Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Bottom
MA021

LiftMaster Nylon Arm Nuts 50/Pkg

  • For barrier gate models MADCBB MATDCBB MASDCBB & MASTDCBB
7001-18-CREAM

Commercial Side & Top Weather-Strip 18' Long - Cream (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (10)
K74-16420

LiftMaster Limit Switch Kit for LGO **DISCONTINUED

Installation Manual
510.5920.06

Whiting Stainless Steel Rivets Option for Dry Freight Door 5-Rows of Hinges 6 Panels

  • Upgrade option
13-3510*

LiftMaster Chain Guide ***NLA

  • This is NLA as a part by itself but may be purchased in a kit K75-18493
11-3602_SHAFT

LiftMaster Idler Shaft (1)

  • Fits SL595
  • Two are required per operator
M18

LiftMaster Remote Control Tester ** NLA

1013-1-1/4-24'

Rigid Vinyl Bottom Retainer L-Shaped 24' Long

  • For door thickness: 1-1/4"
MDRG

Linear 1-Channel MegaCode Gate Receiver 318 MHz *** Discontinued

  • Activates one gate or device
  • Supplied with F-connector and whip antenna
  • Mounting bracket supplied
  • Memory: storage for up to 40 MegaCode transmitters
  • Power: 24 VAC/VDC
  • Codes: 1000000+ (MegaCode format)
    • .......more details
Programming Instructions
TUBE_SHAFT_9FT

Hollow Shaft 1" x 9'-10" Galvanized 16 gauge

.283-134-R

Cut-to-Length Torsion Spring .283 x 1-3/4" Right Hand Wound White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.250-134-L

Cut-to-Length Torsion Spring .250 x 1-3/4" Left Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.234-134-L

Cut-to-Length Torsion Spring .234 x 1-3/4" Left Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
MX00034-110V

Micanan Brake Assembly for PRO-HHD with 120V Solenoid (MX00206-110)

  • Complete brake assembly including 120V solenoid - solenoid cover sold separately part #MM00011
.421_6"-LH

Torsion Spring .421 x 6" x 12ft LH Gold

  • Wire size: .421
  • Inside diameter: 6"
  • Length: 12 ft
.295_6"-LH

Torsion Spring .295 x 6" x 12ft LH Blue

  • Wire size: .295
  • Inside diameter: 6"
  • Length: 12 ft
.273_3-3/4"-LH

Torsion Spring .273 x 3-3/4" x 12ft LH Orange/Red

  • Wire size: .273
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.331_2-5/8"-LH

Torsion Spring .331 x 2-5/8" x 12ft LH Red/White

  • Wire size: .331
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.319_2-5/8"-LH

Torsion Spring .319 x 2-5/8" x 12ft LH Blue/Green

  • Wire size: .319
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.312_2-5/8"-LH

Torsion Spring .312 x 2-5/8" x 12ft LH Yellow

  • Wire size: .312
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.283_2"-LH

Torsion Spring .283 x 2" x 12ft LH White

  • Wire size: .283
  • Inside diameter: 2"
  • Length: 12 ft
.295_2"-LH

Torsion Spring .295 x 2" x 12ft LH Blue

  • Wire size: .295
  • Inside diameter: 2"
  • Length: 12 ft
.331_6"-RH

Torsion Spring .331 x 6" x 12ft RH Red/White

  • Wire size: .331
  • Inside diameter: 6"
  • Length: 12 ft
.283_5-1/4"-RH

Torsion Spring .283 x 5-1/4" x 12ft RH White

  • Wire size: .283
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.343_2-5/8"-RH

Torsion Spring .343 x 2-5/8" x 12ft RH Blue/Red

  • Wire size: .343
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.250_2-5/8"-RH

Torsion Spring .250 x 2-5/8" x 12ft RH Green

  • Wire size: .250
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.273_1-3/4"-RH

Torsion Spring .273 x 1-3/4" x 12ft RH Orange/Red

  • Wire size: .273
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.250_1-3/4"-RH

Torsion Spring .250 x 1-3/4" x 12ft RH Green

  • Wire size: .250
  • Inside diameter: 1-3/4"
  • Length: 12 ft
PL-A03-NEW-BRD

Lynx Replacement Logic Board New Version

  • New version board works on operators with a red cover
  • Replacement logic board for Napoleon/Lynx Proline garage door opener
  • For openers built June 2008 or later (date code 0806 or newer)
  • This board does not have a transformer.
MINI-T

Linear 1-Channel Delta3 Key Ring Transmitter 310 MHz (DNT00026)

  • Activates one Delta-3 receiver
  • Test/operate LED
  • Key ring not supplied
  • Power: 12 V battery
  • Frequency: 310 MHz
  • Codes: 256 (set by dip switches)
    • .......more details
Programming Instructions
HAE00033

