Devanco Canada - Get The Right Garage Door Opener‎ and Parts

PRO-APTC-5083-U

Micanan 1/2HP 208V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1
Continuous duty industrial instant reverse 3-wire motor with overload protection
40:1 industrial duty gearbox reduction
Emergency dual-handle disconnect and reconnect trolley carriage for manual operation
#41 roller chain drive on trolley rail assembly
Heavy duty C-channel track UHMW trolley rollers and rubber dampeners for smooth quiet operation
Baked on dark grey coat finish
On-Board receiver holds up to 20 transmitters

Installation manual

E3K-2018

Omron Retro-Reflective Photocell w/Built-In 10K Resistor UL325-2018 *Same as model E3K-R10K4-N4

Fully complies with UL325-2018 standard for gate ops. that use the 10K resistor method and also the Normally Closed method
Easy to wire terminal strip
Plug-in replaceable outputs
Range: 40ft
Power: 24-240V AC/DC
The E3K-2018 has a second relay to accommodate traditional dry contact for non-monitored applications.

.......more details

Wiring Diagrams Sell sheet

2000P

LiftMaster HD Roller Cage Bearing Hinge Flat Mount Prime Coated Sold in Pairs

Heavy Duty Construction for Maximum Durability
Dependable Roller Cage Bearing Design
Even Weight Distribution
Five Times The Weight-Bearing Surface of the Nearest Large Hinge
Largest Weld Surface in the Industry
Easy to Fully Lubricate

.......more details

OSH-6212-ECB-LH

Manaras Opera-SH 1/2 HP 240V 1Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

SETR2641AM2K

Erone 2-Channel Mini Transmitter Black 433MHz

Heavy-duty construction
Elegant & easy to carry
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

25-42-190

Extension Spring 7' Door - 190 lbs Light Blue

Single - Loop
25" long 42" stretch 190 lb load
Sold individually
Rated for 10000 cycles

SG-13-NO

Telco Light Curtain with Rectifier Normally Open 72" (13-193-028-D1-E-H58-5)

Normally Open
SGR13-193-028-D1-E-HS8-5
SGT13-193-028-D1-E-01-15
1928mm housing 1800mm active height 28 channels NO relay output 15m cable

Specification sheet Wiring diagram

.331-6-R-C

Cut-to-Length Torsion Spring .331 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-600-INSTALLED
For spring filler use part no. SPRING-FILLER

.250-258-R-C

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

218758

Torque Force Spring Failure Device 1-1/4" Shaft Left Hand Side

For springs 2" up to 6"
This device can be applied on Industrial OH doors that are manual or motor operated
Must be installed on a keyed shaft

PRO-GH-5053U-L

Micanan 1/2HP 575V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-GH-5023U-R

Micanan 1/2HP 230V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

2704.206_325

Whiting Roadside Torsion Spring 2-3/16" ID 32-1/2" Long

Torsion spring wire only
.206 wire size

PRO-HB-7521U-LH

Micanan 3/4HP 230V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

LA412DCS

LiftMaster Secondary 12VDC Solar Actuator Arm for Dual Swing Gate Applications

Installation manual Manuel d'installation

PRO-H-7583-U-RH

Micanan 3/4HP 208V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

PRO-H-5021-U-RH

Micanan 1/2HP 230V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

K71-D1PH

LiftMaster Drum Brake Kit 1 Ph 115/230V (Late Model Logic 5 Shoe and Drum Models)

Internal Solenoid Drum Brake with Cable (120V Single Phase) Replacement Kit.
Compatible with LiftMaster® Logic 5.0 Model T SD J H and HJ Industrial-Duty Operators.
Complete service kit includes: Solenoid Cover Brake Solenoid Brake Drum Cable Mounting Plate and Installation Hardware.
Quiet preferred sound profile
Industry benchmark stopping performance with adjustability
Significantly reduced modes of failure

.......more details

Installation manual Manuel d'installation

MDT-1A

Linear 1-Channel Visor Transmitter MegaCode 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Factory programmed MegaCode format supports over 1000000 codes
Unique ”Extra” top button
High visibility operate LED
Visor clip included

