Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search 3-4 HP
SOLID_SHAFT_13'

Solid Shaft 1" Keyed 13 ft Galvanized

  • Actual length is approx. 13'-1"
38476R

Genie Master Belt Drive Rail Extension Kit for 8ft Doors

  • The Genie Master Belt Drive Extension Kit is an extension for C-channel and T-type rails to be used in addition to the 7 ft. (3-piece) rail to accommodate an 8 ft. high door.
  • The extension kit is designed specifically for Genie belt drive openers.
  • Belt and instructions included
  • Compatible Genie SilentMax 1200 SilentMax 1000 QuietLift 800 and BeltLift
MIRM-T2-50

Miller Edge Patriot 2 Photo Eye Monitored 50ft Non-Contact ** Discontinued

  • Attaches directly to a Sectional door.
  • The photo eyes travel below the door during the closing cycle.
  • Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
  • The Patriot2 non-contact system consists of thru beam photo optics.
  • Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
  • The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.
    • .......more details
26-943255

Truck Door Bottom Panel with Seal (15.5" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
K74-34821

LiftMaster Reset Switch

  • Complete with reset button and mounting bracket
K75-34824

LiftMaster Chain Guard Kit

  • Complete with: Chain Guard Chain Guides and Retainers.
K20-3075M-5

LiftMaster Electric Motor 3/4 HP 575V 3P BM/CF ** Replaced by K20-3075M-5-H25

  • Also known as: 20-3075B-5 2030755 K20-3075B5 K20-3075M-5
346

Cable Clamps Galvanized 3/16" Sold per piece

  • Galvanized malleable cable clip
92803N6000

Truck Door .187 x 2.188 x 60 RHW

.343-514-L

Cut-to-Length Torsion Spring .343 x 5-1/4" Left Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-525-INSTALLED
  • If cones are required a filler must be added use part # FILLER
7001-10-CHARCOL

Commercial Side & Top Weather-Strip 10' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
7001-8-CHARCOAL

Commercial Side & Top Weather-Strip 8' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
7001-7-CHARCOAL

Commercial Side & Top Weather-Strip 7' Long - Charcoal 7001-HH (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
345

Cable Clamps Galvanized 1/8" 100/pkg

  • Galvanized malleable cable clip
MGH-6114-ECB-LH

Manaras 1 HP 120V 1P Jackshaft with Elect. Circuit Board Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
Installation manualSell sheet
K77-37986

LiftMaster Current Sense Conversion Kit 3PH L5

CB-1.097

Whiting Stainless Steel Cable 97" L with Plain Grommet 5/16" Eye

1104-7FT-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 7' Long - Light Bronze (F). ***NLA

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
60-7254

Wheel Chock Wall Bracket Anchors 4/pkg 3/8" x 1-7/8"

  • Anchors only. Set of 4
28-03090

Truck Door 1" Vert. Track and Right Angle Assbly Curbside (RH) 96.5" Todco Style**To extent of inventory

  • For Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes right angle frame 1" track and operator bracket
  • Fits doors 72" - 90" high
POCKETWHEEL005

Manaras Pocketwheel Opera

ACT-34D

Linear 4-Channel Block Coded MegaCode Key Ring Trans Prox Transmitter 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Built-in 26-bit Wiegand proximity tag
  • Eliminates need for separate proximity card or tags and transmitter
  • Supplied with quick-disconnect key ring
  • Same facility and ID codes for transmitter and proximity tag
  • Sold in lots of 10
    • .......more details
27-20010

Truck Door Dual-Spring Shaft 96" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
  • Cross Reference: W #2528
27-20003

Truck Door Dual-Spring Shaft 87" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
  • Cross Reference: W #2528
3-32-1

Low Headroom Top Bracket 2" Residential 1 pc

  • For residential door with 2" track
PBTL-3

Exterior 3-Btn O/C/S Control Station with Key Lockout Nema 4

  • Surface mount
  • Metal enclosure
  • Dimensions: 7" H x 2-3/4" W x 3-1/2" D
Sell sheet
K75-12870

