Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
DF086.1

Whiting Dry Freight Door 3/4" with Track Balancer Standard Hardware and Side Seals

  • Includes side seal upgrade
GITR-3

Genie Intellicode 3-Button Remote 37517S 390 MHz *** To extent of Inventory

  • Replaces Series II GIT-1 GIT-2 & GIT-3
  • Battery Instructions Visor Clip Included
  • Note: Only the far right of the three buttons (1 dot button) will operate those older Genie Intellicode units built from 1995 through 1997.
  • If you have a Genie unit built in 1995 1996 or 1997 this is the only remote that Genie presently makes to operate the Genie garage door openers built during these years.
  • In this special case the remotes can only be used as 1 button remotes and no other multi-button Genie remote is compatible.
Programming InstructionsInstructions de programmation
41AC050-2

LiftMaster Electronic Circuit Board Assembly 315MHz

  • Fits 3265 PD612C
  • Replaces 41AC150-2 (board only - need to install on exisiting panel)
  • Also known as 41AC050 41AC050-2M
M8-705

Marantec Photoeyes 69190 / 97246

  • Works on all Marantec units
  • Includes brackets hardware and wiring
  • Same as item #86850 97246 used to be M4-705
  • Made in Germany
Installation instructions
5464.96

Whiting Top Seal Coldsaver 96" L 2-3/16" W

7470.093

Whiting Side Seal for Insulated Doors 93" Long

  • Fits Coldsaver and Tempguard
STRUT-2-1/4-18'

Door Strut 2-1/4" Hemmed 18ft Long

  • Reinforcement bar 2-1/4"
G65_18300

LiftMaster Thermostat Control Heater Fin Type for 115V & 575V Gate Operators

  • Heater used in BG type gate operators
Installation Manual
STATION081

Manaras Push Button Control Station 1-Button Nema 4/12

  • 1-button 1 N/O contact
  • Plastic
DS-KIT

Linear Single Delta Radio Kit ** Discontinued

  • Kit includes one DT transmitter and one DR receiver
  • Same as: DNP00011
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Installation Manual
25605R

Genie Inner Slide Kit for Chain Drive Models

  • The innerslide attaches to the chain and connects the carriage to the chain
  • Works on the following Genie and Overhead Door models:
  • IC250 PMX80 PMX500-IC/B IC250/B PMX85 ALC Series PMX60 PMX300-IC/A RCD Series PMX65 PMX500IC/A PMX75 PMX-IC/B
  • SP99 – SP SERIES LD100-500-100A-550A LAD125-555
  • CM6000-6000A-60-70-80-60S
  • OHD-696 696CD + Others
    • .......more details
MX00149

Micanan Complete Clutch Shaft Assembly for PRO-H

59LMC

LiftMaster Outside Keyswitch ** To Extent of Inventory

  • 12 tumblers provide double locking action
  • Self cleaning barrel weather-resistant aluminum plate
  • Cannot be shorted out from exterior with key
  • One "NO" contact used to activate the door operator
  • Includes two keys
Installation Manual
K75-18618

LiftMaster Disconnect Kit for Grey SL595

  • Kit includes: Disconnect support bracket Detent plate Disconnect lever Release yoke Bevel and Disconnect shaft
  • Works with SL590 and SL595 Gate operators that are painted Grey
29-NP712

Lead Acid Battery 12V 7A

OMNI-EXB

LiftMaster Relay Module

1013-1-1/4-24'

Rigid Vinyl Bottom Retainer L-Shaped 24' Long

  • For door thickness: 1-1/4"
1013-1-1/4-9'

Rigid Vinyl Bottom Retainer L-Shaped. 9' Long

  • For door thickness: 1-1/4"
V300-TS

Top Seal Weather Strip 100 ft per Roll

  • For use with bottom retainers installed on top of door.
  • Vinyl: Black
15-50B24LGH

Sprocket 24 Teeth 1" Bore 1/4" Keyway 2-SS

15-50B40LGH

Sprocket 40 Teeth 1" Bore 1/4" Keyway

15-50B18LGH

Sprocket 18 Teeth 1" Bore 1/4" Keyway

STAR450-315

LiftMaster Commercial Access Control Receiver 315MHz *** Discontinued

  • Rapid learn feature programs multiple transmitters in just seconds
  • Ideal for gated communities parking lotsand garages.
  • Works on a tri-band frequency
Programming InstructionsSell sheet
333LMC

