Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search 3
BCSI-PM21

Pivin Drapeau Flat Washer 3/8 Special *** Price by Quote Only

086565.1013.S

Overhead Door Chain RLR #25 x 62P Loop

MCB-DR-SH-ASSY

Lynx Clutch/Drive Shaft Assembly MCB 3/4" x 11-3/4"

  • For trolley operator
GAREX-PAINT-IRN-ORE

Garex Touch-Up Paint Iron Ore

LEDSTRIP004

LED Light Strip (1 Unit) Red/Green/Blue 96" 24VDC

  • An auxiliary output module is required enables connection of 24VDC LED light strips. MODKIT168A is an option
Installation Manual
SHAKER-XL-R16

Garex Ready to Install Door Special Order

  • Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)
  • Panel Height: 18 21 and 24 inches (45 53 and 60 cm)
  • Panel Width: Up to 24 feet (732 m)
  • Texture: Woodgrain
  • Offered in various choices of colours
CLM125-HC

Linear Custom Credential Clamshell Card HID 125kHz Proximity Support 25 pk

  • Made of sturdy ABS plastic Off White
  • Complies with the Wiegand communication protocol and is compatible with certain HID prox card readers
  • Contactless: up to 8" read range
  • Supports printable 14 mil CR80 adhesive-back PVC cards
  • Sold in lots of 25
  • Same as: 830-00420
    • .......more details
OSH-6234-M-N1-LH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
GALV-343-258-R

Cut-to-Length Torsion Spring .343 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-331-258-L

Cut-to-Length Torsion Spring .331 x 2-5/8" Left Hand Wound Galvanized Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
  • Galvanized
GALV-283-334-R

Cut-to-Length Torsion Spring .283 x 3-3/4" Right Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
GALV-250-258-R

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
2806.177*290

Whiting Spring Assby .177 x 2-3/16 x 29" Roadside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 29" Long
  • Roadside
  • For Curbside order part # 2807.177*290
GALV-243-258-L

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
Q061

LiftMaster Cludge Arm Clamp and Handle K75-50121

  • Compatible with various LiftMaster® Swing Gate Perimeter Access Systems
BL229-EX1929-D45

Automatic Systems Rising Barrier Gate with 14'9" Round Arm Right Hand

LZR-MICROSCAN1T

BEA LZR Microscan Kit 1 Door with 2 Microscans Hub & Cables

  • Laser-based sensor system for automatic swing doors.
  • Time-of-flight technology used to eliminate the limitations of infrared-based devices.
  • Background independence eliminates nuisance detections caused by changing conditions while gyroscopes sense the movement of the door for accurate positioning.
  • Provides asjustable pattern depth.
  • Min/max door width: 20"-48" from leading edge of sensor LED
  • Mounting height: 75"-98" from finished floor to sensor LED
    • .......more details
8086.207.320

Whiting .207 x 2-5/8 IN x 32" Roadside with Cones

  • An original Whiting assembly
8087.207.320

Whiting .207 x 2-5/8 IN x 32" Curbside with Cones

  • An original Whiting assembly
GALV-406-6-R

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Galvanized Blue/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • Galvanized
MOD050N2

Manaras Friction Clutch Mod. #50 Chain 1-1/4 RGH

  • Installed directly on the output shaft of the operator.
  • Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
  • Includes sprocket for #50 chain
  • Operator mounting side must be specified
  • A spreader bar cannot be used in conjunction with this modification
  • This modification applies to RGH ops
    • .......more details
MODKIT027

Manaras Universal Aux. Output Module B060 Field Install

  • MODKIT027 for field install simply plugs into the control board
  • Controls several auxiliary devices such as Strobe horn fan lights etc
  • Works with BOARD060
  • Can only be used on operators with BOARD060 pre-installed for operators built prior to October 14 2010.
15-50B32QGH

Sprocket 50B32 1.25 Bore 1/4" w/SS

  • 71-1550B32QGH is a 32 Tooth Sprocket Kit 1-1/4" Bore x 1/4" keyway (50B32-114)
  • For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators
MD00128

Micanan #410 Roller Chain 27 Pitch c/w Connecting Link

K002-KEY

Replacement Key for 3BXLT Key #2

  • Replacement key only for key #K002
RENO-BX4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector

  • The Model BX is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
  • Eight detection sensitivity levels are selectable by means of a front panel mounted rotary switch external dip switches
  • Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep
Installation Manual Sell Sheet
P-9931R

Pulsar 1-Channel Receiver 318 MHz

  • Allstar compatible
  • Single channel receiver
  • 24V AC/DC
  • 8 dipswitches 318 MHz
K177A0112

LiftMaster Trolley Spring

  • Also known as: 177A112 62274 177A0112 062274 132C2180 177A78
400-CBAC-EG-115V

FAAC 1042011277 Long (EG) Gate Arm w/Positive Stops 50-1/2" L *** Price by Quote Only

  • 400 CBAC EG Long Arm with positive stops
  • For hydraulic Swing Gate Operator
  • This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system
LDJ-CAP-48MFD

Doorlec Run Capacitor for LDJ RCR50-370

  • 370VAC/B 50 uf 50/60 Hz
  • CSC run capacitor
GALV-295-6-L

Cut-to-Length Torsion Spring .295 x 6" Left Hand Wound Galvanized Blue Price per Inch

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
GALV-331-334-144-R

Torsion Spring .331 x 3-3/4" x 12ft RH Galvanized Red/White

  • Wire size: .331
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-312-258-144-R

Torsion Spring .312 x 2-5/8" x 12ft RH Galvanized Yellow

  • Wire size: .312
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-273-2-144-R

Torsion Spring .273 x 2" x 12ft RH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-262-334-144-R

Torsion Spring .262 x 3-3/4" x 12ft RH Galvanized Red/Yellow

  • Wire size: .262
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
PHOTO-065

Manaras Monitored Photoelectric Cells N4X Retro-Reflective 5-50' Range

  • Monitored NEMA 4X enclosure retro-reflective type photocell
  • 2-Wire
  • Suited for harsh environments
  • Range: 5-50 ft
Manual
S6TL2641E15

Erone 18-Channel Handheld Transmitter 433MHz

Wireless System Chart
2200-540

Linear Replacement Key for BG Snap Lock

BEA-10LIGHT-TG

BEA Modular LED Signal Light Segment Green

  • Signal lights for industrial and vehicle flow management applications.
  • LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
  • These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
  • Operating temperature: -40 to 122F
  • Nema 4/IP65
  • Base sold separately
    • .......more details
User GuideDatasheet
DS75-INSULATED

Light Commercial Insulated Rollup Door with Exterior Curtain Lock ** Price by Quote Only

  • Mini Storage door non insulated with exterior curtain lock
  • Custom ordered to exact size
2100-1650

Linear Plate with Solid Pin V Groove

2400-501

Linear Retaining Ring

PROBE-200

EMX CARSENSE-101 Direct Burial Probe with 200' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
OMT-6112-MON-N1

Manaras Medium-Duty Trolley Operator 1/2 HP 120V with Elect. Circuit Board Monitored N1 Eyes

  • Designed for use on smaller and low-cycling industrial standard lift sectional doors.
  • It features a high starting torque intermittent-duty industrial type motor and a quick release disconnect arm.
  • Equipped with the new Electronic Control Board (BOARD 070) with N1 photoeyes
  • Maximum Door Height: 14' (4260 mm)
  • Back Room: door height + 3'11" (1175 mm)
  • Head Room For Tracks: 5" (127 mm) above the highest point of door travel
    • .......more details
T120

Manaras Trolley Track 20ft for 3/4HP & ALL APT models up-charge

  • For models MGT/OTH/OTBH/RTBH 3/4 hp only with Chain #41
MPB-3

Doorlec Open Mushroom Stop Lockable Close Push Button Station

  • Green (Open) Red (Mushroom Stop) Black (Close) push-button station
2200-983

Linear Brake and Puck HSLG ***NLA Replaced by 2200-983-UPS

Q277

LiftMaster Wiring Harness Kit DC2000 K94-50262****no longer available

  • Compatible with LiftMaster® Models SL3000 and CSW200 Perimeter Access Systems
SPR410B12X1

Sprocket 410B12 x K1/4 2S 5/16-18 PH1/4

GALV-312-334-R

Cut-to-Length Torsion Spring .312 x 3-3/4" Right Hand Wound Galvanized Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
  • Galvanized
GALV-295-334-144-L

Torsion Spring .295 x 3-3/4" x 12ft LH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-262-258-144-R

Torsion Spring .262 x 2-5/8" x 12ft RH Galvanized Red/Yellow

  • Wire size: .262
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-243-2-144-R

Torsion Spring .243 x 2" x 12ft RH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-243-2-144-L