LiftMaster Complete Door Arm Kit for Trolley Operators

  • Kit includes: Curved Arm Straight Arm Door Bracket and Hardware
  • For All LiftMaster Trolley Operators except HCT and APT
PBTL3-RED

Replacement Button Only - N/C Stop Red

  • Stop switch and rubber cover for PBTL-3
CB116A0500

Cable 1/16" 7x7 500' Galvanized

  • Galvanized cable 1/16" 7x7 500ft spool.
CB116A0250

Cable 1/16" 7x7 250' Galvanized

  • Galvanized cable 1/16" 7x7 250ft spool.
CS303-FP-100

EMX Car Sense Direct Burial Sensor Flat Pack 100ft *** Replaced by LRS-FP-100

  • Lead probe ONLY. Requires the CS303-C-1 detector.
  • Easy installation above or below ground
  • Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
  • Sensitivity display
  • Single cut installation with flat pack model
K75-10259

LiftMaster Track Spacer Assembly

  • Standard duty trolley operator part
MK-00042

Micanan Overload Reset 1-Phase 13 Amps

NUT022

Manaras Lock Nut Zinc Plated 3/8-16 Hex Nylon

  • Used on old MJH
3950

LiftMaster Jackshaft Door Operator for Comm. Rolling Sheet Doors

  • Designed for commercial rolling sheet door applications only - ideal for self-storage facilities.
  • It may be used on commercial rolling sheet doors with live or dead shaft measuring up to 12 ft. high and up to 14 ft. wide but not exceeding 650 lbs.
  • Maximum recommended duty cycle: 10 cycles per hour.
  • UL-Listed and UL-Labeled to insure compliance to local codes and approval at final inspection
  • Heavy-duty 24V DC motor provides ultra-quiet operation
  • Push button limit setting
    • .......more details
Installation manualSell sheet
28020010-500

Cable Stainless 5/32" 1x19 500' Inox ** Price on Request

  • Not for use in aircraft applications
  • 1x19 contruction type 302 / 304
Comparison charts
28020004-500

Cable Stainless 1/16" 1x19 500' Inox *** Price on Request

  • Not for use in aircraft applications
  • 1x19 contruction type 302 / 304
Comparison charts
82-SB50-08

LiftMaster Shoulder Bolt 3/8"-16x8 **DISCONTINUED

  • Shoulder Bolt
  • For SW470-S3
  • Formerly 82SB5008 G82SB5008
ME123-M-BLK-END

Miller Edge Black End 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
ME123-M-BLK-RH

Miller Edge Black RH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
K74-30754

LiftMaster Battery Harness 1 unit only

  • For LA400
  • 2 harnesses required per operator- 1 for each battery
26CW94325-CUT

Truck Door Bottom Panel with Seal (15" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes only with bottom retainer and seal (installed)
    • .......more details
CHI-SPECIAL

C.H.I. Special Order Door

  • Special order as per customer's requirements
MHS5011U-RH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

  • Designed for use on rolling sheet doors.
  • It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
  • Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
  • Floor level disconnect
  • 24V NEC Class 2
  • Wiring is factory present to C2 mode
    • .......more details
Installation manualSell sheet
17-10363

LiftMaster Pulley 1-5/8" OD 1/2"B 4L Belt

BRAKEPART016

Manaras Brake Pad Assembly MLT MLJ MLH

  • Includes: 1 x BUSHING026 1 X CLUTCHPLATE008 1 X PLATE041
MU22-2WIRE-E-B

Miller Edge MU22 2-Wire End Black - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
7119405

FAAC 400 Plug for End Cap

7019195

FAAC 400 Screw Long Carte

OSH-6533-ECB-LH

Manaras Opera-SH 3/4 HP 600V 3 Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation manualSell sheet
OSH-6113-CONT-L

Manaras Opera-SH 3/4HP 120V 1Ph with Contactor Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation manualSell sheet
MGS20-B-2U-05

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 5ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
MGS20-Y-2U-05

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 5ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
PRO-HBH-7523U-L

