Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search ysg
GH-343-1

Doorlec Industrial Jackshaft Door Operator 1 HP 460V 3-Phase

  • Custom-designed extra heavy-duty industrial-type electric door operator
  • Worm gear reducer 40:1 ratio
  • #60 roller chain and sprockets from operator shaft to door shaft.
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter
  • Rotary type limit switches
  • 3-Btn control. momentary-contact type for Open Close Stop
  • Solenoid disk brake
  • Sideroom required: 24 inch minimum
  • Maximum lifting capacity: 6800 LBS
CB18B1000

Cable 1/8" 7x19 1000' Galvanized ** To Extent of Inventory

  • Galvanized Cable 1/8" 7x19 1000ft spool.
  • Cable break strength: 2000 lbs
MOD163G

Manaras Heater in Reducer & C-Box 575V-3P 24VAC 15W + 30W

  • This modification is an option when ordering a commercial operator
MGH-6534-ECB-RH

Manaras 1 HP 600V 3P Jackshaft ECB Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
K20-1075C-2LP-H27

LiftMaster Electric Motor 3/4 HP 115V 1Ph Logic 5

  • Also known as: K20-1075C-2LP-H24
  • Replacement electric motor (3/4 HP 115/230V 1PH L5). For use with various LiftMaster® Logic 5.0 Gear-Reduced Commercial Door Operators
19-5816

LiftMaster Trolley Chain Pack #48 for 16ft Door

  • Chain pack only
SHAFT072

Manaras Input Shaft for MLH 5/8"-18

27026

Doorlec Electric Motor TEFC 1.5 HP 115/230V 1P DC203C

  • General purpose - Frame 56C
  • 1725 RPM for worm-gear reducer models TEFC type
JANUS-M650

Janus Non-Insulated Mini Storage Door Roll-Up Spec Order

  • 650 Series mini storage roll-up door
  • The 26 gauge corrugated door curtain is manufactured from full hard galvanized grade 80 steel and coated with Super Durable polyester paint
  • Available in sizes up to 10’0” x 10’0” and in over 20 different colors
  • During production each spring is coated with a generous amount of grease that penetrates the innermost pores of the spring with additives displacing moisture and preventing the formation of rust and corrosion
  • Enclosed in a tube for lifetime protection
  • Special Order item
    • .......more details
SSZP15-6

Solid Shaft 1" Keyed Zinc Plated 15'-6"

SSZP16-6

Solid Shaft 1" Keyed Zinc Plated 16'-6"

C-34X16-134-W

Thermal Window 34" x 16" for 1-3/4" Door White

  • For 1-3/4" thick door
SPR41B36X1

Sprocket 41B36 x 1" Bore 1/4" Keyway

  • 2 set screw 5/16
3228

Whiting 2" Nylon Roller 3" Shaft

  • Zinc plated shaft 10 roller ball design
  • Shaft Length: 3" Overall Length: 3.75"
BCH751L5R-BZ

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Op L5 Carwash and Roller Bearing Mod. RH ***No Longer Available

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
75-12362

LiftMaster Adaptor Plate with Fasteners

  • Also known as: 7512362 K75-12362
GHW-383-2

Doorlec Industrial Gear Head Door Operator 2 HP 208V 3P with ECB and Nema4 modification

  • Extra heavy-duty industrial-type electric door operator for damp environments.
  • Worm gear reducer 40:1 ratio
  • #50 roller chain and sprockets from operator shaft to door shaft. (#60 chain optional)
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter (also called friction clutch)
  • Rotary type limit switches
    • .......more details
OTBH-6232-AM-ECB

Manaras Trolley Operator 1/2 HP 208V 3Ph Monitored Elect. Circuit Board Apt. Model

  • The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
  • 100 cycles per day
  • It incorporates a drum-shoe type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • #41 full roller chain
30B652

LiftMaster Capacitor 89uF 120V

  • Also known as: K030B0652-1 30B0652 030B0652-1 030B0652
ME110-C3

Miller Edge Black Rigid PVC Mounting Channel Double-Sided Tape Sold by the Foot

  • 7/8" length
SL585151UL

LiftMaster Industrial Slide Gate Op. 1.5 HP 120/208-240VAC 1 Ph Heater NOT Incl.

