Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search 1
SNRRLIGHTJHL

LiftMaster Light Bulbs for MiniKey 10/pkg

  • Light bulbs for recessed keypad
  • Same as SN1650029
LD7LP

LiftMaster 10-30VAC/DC Low Power Loop Detector ( 50-DSP7LP )

  • 10-30 VAC/DC low power fail-safe loop detector
  • <2mA stand-by current draw
  • Compact design - ideal for linear actuator control boxes
  • Automatic sensitivity and frequency adjustments
  • Ideal for solar or battery powered gate applications
5001-9-CHARCOAL

Residential Side & Top Weather-Strip 9' Long - Charcoal

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
  • Sold by full case quantity (20)
1104-ASFT-10FT

Elton Aluminum Stiffener for 1104 10ft

  • Prevents the 1104 from buckling in the hot sun
1104-ASFT-16FT

Elton Aluminum Stiffener for 1104 16ft

  • Prevents the 1104 from buckling in the hot sun
HDC-411-RH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Right Hand

  • 1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
  • Solid state circuit board Lynx-6000. Built in 1.5 second delay.
  • 5L V-belt primary reduction #50 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Precision pillow block bearings on output shaft.
  • Fully driven adjustable limit switches.
    • .......more details
Sell Sheet
84284

Marantec Logic Board for Non-EOS Models

  • For use on M Line- M-4500 and M-4700 models.
  • For use on Q Line - 7500 and 7700 models.
  • For use on Martin DC 3500E and DC 3700E models.
  • Replaces 8054216. Special programming needed. Instructions included
GUIDE014

Manaras Chain Guide

OVERLOAD019

Manaras Telemecanique Overload Base

MAW123-BLK-LH

Miller Edge Air-Wave Edge Black Sold per Foot

  • This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
  • When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
  • It has been designed to fit most doors with double track bottom retainers.
  • With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
  • The MAW123 is resistant to flame water and most common greases and oils.
VBELT_4L370

Manaras VBelt 4L 37"

  • Used on MJH models from 1980 - 2000
29200

Doorlec Transformer 208V pr 120V sec 35VA

  • 208V prImary 120V secondary 35VA
MD-00057

Sprocket 50B36 1" shaft 1/4" KW

  • 36 tooth sprocket for #50 chain
50346

Doorlec Electric Switch and housing for Mechanical Edge

LA400DC-S

LiftMaster Residential 24VDC Linear Actuator Secondary Arm Only New Model

  • Secondary Arm Only for LA400
  • All new arms are backwards compatible with the previous model but the LiftMaster branding is different
Installation ManualManuel d'InstallationSell Sheet
37028G.S

Genie Circuit Board for Retail Model 1022 ** Repl. by 39537R.S (no cover)

  • Compatible with Genie 1022 1042 ChainLift 600 and QuietLift 600 models.
  • Purple
97-75000

DOT-C2 Reflective Tape 24" x 2" W 6" Red x 6" White Pattern

  • DOT-C2 certified exceeds NHTSA requirements
  • Highly reflective even up to a 90 degree angle
  • Quick and easy to apply
97-75003

DOT-C2 Reflective Tape 150 ft x 2" W 6" Red x 6" White Pattern

  • DOT-C2 certified exceeds NHTSA requirements
  • Highly reflective even up to a 90 degree angle
  • Quick and easy to apply
4011-12FT

Aluminum Retainer only for Light Brush or Vinyl Insert 12' Long 90 degree

  • For angle application
  • For use with Light Brush or Vinyl Insert.
  • For applications that require dual brush or brush and vinyl
MT-UHF-0-0

AWID Long Range Metal Mount Tag

  • For use with LR-2000 and LR-3000 readers
  • Operating temperatures from -58°F to 185°F (-50°C to +85°C)
  • Reading Distance up to 25 feet
  • Battery not needed passive tag
  • Passive RFID technology with excellent-price-to-performance ratio
  • Proprietary encryption for protection of card data
    • .......more details
IS40P

BEA Presence Sensor

  • Infrared presence sensor for use in industrial applications. The sendor utilizes 40 active infrared spots for reliable detection.
  • Ideal for use on automatic industrial doors vehicle gates/barriers and loading docks.
  • Equipped with 9 pre-programmed pattern configurations for various industrial applications.
  • Various learn time settings allow presence detection to either remain constant or ignore a motionless object after a pre-determined period of time.
  • Mounting height: 8-16'
  • Detection field: 10'x10' at max. mounting height of 16'
    • .......more details
Installation manualSell sheetCut sheet
M3A

Safety Inertia Brake 1" Bore 2283 Torque PCM3AP

  • Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
  • Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
  • Fully resettable and reusable after lockout ocurrs.
  • Commonly paired with commercial safety bottom brackets in sectional door applications.
  • Fits 1" shaft
  • Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.
    • .......more details
M3A Reference ManualM3A Technical Data
GH4416-09-R

Green Hinge #9 12-ga Right Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-08-L

Green Hinge #8 12-ga Left Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-08-R

Green Hinge #8 12-ga Right Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-05-R

Green Hinge #5 12-ga Right Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-04-R

Green Hinge #4 12-ga Right Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-03-L

Green Hinge #3 12-ga Left Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-02-L

Green Hinge #2 12-ga Left Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
ME123-CA3

Miller Edge L-Shaped Aluminum Mounting Channel Sold by the Foot

737

Fasteners Round Head Carriage Bolt 3/8-16 x 3/4" 1000/Box

  • Gr. 5 Zinc
IG2-P1

Miller Edge Pair of Pedestal Mounts for IG2 Eyes

  • Flexible spring loaded pedestal stand
  • 30 degree of flex
  • 27" high from bottom base to photoeye
IG2-EXT-MNT

Miller Edge Wall Mount Extension Bracket

  • 1 ft L x 2" H x 3" W
RS10311

Roller 3" Steel 11" stem 10 ball

  • Steel Roller Wheel diameter: 3"
IG2-K10-50

Invisi-Guard-2 Photo Eye Kit 50ft Battery Powered *** Discontinued

  • The Invisi-Guard-2 thru beam photo optic system sends an invisible beam of light from a transmitting unit to a receiving unit.
  • The light beam is intended to function as a protective line guarding a potentially hazardous zone.
  • When the light beam is interrupted by an obstruction a signal is sent to the motor controls to stop or reverse motion
  • Universal Design Works with Pre and Post 2010 Operators
  • Spans Distances up to 50 feet (model dependent)
  • Time Saving Installation
    • .......more details
Installation ManualSell Sheet
HBFST-BC

Keyed Control Switch with Best Cylinder

  • NEMA 1
  • TAMPERPROOF FLUSH MOUNT
  • TWO POSITION (OPEN-CLOSE) WITH STOP BUTTON
  • CENTER RETURN
  • SINGLE GANG BACK BOX
  • STAINLESS STEEL FACEPLATE
    • .......more details
1104-8FT-CLAYST

Residential Side & Top PVC Weather-Strip with cap 8' Long - Claystone

  • Claystone rigid vinyl retainer with claystone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
156871

Decorative Hinge Yorktown Style 16" Stamped Steel sold per piece

  • 16" hinge strap only
  • Black stamped steel
  • Mounting hardware sold separately
  • Sold per piece
27-48-360

Extension Spring 8' Door - 360 lbs Brown

  • Single - Loop
  • 27" long 48" stretch 360 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-380

Extension Spring 8' Door - 380 lbs Gold

  • Single - Loop
  • 27" long 48" stretch 380 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-220

Extension Spring 8' Door - 220 lbs Green with clip

  • Single - Loop
  • 27" long 48" stretch 220 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-180

Extension Spring 8' Door - 180 lbs Gold

  • Loop ends
  • 27" long 48" stretch 180 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-130

