Devanco Canada - Get The Right Garage Door Opener‎ and Parts

50-104-2

LiftMaster Orange Coil Cord 3-Wire 18-ga 20 ft. Extended Curly Cord

CABLE_532SS-500

Cable 5/32" 7x19 Stainless Steel 500ft

Comparison charts

27-20004

Truck Door Dual-Spring Shaft 93" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
Cross Reference: W #2528

GREASE

Gear and Rail Grease 3/4 oz Tube *** No Longer Available

A low temperature lithium based grease
To avoid tooth wear premature failure and temperature rise caused by friction by promoting sliding between teeth

3-42-2A

Bottom Bracket with Removable Roller Carrier Commercial 3" 1-Hole BB-6 Pair *** To extent of inventory

Sold as a pair (1-left and 1-right)
11-guage
Dimensions: 4-1/2" W x 11" H x 1-3/8" D

.218-2-L

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

109020

Linear 1-Channel Multi-Code Receiver 300 MHz

Three tabs for universal mounting
One "NO" relay
Compatible with 10 dip- swith 300 MHz Multi-code transmitters
Operates on 24 VAC power
One channel
Codes: 1024 (set by dip switches)

.......more details

Programming Instructions

.283-258-R

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound White

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

ER100

Carlo Gavazzi Reflector 4" (100mm) Square

High quality reflector for retro-reflective photoelectric switches
Dimensions: 100 mm x 100 mm 9.2 mm thick

ME123-C

Miller Edge U-Shaped PVC Mounting Channel Sold by the Foot

2" Wide 1-1/4" High

41D794

LiftMaster Replacement Motor with Positioning Sensor

Electric motor for model 3850

Installation Manual Manuel d'Installation

45DCT

LiftMaster Circuit Board

Board: Tri-band Security+ 2.0
DC Chain/ Belt Drive model
Fits: 8360 8550
Also known as; 45DCBR1A 041D7356 1D7356 41DCBC1A 41DCBC3A 41DCCC2A 41DCBC5A 45DCCL5A 45DCCL3A 45DCCL1A 45DCCR5A 41D7356 45DCCR3A 45DCCR1A 001D7356 41DCCC1A 41DCCC3A 45DCJL5A 45DCRL1A 41DCCC5A 45DCRL3A 45DCJL1A 45DCJL3A 45DCBL5A 45DCBL3A 45DCBL1A 45DCBR5A 45DCRL 45DCBR3A 47DCCR1 1D8363 045DCT 45DCBL1 45DCBL2 45DCBL3 45DCBL4 45DCBL5 45DCCL1 45DCCL2 45DCCL3 45DCCL4 45DCCL5 45DCBR1 45DCBR2 45DCBR3 45DCBR4 45DCBR5 45DCCR1 45DCCR2 45DCCR3 45DCCR4 45DCCR5

K001A6424

LiftMaster Circuit Board Assembly Kit 2010 and later 315 MHz

UL325 Replacement circuit board for Medium-Duty Logic Commercial Operators
Used on models MJ MH MHS MT BMT and MGJ (UL325 compliant operators)
315 MHz intergral radio receiver accepts 20 Sec+ remotes or unlimited dip switch

Installation Manual

7FT-RAIL-BELT

LiftMaster 7' belt drive rail 2777BD - colour code: Grey

Price reflects cost if purchased with an opener

535LMC*

LiftMaster Universal Radio Control Receiver 390 MHz **Replaced by 412HMC

Over 100 billion possible codes makes it impossible to duplicate the frequency
Jumper option for momentary or constant relay contact
Specifically for use with most 3-wire systems without a transformer
Accepts up tp 8 Security+ remote control codes and one keyless entry
Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the yellow LED light - Sec+ format
Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required

.......more details

.406_6"-LH

Torsion Spring .406 x 6" x 12ft LH Blue/Yellow

Wire size: .406
Inside diameter: 6"
Length: 12 ft

.343_6"-LH

Torsion Spring .343 x 6" x 12ft LH Blue/Red

Wire size: .343
Inside diameter: 6"
Length: 12 ft

.393_5-1/4"-LH

Torsion Spring .393 x 5-1/4" x 12ft LH Orange

Wire size: .393
Inside diameter: 5-1/4"
Length: 12 ft

.331_3-3/4"-LH

Torsion Spring .331 x 3-3/4" x 12ft LH Red/White

Wire size: .331
Inside diameter: 3-3/4"
Length: 12 ft

972LMC*

LiftMaster 2-btn Security+ Transmitter 390 MHz ***Discontinued

Both buttons feature Security+ rolling code technology
Compatible with models manufactured from 2005
Second button can learn other shared Liftmaster radio-controlled devices.
Includes visor clip and Lithium battery CR2032