  • SL585UL features a heavy- duty industrial lockable metal cover.
  • Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
  • Manual Disconnect when unlocked allows gate to be operated manually.
  • Quick Close and Anti-tailgate quickly secure property preventing unauthorized access.
  • Lockout/ tag-out Feature prevents power from being switched on when servicing operator and safeguards workers from high-voltage power.
  • Automatic Solenoid Brake prevents the gate from being back driven.
    • .......more details
RESET002

Manaras Resettable Overload Fuse 5A 1 Phase

LA500CONTUL

LiftMaster Standard 24VDC Control Box for Single and Dual Gate Applications Batteries Incl. UL325

  • Complete control box for new LA500U 2018 UL325 compliant
  • Includes box control board and batteries.
813LMX

LiftMaster 3-btn Dip-Style Transmitter Sec+ 2.0

  • Encrypted DIP style three-button remote control with Security+2.0 technology
  • Ideal for applications such as gated communities or commercial applications requiring a large number of remotes for a common entrance
  • Easy to code 12-position DIP switch offers up to 4096 codes
  • May also be programmed for Open/Close/Stop functionality
  • Narrow band transmission on 3 simultaneous frequencies (310 315 390 MHz)
  • Compatible only with Security+ 2.0™ commercial receivers and operators
    • .......more details
Programming instructionsInstructions de programmationProduct Guide
041-0041

LiftMaster Camera with Decorative Cover

  • Fits model 87504
TRACK-SET-3-134-8

3" Tracks Set 8'-0" Torsion 1-3/4" Door Clips for Wood Frame 15" Radius *** By quote only

TRACK-SET-3-134-12

3" Tracks Set 12'-0" Torsion 1-3/4" Door Clips for Wood Frame 15" Radius *** By quote only

3SL-15R-HORIZ-8

Horizontal Track Set 3" SL 15" Radius 8'-0" Door (2 pcs)

  • Set of 2 horizontal tracks 9'-6" 13g
BEA-10-LBA

BEA LZR Metal Bracket Accessory

  • Mounting bracket only for the LZR industrial sensors including: LZR-I30 LZR-S600 LZR-H100 LZR-U920/U921
1KXS

Key Switch O/C w/Stop Btn Tamper Proof Nema 4 Surface Mount

  • OPEN-CLOSE with Center Return Key Switch with Stop Button Mortise Cylinder Tamperproof
  • Dimensions: H=4-3/8 W=4-1/8"" D=2-5/8""
  • Randomly keyed
RCB-60100

Roller Chain Break #60 thru #100

TRACK-SET-2-134-7

2" Tracks Set 7'-0" Torsion 1-3/4" Door Clips for Wood Frame 15" Radius *** By quote only

91567

Marantec Sprocket Holder Assbly Standard Belt Rail

  • Compatible with Belt Standard Rail
  • For Marantec belt opener models: Synergy 260 Synergy 270 Synergy 280 Synergy 360 Synergy 370 Synergy 380 Synergy Solo M50 M55
  • Not for use on the heavy duty 1.2mm - 18 gauge rails
  • Measures 5"x2-3/4"x1-1/4"
111087.0001.S

Overhead 1 Phase Transformer

658206

LiftMaster Exterior Pneumatic Treadle Kit 10ft

  • Outdoor Enclosure (NEMA 4/12)
  • Includes 10 feet of signal hose outdoor air switch and hose plug
  • OPEN (all operators) when the vehicle passes over treadle hose. The weight of the vehicle on the treadle hose activates a pneumatic switch which sends an open signal to the door. Requires a 2-wire connection to the operator but does not require power to function.
T108

Manaras Trolley Track 8ft for 3/4 HP models

  • For models OTH/OTBH/RTBH 3/4hp only with Chain #41
T110

Manaras Trolley Track 10ft for 3/4HP & All APT models

  • For models OTH/OTBH/RTBH 3/4 hp only with Chain #41
TSTRIP001

Manaras 12-Pole Terminal Strip

LEVER092

Manaras Close Limit Actuator

LEVER091

Manaras Open Limit Actuator

5009-523-PAINT

Aluminum Touch Up Paint Nail Polish Style Slate / Charbon # 523

  • Glass bottle and brush applicator
5009-562-PAINT

Aluminum Touch Up Paint Nail Polish Style Commercial Brown / Brun Comm. #562

  • Glass bottle and brush applicator
MA015

LiftMaster Transformer 24V

  • Mega Arm transformer
  • Dimensions: 2-3/4"L x 3-3/16"W x 3-3/8" D
  • Model: 21-33711
  • Line: 1-2/5-6 115/230V 50/60 Hz
  • Load: 7-8/11-12 24V 130VA(SERIES) 7-8/11-12 130VA(PARALLEL)
41D1624-2

