Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Emx Industries Inc.
MRD-1P

EMX Radar Presence Sensor (EMX-1200-1 )

  • The MRD-1P radar presence sensor is used to indicate the presence of a vehicle or person in the vicinity of a barrier arm.
  • It does not discriminate between people and vehicles.
  • It can detect over a range of 1 –30 ft (0.3 – 9.1 m) with the maximum detection distance adjustable via pushbuttons.
  • The sensor will ignore any objects beyond the detection distance.
  • The sensor is extremely accurate measuring distance to within 0.04” (1 mm).
  • The microwave beam is unaffected by rain snow ice fog or sunlight.
    • .......more details
IRB-EXP

EMX Industries Explosion Proof Through-Beam Photocells 1162-1

  • Designed to operate in areas with explosive environments.
  • NEMA 4 and 7 housing
  • NEC Class I Groups B C & D Class II Groups E F & G CSA certified CENELEC certified EExd IIC.
  • Copper free Aluminum with Epoxy finish.
  • Potentiometer range adjustment to allow more precise tuning to site.
  • Through beam design is not affected by shiny surfaces.
    • .......more details
Installation ManualSell Sheet
D-TEK-LP

EMX Industries Low Voltage 11-Pin Single Channel - Dual Relay Loop Detector (2500-1)

  • Power Supply: 12-24 Volts AC/DC
  • Current Consumption: < 9 mA
  • Operating Temp: -40°F to 180°F
  • Surge Protection: Zener Diode /MOV
  • Output Relays (2): 1Amp 30 VDC
  • Loop Input: Transformer isolation lightning and transient protection (1)
    • .......more details
Manual - LP-D-TEKSpec Sheet - LP-D-TEK
LD-11

EMX Base Socket 11-Pin DIN Rail Mountable Black (Was formally Grey)

  • For use with D-TEK detectors (most commonly used)
  • Hourglass shaped
ULT-PLG-D-TEK

EMX Industries Ultra Loop Plug-In Loop Detector Dual Output 2670-1 (Replaces 2500-2346-LP)

  • Trademarked Detect-on-Stop technology
  • Compatible with the Linear (OSCO) with APEX/APEX II controller
  • Also Compatible with -Advanced Access Automation/FAAC CSL2000 CSW2000 RSW1000 -All-O-Matic SL100-DC -Chamberlain/Elite SL3000 CSW200 - Intelligent Systems IQ500 IQ5000 -SECOM Late Model operators with 10-pin Molex connectors -Rotary Gate Systems SL1000R SL1000C SL1000I -TyMetal TYM 1000 TYM 2000 -Viking Access Models L-3 F-1 T-21...
  • Sold-state output indicating vehicle presence
  • Ignore cross traffic in tight spaces
  • Select for automatic sensitivity boost (ABS) delay fail safe/fail secure
    • .......more details
IRB-4X2

EMX Nema 4 Through-Beam Photocells EMX-1250-1 Hood Sold Separately

  • The IRB-4X2 photoeye is used as a safety reversing or opening device in conjunction with automatic operators.
  • The IRB-4X2 will work with any control board that accepts dry contact on the input.
  • The easy to install IRB-4X2 is used with garage doors rolling doors parking barriers and other equipment.
  • *Not for use in applications requiring UL325 compliance
  • Thru beam design is not affected by shiny surfaces
  • Wide 24˚ transmission angle allows easier alignment and increases reliability
    • .......more details
Installation ManualSpecification Sheet
LRS-LC

EMX Logic Controller

  • For use with the Loop Replacement System (LRS-C1) Magnetoresistive Vehicle Detector Control Unit
  • Connects two stand-alone sensors to expand the detection area
  • Works with LRS-DB (LRS-DB-50 or LRS-DB-100) Direct Burial or LRS-FP Flat Pack (LRS-FP-50 or LRS-FP-100)
  • Logic Interface allows one (1) or two (2) sensors to be connected to one (1) output
  • Provides six (6) selectable logic functions and two (2) separate relay outputs
  • A/B directional logic can be selected with an output for each direction of travel as a vehicle passes over two sensors
    • .......more details
LRS-FP-100

EMX Sensor Flat Pack 100ft Wire

  • Lead probe ONLY. Requires the LRS-C1 detector
  • Three-dimensional presence detection of vehicles
  • Select X Y Z axis independently
  • Stand-alone sensor
  • Sensor stores ambient background and settings in non-volatile memory
  • Includes sensor and 100 ft of lead wire
    • .......more details
PROBE-50