LiftMaster 3-btn O/C/S Transmitter 315MHz *** To Extent of Inventory

  • 315MHz dip switch technology
  • Green Yellow and Red buttons for easy identification of open close and stop.
Programming InstructionsInstructions de programmation
85LMC

LiftMaster Plug-In Power Supply

  • Plug-in jack for easy installation on Liftmaster receivers
  • Power input level: 105-135AC 24AC output
41D1739-1

LiftMaster Motor & Travel Module (041-0236-000)

  • For model: 8550
  • Also known as: 41D8006-1 41D1739-1 41D1624-1 041D1624-1 41-0236-000
ME00057

Micanan Clutch Shaft Only for PRO-APT 3/4" x 12-3/4"

  • For model PRO-APT
MH00099

Micanan Bearing

  • Fits PRO-APT and PRO-HHD
  • Requires 2 per shaft
  • 3/4" Bore
MI00007

Micanan Front Idler Assembly for PRO-APT/T

  • For model PRO-APT / T
  • 3/4" x 5.79" LG
83A11-2

LiftMaster Lithium Grease 0.5 oz Tube

  • Same tube of grease as in the 41C4220A kit
  • USE PART NUMBER: GREASE same grease larger tube less expensive
  • Same as K083A0011-1 83A11-2 83A14 83A4 83A8 083A0011-1 083A0011-2 83A11
3AG1

Miniature Fast Acting Glass Fuse 1 Amp 250V (5/pkg) - 766120

BEARING005

Manaras Flange Bearing ID 5/8"

  • Flange bearing for 5/8" shaft
.234-258-L

Cut-to-Length Torsion Spring .234 x 2-5/8" Left Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.225-258-R

Cut-to-Length Torsion Spring .225 x 2-5/8" Right Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.207-258-L

Cut-to-Length Torsion Spring .207 x 2-5/8" Left Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.273-2-R

Cut-to-Length Torsion Spring .273 x 2" Right Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.250-2-L

Cut-to-Length Torsion Spring .250 x 2" Left Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.218-2-L

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
12FT-I-BEAM

LiftMaster 12' I-Beam Rail G3712RV / CD1012

.273-134-R

Cut-to-Length Torsion Spring .273 x 1-3/4" Right Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
107999.0001.S

Genie Motor Pulley for Overhead JST

19-10929

LiftMaster Hoist Chain Sold by the Foot

  • and Chain for LiftMaster commercial hoist operators
1091303602

Overhead 2-btn Transmitter 360 MHz model: 111663-3602

  • OVERHEAD DOOR remote control transmitter 109130-3602 works with 9 dip switch on 360 frequency.
  • Part number has changed to 111663-3602
Programming Instructions
14FT-I-BEAM

LiftMaster 14' I-Beam Rail 3714RV / CD1014

  • I-Beam Chain Drive Rail for model 3595
7FT-I-BEAM

LiftMaster 7' I-Beam Rail 3707CH Colour Code: Yellow

  • I-Beam Chain Drive Rail for model 3595
41A5021-1ATS

LiftMaster Circuit Board Assembly (41A5021-1HATS)

  • Board: Security+ 390 MHz
  • Assembly includes: circuit board and end panel
  • Also includes: 1 Multi-Function wall ctrl panel - 2 wire
  • For: ATS211 & ATS211R
  • For newer model ATS use replacement board 41A5021-9G-315
  • Same as 041A5021-1HATS
    • .......more details
7001-14-W/B

Commercial Side & Top Weather-Strip 14' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
DTKP

Linear Delta-3 Wireless Keyless Entry 310 MHz

  • Activates multiple Delta-3 receivers
  • 1-8 digit PIN
  • Backlit keys for easy viewing
  • Mounting hardware supplied
  • Power: 9-volt battery
  • Codes: 256
    • .......more details
Programming instructions
7FT-RAIL-BELT

LiftMaster 7' belt drive rail 2777BD - colour code: Grey

  • Price reflects cost if purchased with an opener
CR2032

Maxcell 3V Lithium Button Cell

ME113-E

Miller Edge Black End Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
    • .......more details
Installation ManualWorksheetSell Sheet
.406_6"-LH

Torsion Spring .406 x 6" x 12ft LH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 6"
  • Length: 12 ft
.375_6"-LH

Torsion Spring .375 x 6" x 12ft LH Yellow/Green

  • Wire size: .375
  • Inside diameter: 6"
  • Length: 12 ft
.363_6"-LH

Torsion Spring .363 x 6" x 12ft LH Green/White

  • Wire size: .363
  • Inside diameter: 6"
  • Length: 12 ft
.343_6"-LH

Torsion Spring .343 x 6" x 12ft LH Blue/Red

  • Wire size: .343
  • Inside diameter: 6"
  • Length: 12 ft
.331_6"-LH

Torsion Spring .331 x 6" x 12ft LH Red/White

  • Wire size: .331
  • Inside diameter: 6"
  • Length: 12 ft
.312_6"-LH

Torsion Spring .312 x 6" x 12ft LH Yellow

  • Wire size: .312
  • Inside diameter: 6"
  • Length: 12 ft
.319_5-1/4"-LH

Torsion Spring .319 x 5-1/4" x 12ft LH Blue/Green

  • Wire size: .319
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.306_5-1/4"-LH

Torsion Spring .306 x 5-1/4" x 12ft LH Red

  • Wire size: .306
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.295_5-1/4"-LH

Torsion Spring .295 x 5-1/4" x 12ft LH Blue

  • Wire size: .295
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.437_3-3/4"-LH

Torsion Spring .437 x 3-3/4" x 12ft LH Red/Green

  • Wire size: .437
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.295_3-3/4"-LH

Torsion Spring .295 x 3-3/4" x 12ft LH Blue

  • Wire size: .295
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.273_3-3/4"-LH

Torsion Spring .273 x 3-3/4" x 12ft LH Orange/Red

  • Wire size: .273
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.250_2-5/8"-LH

Torsion Spring .250 x 2-5/8" x 12ft LH Green

  • Wire size: .250
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.218_2-5/8"-LH

Torsion Spring .218 x 2-5/8" x 12ft LH Yellow/Orange

  • Wire size: .218
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.306_2"-LH

Torsion Spring .306 x 2" x 12ft LH Red

  • Wire size: .306
  • Inside diameter: 2"
  • Length: 12 ft
.295_2"-LH

Torsion Spring .295 x 2" x 12ft LH Blue

  • Wire size: .295
  • Inside diameter: 2"
  • Length: 12 ft
.250_2"-LH

Torsion Spring .250 x 2" x 12ft LH Green

  • Wire size: .250
  • Inside diameter: 2"
  • Length: 12 ft
.243_2"-LH

Torsion Spring .243 x 2" x 12ft LH White/Yellow

  • Wire size: .243
  • Inside diameter: 2"
  • Length: 12 ft
.225_2"-LH

Torsion Spring .225 x 2" x 12ft LH Orange/Green

  • Wire size: .225
  • Inside diameter: 2"
  • Length: 12 ft
.192_2"-LH

Torsion Spring .192 x 2" x 12ft LH Silver

  • Wire size: .192
  • Inside diameter: 2"
  • Length: 12 ft
.207_2"-LH

Torsion Spring .207 x 2" x 12ft LH Brown

  • Wire size: .207
  • Inside diameter: 2"
  • Length: 12 ft
.218_1-3/4"-LH

Torsion Spring .218 x 1-3/4" x 12ft LH Yellow/Orange

  • Wire size: .218
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.207_1-3/4"-LH

Torsion Spring .207 x 1-3/4" x 12ft LH Brown

  • Wire size: .207
  • Inside diameter: 1-3/4"
  • Length: 12 ft
MK00066

Reversing Contactor Allen Bradley 24V coil

  • Allen Bradley no. 104-C16KJH22-X6
  • Cat. no. 100-C16*10
894LT

LiftMaster 4-btn Sec+ 2.0 Learning Transmitter

  • Liftmaster 894LT is designed for Sec+2.0 and Sec+ applications
  • Replacement for Models 374LM and 974LM.
  • Compatible with the following Sec+2.0 Sec+ Dip-Switch when cloning other Dip-Switches Remote Controls such as: 811LM 813LM - Sec+2.0 331LM 361LM 362LM 363LM 333LM - 315Mhz Sec+ 61LM 63LM - 390MHz Burst Technology.
  • Sends out multiple frequencies on the same code at the same time (Sec+2.0 only) 2 and 4 button options
  • Typically used in gated communities along with a garage door opener.
  • This single remote control will allow you to copy the code used for the gate instead of carrying 2 remote controls in the vehicle.
    • .......more details
Programming InstructionsInstructions de programmationSell Sheet
380LMC