LiftMaster Motor DC 12V RJO

  • This 12V DC Motor Kit is compatible with the following LiftMaster® Models: 8500W 8500WLA LJ8900W and LJ8950W
1003-3.5"-200FT

Bottom U-Rubber 3.5" Black 200' Long

  • 200ft spool of vinyl insert.
41A7946

LiftMaster Wiring Harness

  • For use with various LiftMaster® Chain / Belt Drive Garage Door Openers.
D525-54-HL-125

Cable Drum High Lift 54" 1-1/4" Bore Torque Force Pair

  • Maximum hi-lift: 54"
  • Capacity: 500 lbs per drum
  • Max. cable size: 3/16"
  • Cable length: Floor to shaft center 66" minus amount of Hi-Lift
  • Cross reference: DNS 54-125 OMI 54HL-125 M134-1375-125
D-2-6-KA

Keyed Disconnect Device 6ft Cable Keyed Alike (Special Order)

  • Operated from the outside to disconnect the trolley for manual operation of the door
  • Must specify if keyed alike is required or keyed random will be shipped
  • Mounting plate dimensions: 2 1/2” x 1 3/32”
12-12004

LiftMaster 1" Ball Bearing

  • For use with various LiftMaster® Heavy Industrial-Duty Commercial Door Operators
  • Drive shaft bearing used on RBH
  • Same as K12-12004
EXA-1000

Linear Omni-Directional Remote Antenna (AAE00198)

  • The EXA-1000 is a 1/2 wave center fed vertical antenna composed of three parts: an Antenna assembly with an F connector attachment; a Base Plate assembly with radial mounting provisions; and a five-foot 75-ohm coaxial cable.
  • The cable connects to the antenna base on one end and the receivers F connector on the other.
  • If the antenna must be mounted further than five feet from the receiver an extension cable of up to a maximum of 25 feet may be used instead of the five foot cable supplied.
  • Because of the cable resistance the performance of the EXA-1000 may be degraded by using longer than a 25 foot cable
  • Compatible with all Linear receivers with Type F antenna connector
  • Receives signals in 288 to 320 MHz range
    • .......more details
Installation manual
Q055

LiftMaster Limit Switch Kit K75-50189

  • Also known as: Q166 Q165
50-LW1000BLK

Loop Wire Black 1000ft 18AWG

MM00004

Micanan Frame Gearhead MSI0030

WHITING-PWCS

Whiting White Urethane Topcoat Option For ColdSaver Door Panel

  • This is an option when ordering a panel
K75-30737

LiftMaster Disconnect Kit for GH

  • Disconnect Kit Complete with: Disconnect Lever Bevel Gear Yoke Brake Release Actuator Bracket Switch Actuator Disconnect Shaft Tension Spring Sash Chain with Keyring Screws Nuts Flat Washers Lock Washers Cotter Pins and Roll Pin.
  • Compatible with LiftMaster® Model GH Commercial Door Operators.
CLUTCHPLATE004

Manaras Clutch Plate 5/8 Trolley

1104-18FT-GREY

Residential Side & Top PVC Weather-Strip with cap 18' Long - Grey (G)

  • Grey rigid vinyl retainer with Grey flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Full case quantity only (12).
PTM-120V

EMX 7 Day Programmable Timer 120V

  • The PTM is an easy to program 7 day timer that provides secure access to any facility any time.
  • With up to 16 ON/OFF events per day and 15 different daily options.
  • Its DIN rail mount design and wide power supply options (12 24 or 120 Volt) make installation easy.
  • The battery backup saves stored programs in the case of power loss.
  • Select either a 12 or 24 hour clock format to program access times for overhead doors gates and parking barriers.
  • The PTM can reduce the wear and tear on motor controls and extend the life of your equipment.
    • .......more details
Instruction manualSpec sheetComparison guide
EHJ-311-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 115V-1Ph

  • Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
343.155-CUT

Whiting Tongue & Groove Bottom Panel Plain Primer Only 15-1/2" Cut to Custom Size

  • Cut to exact size required ** customer must specify
  • Primer only
  • Does not come with any hardware no retainer no seal
610.9723

Whiting Panel Option for Long Pull Strap 32" L

  • This is an upgrade option when purchasing a door or bottom panel
GUK-BK

Genie Universal Wireless Keypad 41249R

  • Works with most major brand garage door openers. Compatible with Genie Intellicode (rolling code) Genie 12 and 9 switch systems going back to 1988.
  • Also compatible with Overhead Door Chamberlain Craftsman LiftMaster Wayne Dalton Linear Megacode Xtreme Garage Ryobi Sommer and Marantec. •With the Genie Universal Keypad you can control a combination of up to 3 different garage door openers. Each of the 3 openers can be programmed individually of the others so having multiple brands of openers controlled by a single keypad is not a problem.
  • Powered by two triple-A batteries (AAA)
K87-E-118

LiftMaster E-Ring Idler Shaft

  • Also known as: 87E118 87-E-118 G87E118
  • Commonly used with LiftMaster® SL595 Series; and various Commercial Slide Gate Operators
169026

Euro Center Hinge (25233) Zinc Plated

  • Steel Zinc plated
  • Thickness: 0.098"
  • Pin: 0.276"
  • Mounting holes 0.275"
  • Use with Euro side hinge #169027
169027

Euro Side Hinge (25234) Zinc Plated

  • Steel Zinc plated
  • Thickness: 0.098"
  • Pin: 0.275"
  • Mounting holes 0.275"
  • Use with Euro center hinge #169026
O22R1002

AirLift Airline 3/8" Sold per Foot

O17R1000

AirLift Inline Airline Dryer

PC-3

EMX Infrared Modulated Photoeye Thru Beam

  • Thru beam configuration
  • LED alignment indicator simplifies installation
  • No calibration or sensitivity adjustments needed
  • Wide sensing angle for increased reliability
  • 30 ft. operating range
  • Housing: Black PVC * Not water tight
    • .......more details
TC3-211-C

Lynx Commercial Trolley Op. 1/2HP 120V for 14' High Door Contactor

HYBRID-BLK-14

Residential Side & Top PVC/Aluminum W/S with cap 14' Long (169") - Black

  • Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with aluminum slide-on cap to hide screws.
HYBRID-BLK-7

Residential Side & Top PVC/Aluminum W/S with cap 7' Long (85") - Black

  • Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with aluminum slide-on cap to hide screws.
65-52081-16

LiftMaster Dual Trolley Mod. #41 Chain for 16ft High Door Includes (2) 16' (Actual length 227") tracks and (1) Round Bar 240"

  • Provides drawbar-type operation on very wide (over 22 ft) standard lift sectional doors where a side-mount op. is preferred over a drawbar op.
  • Includes 16ft tracks Round Bar 1" x 20'
  • For H/J/GH
K77-10897

LiftMaster Mounting Bracket Disconnect (Chainkeeper) H MH GH SD

  • Also known as: 10-10893 107011 10-40463 1010893 109027 K77-10704
19-41240D-NP

LiftMaster Drive Chain #41 10' Box Nickel Plated

  • #41 chain 240 links
  • Complete kit includes: Drive Chain 10' (#41) and (1) Master Link Kit.
71-17148

LiftMaster Fuse Link Kit FDC

  • Fuse Link Replacement Kit for use with various LiftMaster® Fire Door Commercial Door Operators and Commercial Access Solutions
K13-36117-1

LiftMaster Cludge Cover for RSW CSW

  • Protects cludge assembly
  • Hard cover sloped front beveled edges
  • Compatible with LiftMaster RSW12UL CSW24UL
K77-39428

LiftMaster Replacement Cover CSW24UL

  • Cantilevered cover
  • Includes labels keys cam-lock assembly
  • Sliding-latch door for reset switch
  • Protects internal gate operator components from exterior tampering weather damage
BK027/PR

Commercial Bottom Bracket 1-3/8" 2"or 3" Inside Hook Up BB-4 Sold as a Pair *Includes (1) Right and (1) Left Bracket (2) Clevis Pins (2) Cotter Pins*

  • Includes 1 left and 1 right hand bracket
  • BB-4 SF
SHAFT105

Manaras Limit Shaft 5/8"-24 UNEF LG

SR-9004-BLACK

Elton Reverse Angle Clip-On Vinyl Black 200ft Roll

  • Side Use – Clips onto Steel Jamb
  • Also for Residential Use
SF600S-LEFT

Spring Fitting 6" Pair Stationary + LHW 1" Shaft

  • Cones for 6" ID Left Hand Wound spring wire
  • Not universal thread
HDSW24UL

Liftmaster Heavy-Duty Variable Speed Swing Gate Op. 24VDC Heater Not Incl.

  • Includes safety device LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflect
  • Features battery backup that provides up to 45 cycles or 120 days of standby power
  • Smooth Start/Stop Operation and mid-travel reversal extend operator and hardware life.
  • Heavy-Duty Commercial Gear-Driven Transmission provides unsurpassed reliability.
  • myQ® Technology enables you to securely control and monitor your gate operator from anywhere
  • Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
    • .......more details
SG-13-NO/NC

Telco Light Curtain with Rectifier w/ Normally Open/Normally Closed Contact 72"

  • 1-10 metre sensing range
  • 16 to 56 parallel scanning beams
  • Active height of 720 mm to 2520 mm
  • Length of 868 to 2668 mm
  • 3 different channel placement models
  • Cable or plug connection
    • .......more details
SPR50B42X114

Sprocket 50B42 1-1/4" shaft 1/4" KW

  • 42 tooth sprocket for #50 chain
K72-12564

LiftMaster Output Shaft Kit H Prior to 2005

  • Also known as: 308116010 308116010HK
T107

Manaras Trolley Track 7ft for 3/4HP models #41 Chain *Actual length 114"*

  • For models MGT/OTH/OTBH 3/4 hp only with Chain #41
25E10272

Truck Door Stud Plate for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors (2 Stud)

  • Steel construction Black E-coat finish
  • Stud plate for 2 stud
  • Cross Reference: W #2032
K20-1050C-2PSF

LiftMaster Electric Motor 1/2 HP 115/30V 1PH CF

  • Replacement electric motor for fire door op
E/1929/072

Automatic Systems Round Arm Ass'y 18" (BL229)

  • Used on the BL229 gate op.
SPR41B9X5/8

Sprocket 41B9 x 5/8" Bore 3/16" KW 2S 1/4-20 CR

SHAFT104

Manaras Clutch (Input) Shaft for Opera H

426-0913

Richards-Wilcox Galvanized End Cap T175-24" LH

GDI-UL325-EYES

GDI Photo Eyes for Monitored Operators N4

GTO-R550

Nortek Replacement Swing Gate Control Board

ET1820PPAS-1

Carlo Gavazzi Through Beam Reciever 20M Plug

  • High power through-beam photoelectric switch.
  • Range up to 20 m.
  • Easily adjustable sensitivity with 270° potentiometer.
  • LED output indication.
  • Precise detection through narrow beam.
  • Short M 18 metal housing for heavy duty applications. IP 67.
    • .......more details
ET1820-1

Carlo Gavazzi Through Beam Emitter 20M Plug

  • High power through-beam photoelectric switch.
  • Range up to 20 m.
  • Easily adjustable sensitivity with 270° potentiometer.
  • LED output indication.
  • Precise detection through narrow beam.
  • Short M 18 metal housing for heavy duty applications. IP 67.
    • .......more details
RADIO-EM102

Manaras Mini 3-btn Rolling Code transmitter 390 MHz

  • Field Configurable
  • Hand Held or Keychain three button
  • Rolling Code Technology
  • 1 Door (SD) Open/Close/Stop or Multiple Doors (MD) 1-3 single-button field selectable
  • Config. Trad. Comm. Sesquence or Alternating Sequence (SBC) Open/Close/Stop (with ECB)
  • Nema 1
    • .......more details
19-80HL-NP

Half (Offset) Link #80 Nickel Plated

  • For #80 chain
19-60ML-NP

Master Link #60 Nickel Plated

  • For #60 chain
7-22-1

Replacement Cylinder Zinc Includes 2 Keys

  • Includes 2 keys Screws Backer Plate and Outer ring