EMX CARSENSE-101 Direct Burial Probe with 50' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
PROBE-150

EMX CARSENSE-101 Direct Burial Probe with 150' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
PROBE-100

EMX CARSENSE-101 Direct Burial Probe with 100' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
ETM17-24V

EMX Digital Timer *** No Longer Available

  • The ETM-17 series are panel mount digital timers the can be operated in 12V dc or 24V ac/dc power supply ranges depending on model ordered.
  • The output is a form “C” relay capable of 16A@ 30VDC.
  • Internal battery for memory backup of programming in the event of power failure.
  • Designed with 17 ON/OFF events per day and 15 combinations of daily programs for the best flexibility to the user.
  • Manual or Auto mode
ULT-MVP-2-D-TEK

EMX Industries Multi-Voltage Loop Detector 2-Channel (ULT-MVP-2U)

  • Combines small size with 9VDC to 240VAC input range.
  • Size: 73 x 38 x 78mm
  • ULTRAMETER™ display indicates the appropriate sensitivity setting the vehicle positioned on the loop
  • Ten (10) sensitivity adjustments
  • Four (4) frequency settings
  • Automatic sensitivity boost (ASB) delay fail-safe/fail-secure and infinite or normal (5 min.) presence
    • .......more details
LRS-FP-50

EMX Sensor Flat Pack 50ft Wire

  • Lead probe ONLY. Requires the LRS-C1 detector
  • Three-dimensional presence detection of vehicles
  • Select X Y Z axis independently
  • Stand-alone sensor
  • Sensor stores ambient background and settings in non-volatile memory
  • Includes sensor and 50 ft of lead wire
    • .......more details
KPX-100

EMX Access Control Keypad

  • Stainless steel face with metal backlit keys
  • Anodized and powder coated steel outer housing that is vandal and weather resistant to IP66 (all weather)
  • Dual relay outputs
  • Over 100 Million 4-8 digit codes
  • 12-24V AC/DC operation
  • 100 user codes on Relay 1; 10 users relay 2
    • .......more details
SP-24

EMX Surface Mounted Loop Pad e/Wire Guard

  • Designed to fit between the guide rails in automated carwash systems.
  • Made with durable polypropylene this sealed pad can stand up to carwash detergents.
  • Able to detect up to 30 inches high when coupled with EMX’s line of vehicle loop detectors.
  • Size: 23.75” x 23.75” x 1”
  • Material: black polypropylene
  • Lead-In: 50 feet shielded twisted pair
    • .......more details
VMD202-50

EMX Vehicle Motion Detector Probe with 50ft Lead Wire

  • The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
  • The probe and its electronics are housed in a slim design that is buried next to a driveway.
  • The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
  • Probe assembly and wire are water tight and direct burial compatible
  • Harness is pre-wired onto lead wire for easy installation
  • Settings are placed in a non-volatile memory in case of power failure
    • .......more details
NIR-50

Emx Industries Retro Reflective Photoeye Sensor with Reflector (5250-2)

  • Extended range for better performance in rain and snow
  • Compact design mounting hardware and indicators make it easy to install
  • Lower current draw of only 28mA makes it an excellent choice for solar and low voltage applications
  • Watertight package and optional protective hood offers protection for the NIR-50 from the elements and vandalism
  • Flexible voltage 12 – 240 Volts DC 24 – 240 Volts AC
  • Watertight package for reliable outdoor installation
    • .......more details
IRB-RET-HD

EMX Industries Steel Protective Hoods Only Black Fits Old Style IRB-RET Only *** No Longer Available

  • Protective Hoods for the Universal Retro-Reflective Monitored Photo Eye System (Item #IRB-RET) by EMX
  • Easily installed using the existing mounting holes of the Photo Eye
  • Constructed of zinc plated steel
  • Black powder-coated finish
  • Will NOT fit the new IRB-RET UL325-2018 units
D-TEK-LM

EMX Industries Plug-in Loop Detector for Liftmaster operators ** To extent of inventory

  • Plug-in Loop detector for SL575 SL585 SL595 BG770 BG 79024VAC
  • Works with most LiftMaster gate operators
  • Won't work with Elite Series Mega Arm Slide & Swing
  • Simply plug it into the harness already in the operator
  • Loop lead-in wires connect to operator terminal strip
  • Gold plated control contacts
    • .......more details
Installation ManualSell Sheet