Micanan 3/4HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

  • 3/4 HP230V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
FHKS3D-74

Stainless Steel Face Hardware Kit 3" Track Double End Stile 4 Panel 7 Sections

  • Kit includes: Top & Bottom fixtures Center hinges End hinges and Hinge screws.
  • 304L rust-resistant stainless steel
  • 12 gauge
37561R

Genie Belt and Bullet Assembly 7ft

  • For 7' Tall Doors Only
  • Fits the following models: IntelliG 1000 (3024) IntelliG 1200 (4024)
  • SilentMax 1000 (3042) SilentMax 1200 (4042)
ETM17-24V

EMX Digital Timer *** No Longer Available

  • The ETM-17 series are panel mount digital timers the can be operated in 12V dc or 24V ac/dc power supply ranges depending on model ordered.
  • The output is a form “C” relay capable of 16A@ 30VDC.
  • Internal battery for memory backup of programming in the event of power failure.
  • Designed with 17 ON/OFF events per day and 15 combinations of daily programs for the best flexibility to the user.
  • Manual or Auto mode
MC00012

Micanan Gear Reducer PRO-GOHD BHC 63 40:1 56C

ST-ACTIVATOR

Soft Touch Activator

  • Same as ST-PRIMER
  • Used to make the glue dry faster
  • Approx 10 ounces
27-8004-K

LiftMaster Aux. Contact Block Relay

  • 2-NO/ 2-NC Contacts
  • Used on 03-8024K contactor
OPH-6532-CONT-R

Manaras Opera-H 1/2HP 600V 3Ph Contactor Model Right Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
Installation ManualSell Sheet
MARED12

LiftMaster Red LED Light Stip 9.9ft Long ** Discontinued

  • Provides LED visibility on both sides to 12 ft. arm.
MDT-4B

Linear 5-Channel Visor Transmitter MegaCode Block Coded 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Unique ”Extra” top button
  • High visibility operate LED
  • Visor clip included
  • Sold in lots of 10
    • .......more details
Programming instructions
K72-33841

LiftMaster Shaft-Sprocket Assembly Clutch MH

  • Kit includes: Compression spring Cotter pins and Bearing
PBS3-GREEN

Replacement Button Only - Green

  • Replacement button for 02-403P
MK-00011

Micanan Radio Control Terminal Strip

H105L5-RH

LiftMaster Ind. Duty Hoist Op. 1 HP 575 VAC 3 Ph Logic 5 Right Hand W/Brake

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'installationSell sheetBrochure
H101L5-LH

LiftMaster Ind. Duty Hoist Op. 1 HP 115/230 VAC Logic 5 Left Hand W/Brake ***No Longer Available

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'installationSell sheetBrochure
MOUNTSHAFT010

Manaras Hoist Shaft Kit for MJH (pre-1998)

Drawing
26-942255

Truck Door Bottom Panel with Hardware (15.5" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Primer Finish
  • Comes with 18" pull strap assembly two bottom roller shaft covers and stud plates standard lift handle two u-bolts flexible PVC bottom seal and aluminum seal retainer.
    • .......more details
K72-19975

LiftMaster Clutch Shaft and Sprocket Assembly

  • Assembly includes: Clutch shaft 1" keyed flange bearings Dual sprcket 32/14 Splined core sprocket E-ring Compression spring Pulley assembly Washers Thrust bearing Retaining ring Slined hub and roll pin
  • Compatible with DJ J operators
DXR-702

Linear 2-Channel Digital Receiver 315 MHz *** Discontinued

  • A digital receiver with an isolated relay output designed for use with Linear's DX Format transmitters.
  • When the receiver detects a signal from a transmitter programmed into its memory the relay output activates.
  • The relay has four optional output configurations.
  • 32 transmitter capacity
  • RF activity indicator
  • Quick-learn programming
    • .......more details
Installation Manual
CPT210-C3

Miller Edge PVC Mounting Channel "L" Shape Sold by the Foot *** Disc. Repl by ME210-C3

  • Used on CPT-210 extrusion
CPT-210-K5

Miller Edge Non-Monitored End Plug Kit *** Discontinued

  • For use with CPT-210-50 bulk extrusion
  • Kit includes: 5 wired 5 non-wired end-plugs 1oz tube of adhesive
DL91201

LiftMaster HID PROX 1346 ProxKey III *Discontinued Replaced by LMPK3-ST*

  • Pocket size key fob
  • Low cost entry level compatible with HID Prox Readers.
K75-12586

LiftMaster Complete Brake Assembly GH 575V

  • Complete assembly includes: Brake hub kit Brake release lever Brake disk Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Fastener.
Installation ManualManuel d'installation
7001-WG-10-MO

Residential Wood Grain Side & Top W/S Medium Oak 10' Long - Painted Screws to Match

  • Medium Oak retainer with Medium Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
7001-WG-16-DO

Residential Wood Grain Side & Top W/S Dark Oak 16' Long - Painted Screws to Match

  • Dark Oak retainer with Dark Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
7001-WG-8-DO

Residential Wood Grain Side & Top W/S Dark Oak 8' Long - Painted Screws to Match

  • Dark Oak retainer with Dark Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
7001-WG-16-CO

Residential Wood Grain Side & Top W/S Cherry Oak 16' Long - Painted Screws to Match

  • Cherry Oak retainer with Cherry Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
7001-WG-9-CO

Residential Wood Grain Side & Top W/S Cherry Oak 9' Long - Painted Screws to Match

  • Cherry Oak retainer with Cherry Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
PRO-HBH-7511R-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft with Mechanical Contactor Left Hand (PRO HHDR)

  • 3/4 HP 115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Electro-Mechanical Control Circuit (non-circuit board model)
  • 3-btn open/stop/close (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • Emergency chain hoist with electrical cut-off for manual operation
    • .......more details
BP-BE102BP

Contact Block Base Mount NC Contact

  • For use with RC P enclosures. IP65
26CW94322

Truck Door Bottom Panel with Seal (12" x 98") Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes only with bottom retainer and seal (installed)
    • .......more details
K79-13493-2

LiftMaster Logic Board Replacement Kit FDCL

  • Replacement board for fire door model FDCL
TC134-12

Top Cap 1-3/4" 12 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
TC134-9

Top Cap 1-3/4" 9 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
PB-BE101BP

Contact Block N/O Contact

  • Base mount
  • For use with RC P enclosures. IP65
ZT35081029

Firestar Fire Door No. 2 Slat 22-GA White

.295-134-L

Cut-to-Length Torsion Spring .295 x 1-3/4" Left Hand Wound Blue

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
K20-1075B-2P

LiftMaster Electric Motor 3/4 HP 115/230V 1Ph Contactor Model

OVERLOAD019

Manaras Telemecanique Overload Base

MAW123-BLK-U

Miller Edge Air-Wave Edge Black Sold per Foot

  • This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
  • When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
  • It has been designed to fit most doors with double track bottom retainers.
  • With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
  • The MAW123 is resistant to flame water and most common greases and oils.
4-11-7R

Roller 3" 10-Ball 7" Stem Nylon

  • Sealed bearing for long life in dusty conditions
  • 7" stem (working length = 6 1/8")
MK00799

Micanan Smart 10.0 Full Feature Circuit Board Non- Monitored with H.D Relays (MK00701-NM)

  • For 1 HP 110/220V Single Phase 230/380/460V 3 Ph
  • The board does NOT have P1 & P2 terminals
Instructions Manual
MH00009

Micanan Flange Bearing 1" ID x 2" OD

  • 2 required per operator
MK00701

Micanan Smart 10.0 Full Feature Circuit Board Monitored with Heavy Duty Relays

  • For 1 HP 110/220V Single Phase 230/380/460V 3 Ph
  • The board has P1 & P2 terminals
Instructions Manual
K001A6426-1

LiftMaster Control Board with Mounting Bracket for LA412

GH4416-09-L

Green Hinge #9 12-ga Left Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-08-L

Green Hinge #8 12-ga Left Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft