LiftMaster Replacement Motor with Positioning Sensor

  • Electric motor for model 3850
Installation ManualManuel d'Installation
K001A6424

LiftMaster Circuit Board Assembly Kit 2010 and later 315 MHz

  • UL325 Replacement circuit board for Medium-Duty Logic Commercial Operators
  • Used on models MJ MH MHS MT BMT and MGJ (UL325 compliant operators)
  • 315 MHz intergral radio receiver accepts 20 Sec+ remotes or unlimited dip switch
Installation Manual
7FT-RAIL-BELT

LiftMaster 7' belt drive rail 2777BD - colour code: Grey

  • Price reflects cost if purchased with an opener
535LMC*

LiftMaster Universal Radio Control Receiver 390 MHz **Replaced by 412HMC

  • Over 100 billion possible codes makes it impossible to duplicate the frequency
  • Jumper option for momentary or constant relay contact
  • Specifically for use with most 3-wire systems without a transformer
  • Accepts up tp 8 Security+ remote control codes and one keyless entry
  • Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the yellow LED light - Sec+ format
  • Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required
    • .......more details
881LMW

LiftMaster Motion-Detecting Control Panel with TTC Sec+ 2.0 Wi-Fi

  • Push button for garage door operation
  • Motion-detector automatically turns on the light when movement is detected
  • 150 degree sensing angle for motion sensor
  • Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
  • Timer-to-Close feature automatically closes the garage door after a pre-programmed number of minutes - 1 5 or 10
  • Light run-time is 4 1/2 minutes with adjustable light timer option
    • .......more details
.406_6"-LH

Torsion Spring .406 x 6" x 12ft LH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 6"
  • Length: 12 ft
.343_6"-LH

Torsion Spring .343 x 6" x 12ft LH Blue/Red

  • Wire size: .343
  • Inside diameter: 6"
  • Length: 12 ft
.331_3-3/4"-LH

Torsion Spring .331 x 3-3/4" x 12ft LH Red/White

  • Wire size: .331
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.273_2-5/8"-LH

Torsion Spring .273 x 2-5/8" x 12ft LH Orange/Red

  • Wire size: .273
  • Inside diameter: 2-5/8"
  • Length: 12 ft
372LMC*

LiftMaster 2-btn Security+ Transmitter 315 MHz ****Discontinued - Replaced by 892LT**

  • Both buttons feature Security+ rolling code technology
  • Compatible with models manufactured from 2005
  • Second button can learn other shared Liftmaster radio-controlled devices.
  • Includes visor clip and Lithium battery CR2032
  • Obsolete as of 9/31/2012 - Replaced by 375LM 892LT or 894LT
823LM

LiftMaster Remote Light Switch Sec+ 2.0 ** To Extent of Inventory

  • Controls lights remotely
  • Turn on lights in your garage yard or home with your garage door opener remote control
  • Use with LiftMaster Internet Gateway to control lights from smartphone or computer
  • Compatible only with Security+2.0 garage door openers and accessories enabled by MyQ technology
Installation ManualManuel d'Installation
380LMC

LiftMaster Remote Work Light

  • For use exclusively with the LiftMaster Wall Mount Garage Door Opener (model 8500)
  • Provides 200 watts of light with adjustable light time delay
  • Lights are controlled by opener activation or control panel light button
  • Add as many lights as you wish – perfect for brightening up a dark garage or workspace
Installation ManualManuel d'InstallationTroubleshooting