Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Belt Drive
25-42-270

Extension Spring 7' Door - 270 lbs Orange ** check for availability

  • Double - Loop
  • 25" long 42" stretch 270 lb load
  • Sold individually
Spec Sheet
25-42-60

Extension Spring 7' Door - 60 lbs Brown

  • Double - Loop
  • 25" long 42" stretch 60 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-20308

Truck Door Balancer Bracket End - Curbside for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Cross Reference: W #2523 for #2376 balancer
27-20304

Truck Door Cable Drum and Bearing Curbside (RH) for Whiting Roll-Up Doors

  • Black nylon drum with bearing
  • Cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines Left or Right drum (Left = Red)
  • Cross Reference: 2548
27-20303

Truck Door Cable Drum and Bearing Roadside (LH) for Whiting Roll-Up Doors

  • Black nylon drum with bearing
  • Cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines Left or Right drum (Left = Red)
  • Cross Reference: 2547
27-20301

Truck Door Cable Drum Curbside (RH) for Todco Roll-Up Doors

  • Cast aluminum construction
  • Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines left or right drum.
  • Holds up to 130" door cable
  • Cross Reference: T #59033-1 T #59129-1 W #4013 330100
27-20126

Truck Door Spring Spacer 33" long for Whiting Roll-Up Doors

  • Extruded PVC construction with zinc plated thrust washer.
  • Cross Reference: 2471
26-94522

Truck Door Intermediate Panel (12" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
26-94323

Truck Door Bottom Panel with Seal (13" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
26-40200

Truck Door Head Seal Only 96" Long for Roll-Up Doors

  • Seal molded from long lasting rubber
  • Cross Reference: T #69718 630300
26-40027

Truck Door Bottom Seal 98" Long for Whiting Dryfreight Doors

  • Flexible PVC material
  • Cross Reference: W #1676
26-14322

Truck Door Bottom Panel with Seal (12" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood Primer finish
  • Comes only with bottom retainer and seal (installed)
R5115

Bearing 1" Commercial with Flanged Retainer Football Style

  • 1" Commercial bearing pressed in a Flanged Retainer Football Style
  • Type: Steel Bore: 1"
  • Inner Race Offest: 13/64"
  • Rated Load Cycles: 250 lb @ 10000 cycles (8')
DM32-125

Cable Drum Standard Lift 32' 800-32 (1-1/4") Pair Torque Force

  • 32 ft Standard lift aluminum die cast alloy cable drums for 1-1/4" shaft.
  • Pair includes (1) LH & (1) RH. Color coded: Red=LH and Black=RH.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Maximum Door Height: 32'-1".
  • Rated Lift per Drum: 1000 lbs.
  • Max Cable Diameter: 1/4".
    • .......more details
SF258

Spring Fitting 2-5/8" Pair

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding & (1) stationary.
  • Maximum wire size diameter: .3310".
  • Set screw installed: 3/8"-16 x 1" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on set screws.
  • Winding bar hole 1/2"
    • .......more details
H11G05

Hinge #5 x 11 gauge

  • 11 gauge # 5 hinge - 0.76 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
H11G01

Hinge #1 x 11 gauge

  • 11 gauge hinge #1 - 0.61 lbs
  • Bright zinc-plated
  • For use with 7/16" stem rollers
  • Item code # 224185
CB18B0500

Cable 1/8" 7x19 500' Galvanized

  • Galvanized Cable 1/8" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
Comparison charts
RS1034

Roller 3" Steel 4" stem 10 ball

  • Steel Roller Wheel diameter: 3"
  • Working length: 3.38"
  • Overall length: 4.75"
  • Box qty: 50 Box weight: 35.8 lbs (3-4-10 Steel)
HD3120

Commercial Inside Slide Lock for 2" or 3" track

  • Track use: 2" or 3"
  • Throw: 2-11/16"
  • Offset from inside face of door to lockbar: 1/2"
  • Bright zinc plated steel with spring actuated lock bar.
  • Same as part number 270
BK050/PR

Residential Bottom Bracket Low Headroom BB-5 LHR Sold as a Pair (L & R)