Linear 8ft Belt & Inner Slide Assembly (HBT8)

7952

Whiting Truck Door Stud Plate Gasket

4009-6FT

Aluminum Retainer only for Light Brush 6' Long Reverse Angle

  • For reverse angle rolling steel doors.
  • For use with Light Brush or Vinyl Insert.
1014-1-5/8-10'

Rigid Vinyl Bottom Retainer Notched 10' Long

  • Black - for door thickness of 1-5/8"
1015-1-3/4-12'

Rigid Vinyl Bottom Retainer Raised Centre 12' Long

  • Black - for door thickness of 1-3/4"
1006-2-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1006-1-3/8-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/8"
1006-1-3/4-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/4"
1005-1-3/8-16'

Aluminum Bottom Retainer U-Shaped 16' Long

  • For door thickness 1-3/8"
7001-18-BROWN

Commercial Side & Top Weather-Strip 18' Long - Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-14-BROWN

Commercial Side & Top Weather-Strip 14' Long - Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-8-BROWN

Commercial Side & Top Weather-Strip 8' Long - Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1104-14FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 14' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-9FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 9' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-8FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Brown (N)

  • Brown rigid vinyl retainer with brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-14FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 14' Long - Cream (C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Almond
1104-8FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 8' Long - Cream (C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Almond
1104-14FT-SAND

Residential Side & Top PVC Weather-Strip with cap 14' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
1104-9FT-SAND

Residential Side & Top PVC Weather-Strip with cap 9' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
7001-16-WHITE

Commercial Side & Top Weather-Strip 16' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-14-WHITE

Commercial Side & Top Weather-Strip 14' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-12-WHITE

Commercial Side & Top Weather-Strip 12' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-7-WHITE

Commercial Side & Top Weather-Strip 7' Long - White 7001-WW (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1102-16-BLACK

Commercial Side & Top Weather-Strip 16' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
1001-8-GREY

Commercial Side & Top Weather-Strip 8' Long - Grey

  • Aluminum retainer with grey dual-fin vinyl
  • Sold by full case quantity (10)
32-48-300

Extension Spring 8' Door - 300 lbs Tan ** Replaced by 27-48-300

  • Double - Loop
  • 32" long 48" stretch 300 lb load
  • Springs sold individually
Spec Sheet
32-48-240

Extension Spring 8' Door - 240 lbs Blue ** Replaced by 27-48-240

  • Double - Loop
  • 32" long 48" stretch 240 lb load
  • Springs sold individually
Spec Sheet
32-48-150

Extension Spring 8' Door - 150 lbs Red ** Replaced by 27-48-150

  • Double - Loop
  • 32" long 48" stretch 150 lb load
  • Springs sold individually
Spec Sheet
25-42-160

Extension Spring 7' Door - 160 lbs Brown

  • Double - Loop
  • 25" long 42" stretch 160 lb load
  • Sold individually
  • Rated for 10000 cycles
  • Same as part number 116
Spec Sheet
94-00105

Truck Door Cotter Pin 3/32" x 1-1/4"

  • Zinc plated
  • Cross Reference: T #80401-316 W #10-1009-5 120000
26-40037

Truck Door Offset U-Channel Seal Retainer 96" Long for Whiting DryFreight Doors *** To extent of inventory

  • Aluminum extrusion construction.
  • Retainer is offset to allow header clearence with seal when door is in open position.
  • For use with offset bottom seal #26-40040
  • Cross Reference: W #8280
26-14321

Truck Door Bottom Panel with Seal (11" x 98") for Todco Dryfreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment
  • 3/4" thick 7 ply exterior grade medium density plywood Primer finish
  • Comes only with bottom retainer and seal (installed)
6X10PO50

Devanco Loop 6' x 10' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
26-14625

Truck Door Top Panel (15" x 98") for Todco DryFreight

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • .75" thick 7 ply exterior grade medium density plywood
  • Primer finish
.295-334-L-C

Cut-to-Length Torsion Spring .295 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
LB810-24

Laminated Bumper Standard Black 10" x 24" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
28-00114

Truck Door 1" Std Vert. Track and Angle Assbly J Style Roadside (LH) 120" Todco Style

  • For Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes J-style channel mounting angle with track and operator bracket
  • Fits door sizes 101 - 114" high
  • Cross ref: T #49014-2 T #41034-2 & W #4045
.306-334-L

Cut-to-Length Torsion Spring .306 x 3-3/4" Left Hand Wound Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
5464.96

