Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search 1
2598

Aluminum 5/16" Cable Eyelet

  • For use on Whiting dry freight and refer doors
  • Use with 1/8" stainless or galvanized cable
218757

Torque Force Spring Failure Device 1" Shaft Left Hand Side DT0054

  • For springs 2" up to 6"
  • This device can be applied on Industrial OH doors that are manual or motor operated
  • Must be installed on a keyed shaft
Z9408

Coupler 1" Bore Adjustable Black 170634

  • Malleable Iron for strength
  • Set screws and jamb nuts installed
  • 1" bore with 1/4" keyway
  • Thickness: 0.50"
  • Painted black
R6000

Shaft Collar 1" with 2 Set Screws

  • Set Screws: 5/16 x 18
SF375-S

Spring Fitting 3-3/4" Stationary Side Only Long Ear 1" Bore

  • Universal thread for use in either LH or RH wound springs.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
  • Winding bar hole 5/8"
SBB-3

3" Safety Bottom Bracket Low Tension Sold as a Pair Torque Force

  • Includes 1-Right hand and 1-Left hand
  • Zinc plated Steel
  • Max Door Weight: 2200 LBS
  • Cable attachment: Fixed
  • Protective cover: No
  • Use with: Straight track 3"
    • .......more details
Installation instructionsInstructions d'installationSpec sheet
172845

Disconnect Chain Hoist Wall Mount 4:1 Torque Force

  • Wall mounting
  • 4:1 reduction
  • Maximum pull allowed on hand chain is 35lb
  • Includes (1) 41B36 sprocket with 1” bore 4’ of #41 roller chain 26’ of hand chain (1) chain keeper (2) set screws 5/16"-18 and limit switch
Sell sheet
RS1311

Roller 3" Steel 11" stem Precision Bearing

  • Steel Roller Wheel diameter: 3" 11" stem length 7/16" stem dia
SF600U-114

Spring Fitting 6" Pair for 1-1/4" Shaft

  • Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
  • Pair includes: (1) winding & (1) stationary.
  • Not single thread.
  • Winding bar hole 5/8"
124773

Roller 3" UHMW 7-1/4" Stem Rubber

  • 3" UHMW tire covered with rubber
  • 6202 sealed precision bearing
  • 7-1/4" zinc plated stem
  • Rating: 200lb load; 10000 cycles of a 12' door
  • Helps quiet the operation of jackshaft operators
124844

1" Nylon Bushing

Z9998

Hand Chain 26' for Torque Force Chain Hoists SAE 1008 Zinc Plated

  • Works with all Torque Force Chain Hoists
D400-144-1

Cable Drum Standard Lift 12' Torque Force Pair

  • 12 ft Standard lift cable drum. Aluminum die cast alloy.
  • Max. door height: 12'-1".
  • Rated lift per drum: 375 lbs.
  • Max. cable diameter: 5/32".
  • Mounting: 1" tube or solid shaft with 1/4" keyway.
  • Cross references: DM413 DNS 4-13 OMI 2100.
    • .......more details
BK010

Commercial Top Bracket Adjustable 1-Bolt Sold per Piece

  • Galvanized steel
  • 12 gauge roller carrier and base plate
  • Adjustment of 7/16" minimum to 2-3/16" maximum
  • Good for use with 3" hardware
HD8460-200

T-Handle Cable Lock System 2"

  • Complete cable locking system for a 2" door.
  • System includes: Auto Latch Striker Keeper T-Handle keyed with 4-1/4" shaft Inside release handle 3/32" cable and all required hardware.
  • Also works for for 1-3/4" doors
H14GHALF

Half Hinge #1 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 1-5/8" wide with slotted holes
BLOCK-YELLOW

Spring Repair Blocks .3175-.3625 Pair

  • For the temporary repair of a broken spring.
  • Wire size: .3175 - .3625
Z9403

Coupler 1" Bore Adjustable Silver

  • Malleable Iron for strength
  • Set screws and jamb nuts installed
  • 1" bore with 1/4" keyway
  • Thickness: 0.35"
  • Painted silver
SF375

Spring Fitting 3-3/4" Pair (Long Ear)

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding & (1) stationary.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
  • Winding bar hole 5/8"
    • .......more details
SF258

Spring Fitting 2-5/8" Pair

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding & (1) stationary.
  • Maximum wire size diameter: .3310".
  • Set screw installed: 3/8"-16 x 1" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on set screws.
  • Winding bar hole 1/2"
    • .......more details