  • Minimum door thickness 13/16"
  • Gauge: .109 Height: 6-7/16"
  • A pair includes one left hand and one right hand bracket.
25-10113**DISC

Truck Door 2" Steel Roller Long Stem for Whiting Roll-Up Doors Use Part # 94-61180-33-84

  • Unplated shaft 10 roller ball design
  • Shaft Length: 6.5" Overall Length: 7.5"
  • Long stem roller has a staked collar design versus machined collar on others.
4X8SC50

Devanco Loop 4' x 8' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
6X10PO50

Devanco Loop 6' x 10' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
4X16PO50

Devanco Loop 4' x 16' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
.393_6"-LH

Torsion Spring .393 x 6" x 12ft LH Orange

  • Wire size: .393
  • Inside diameter: 6"
  • Length: 12 ft
BL229-EX1929/G45

Automatic Systems Rising Barrier Gate with 14'9" Round Arm

  • Orientation of the arm (right or left) must be specified when ordering
F210

NICE Adjustable Synchronised Photocells Thru Beam Includes Metal Housing (F210/ FA1)

  • The beam of the Nice F210 photocells has a horizontal scope of 210° thereby increasing the safety level of the system and simplifying installation: the gate or garage door to be automated quite often slide flush with the wall making it very difficult to position the photocell.
  • The F210 photocells are available with relay output
SLT14-20P

Rolling Steel 3" Flat Slat 20-ga Primed

25-10502

Truck Door Max Strength Steel Keeper for Todco Roll-Up Doors

  • Superior strength heavy-duty cast grade 30 steel Zinc plated finish.
  • Keeper accomodates padlocks and trailer seals
  • Cross Reference: T #6972 280100
MD-00006

Sprocket 41B10 x 3/4" NO KW 2SS 1/4

MIRF-Z2-50

Miller Edge Patriot 2 Photo Eye Fail Safe 50ft Non-Contact

  • Meets current UL325 standards for commercial door and gate operators*
  • Thru Beam technology minimizes false reflective signals
  • Travels with the door
  • Easy to Align
  • No need to stock special sizes - works up to 30 feet wide or up to 50 ft wide depending on the model
  • Convenient - Assemble and install in the field
    • .......more details
T755L5

LiftMaster 3/4 HP 575V 3p Commercial Trolley Operator Logic 5

  • Low profile trolley operator with brake included
Installation ManualManuel d'InstallationSell sheetBrochure
892LT

LiftMaster 2-btn Sec+ 2.0 Learning Transmitter

Programming InstructionsInstructions de programmationSell Sheet
.283_3-3/4"-RH

Torsion Spring .283 x 3-3/4" x 12ft RH White

  • Wire size: .283
  • Inside diameter: 3-3/4"
  • Length: 12 ft
02-411

LiftMaster Pull Switch Assembly Nema 4

  • May be used in two different ways: as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring).
  • In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
  • Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
.295-1-3/4-RH-C

Torsion Spring .295 x 1-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .295 ID: 1-3/4" Length: 12 ft
2376.206.30.930

Whiting Torsion assembly .206 wire size 30" spring length 93" shaft

.262_2-5/8"-LH

Torsion Spring .262 x 2-5/8" x 12ft LH Red/Yellow

  • Wire size: .262
  • Inside diameter: 2-5/8"
  • Length: 12 ft
5X20SC50

Devanco Loop 5' x 20' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
37558R

Genie Belt Drive Sprocket Assembly

  • Complete assembly for the belt sprocket on top of the machine.
  • Works with the following models: IntelliG 1200 and IntelliG 1000
OSH-6214-ECB

Manaras Opera-SH 1 HP 240V 1 Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
SPREADER003

Chain Tensioner for 1-1/4" / 1-1/4"

  • Chain spreader for installation with 1-1/4" operator shaft and 1-1/4" door shaft
  • Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing
Installation instructions
.375_6"-LH

Torsion Spring .375 x 6" x 12ft LH Yellow/Green

  • Wire size: .375
  • Inside diameter: 6"
  • Length: 12 ft
8086.225.325

Whiting .225 x 2-5/8 IN x 32-1/2" Roadside with Cones

  • An original Whiting assembly
3228.1

Whiting 2" Nylon Roller 3" Shaft Stainless Steel

  • This is a Whiting original roller
MF00009

Micanan Hex Head Bolt 1/4" - 20 UNC x 2-1/4" Partial Thread

  • Used on PRO-HHD
  • 1 required per operator
SETR2641AM2KP

Erone 2-Channel Mini Transmitter with Paradox Tag Black 433MHz

  • With built-in Paradox tag
  • Heavy-duty construction
  • Elegant & easy to carry
  • Unobstructed range: 656 ft (200m)
  • 60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
  • Two lithium batteries (CR2016) included
    • .......more details
MOD050N2

Manaras Friction Clutch Mod. #50 Chain 1-1/4 RGH

  • Installed directly on the output shaft of the operator.
  • Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
  • Includes sprocket for #50 chain
  • Operator mounting side must be specified
  • A spreader bar cannot be used in conjunction with this modification
  • This modification applies to RGH ops
    • .......more details
BEA-10BODYGUARD-T

BEA Automatic Overhead Pedestrian Swing Door Sensor

  • Designed to provide threshold protection during the open state
  • Prevents a closed door from opening and an open door from closing when a person is in the detection zone.
  • Adjustments can be made with the BEA remote.
  • Installation height: 9' max (6'6" to 8' recommended)
  • Operating temperature: -22 F to 140F
  • Immune to electrical and radio frequency interference
    • .......more details
K80-5001

LiftMaster Keyway 3/16 x 3/16 x 1-3/4"

  • For use with various LiftMaster® Gate Operators and Perimeter Access Solutions
K72-12532

LiftMaster Output Shaft Kit J

  • Also known as: 308116010J 310-116010J 308116010JK 310116010J
  • Compatible with LiftMaster® Model J Commercial Door Operators
E/1929/023

Automatic Systems Balance Spring Ass'y 5.5 MM BL229

  • Used on the BL229 gate op.
OSH-6114-M-N1-LH

Manaras Opera-SH 1 HP 120V 1 Ph Monitored w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
OTBH-6212-M-N1

Manaras Trolley Operator 1/2HP 240V 1Ph Monitored w/N1 Photoeyes

  • The OTBH is a heavy-duty low headroom trolley operator
  • Designed for use on industrial standard lift sectional doors
  • It incorporates a drum-band type solenoid brake
  • 25 cycles per hour 80 cycles per day
  • 1/2 HP operators come with # 48 (410) roller chain
  • Includes PHOTO-070
    • .......more details
10TD900TR

Transmitter 900mhz Touchless Wireless Converter

  • Allows wireless door activation without the need to run additional wires to easily change existing door configurations from hardwired push plates to touchless door actuators.
  • Microwave doppler technology allows for consistent and reliable detection.
  • For automatic door apllications.
  • Compatible with 10RD900 and 10BR2900 receivers.
  • IP65
  • Nema 4
    • .......more details
GUSSET-MOUNT

Doorlec Gusset Mount Plate Up-Charge (L Bracket)

  • Mounting plate for GH op
PRO-GH-10023U-R

Micanan 1 HP 230V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
31369-114

Doorlec Sprocket 60B12 1-1/4" Bore

31373-114

Doorlec Sprocket 60B36 1-1/4" Bore

MD-00033

Roller Chain #60 10' per Pack

K79-13493B-500

LiftMaster Logic Control Board Assembly (FDO FCC LMPLC 500V CHIP)

  • For use with various LiftMaster® Commercial Door Operator Models
K003-KEY

Replacement Key for 3BXLT Key #3

  • Replacement key only for key #K003
MA005C

LiftMaster Slip Clutch Option Mega Arm

  • This is a replacement slip clutch option for Mega Arm gearbox
TDC1222-16

Liftmaster Commercial 16FT Trolley Angle set (10-5816-P) and #41 chain pack (TDC41-16) ***Actual length 227"***

  • Double Angle Rails for doors up to 16'6" high
  • Includes #41 chain pack
S50E

LiftMaster Small Profile Ends Kit 10 Sets of 2

  • Fast easy to install and cost effective system no glue is required
  • One end for output wire other end with resistor for monitoring
  • Compatible with S50 Small Profile Edge
  • Includes: (10) sets of 2
400-CBAC-EG-115V

FAAC 1042011277 Long (EG) Gate Arm w/Positive Stops 50-1/2" L *** Price by Quote Only

  • 400 CBAC EG Long Arm with positive stops
  • For hydraulic Swing Gate Operator
  • This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system
OTBHW-6112-AM06

Manaras Apt-Style Trolley Op w/Carwash Mod 1/2HP 120V 1Ph Monitored w/N4 Eyes Silencio

  • The Silencio operators have integrated noise reducing enhancements which make it 4X QUIETER than the Premium Trolley Apartment model (OTBH-A.05).
  • A low headroom apartment type garage door operator designed for use on industrial standard lift sectional doors with high cycling daily frequency requirements
  • Mounting (Low Headroom Design): Ceiling-mounted with only 6.25" headroom clearance required below the tracks. For indoor use only.
  • Dimensions: Back Room: door height + 4'5" (1350 mm)
  • Head Room For Tracks: 5.625" (143 mm) above the highest point of door travel
  • Comes with carwash modification and tracks/chain for doors up to 12ft
    • .......more details
GALV-375-334-144-L

Torsion Spring .375 x 3-3/4" x 12ft LH Galvanized Yellow/Green

  • Wire size: .375
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-312-258-144-L

Torsion Spring .312 x 2-5/8" x 12ft LH Galvanized Yellow

  • Wire size: .312
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-306-258-144-L

Torsion Spring .306 x 2-5/8" x 12ft LH Galvanized Red

  • Wire size: .306
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-306-258-144-R

Torsion Spring .306 x 2-5/8" x 12ft RH Galvanized Red

  • Wire size: .306
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-295-258-144-L

Torsion Spring .295 x 2-5/8" x 12ft LH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-273-2-144-R

Torsion Spring .273 x 2" x 12ft RH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-243-334-144-R

Torsion Spring .243 x 3-3/4" x 12ft RH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-225-2-144-LH

Torsion Spring .225 x 2" x 12ft LH Galvanized Orange/Green

  • Wire size: .225
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized
MGH-6536-M-N1-RH

Manaras 2 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
K75-17034

LiftMaster Heavy-Duty Straight Door Arm Assbly

  • For use with various LiftMaster® Logic 4.0/5.0 and DC MAXUM Industrial-Duty and Extended Duty Jackshaft Hoist Commercial Door Operators
K41-0157-000

LiftMaster Cable Tension Monitor Right Side

  • For use with various LiftMaster® MAXUM Series DC 700 lbs. to 2200 lbs. Standard-Duty and Extended-Duty Jackshaft Jackshaft Hoist and Trolley Commercial Door Operators
  • This service kit is compatible with the following MAXUM models: JDC JHDC and TDC.
  • NOTE: Refer to K41-0156-000 for Left-Side Cable Tension Monitor
EMX-1915-1

EMX Single Grey Hood For IRB-MON2/4X2 1 Piece Only

  • Grey coloured metal hood (1 hood)
HRD-288-1

EMX Universal Mounting Bracket L-Shape Black Sold per Piece

  • Fits RET2 MON2 4X2 WEL-RX REFLECTOR-O-EX models
V3564-PER-FOOT

Vinyl Seal 4" Bottom Bead End Grey Sold per Foot

  • Bead diameter 3/16" - 7/32" +/- tolerance
41184R

Genie Transformer

  • Works with Overhead Door Infinity 2000 9020 & 9120
  • Works with Genie 6070H 6070H-B 6170H 6170H-B 6172H 6172H-B 6072
  • Same as: 41184 41184R 41184R.S
41151R

Genie Light Kit Wall Mount

  • Bluetooth Light Assembly for the Genie #6070 & 6170 Wall Mount garage door opener.
  • Replacement light kit for 39945R
0-205679