Whiting Top Seal Coldsaver 96" L 2-3/16" W

MK-00050

Micanan Overload Reset 3-Phase 2.6 - 3.7 Amps

MP-00002-110V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

  • Controlling action of two lights- sockets supplied on cover
2705.177_270

Whiting Curbside Torsion Spring 2-3/16" ID 27" Long

  • Torsion spring wire only
  • .177 wire size
2705.192_340

Whiting Curbside Torsion Spring 2-3/16" ID 34" Long

  • Torsion spring wire only
  • .192 wire size
K23-30716

LiftMaster Stop Switch 120VAC 6A

  • Same as 20-30716
2376.156.19.780

Whiting Torsion assembly .156 wire size 19" spring length 78" shaft

.306_6"-LH

Torsion Spring .306 x 6" x 12ft LH Red

  • Wire size: .306
  • Inside diameter: 6"
  • Length: 12 ft
STATION086

Manaras 3-btn Push-Button Control Station Nema 1 Flush Mount

  • 2 N/O contacts and 1 N/C contact for stop.
  • Flush mount.
GALV-295-258-144-L

Torsion Spring .295 x 2-5/8" x 12ft LH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
.343_5-1/4"-RH

Torsion Spring .343 x 5-1/4" x 12ft RH Blue/Red

  • Wire size: .343
  • Inside diameter: 5-1/4"
  • Length: 12 ft
MHS5011U-RH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

  • Designed for use on rolling sheet doors.
  • It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
  • Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
  • Floor level disconnect
  • 24V NEC Class 2
  • Wiring is factory present to C2 mode
    • .......more details
Installation manualSell sheet
K75-19985

LiftMaster Clutch Pulley Assembly

  • Fits model H operator with Logic 5
1005-1-3/8-24'

Aluminum Bottom Retainer U-Shaped 24' Long *** 24' is DISC

  • For door thickness 1-3/8"
71-B575H

LiftMaster Interior Brake Kit with Cable 575V (Logic 3 4 and early 5 Disc and Pad Models)

  • Interior mount brake kit for operation with chain hoist
  • Includes solenoid
Instruction Manual
1019-1-3/8-24'

Rigid Vinyl Bottom Retainer Flat 24' Long

  • Black - for door thickness of 1-3/8"
.306-258-R-C

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
SF600S-RIGHT

Spring Fitting 6" Pair Stationary + RHW 1" Shaft

  • Cones for 6" ID Right Hand Wound spring wire
  • Not universal thread
180210

Decorative Pull Handle Aspen-V3 Style 10-1/4" Stamped Steel Sold per piece

  • As seem on carriage house doors
CH753L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification
  • Brake not included.
  • Comes with CPS-UN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
EHJW-383-3/4

Doorlec Ind Jackshaft Op. Watertight ECB 3/4 HP 208V-3Ph

  • Equipped with: 3-btn control Adjustable Automatic Friction Clutch Emergency Chain Hoist and Heavy-Duty Solenoid Brake.
  • With DC-2000 controller
  • Watertight and Dust Tight EEMAC Type 4/12
218014-02

Lamp Socket Assembly

  • For models LSO LCO LDO
25130

Doorlec Seal Oil CR6372

ME113-R

Miller Edge Black Right Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
    • .......more details
Installation ManualWorksheetSell Sheet
28-2103

Steel Bumper Extension Bracket 4"D x 20" Tall 12"W

  • 4" deep (projection) x 20" tall x 12" wide
112337.0001.S

Genie Switch Assembly Interlock Expf *** Price by Quote

OTBH-6533-AM05

Manaras Trolley Operator 3/4 HP 600V 3Ph Monitored Board w/N4 Eyes Apt. Model

  • The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
  • 100 cycles per day
  • It incorporates a drum-shoe type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • #41 full roller chain
  • Includes monitored N4X eyes (PHOTO 061)
    • .......more details
K07-8003

LiftMaster lower Crank Link BG770/790 Barrier Gate

  • For use with BG770/790 barrier gate operator
2807.182*290

Whiting Spring Assby .182 x 2-3/16 x 29" Curbside

  • Replacement torsion spring with cones
  • Specs: .182 x 2-3/16" x 29" Long
  • Roadside
  • For Roadside order part # 2807.182*290
CYL-3BXLT

Replacement Cylinder Only for 3BXLT Comes with 2 Keys

1-0232

RW Hinge 434WM-BB Black 48" 3/8" x 3" wide Sold per Hinge

  • Pintle: Formed Steel 3/8" Thick
  • Strap: Formed Steel 3/8" thick x 3" wide
  • Pin: Zinc Plated Loose pin with cotter pin 1" diameter steel
  • Bearings: Precision Ball Bearings
  • Black Enamel
PRO-HBH-10083U-R

Micanan 1 HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 1 HP208V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details