Devanco Canada - Get The Right Garage Door Opener‎ and Parts

CB3160500

Cable 3/16" 7x19 500' Galvanized

Galvanized cable 3/16" 7x19 500ft spool.
Cable break strength: 4200 lbs

Comparison charts

CB5320500

Cable 5/32" 7x19 500' Galvanized

Galvanized cable 5/32" 7x19 500ft spool.
Cable break strength: 2800 lbs

Comparison charts

3-34-1

Low Headroom Quick Turn Top Bracket - Set of 2

Allows the top door panel to turn quicker saving you 2"- 4" more space. Also allows vertical tracks to be cut down up to 2" allowing more room above springs for operator installation in extreme low headroom situation
Sold as a set of 2 brackets
Requires 2 rollers per bracket - rollers sold seperately.
For residential garage doors.
Use with 12" & 15" curve 2" track

HD3120

Commercial Inside Slide Lock for 2" or 3" track

Track use: 2" or 3"
Throw: 2-11/16"
Offset from inside face of door to lockbar: 1/2"
Bright zinc plated steel with spring actuated lock bar.
Same as part number 270

.250_1-3/4"-LH

Torsion Spring .250 x 1-3/4" x 12ft LH Green

Wire size: .250
Inside diameter: 1-3/4"
Length: 12 ft

.243_1-3/4"-LH

Torsion Spring .243 x 1-3/4" x 12ft LH White/Yellow

Wire size: .243
Inside diameter: 1-3/4"
Length: 12 ft

.250_1-3/4"-RH

Torsion Spring .250 x 1-3/4" x 12ft RH Green

Wire size: .250
Inside diameter: 1-3/4"
Length: 12 ft

.243_1-3/4"-RH

Torsion Spring .243 x 1-3/4" x 12ft RH White/Yellow

Wire size: .243
Inside diameter: 1-3/4"
Length: 12 ft

768-500

Fasteners Lag Screw Full Thread Hex Washer Regular Profile 5/16" x 3" 500/Pail

7/16" head
Hex Washer Regular Profile Head

757-325

Fasteners Lag Screw Hex Washer Regular Profile 5/16" x 1-5/8" 325/Bag KH

7/16" head
Ideal for fastening tracks to the wall

24-HWB-PAIR

Winding Bars Hex 24" Set of 2

Cold rolled hardened steel.
Hex shape keeps the bar from rolling away.
Machined to 1/2" at one end with a 5/8" outside dia. on the other end
Sold as a pair.

18-RWB-PAIR

Winding Bars Round 18" Set of 2

Cold rolled hardened steel.
Machined to 7/16" at one end with 1/2" outside dia. on the other.
Sold as a pair.

Z9003-QUIET

Pusher Spring - 27" w/Sleeve 3" Tip Sold as a Pair

Quiet pusher spring 27" long with a large 3" tip and PVC sleeve over tube
11lbs of initial pushing strength per spring+ 3lbs per inch per spring
Sold as a pair. Pair includes 1 LH 226841 and 1 RH 226842

JRGX1

Chain Hoist Jack Shaft JRG V2 1" Shaft Torque Force (126689)

Jack Shaft Mounting plastic guide 4.5:1 reduction
Gear drive
Fits 3-3/8" minimum offset
Includes: 26' of galvanized hand chain - doors higher than 15' require additional hand chain
1 chain keeper
2 shaft collars

.......more details

Sell sheet

H11G08

Hinge #8 x 11 gauge

11 gauge #8 hinge - 0.87 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

871-ZAP

Zap Interface Expansion Module

A plug-in module with the option for additional expansion room for inputting external control devices.
Open Stop Close Common and Cycle input terminals are all provided
A 24VDC output terminal is provided.
If the power supply is overloaded an LED illuminates so you know there is a fault or that a device is drawing excessive current.
Requires 14-20 AWG wiring and plug-in mounting.
Comes with a six position dual direction plug that slides in.

.......more details

CHS401

Chain Hoist Shaft Mount 4:1 JR 4020 Torque Force (126684)

Shaft Mounted Junior Hoist
4:1 Reduced Drive
Sprocket: 41B36. Bore size: 1" diameter
Cross Reference: OMI 4020
Requires minimum 3/8" center line offset.
Set includes: 26' of hand chain 22" of #41 roller chain Chain keeper (2) shaft collars 1/4" square key and a wall stabilizer bracket.

.......more details

Sell sheet

Z9998

Hand Chain 26' for Torque Force Chain Hoists SAE 1008 Zinc Plated

Works with all Torque Force Chain Hoists

761

Fasteners Flat Head Carriage Bolt 1/4-20 x 1-7/8" 1000/Box

Full length thread
Max torque = 6

784

Fasteners Serrated Flange Nut 1/4-20 1000/Box

Serrated flange face to provide locking


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login