.......more details

Programming instructions

MK-00049

Micanan Overload Reset 3-Phase 1.8 - 2.6 Amps

MW-00057

Micanan Splash Proof Cover Light Duty Fully Assembled

Splash proof cover for models: PRO-LJ J LH LHA and GJ
Same as MP-00253

MV-00008

Micanan 2-btn O/C Nema-4 Pushbutton Control Station

Surface mount
Non-Metallic

MK-00428

Micanan Reversing Relay 24VAC Coil 3-Pole TPDT 11-Pin Flange Mount

For PRO-LTB LJ LH LHAB

MD-00487

Micanan Roller Chain #60 Stainless Steel 10' Pack

.437-514-L

Cut-to-Length Torsion Spring .437 x 5-1/4" Left Hand Wound Red/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.421-334-R

Cut-to-Length Torsion Spring .421 x 3-3/4" Right Hand Wound Gold

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

.343-258-R

Cut-to-Length Torsion Spring .343 x 2-5/8" Right Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

SPRAY-562

Aluminum Touch Up Spray Paint 350g Commercial Brown / Brun Comm. #562/462

350g

PRO-J-7581-U-RH

Micanan 3/4HP 208V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

PRO-APT-7523-U

Micanan 3/4HP 230V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board

PRO-APT-5021-U

Micanan 1/2HP 230V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-7543-U

Micanan 3/4HP 460V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-7581-U

Micanan 3/4HP 208V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-5081-U

Micanan 1/2HP 208V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-LTB-5021-U

Micanan 1/2HP 230V 1P Commercial Trolley Operator With Brake N1 Eyes Monitored ECB

Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
Trolley track for door up to 12ft standard upcharge for 14' & 16'
Door speed 9 inches per second
UL325
On-Board receiver holds up to 20 transmitters

68-9U

Wheel Chock 68-9U Pyramid Rubber with U Handle

Handles for chain fastening
Long Lasting 80 Durometer rubber
Size: 8" wide x 9" long x 6" high

60-7248-MWC32

Wheel Chock Safety Pkg incl'd: chock w eye hook wall bracket 15' chain 3/8"x1 7/8" anchors (4) 3/16" quick link (2) & English caution sign

System Includes (1) MWC-32 Chock Bracket Tie Back Chain English Caution Sign and (4) Wall Bracket Anchors
Good stability over others in this class
Long Lasting 80 Durometer rubber
Size: 6-1/2" wide x 9-1/2" long x 8-1/2" high

60-7248-CBI29

Wheel Chock Safety Pkg incl'd: cast ductile iron wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) CBI-29 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Made from Cast Ductile Iron for Impressive Strength
Painted Blue for good Visibility
Completely Reversible for Simple Use
Size: 8" wide x 12" long x 9" high

RBH503L5-RH

LiftMaster 1/2 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Right Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

R5212

Pulley 5" Zinc Plated Clevis Pulley with Strap ** To extent of inventory

CAPXL

LiftMaster Connected Access Portal High Capacity

Connected Access Portal High Capacity Cloud-based access control for residential communities.
Capacities: 4 Controlled Gates/Doors
Wireless Link for up to 8 LiftMaster® Operators
4 to 8 Digit Entry Codes
4 to 6 Digit Directory Codes
50000 Local Resident Capacity

.......more details

D4-120

Extruded Bumper Black 120" L x 4 1/2" W x 3 3/4" H w/Metal Insert

Sold in 10' Lengths and cut to measure
Includes 10' Metal Washer Insert
Comes with 5 Holes for mounting or none - Please Specify When Ordering Bumper

HRB-12

High Riser Bracket for 7" Above Dock or Higher 12"

High Riser 12" Riser Bracket for 7" Above Dock Door or Higher
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

C-RING

Contact Ring for Centrifugal Switch in Single Phase Motor

MV-00354

Micanan Control Station 3-Btn O/C/S N4 Surface Mount c/w Key Lock-out & Red Pilot Light 24V