Extension Spring 8' Door - 130 lbs Yellow

  • Single - Loop
  • 27" long 48" stretch 130 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
H12G06-SS

Hinge #6 x 12 gauge Stainless Steel **NLA

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H12G04-SS

Hinge #4 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H12G05-SS

Hinge #5 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
K94-36408-1

LiftMaster Reset Switch LA500 with ID Resistor

  • For use with LiftMaster LA500 Series swing gate operators
  • Includes ID resistor kit
  • Includes LA500 product ID
K20-1100C-2TLP

LiftMaster Electric Motor 1 HP 115/230V 1Ph TEFC Logic

15-3619

LiftMaster Sprocket 50B19T 1-1/4" x 1/4" 2-SS

BRAKE013

Manaras Band Brake Assembly Kit OSH

Installation Manual
MOTOR255-WIRED

Manaras Electric Motor 3/4HP 120/240V 1PH Wired

  • Electric motor comes pre-wired for a brake
  • Must specify if operator has electronic circuit board or if it is hard-wired •This item is compatible with BRAKE011
MOTOR258-WIRED

Manaras Electric Motor TEFC 3/4HP 120/240V 1PH Wired

  • Electric motor comes pre-wired for a brake
  • Must specify if operator is equipped with electronic circuit board or if it is hard-wired
MP-00044

Micanan Drive Chain #40 Modification for Trolley Operators 18' High Door In Lieu of #41

  • Chain modification when purchased with any of the following operators; PRO-T TB APT and GT
9003-13FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 3" Track Bolt On 13' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
SL316-ZP-COPPER

Zinc Plated Copper Sleeve 3/16" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST316COP. Stops are not zinc plated
PRO-HB5011R-RH

Micanan 1/2HP 115V 1P Hoist Operator with Brake and Mechanical Contactor Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Includes solenoid brake
Installation manualSpecification sheet
PD180CBT30Q

Carlo Gavazzi Photoelectric Through-Beam Receiver 30M

  • Receiver only. If emitter is required order PD180CBT30MU
  • For Industrial doors and Gates
  • Range: 30M
  • Relay output
  • Supply voltage receiver: 12-24VAC/DC
  • Dimensions: 180m x 51 x 49m
    • .......more details
Installation Manual
K72-33872-1

LiftMaster Limit Switch Shaft Kit

  • For models MT BMT MJ MH and MHS logic control
  • Kit includes: limit shaft limit nuts limit bearings limit sprocket washers compression ring roll pin and e-ring
21-10340

Transformer 115-24V AC 20VA

  • 120V Primary 24V Secondary 20VA
41D7924-1

LiftMaster Extra Door Sensor for 821LM First Generation **to extent of inventory

  • Liftmaster Chamberlain 041D7924-1
  • Required to add a second garage door opener to your 821LM MyQ Garage.
  • Works on the Liftmaster 821LM and Chamberlain MYQ-G0201
  • Compatible with:
  • Green Learn Button (Billion Code 390MHZ)
  • Models: 1245 12551270 1280
    • .......more details
PRO-LH-5011U-LH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • Designed for use on commercial sectional doors with high or vertical lift
  • May also be used on small rolling grilles with max. 15 cycles per hour
  • Includes chain hoist
  • Includes solenoid brake
  • On board 372 MHz receiver with antenna
  • On-Board receiver holds up to 20 transmitters
    • .......more details
Installation manualSpecification sheet
H753L5-RH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 208/230/460V 3P Logic 5 Right Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
14JW

Rolling Steel 3" Flat Cast Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
14-J

Rolling Steel 3" Flat Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
  • This does not have a RH or LH specification
17K

Rolling Steel 2" Flat Continuous Cast Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
17JW

Rolling Steel 2" Flat Cast Windlock

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
17J

Rolling Steel 2" Flat Cast Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
2JW-D064