823LM

LiftMaster Remote Light Switch Sec+ 2.0 ** To Extent of Inventory

Controls lights remotely
Turn on lights in your garage yard or home with your garage door opener remote control
Use with LiftMaster Internet Gateway to control lights from smartphone or computer
Compatible only with Security+2.0 garage door openers and accessories enabled by MyQ technology

Installation Manual Manuel d'Installation

71AB120

LiftMaster Solenoid Brake Assembly for APT Logic 4

Installation Manual

380LMC

LiftMaster Remote Work Light

For use exclusively with the LiftMaster Wall Mount Garage Door Opener (model 8500)
Provides 200 watts of light with adjustable light time delay
Lights are controlled by opener activation or control panel light button
Add as many lights as you wish – perfect for brightening up a dark garage or workspace

Installation Manual Manuel d'Installation Troubleshooting

41A6095

LiftMaster Electric Motor and Bracket for 3800 / 8500

For models: 3800 3800P & 3800PLD
Also known as 002D1622

41AC050-1M

LiftMaster Electronic Circuit Board Assembly

Assembly includes: circuit board end panel and light socket
For chain drive units with one light
Fits 3245 & 3255
Also known as 41AC050-1 041AC050-1M

29-31244

LiftMaster Relay 24VDC 6-Pin DPST (A & B Relay) All Operators

41A4916

Gel Wire Connectors 19 to 26 AWG 100/ box

T-733

FL-Allstar 3-btn 3-Door O/C/S Transmitter 107477-311 MHz

This transmitter can control (open-close-stop) up to three doors.
It has a eight switches encoder with three positions: + 0 and - .
Manufacturer's model number: 733T (190-107477)
Dimensions: 6 1/4" x 3 3/8" x 1 3/8".

Programming Instructions

41A3489

LiftMaster Complete Trolley Assembly for chain drive

For chain drive models 1984 +
Compatible with Sears Chamberlain

Installation Manual

144C56

LiftMaster Idler - Cable Pulley for chain drive

For square rail assemblies
Same as 144C0056

.273_2-5/8"-RH

Torsion Spring .273 x 2-5/8" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 2-5/8"
Length: 12 ft

50307

Doorlec Cam Shaft Sub-Assembly EHJ ETH ETBH LJH

For models; EHJ ETBH and ETH
Assembly includes: Cam shaft (26140) Oilite (11801) x 2 Sprocket 41B12-5/8" (31118) Flange Bearing (28002) x 2 and nuts.

RA-LPL-KEYPAD

Lynx Wireless Proline Keyless Entry 303 MHz

Illuminated keypad
Weather shutter protects keypad from elements
1 to 6 digit codes for maximum security
Allows for access without remote or keys
Compatible with Lynx residential openers built from 2000+
Mounting screws and 9V battery included

.......more details

Compatibility chart

PL-A03-OLD-BRD

Lynx Replacement Logic Board Old Version ** This item is no longer available (NLA) **

Old version board works on operators with a blue cover
Replacement logic board for Napoleon/Lynx Proline garage door opener
For openers built before 2008
This board has a transformer (the new board does not)

CP-SW-HOIST

Lynx Interlock Switch

H14G05

Hinge #5 x 14 gauge ** To extent of Inventory

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#5 position
Use between sections 5 and 6
Same as part number 245

.......more details

SEA433

Erone Tuned Antenna 433MHz

Increase reception and/or range
11.5ft (3.5m) coaxial cable (RG 58) included
L-Shaped bracket for wall-mounting

SEL2641R433-Z4

Erone 4-Relay Stand Alone Receiver 433MHz

Up to 85 transmitter keys
2 NO relay + 2 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output Relay number 4 can be setup to latched output
Can be used for O/S/C
Power requirements: 12/24Vac/dc

.......more details

Sell Sheet Brochure Wireless System Chart

OSH-6533-ECB

Manaras Opera-SH 3/4 HP 600V 3 Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual Sell Sheet

OPH-6532-ECB

Manaras Opera-H 1/2HP 600V 3Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"

Installation Manual Sell Sheet

DISCONNECT001

Manaras Floor Level Disconnect Lever

RADIO-KIT005

Manaras plug-in receiver for Board 60 or electromechanical operators 390 MHz *** To extent of inventory

Direct ECB plug-in receiver card kit (RADIO RE100B) for on-site installation.
Maximum 16 transmitters per receiver.

RADIO-RE101C

Manaras Factory Installed Mod plug-in receiver for Board 70 operators 390 MHz

Direct ECB plug-in receiver card (factory installed)
16 transmitters maximun per receiver.
Use part # RADIO-KIT004 when adding or replacing on-site.
This is now standard equipment on all Circuit board operators

RADIO-42

Manaras MCT-4 3-btn O/C/S transmitter 4 doors 313 MHz **Replaced by RADIO-EM932 or MV-00024

Open/Close/Stop remote for 4 doors.
By selecting A B C or D on the rotary switch you can operate any of the four doors.
Comes with LED battery life indicator.
9V battery included.
Can be wall or post mounted.
Must be used with 4 MCR series receivers.

.......more details

Programming Instructions

RADIO-15

Manaras MRX-1000 1-Channel 24V Receiver with Commercial Antenna 313 MHz ** To extent of inventory

Controls one operator with MT series transmitters.
Operates on 24VAC.
A LED indicates that the unit has been activated.
Can be installed directly onto the control box of a Manaras operator.
Includes a commercial receiver antenna for increased range.
Will be replaced by RADIO-RE901A

.......more details

Installation Instructions

2705.162_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .162 x 2-3/16" x 18" Long
For Roadside order part # 2704.162*180

8331.96

Whiting Brush Top Seal assembly 96"

Fits Coldsaver and Tempguard

AP5

Linear MegaCode Wireless Access Controller 318 MHz

Ideal for gated communities parking facilities and industrial sites
Easy to set-up and use up to 480 remotes can be programmed with a few keystrokes
Easy to add suspend and delete transmitters through programming mode no transmitter dipswitches to set
Supports 480 block coded transmitters or 238 individual transmitters/wireless keypad entry codes
Supports up to six fully supervised safety edge transmitters
AP-5 replaces Linear's AP-4; AP-5 available for replacement of existing AP-4 units only

.......more details

Programming Instructions

308302

Linear 2-Channel Multi-Code Key Ring Transmitter 310 MHz

Open/Close remote for 2 doors
Compatible with 310 MHz Stanley and Multi-Code receivers
Easy access to battery and coding switches - 10 dip switches
Power: 12-volt battery
Codes: 1024 codes for each channel (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

MDTK

Linear MegaCode Wireless Keypad 318 MHz *** To extent of Inventory Repl. by LPWKP-G

Activates multiple MegaCode receivers
User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
Programming is easy via the keypad; MegaCode receiver auto-learns PIN
Backlit keys for easy viewing
Wall mounting hardware (2 screws and anchors) supplied
Power: 9-volt battery included

.......more details

Programming Instructions

DT

Linear 1-btn Delta3 Transmitter 310 MHz (DNT00002A)

Activates one Delta-3 receiver
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 (set by 8 dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

217436

Linear Drive Sprocket - Chain (HCT)

220499

Linear Drive Sprocket - Belt (HBT)

7953

Whiting Truck Door Hinge Gasket White

RV-300

3" Vinyl Insert for Brush Retainer per foot

Color: Black

200BL

2" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1703

600BL

6" Light Brush Insert 6ft Long

Polypropylene bristles

100BL

1" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1701

4004-8FT

Aluminum Retainer only for Heavy Brush 8' Long 45 degree

For angle application (45 degree)
For use with Heavy Brush

4002-12FT

45 Degree Aluminum Retainer for Light Brush 12' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1003-3"-YELLOW

Bottom U-Rubber 3" Yellow 200' Long

3" yellow vinyl insert 200ft spool.

1019-1-3/8-16'

Rigid Vinyl Bottom Retainer Flat 16' Long

Black - for door thickness of 1-3/8"

1006-2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-1-3/8-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

Black with flexible fin to touch door face.
For door thickness 1-3/8"

1006-1-1/2-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1005-1-1/2-24'

Aluminum Bottom Retainer U-Shaped 24' Long

For door thickness 1-1/2"

DT4A

Linear 4-btn Delta3 Transmitter 310 MHz (DNT00027B)

Activates one four-channel receiver (DR4) two 2-channel receivers (DR2) or four single-channel receivers (DR DRQP or DRM).
Can also be used as remote UP DOWN STOP control for commercial operators with DR-4 receiver.
8-dip switch 64 selectable codes
Same as: DNT00027B or DT4A
310 MHz frequency

Programming Instructions

1003-2-16'

Aluminum Bottom Retainer L-Shaped 16' Long

For 2" thick doors.

1003-1-5/8-16'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

1003-1-5/8-12'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

HSC-600-B

Bench Swager 1/16" - 3/16"

Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
Wire rope cutting capacity 3/16”
Made in Japan

24-HWB-PAIR

Winding Bars Hex 24" Set of 2

Cold rolled hardened steel.
Hex shape keeps the bar from rolling away.
Machined to 1/2" at one end with a 5/8" outside dia. on the other end
Sold as a pair.

1104-8FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 8' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

1104-12FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 12' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

1102-18-BLACK

Commercial Side & Top Weather-Strip 18' Long - Black

Aluminum retainer with black heavy-duty dual fin vinyl.

25-42-300

Extension Spring 7' Door - 300 lbs Tan w/ clip

Double - Loop
25" long 42" stretch 300 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

32-48-50

Extension Spring 8' Door - 50 lbs Red ** check for availability

Double - Loop
32" long 48" stretch 50 lb load
Springs sold individually

25-42-50

Extension Spring 7' Door - 50 lbs Red

Double - Loop
25" long 42" stretch 50 lb load
Sold individually
Rated for 10000 cycles
Same as part number 105

Spec Sheet

94-00002

Truck Door Clevis Pin 1/4" x 7/8"

Zinc Plated finish
1/4" x 7/8"

28-32081

Truck Door 2" Horizontal Track with 8" Radius 120" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 120" Fits door sizes: Greater than 96" high
Cross Reference: W #11-3
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

28-02214

Truck Door 2" Vertical Track and Right Angle Assembly 120" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 120" Fits door sizes: 101" - 114" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-1
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

28-02101

Truck Door 2" Vertical Track and Right Angle Assembly 106.5" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

27-20307

Truck Door Balancer Bracket End - Roadside for Whiting Roll-Up Doors

Steel construction
Plain finish
Cross Reference: W # 2524 for # 2376 balancer

26-40200

Truck Door Head Seal Only 96" Long for Roll-Up Doors

Seal molded from long lasting rubber
Cross Reference: T #69718 630300

26-14523

Truck Door Intermediate Panel (13" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

25E10271

Truck Door Stud Plate for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Stud plate for 1 stud
Cross Reference: W #1370

25E10270

Truck Door Shaft Cover for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Attaches to bottom panel for roller support
Shaft cover for 1 stud
Cross Reference: W #1021

DM54LC

Cable Drum High Lift 54" 400-54HL Pair

54" LC High Lift-LD Aluminum die cast alloy.
3/8"-16x2" hardened cup point set screws installed with red heads.
Color coded: Red-LH and Black=RH. Maximum High Lift: 54"
Maximum Door Height: 120" + High Lift
Rated lift per drum: 275 lbs 550 lb per door max
Maximum cable diameter: 5/32" max

.......more details

H11G12

Hinge #12 x 11 gauge

11 gauge # 12 hinge - 1.00 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

CBB18

Stop & Sleeve 1/8" 100 pair

Includes 100 stops and 100 oval sleeves

H11G02

Hinge #2 x 11 gauge

11 gauge # 2 hinge - 0.69 lbs
Bright zinc-plated
For use with 7/16" stem rollers

CBA18A07

Cable Assembly 1/8" 7x7 102" Sold per Pair

Galvanized cable assembly for a 7ft door. (102" = 8'6")
Sold as a pair

CBC18

Thimble 1/8" - 100 per pkg

8500C

LiftMaster Residential Jackshaft Garage Door Opener *** To Extent of Inventory

MyQ technology enables you to securely monitor and control your garage door opener and houselights with your smartphone tablet or computer
Alerts can be received as email or pop-up (push) notifications on your mobile device so that you always know the status of your garage door and houselights
MyQ mobile app is a free download requiring no annual activation fee requires 828lm
Wall mount design with an ultra-quiet 3/4 HP soft start-soft stop DC electric motor
Frees the garage ceiling of hanging operators and rails and opens up the space for additional storage – ideal for cathedral or obstructed ceilings
Remote light (380LM) delivers 200 watts of light with adjustable light time delay

.......more details