Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Doorlec
21701

Doorlec Limit Switch Single ATM 15 AMP

17330

Doorlec DC-3100R 3-Channel O/C/S Receiver 301 MHz

  • Range of approx. 175ft (53.34m)
  • 8 dip-switches for programming
  • 24/120V selectable
  • Made from polycarbonate plastic for rugged and weatherproof use
  • Includes a built-in antenna to eliminate interference and provide continuous reception
  • A plug-in wiring harness is provided to facilitate interconnection between power supply of operator and receiver
    • .......more details
27024

Doorlec Electric Motor TEFC 3/4HP 115/230V DC403

  • ase mount
Wiring diagram for 120VWiring diagram for 230V
17310

Doorlec DC-3000T2 2-btn Transmitter 313 MHz

  • One block of 10 dip-switches for programming
  • Will activate 2 Doorlec 17307 receivers (DC-3000R)
  • Includes visor clip and 9V battery
Programming Instructions
50430-KEY

Doorlec PBS 2-Btn O/C and Key Switch On/Off Nema 4/12

  • Open / Close with On / Off Key Switch Nema 4/12
  • Green - Open Black - Close
26130

Doorlec Hoist Shaft Threaded 5/8" x 12" GH/GHX

  • Works on GH/GHX
28412

Doorlec Flange Bearing 5/8" Bore Oilite Bushing

  • Works on GH/GHX
RESET-12A-32V

Doorlec Reset 12A 32V Overload

21002

Doorlec Hoist Interlock Switch

50307

Doorlec Cam Shaft Sub-Assembly EHJ ETH ETBH LJH

  • For models; EHJ ETBH and ETH
  • Assembly includes: Cam shaft (26140) Oilite (11801) x 2 Sprocket 41B12-5/8" (31118) Flange Bearing (28002) x 2 and nuts.
EHJX-353-3/4

Doorlec Industrial Jackshaft Op. Explosion Proof 3/4 HP 575V-3Ph ** Price on Request

  • Explosion proof NEMA 7/9 Heavy-Duty Industrial Operator
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse.
  • Solenoid Brake prevents coasting and secures the door when closed
  • Explosion-proof (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
LJH-353-1-RH

Doorlec 1 HP 575V 3PH Jackshaft Operator

  • Model LJH lasts an average of 10 million cycles
  • Available with ⅓ HP to 1 HP single-phase or three-phase motor and is equipped with self-adjusting solenoid brake
  • LJH installation is universal regardless of side (left or right)
  • Speed is approximately 1.4 feet per second or about 0.3 meters per second
  • Comes equipped with a manual chain hoist
50150

Doorlec Electro-Mechanical Safety Edge Sold per Foot

  • For the protection of vehicles doors and safety of people.
  • Any upward-acting door may be fitted at the leading edge with an electro-mechanical safety weatherstrip.
  • This mechanism consists of a formed galvanized steel section covered with vinyl impregnated rubber hinged along the full width of the leading door edge.
  • Can be adjusted to approximately 2½" (63.5mm) to form a tight weather seal.
  • The hinge linkage is arranged that minimum pressure is required to activate the electrical control switch causing door to reverse direction of travel to the fully open position.
  • Reverse switch is enclosed in a galvanized housing with a sliding plunger to assure positive actuation every time.
    • .......more details
29150

Doorlec Transformer 600Vpr 120V sec. 50VA

27120-575V

Doorlec Electric Motor 1/2HP 575V 3PH DC221

27119

Doorlec Electric Motor TEFC 3/4HP 208/480/575V DC423

  • Frame size is 56
VBELT_4L355

Doorlec VBelt 4L 35.5" *** No Longer Available

  • Same as part number 19045
37301

Reversing Contactor RM12 24VAC - *** No Longer Available

  • No longer available.
  • Possible substitution # 37407
EHJ-343-3/4

Doorlec Industrial Jackshaft Op. 3/4 HP 460V-3Ph

  • Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
GH-311-3/4

Doorlec Industrial Gearhead Door Operator 3/4 HP 115V 1-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details