Linear Proxpad Plus Integrated Prox Reader and Controller w/Keypad

  • Prox.pad™ plus is a fully integrated PC managed single door access system with a stand alone proximity reader and keypad.
  • The prox.pad plus when used on it’s own provides standard access control functionality with the use of it’s two relays and two inputs for request to exit and door position and enhanced system functionality when used with Hub Manager® Professional software.
  • The software allows the management of people and doors through easy to create reports and step by step wizard assisted expanded feature functionality.
  • The software can communicate to the prox.pad plus either through a 485 connection or on a LAN/WAN using the SEG-1 TCP/IP communication device.
  • By utilizing the proximity reader and keypad together a higher level of security is achieved by requiring both to grant access.
  • The prox.pad plus can be directly mounted to a single gang electrical box or to most flat surfaces.
    • .......more details
BEA-35-1555

BEA 50' of Cable Only for LZR Widescan

  • Optional 50 ft cable for use with the LZR-WIDESCAN
ME120-Y-4E-P/FT

Miller Edge Sensing Edge Yellow 4-Wire Monitored End Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
15055

Doorlec Electronic Thermostat 330V B1 Metal

2200-983

Linear Brake and Puck HSLG ***NLA Replaced by 2200-983-UPS

70225.000

Truck Door Todco 2" White Nylon Quiet Roller ** Price by Quote Only

MK00697-UPGRADE

Micanan Fraba N-4/4X Photocells Supplied in Lieu N-1 UPCHARGE

  • Exterior Through-Beam Photocell
  • Sensing Distance 45 Feet
  • UL325/2010 Recognized Component
  • Comes with Sender Receiver and Brackets
  • NEMA 4 & 4X
26141

Doorlec Cam Shaft 9-1/4" x 5/8" (24 x 1.59cm)

15591

Doorlec "C" Clip 5/8"

2BXT

Exterior 2-btn O/C Nema-4 Pushbutton Control Station Non-Metallic

  • Surface mount
  • Non-Metallic
  • Open / Close
SRDRKP

LiftMaster Keypad Smart Reader

  • LiftMaster Smart Readers offer a contemporary appearance and leading-edge feature set to add access control to any door or entrance in your building or community including mobile credentials capabilities.
  • Standard technologies include Proximity (125 KHz) Smart (1356 MHz) and Bluetooth so that customers can migrate to newer secure credentials.
  • BLE communication enables myQ Mobile Credentials within the myQ Community app and ecosystem.
  • OSDP Auto-Connect feature to switch from Wiegand to OSDP when connected to the OSDP port on the CAPXLV2.
  • Accelerometer - based tamper detection
  • Tri-State LED light bar for user feedback
    • .......more details
BEA-10-IXIO-ST

BEA Presence Sensor for Automatic Sliding Doors

  • IXIO-ST is an effective versatile and easy-to-use presence sensor for automatic sliding doors.
  • It can be used for both clear door openings and side-lite protection
  • Precise infrared curtains coupled with visible alignment beams make the IXIO-ST extremely safe and easy to adjust.
  • This state-of-the-art sensor features an on-board LCD screen that streamlines the installation and setup processes.
  • Intelligent Solution :On board microprocessor optimizes data analysis monitors sensor performance and enables system integration
  • Mounting height: 6’6” – 11’6”
    • .......more details
65-5501-12

LiftMaster Bi-Parting Mod Kit 12ft (Includes 19-5118 Chain #41 for 18ft Door and 10-5816-P Track for 16ft Door

  • Includes: 65-5501 Bi-Parting 19-5118 Chain #41 for 18ft Door 10-5816-P Track for 16ft Door
SPR410B12X1

Sprocket 410B12 x K1/4 2S 5/16-18 PH1/4

SD103L5-LH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 208/230/460 3PH Left Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
CAPXSHOOD

LiftMaster Sun Hood for CAPXS Black

  • Sun Hood exclusively for installing with Model CAPXS – Smart Video Intercom S.
  • Provides simple protection for the CAPXS touchscreen for better visibility when mounted in locations with direct sunlight.
  • Fully compatible with the CAPXSTK Trim Kit accessory and CAPXSTK Trim Kit with Postal Lock for a clean aesthetic installation.
  • Dimensions: 6.15” x 4.13” x 4.74”