LVB1224-11

Laminated Bumper Black 12" Projection Vertical Installation 24" L x 11" W Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

TB406-24SF

Steel Faced Laminated Bumper Black 6" x 24" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB610-36SF

Steel Faced Laminated Bumper Black 10" x 36" 6 3/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-14

Laminated Bumper Standard Black 10" x 14" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB412-14

Laminated Bumper Standard Black 12" x 14" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB406-24

Laminated Bumper Standard Black 6" x 24" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

PRO-GHC-30053

Micanan 3 HP 575V 3P Gearhead Operator No Controls

Specification sheet

MK-00050

Micanan Overload Reset 3-Phase 2.6 - 3.7 Amps

K94-36934

LiftMaster Main Wiring Harness L5

26CW14225-CUT

Truck Door Bottom Panel with Hardware (15" x Cut-To-Size) Painted White for Todco Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels are routed and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes with 18" pull strap assembly two bottom fixtures standard lift handle two cable anchor brackets seal and retainer.

.......more details

R1

Erone Radium 1-Channel Key Chain Transmitter 433MHz

Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
A special algorithm allows to keep synchronized transmitter and receiver.
Range up to 250 m (820 ft)
Ergonomic rugged & durable
Battery: Two 3V lithium battery (CR2016)

.......more details

MJ00015

Micanan Brake Shoe Assembly for Old Style Manaras Operators

Assembly includes both right & left brake shoe

RP-TRF-110-2415VA

Lynx Transformer 110/24 15VA *** NLA

For old 455 Automatic Doorman opener

LA500-1PKG-XLMU

LiftMaster Residential / Light Comm. DC Swing Gate Op. Extra Large Control Box UL325 (Includes LA500CONTXLMUL (K74-39309-1) LA500DC (2x) 29-NP712 LMRRUL)

LA5001PKGXLMU replaces model LA5001PKGXLMDC
Updated unit complies with new UL325 code revised Jan 2016
System now requires monitored secondary entrapment devices unit will include LMRRU safety photo eye
Includes one LA500 arm XL control box receiver unit and photo eye and 2 -7amp batteries
Residential arm style swing gate operator with Extra Large control box and battery backup system
Battery Backup safeguards your property by providing up to 500 cycles* or up to 24 days* of standby power when the power is down.

.......more details

MH00043

Micanan Flange Bearing 3/8" D

LVB620-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

SL585103U

LiftMaster Industrial Slide Gate Op.1 HP 208/230/460V 3 Phase - Heater NOT Incl.

POWER: 115/208/230 VAC. Single Phase
ACCESSORY POWER: 24VAC 500mA max.
MONITORED SAFETY INPUTS: 3 Main Board 3 Expansion Board.
TEMPERATURE SPECIFICATIONS: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater -40°F (-40°C) to 140°F (60°C).
Heater option: HTRNB or NTR460 for 460V operators
UL USAGE CLASSIFICATION I II III and IV.

.......more details

Installation manual Manuel d'installation First step for installation Première étape pour l'installation Sell sheet Brochure Wiring diagram Schéma câblage

MB-03001

Micanan Electric Motor Only 1 HP 110/220V 1PH Base Mount O.D.P FR56

Base mount motor fits: T TB APT J EJ H EHJ HHD SD

E/BLOP/246

Automatic Systems Option DBK Fan Heater 120V-400W for BL229

CABLE_364SS-250

Cable 3/64" 7x7 250' Stainless Steel

Not for use in aircraft applications
Type: T304

MG00001

Micanan Ribbed Hex Nut 1/2" -13UNC

Used on PRO-GHC
4 required per operator

K1D8388-1CC

LiftMaster Main Control Board Linear Actuators for UL325

This replacement board is compatible with the following models: LA500U LA400U LA412U
Same as 001D8388-1CC
Sticker on board references 001D9040-1CC

TRACK-SET-2LH-138

2" Tracks Set 7'-0" Low Headroom Torsion 1-3/8" Door Clips for Wood Frame 12" Radius *** By quote only