Rolling Steel 2" Curved Cast Windlock *** NLA

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
OEB-1

Super Sneaky Operator Extension Bracket

  • Improves installation safety
  • Extends operator rail travel length. Use a 7′ rail for 7’6" – 8′ tall doors
  • Saves extra 2" of headroom required by draw bar type operators
  • Pulls door clear of opening
  • Eliminates garage door overhang
  • Greatly increased installation ease & safety
    • .......more details
70.13

Truck Door U-Bolt 1-1/4" long

  • Zinc plated finish
  • Used to attach cables to Whiting doors
SLT14-18P

Rolling Steel 3" Flat Slat 18-ga Primed

SLT14-22P

Rolling Steel 3" Flat Slat 22-ga Primed

SLT4-18

Rolling Steel 3" Crowned Slat 18-ga Galvanized

SLT4-20

Rolling Steel 3" Crowned Slat 20-ga Galvanized

SLT17-20P

Rolling Steel 2" Flat Slat 20-ga Primed

SLT4-22

Rolling Steel 3" Crowned Slat 22-ga Galvanized

SLT17-22

Rolling Steel 2" Flat Slat 22-ga Galvanized

342.155-CUT

Whiting Intermediate Panel Tongue & Groove 15-1/2" h Cut to Exact Length *** Price on Request

  • Primer only
  • Customer must specify exact length required
342.155

Whiting Intermediate Panel Tongue & Groove 15-1/2" x 96" Price on Request

  • Standard size panel primer only
GH751-L5

LiftMaster Gearhead with Brake 3/4HP 115/230V 1P L5 ***No Longer Available

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
GH505-L5

LiftMaster Gearhead with Brake 1/2HP 575V 3P L5 ***No Longer Available

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
ST532COP

Copper Stop 5/32" 100 Stops per Pkg *price on request

  • Stops ONLY
  • Sleeves sold separately part # SL532COP
44-60-240

Extension Spring 10' Door - 240 lbs Silver ** By Quote Only

  • Clipped ends
  • 44" long 60" stretch 240 lb load
029C98200

W-Style Complete Replacement Door White Stainless Steel Package 029C98200

  • Manufactured to exact size fully assembled tracking and spring assembly included.
  • 98" w x 100" h
  • Price varies according to size
7515.1

Whiting Stainless Steel #77 Lock Handle Keeper

9723S19

Whiting Pull Strap 19" with Stainless Steel Buckle

DF090.2

Whiting Dry Freight Door 3/4" without Track or Balancer

  • Original Whiting dry freight replacement door for serial # 99164
PRO-TB-7511-U

Micanan 3/4HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
K33-51206-315

LiftMaster Radio Receiver Board Elite **DISCONTINUED

  • Fits the Miracle-One gate operator
Q223

LiftMaster Control Board Master / Second (K001A5869) *** Discontinued

  • Replacement control board for the Miracle-One gate operator with two arms - Master / Slave.
  • Same as part no. K001A5869
.306-334-L

Cut-to-Length Torsion Spring .306 x 3-3/4" Left Hand Wound Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
IRB-S

EMX Industries Mounting Screws for Photoeyes Sold as a Set of 2

  • Two sets of screws are required for each bracket installed
.187-2-R

Cut-to-Length Torsion Spring .187 x 2" Right Hand Wound

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
BK311

Jamb bracket J-11 #11 12 gauge

  • Sold by the piece
  • Height 4.75" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK309

Jamb bracket J-09 #9 12 gauge

  • Sold by the piece
  • Height 4.25" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK306

Jamb bracket J-06 #6 12 gauge

  • Sold by the piece
  • Height 3.50" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK302

Jamb bracket J-02 #2 12 gauge

  • Sold by the piece
  • Height 2.50" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK304

Jamb bracket J-04 #4 12 gauge

  • Sold by the piece
  • Height 3.00" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
.319-334-L

Cut-to-Length Torsion Spring .319 x 3-3/4" Left Hand Wound Blue/Green

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-334-Installed
MR00007

Micanan Brake Disconnect Cable 1/16" x 12"L c/w Cable Stop

  • 2 Required per operator