LiftMaster Remote Work Light

  • For use exclusively with the LiftMaster Wall Mount Garage Door Opener (model 8500)
  • Provides 200 watts of light with adjustable light time delay
  • Lights are controlled by opener activation or control panel light button
  • Add as many lights as you wish – perfect for brightening up a dark garage or workspace
Installation ManualManuel d'InstallationTroubleshooting
41D3452

LiftMaster Limit Switch Assembly

  • Compatible with most operators 1986 - current
41AC075-2S

LiftMaster Circuit Board Assembly for Single and Double Capacitor Models 315Mhz

  • Assembly includes: End panel Logic board and Light socket
  • For chain drive units with two lights ie..3575 3585 3595 PD752D and PD758D
R-831-P

FL-Allstar 1-Door O/C/S Receiver 107480-311 MHz***NLA

  • This receiver comes in a metal enclosure.
  • It has three isolated contacts to open close or stop the door. If your operator can be controlled by three button station then our R-831-P receiver and commercial remote controls will work with your operator.
  • Manufacturer's model number: 190-107480
  • Dimensions: 9 1/4" x 6 7/8" x 1 1/4".
Programming Instructions - Dip Switch VersionProgramming Instructions - Learn Button Version
CAM011

Manaras Limit Cam

  • Limit cam for Mountshaft018A 018B
  • 2 cam's required per shaft
CAM004

Manaras Limit Cam

  • Limit cam for Mountshaft009A 018C 018D
  • 2 cam's required per shaft
19-48ML

Master Link #48

  • For #48 chain (#410)
  • Same as #65 chain
41B3869-3A

LiftMaster Trolley Kit for Belt Drive

  • Complete trolley assembly
  • Replaces 41B3869-1
41A4885-2

LiftMaster MVIS Pulley & Worm Gear Assembly

  • Gear and sprocket assembly for belt drive models between 1995-2002
Installation ManualManuel d'Installation
41K4629

LiftMaster CPS Interface Black Box (CPICARD)

  • Allows CPS-U photoeyes to provide a 'NO' contact
  • Interface is included with CPS & CPS-N4
  • Also known as 041K4629 1C4489 41K4629 41C4489 CPI
.406_6"-RH

Torsion Spring .406 x 6" x 12ft RH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 6"
  • Length: 12 ft
.363_6"-RH

Torsion Spring .363 x 6" x 12ft RH Green/White

  • Wire size: .363
  • Inside diameter: 6"
  • Length: 12 ft
.319_6"-RH

Torsion Spring .319 x 6" x 12ft RH Blue/Green

  • Wire size: .319
  • Inside diameter: 6"
  • Length: 12 ft
.306_6"-RH

Torsion Spring .306 x 6" x 12ft RH Red

  • Wire size: .306
  • Inside diameter: 6"
  • Length: 12 ft
.421_5-1/4"-RH

Torsion Spring .421 x 5-1/4" x 12ft RH Gold

  • Wire size: .421
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.437_3-3/4"-RH

Torsion Spring .437 x 3-3/4" x 12ft RH Red/Green

  • Wire size: .437
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.331_3-3/4"-RH

Torsion Spring .331 x 3-3/4" x 12ft RH Red/White

  • Wire size: .331
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.273_3-3/4"-RH

Torsion Spring .273 x 3-3/4" x 12ft RH Orange/Red

  • Wire size: .273
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.283_3-3/4"-RH

Torsion Spring .283 x 3-3/4" x 12ft RH White

  • Wire size: .283
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.243_3-3/4"-RH

Torsion Spring .243 x 3-3/4" x 12ft RH White/Yellow

  • Wire size: .243
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.243_2-5/8"-RH

Torsion Spring .243 x 2-5/8" x 12ft RH White/Yellow

  • Wire size: .243
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.295_2"-RH

Torsion Spring .295 x 2" x 12ft RH Blue

  • Wire size: .295
  • Inside diameter: 2"
  • Length: 12 ft
.262_2"-RH

Torsion Spring .262 x 2" x 12ft RH Red/Yellow

  • Wire size: .262
  • Inside diameter: 2"
  • Length: 12 ft