RADIO-EM903

Manaras 3-btn Dip Switch Transmitter 313 MHz

Operates one to three doors
3-btn Open/Close function
10 dip-switches
LED indicator
Ergonomic design
3V battery and sun-visor clip included

.......more details

Programming instructions Instructions de programmation

DB13

Molded Rubber Bumper Black 13" L x 10" W 4" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

1005-1-3/8-10'

Aluminum Bottom Retainer U-Shaped 10' Long

For door thickness 1-3/8"

50183

Doorlec Brake Assembly 575V

Brake assembly consists of solenoid drum shoes plate spring cover and fasteners
For all V-belt driven models that have brakes

19-41119M

LiftMaster Roller Chain #41 with Master Links 59-1/2" Long

Same as: 195105 19-41119MB 19-4119M 1941119M

3-44-2

Roller Carrier Only 2-Hole Sold per Piece

Sold per piece no box quantity

MK00542

Micanan Emerson Motor Capacitor 1/2HP 110V 324-389uf with Resistor *** No Longer Available

For 1/2 Hp 110V operators

MP-00039

Micanan High Cycle Mod. for PRO-TTB

Modification only
For installations that exceed 100 door cycles per day
Includes cast iron flanged precision bearings on all shaft and delay on reverse circuit
Supplied with #41 chain

G1T-BX

Genie 1-btn Dual Frequency Transmitter -38501R

Auto Seek Dual Frequency 390/315 MHz
For Intellicode products only
1-Button Remote Control with Intellicode.
Compatible with all Genie openers produced since 1995.

Programming instructions

41A5658-1

LiftMaster Dual Gear & Sprocket Assembly

This complete kit is compatible with 3/4HP LiftMaster® Models 8587/8587W; and various dual AC chain drive garage door openers.
Kit includes: helical gear and top hat assembly worm gear wear bushings grease and hardware needed to replace the chain drive gears.

KPR2000

LiftMaster Wired Keypad and Proximity Reader

The KPR2000 supports a maximum of 2000 users in multiple access configurations (card only 4 to 6 digit PIN only or a combination of card and PIN).
Supports HID 26 and 30-bit Wiegand proximity card formats.
Designed for outdoor environments with a sealed weather proof design allowing you to easily mount anywhere.
Functions as a Stand-Alone Controller or in Pass-Through Mode (Wiegand Keypad Wiegand Proximity Credentials ASCII Keypad).
Latch Mode allows you to hold open a door or gate for an extended period of time.
Rapid Programming and Block Enrollment capability “Add” and “Delete” program cards included.

.......more details

Installation instructions Manuel d'installation Sell sheet Brochure Wiring instructions Instructions de cablage

ANGLE-13G-2X2

Perforated Angle 2" x 2" x 10 ft 13 g

All holes No slots
Hole size: 7/16"

1461-LCN

LCN Door Closer with Regular Arm and PA Bracket

Aluminum finish
Can be used for both commercial and institutional applications
Can be mounted on either left or right swinging doors
The spring power of a 1461 cylinder is field adjustable from size 1 through size 6 and is shipped adjusted to size 3.

OPH-6532-ECB-LH

Manaras Opera-H 1/2HP 600V 3Ph with Electronic Circuit Board Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"

K75-12584

LiftMaster Complete Brake Assembly GH 115V

Complete assembly includes: Brake hub kit Brake release lever Brake disk Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Fastener.

TL-5000

Trailer Lock Lever 32-1/4" long Stainless Steel

Provides leverage to easily open shipping container doors
18-8 Stainless steel construction
Polyurethane coated handle
5.5 lbs.
32-1/4" long
Fits most modern container door handles

.......more details

CAP-450-540-110V

Capacitor 450-540 MFD 110/125V with Resistor

Same as CP-CAP-COM-450-540
Motor start capacitor

.207-3-7.5-RHW

Mini Storage Spring .207 x 3" x 7.5" long Right Hand

MU22-2WIRE-U-Y

Miller Edge MU22 2-Wire Universal Yellow - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty