Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search 1 Commercial Door Operators Jackshaft
LJ8900W

LiftMaster Light Duty Jackshaft Door Op. for Sectional Doors

  • Ideal for smaller/lighter commercial doors with light duty cycle requirements
  • MyQ Technology Built-In Wi-Fi Real-Time Alerts
  • Smooth Start/Stop
  • Optional Accesories 877LM Keypad 827LM MyQ Remote LED light 485LM Battery Back-up 841LM Automatic Door Lock 480LMB Alternate Mounting Kit and LC-36A Light Curtain
  • Compatible remotes; 893MAX 891LM 893LM
Installation manualSell sheetBrochureGuide De Produit
LJH-353-1-RH

Doorlec 1 HP 575V 3PH Jackshaft Operator

  • Model LJH lasts an average of 10 million cycles
  • Available with ⅓ HP to 1 HP single-phase or three-phase motor and is equipped with self-adjusting solenoid brake
  • LJH installation is universal regardless of side (left or right)
  • Speed is approximately 1.4 feet per second or about 0.3 meters per second
  • Comes equipped with a manual chain hoist
LJH-311-3/4

Doorlec 3/4HP 115V 1PH Jackshaft Operator

Technical information
LJH-311-1/2-RH

Doorlec 1/2 HP 115V 1PH Jackshaft Operator Right Hand

  • CSA approved
  • Heavy duty industrial type control station open close stop 24V. control circuit
  • Universal mounting right or left
  • Floor level disconnect device electrical and mechanical
  • Emergency chain hoist operation on LJH model only
  • Colour code wiring diagrams
    • .......more details
Technical information
J501L5

LiftMaster Industrial-Duty Jackshaft 1/2 HP 115/230V 1Ph L5

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • J operators are attached to the door jackshaft to indirectly drive the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you
LJ8950W

LiftMaster Light Duty Commercial Jackshaft Op. for Rolling Doors

  • Ideal for smaller/lighter commercial doors with light duty cycle requirements
  • MyQ Technology Built-In Wi-Fi Real-Time Alerts
  • Smooth Start/Stop
  • Optional Accesories 827LM MyQ Remote LED light 485LM Battery Back-up 841LM Automatic Door Lock 480LMB Alternate Mounting Kit and LC-36A Light Curtain
  • Powerful Add-Ons 811LM and KPW5/KPW250
LJH-383-1/2-RH

Doorlec 1/2 HP 208V 3PH Jackshaft Operator Right Hand

  • Heavy duty industrial type control station open close stop 24V. control circuit
  • Universal mounting right or left
  • Floor level disconnect device electrical and mechanical
  • Emergency chain hoist operation on LJH model only
  • Colour code wiring diagrams
  • Rotary type limit switches readily adjustable in both directions
    • .......more details
Technical information
MJ5011U

LiftMaster Medium-Duty Jackshaft Op 1/2HP 115V

  • The MJ door operator is designed for use on vertical lift sectional doors or small rolling doors and grilles.
  • Maximum recommended duty cycle: 12 cycles per hour
  • Floor level disconnect
  • Adjustable friction clutch
  • Heavy-duty solenoid actuated brake
  • Easily field converted for right or left mounting
    • .......more details
Installation manualSell sheet
J751L5

LiftMaster Industrial-Duty Jackshaft 3/4 HP 115/230V 1Ph L5

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • J operators are attached to the door jackshaft to indirectly drive the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you
Installation manualManuel d'installationSell sheetBrochure
JDC7S1BMC

LiftMaster MAXUM Jackshaft DC Commercial Op. w/BBU 700LB

  • Max door height: 40 ft. Max. Sectional doors up to 700 lbs. Rolling steel or insulated doors up to 450 lbs.
  • myQ Compatibility: Setup available for either myQ or myQ Facility
  • Operating Temperature: Without Heater: -4°F (-20°C) – 140°F (60°C). With Heater: -40°F (-40°C) – 140°F (60°C)
  • Heater sold seperately
  • Voltage: 120V/240V (1PH/3PH); 480V (3PH); 208V & 600V (3PH) available with transformer accessory
  • Motor Power: 24VDC
    • .......more details
JDC7S1BMC_Installation-manualJDC7S1BMC_Manuel-installationData sheetFiche TechniqueQuick connect guideGuide de connexion rapideOrdering guideSprocket recommendation
MGJ-5011U-RH

LiftMaster Medium-Duty Logic Gear-Reduced Op. 1/2 HP 115V 1Ph Right Hand

  • MGJ is designed for use on rolling grilles and shutters.
  • Maximum recommended duty cycle: 12 cycles per hour.
  • Heavy-duty wormgear-in-oil-bath speed reducer
  • 3-button station for open/close/stop functionality
  • 315 MHz radio receiver is integral to the Medium-Duty Logic board
  • UL325-2010 Monitored Entrapment Capability (provides primary monitored entrapment protection through monitored photo sensors: either CPS-U or CPS-UN4 or a 4-wire monitored edge using the CPS-EI interface)
    • .......more details
Installation manualSell sheet
MGJ-5011U-LH

LiftMaster Medium-Duty Logic Gear-Reduced Op. 1/2 HP 115V 1Ph Left Hand

  • MGJ is designed for use on rolling grilles and shutters.
  • Maximum recommended duty cycle: 12 cycles per hour.
  • Heavy-duty wormgear-in-oil-bath speed reducer
  • 3-button station for open/close/stop functionality
  • 315 MHz radio receiver is integral to the Medium-Duty Logic board
  • UL325-2010 Monitored Entrapment Capability (provides primary monitored entrapment protection through monitored photo sensors: either CPS-U or CPS-UN4 or a 4-wire monitored edge using the CPS-EI interface)
    • .......more details
Installation manualSell sheet
OMJ-6112-M-N1-LH

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Monitored Circuit Board N1 Eyes Left Hand

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
OMJ-6112-M-N1-RH

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Monitored Circuit Board N1 Eyes Right Hand

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
OPJ-6114-M-N1

Manaras Heavy-Duty Jackshaft Op 1 HP 120V 1PH Monitored ECB w/N1 Photoeyes

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
OMJ-6112-ECB-L

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board Left Hand

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
Installation manualSell sheet
OPJ-6534-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 600V 3 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
OPJ-6434-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 480V 3 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
OPJ-6234-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 208V 3 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
OPJ-6214-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 240V 1 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet