Devanco Canada - Get The Right Garage Door Opener‎ and Parts

50ACTWF

LiftMaster Receiver Logic Board AC WiFi*** Discontinued and replaced by the 050ACTBMC

This is a 315MHz Security+ 2.0® Receiver Logic Board featuring Wi-Fi with MyQ® technology.
For use with various LiftMaster® and Chamberlain® AC Chain or Belt Drive Garage Door Openers; manufactured after 2011.
The unit will feature a yellow learn button
Also known as: 1D8088-1 045ACTWF 1D8808-3 041D8088 50ACCL5
Same as 050ACTWF
1 Year Warranty

50DCTWF

LiftMaster Receiver Logic Board DC. WiFi *** To extent of Inventory

Board: Tri-band Security+ 2.0l
Fits: 8550W
001D8363
Same as 50DCBL5 001D8363 041D8169 1D8169‑2 001D8214 1D8169‑1 1D8169 1D8363

ST-CLEAR-TUBE

Soft Touch Clear Tubing Sold per Foot

CP-BRG-1

Lynx Bearing 1"

2 in total on a MCJH

27-8004-K

LiftMaster Aux. Contact Block Relay

2-NO/ 2-NC Contacts
Used on 03-8024K contactor

LVB420-11

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

K-MALED-HDWCB

LiftMaster LED Barrier Arm Hardware Kit

Service kit to connect new LED arm to existing barrier gate
Includes bolts 3" (2) nylon nuts (2) washers (2) 1/2" watertight connector 48" extension cable for breakaway connector "Y" cable and 12 Vdc power supply

10-10875

LiftMaster Disconnect Lever H MH J **to extent of inventory

MK00643

Micanan Auxiliary Apt. Circuit Board for Red/Green Light Feature 115V Models Field Install

Auxiliary device logic board
Controls red/green lights
Provides Normally Open dry contacts for fully open or close positions
Normally Open dry conatcs for door opening or door closing cycle
Works on circuit boards: MK00641 MK00642 MK00701
Includes installation hardware

.......more details

Instructions Manual

15-19478

LiftMaster Sprocket Assembly

For model H (2005-present)
48B32T with hub

420001

Linear Wireless Keypad Multi-Code 300 MHz

Compatible with 300 MHz Multi-Code receivers
4-digit access code
Backlit keys
Weather-resistant keyless entry station transmitter
Easy access to battery
Power: 9-volt battery

.......more details

OSH-6233-CONT-L

Manaras Opera-SH 3/4 HP 208V 3 Ph Contactor Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

CP-LX225

Lynx Enhanced Relay Board

RESET007

Manaras Resettable Overload Fuse 10A 1 Phase

MK-00005

Micanan Cut-Out Limit Switch

SERVICE-6220

Industrial Duty Rolling Steel Non-Insulated Service Door

22 gauge
Max size: 18'4" max std. width 20'4" max std. height
Slate type: Curved
Finishes: Gray White Tan Brown or Galvanized
RAL Powder coat option in 188 colors

CONTACTOR043

Manaras Reversing Contactor Allen Bradley 16A-24VAC

AB #100-C16*10

MH00009

Micanan Flange Bearing 1" ID x 2" OD

2 required per operator

MH00001

Micanan Bronze T-Bushing 3/8" ID

2 required per operator

PEDALU42-HOOD

Aluminum Hood Only No Post for PEDALU42

Hood only No post
High quality aluminum
Boitier pied estau seulement en aluminum

Shop drawing

FGS-634

Devanco Food Grade Silicone 262g

For use in food and industrial plants
Stops squeaks
Prevents sticking and corrosion
Protects rubber mouldings and weather stripping

Safety Data Sheet Fiche de données de sécurité

9372054125

Square Torsion Spring .343 x 5-1/4 x 41.25" with Cones LHW

41.25" long = 160 coils

29-98200

W-Style Universal Drop In Door 98" x 100"

Shipped with hardware loose on each side
98" W x 100" H
Made with 3/4" thick 7 ply exterior grade medium density plywood
Includes all hardware
Other sizes available

23-10916

LiftMaster Interlock Switch SPDT

Interlock switch for LM commercial door openers with hoist disconnects
15A 125/250VAC

17K

Rolling Steel 2" Flat Continuous Cast Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

SLT4-18

Rolling Steel 3" Crowned Slat 18-ga Galvanized

SLT17-20

Rolling Steel 2" Flat Slat 20-ga Galvanized

6X10PO50-RIGID

Devanco Loop 6' x 10' Rigid PVC pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

GH151-L5

LiftMaster Gearhead with Brake 1-1/2 HP 115/230V 1P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

PHOTO-008B

Manaras Non-Monitored Photoelectric Cells Nema 4/12 *** Discontinued

Through-beam type 24V

Installation Manual

.343-6-RH-C

Torsion Spring .343 x 6" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .343 ID: 6" Length: 12 ft

510.3021.00

Whiting Stainless Steel Exterior Hardware Package with #77 Lock for Dry Freight Door

Optional package when a door is ordered. Includes SS rivets and installation.

41A7276

LiftMaster Wear Pads 4/pkg Square Rail Only

Fits square trolley rail only
Same as 183A163

MR00007

Micanan Brake Disconnect Cable 1/16" x 12"L c/w Cable Stop

2 Required per operator

2200-030

Linear Limit Nut

Used on various Linear Gate operators

SPREADER003

Chain Tensioner for 1-1/4" / 1-1/4"

Chain spreader for installation with 1-1/4" operator shaft and 1-1/4" door shaft
Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing

Installation instructions

OGH-6236-ECB

Manaras 2 HP 208V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

Installation Manual Sell Sheet

OPH-6534-ECB

Manaras Opera-H 1 HP 600V 3 Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

T751L5

LiftMaster 3/4 HP 115/230V 1P Commercial Trolley Operator Logic 5 *** No Longer Available

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

20418R

Genie Limit Switch Lead Wire Brown

Brown - Used to connect down limit to sequensor
For Screw drive models

780

Fasteners Hex Head Bolt 3/8-16 x 1-1/2" 500/Box

3/8" bolt has 9/16" head
Max torque = 22
Full thread
Grade 5

CARSENSE-101

EMX Buried Driveway Alert Sensor XC101-LV Probe Sold Separately (CS101)

The CarSense 101 provides a solution for many vehicle detection challenges. Where safety is an issue the CarSense 101 detects moving vehicles in blind areas along a driving path and actuates warning lights.
For access control applications requiring free exit the CarSense 101 detects vehicles and actuates gates overhead doors and other parking barriers.
Controls and indicators are mounted on front panel
Available in 9 - 41 VDC 6 - 29 VAC.
Low 2.5 mA standby current consumption makes it an excellent choice for solar power applications.
Housed in a small relay-type housing

.......more details

Installation Manual Sell Sheet

761

Fasteners Flat Head Carriage Bolt 1/4-20 x 1-7/8" 1000/Box

Full length thread
Max torque = 6

RBH751L5-RH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 ***No Longer Available

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet

H751L5-RH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 115/230 VAC Logic 5 Right Hand ***Replaced by the RBH751-RH

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

BC096.2

Whiting ColdSaver Door Bright Stainless Steel Clad

Include: Track Balancer Standard Hardware and side top & bottom seals.
Replacement for Utility Trailer s/n CS39865

K21-36793

LiftMaster Transformer 208-230/460 Volts 20Va

230/460V PRIMARY 24V SECONDARY 20VA

71B240G

LiftMaster Brake Kit 230/240V with Solenoid Field Install SL585 and SL595

Instruction Manual

MK00785-RATED

Explosion Proof Killark Labeled 3-Btn Pushbutton Control Station

CSA and UL labeled station
Three button O/C/S Nema-7/9
Surface mount

PULLEY014

Manaras Motor Pulley Standard 2" x 5/8" 5L/B

CSW200UL-H3

LiftMaster Commercial High-Traffic Swing Gate Operator with Heater 1/2 HP

First choice for heavy-traffic applications such as large gated communities residential developments commercial complexes and private estates.
Unlike other systems the CSW gate operators are designed with a "non-scissor action" swing arm to greatly reduce the risk of injury
1/2 HP 120V AC power
24V DC board
Built-in model 850LM Security+ 2.0™ Receiver
Highly efficient extremely quiet

.......more details

CSW200UL Manual Sell sheet

480LM

LiftMaster Alternate Mounting / Extension Kit for 3800 3900 8900W 8500 8500W

Enables the opener to be lowered due to obstructed areas and low ceilings
lowers the operator by 6" requires 1-1/2" above the door shaft
Installs quickly and easily
Same as 480LMB

Installation Manual Manuel d'Installation

TH827-12V

Erone 7-Day Timer 12V

12V AC/DC input voltage with battery back-up
Form 'C' relay
Easy to read LCD Display
Manual override button
Ideal to keep a gate open during the day

Programming Instructions Instructions de programmation

69625

Marantec Programming Connector

Programming connector for use with M3 remotes and Wireless Keyless Entry. Also used with M13 Wireless Keyless Entry

GITR-3

Genie Intellicode 3-Button Remote 37517S 390 MHz *** To extent of Inventory

Replaces Series II GIT-1 GIT-2 & GIT-3
Battery Instructions Visor Clip Included
Note: Only the far right of the three buttons (1 dot button) will operate those older Genie Intellicode units built from 1995 through 1997.
If you have a Genie unit built in 1995 1996 or 1997 this is the only remote that Genie presently makes to operate the Genie garage door openers built during these years.
In this special case the remotes can only be used as 1 button remotes and no other multi-button Genie remote is compatible.

Programming Instructions Instructions de programmation

PRO-HHD-5011R-R

Micanan 1/2HP 115V 1P Heavy-Duty Jackshaft with Mechanical Contactor Right Hand (PRO HHDR)

1/2 HP 115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Electro-Mechanical Control Circuit (non-circuit board model)
3-btn open/stop/close (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included
Emergency chain hoist with electrical cut-off for manual operation

.......more details

Installation manual Specification sheet

7470.093

Whiting Side Seal for Insulated Doors 93" Long

Fits Coldsaver and Tempguard

MB-02202

Micanan Electric Motor Only 3/4HP 575V 3PH

Base mount motor fits: T TB APT J EJ H EHJ HHD SD GO MSW

G65_18300

LiftMaster Thermostat Control Heater Fin Type for 115V & 575V Gate Operators

Heater used in BG type gate operators

Installation Manual

K75-18618

LiftMaster Disconnect Kit for Grey SL595

Kit includes: Disconnect support bracket Detent plate Disconnect lever Release yoke Bevel and Disconnect shaft
Works with SL590 and SL595 Gate operators that are painted Grey

BK150/PR

Residential Bottom Bracket BB-100 sold as a pair

For use with 2" rollers
Works on 1-3/8" 1-1/2" 1-3/4" and 2" doors
13 gauge residential bottom bracket that secures to the bottom of the door allowing the cable to be attached to the door for lifting
Same as part number 263

ACT-31B

Linear 1-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz (ACP00879)

Compatible with all Linear access receivers and controllers
Supplied with quick-disconnect key ring
Power: Two CR2016 batteries incl.
Codes: Factory block coded in MegaCode format
RF frequency: 318 MHz
Dimensions: 1.25" W x 2.25" H x .48" D

.......more details

Programming Instructions

AW-12A

Miller Edge Air Wave Switch in NEMA 4 Enclosure

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm
Ambient temperature range: -49F to 180F

.......more details

Instructions Manual Sell Sheet

GREASE

Gear and Rail Grease 3/4 oz Tube *** No Longer Available

A low temperature lithium based grease
To avoid tooth wear premature failure and temperature rise caused by friction by promoting sliding between teeth

.283-2-R

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

309013

Linear 1-Channel Multi-Code Receiver 310 MHz

Three tabs for universal mounting
One N/O relay
Compatible with 310 MHz Stanley and Multi-Code transmitters only.
Operates on 24 VAC power
One channel
Codes: 1024 (set by dip switches)

.......more details

Programming Instructions

7FT-RAIL-CHAIN

LiftMaster 7' chain drive rail 1707LMC - colour code: Green

#48 chain size
Price reflects cost if purchased with an opener

111010.0001

Overhead Door Serpentine VBelt 27"

Serpentine belt 27" long
Fits Genie GCL-T Trolley operator
Some Overhead drawbar models: JST RSX RMX

02-103

Push Button Station 3-btn Surface Mount Metal Housing

PBS-3
Open-Close-Stop
Momentary contact
Nema 1
Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D

K001A6424-1

LiftMaster Circuit Board Assembly Kit 2010 390 MHz

Installation Manual

K001A6424

LiftMaster Circuit Board Assembly Kit 2010 and later 315 MHz

UL325 Replacement circuit board for Medium-Duty Logic Commercial Operators
Used on models MJ MH MHS MT BMT and MGJ (UL325 compliant operators)
315 MHz intergral radio receiver accepts 20 Sec+ remotes or unlimited dip switch

Installation Manual

TUBE_SHAFT_10FT

Hollow Shaft 1" x 10'-10" Galvanized 16 gauge

When ordering order one foot longer that actual door width

365LMC

LiftMaster Universal Plug-in Receiver 315 MHz

Compatible with any garage door opener with a simple 2-wire dry contact
Includes 2-conductor bell wire
Able to accept 8 Security+ transmitters & 1 digital keypad
Compatible remotes; 893MAX 890MAX 892LT 373LM 371LM 374UT 375UT

Programming Instructions Instructions de programmation

374LMC*

LiftMaster 4-btn Sec+ Transmitter 315 MHz - DISC

Compatible with wireless keypad model number 377LMC
Compatible with Liftmaster garage door opener model numbers 3595 3585 3575 3500 3280 3265 3220 3255 3245 3110 1356 1355 1346 1345 ATS2113X ATS2113X-CX HCT501130 LGO50113O LGO50113L LGO50113R LGO50113XR
This transmitter is replaced by 894LT

372LMC*

LiftMaster 2-btn Security+ Transmitter 315 MHz ****Discontinued - Replaced by 892LT**

Both buttons feature Security+ rolling code technology
Compatible with models manufactured from 2005
Second button can learn other shared Liftmaster radio-controlled devices.
Includes visor clip and Lithium battery CR2032
Obsolete as of 9/31/2012 - Replaced by 375LM 892LT or 894LT

K79-15016-1

LiftMaster RPM Sensor Assembly

RPM sensor for Liftmaster Logic Control L2 L3 L4 & L5 Commercial operators

41DB002-2

LiftMaster Circuit Board Assembly *** To Extent of Inventory

Assembly includes: Circuit board end panel and light socket
For belt drive units with two lights such as 3850C
Same as 41A5685

03-8024-K

Reversing Contactor 3-Pole

Reversing contactor with 24 VOLT coil
Dimensions: 3.5" long x 2.25" wide x 2.25" high
Telemecanique part # LC 2K09 107B7

R-831-P

FL-Allstar 1-Door O/C/S Receiver 107480-311 MHz***NLA

This receiver comes in a metal enclosure.
It has three isolated contacts to open close or stop the door. If your operator can be controlled by three button station then our R-831-P receiver and commercial remote controls will work with your operator.
Manufacturer's model number: 190-107480
Dimensions: 9 1/4" x 6 7/8" x 1 1/4".

Programming Instructions - Dip Switch Version Programming Instructions - Learn Button Version

23-10041-1

LiftMaster Double Limit Switch Commercial DP DT

Double limit switch DP DT
For LiftMaster and Micanan operators

12562

Doorlec Lower Brake Shoe - Left

Fits on all Doorlec operators equipped with brake shoes
Use with drum #12561

CP-SW-AT

Lynx Single Limit Switch

PL-A03-NEW-BRD

Lynx Replacement Logic Board New Version

New version board works on operators with a red cover
Replacement logic board for Napoleon/Lynx Proline garage door opener
For openers built June 2008 or later (date code 0806 or newer)
This board does not have a transformer.

H14G03

Hinge #3 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#3 position
Use between sections 3 and 4
Same as part number 243

.......more details

TRANSF142

Manaras Transformer 575-24V 40VA

Transformer 575V Primary 24V Secondary 40VA

LIMIT021

Manaras Single Limit Switch with Flat Lever

Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
Unimax
Snap-action

Limit Switch Chart

RADIO-42

Manaras MCT-4 3-btn O/C/S transmitter 4 doors 313 MHz **Replaced by RADIO-EM932 or MV-00024

Open/Close/Stop remote for 4 doors.
By selecting A B C or D on the rotary switch you can operate any of the four doors.
Comes with LED battery life indicator.
9V battery included.
Can be wall or post mounted.
Must be used with 4 MCR series receivers.

.......more details

Programming Instructions