Torsion Spring .243 x 2" x 12ft LH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-363-334-L

Cut-to-Length Torsion Spring .363 x 3-3/4" Left Hand Wound Galvanized Green/White Price per Inch

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-375-INSTALLED
GALV-295-334-L

Cut-to-Length Torsion Spring .295 x 3-3/4" Left Hand Wound Galvanized Blue Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
DC-ADAPT125-100

Dyna-Hoist DC Series Adaptor 1-1/4" to 1"

GEAR014

Manaras Disconnect Bevel Gear 5/8" 20 Tooth OGH

MA033

LiftMaster Hardware Kit Only for Articulating Arm ** Arm Not Included

  • Hardware kit for articulating arm models MA024 and MA034
  • Articulating arm hardware kit
  • Arm sold separately
CCTD-02

Fuse 600VAC/300VDC Class CC Time Delay 2AMP Sold per Fuse

  • Sold per fuse
BEA-10FALCN-EX100

BEA Falcon Motion Detector w/Exp Proof Housing 100ft Cable

  • FALCON EX combines a microwave activation sensor with an explosion-proof / flame-proof housing
  • Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
  • FALCON EX can be mounted from 11.5' to 23' to fit any industrial application.
  • Nema4/IP66
  • Detection Zone: Falcon EX: 13’×16’ at 16’
  • Oerating termperature: -22-140F
    • .......more details
RS36203

Roller 3" Steel Roller Head Only Heavy-Duty 6203 Bearing 5/8"

  • Steel Roller Wheel diameter: 3"-C 6203 bearing
  • Roller Head Only
FM145

Nortek Mighty Mule Pedestrian Gate Lock Bulldog

  • Bulldog Pedestrian Gate Lock secures walk-through gates in a locked position.
  • The Bulldog lock is mounted horizontally and it locks the swinging pedestrian gate to a post or column
SETR2641AM1AN-C

Erone 2-Channel Mini Transmitter Grey 433MHz Proprietary Encoding

  • Heavy-duty construction
  • Elegant & easy to carry
  • Light grey and blue base with grey buttons
  • Unobstructed range: 656 ft (200m)
  • 60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
  • Two lithium batteries (CR2016) included
    • .......more details
Wireless System Chart
OSH-6213-M-N1-RH

Manaras Opera-SH 3/4 HP 240V 1 Ph Monitored ECB w/N1 Photoeyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
BCSI-HV-CONT-BLOC

Pivin Drapeau Contactor Block BCSI ** Price by Quote Only

OGH-6115-M-N1-RH

Manaras 1-1/2 HP 120V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
IRB-RET2-KIT

EMX Industries Universal Retroreflective Photoeye Nema 4X W/Reflector Hood New UL325

  • Universal UL325 Retroreflective Photoeye Kit
  • Compact design
  • Easy LED alignment
  • Easy-to-Adjust Ball & Socket Bracket
  • Rugged NEMA 4X enclosure
  • Integrated sensor hood improved reflector hood and ball & socket bracket
    • .......more details
Manual IRBRET2Spec Sheet IRBRET2
DC1000-125

Dyna-Hoist DC Series Direct Drive Opener 1 HP 110/240V 1ph ** Price by Quote Only

  • The direct drive operator consists of a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
  • Continuous duty 1 HP 90 V DC 1750 rpm motor suitable for 110 to 240 V 1 PH and 60 Hz power supply.
  • Comes with integral absolute encoder to control the door travel
  • 24 V 5 amps back-up battery pack and 3/8” ratchet socket to accept and crank for manually operating the door in case of power failure
  • Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
  • Nema 4 photocell
    • .......more details
Pulse Series Installation ManualsDC Series Brochure
18011

Doorlec Gearbox for TCBOD Barrier Gate

GALV-234-2-144-L

Galvanized Torsion Spring .234 x 2" x 12ft LH Blue/White

  • Wire size: .234
  • Inside diameter: 2"
  • Length: 12 ft
CRBH753L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Right Hand

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
2022691

FAAC Control Board for Model 741

10TD900INDHH4

BEA 4-Button Digital Transmitter Nema 4 900 MHz

  • Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
  • It also provides better penetration of obstacles.
  • IP65
  • Operating temperature: -10 to 55C
  • Controls one 10RD900 receiver
PCBA-PD3.3

Dyna Hoist/Pulse Replacement Drive Board for DC500-100

OSH-6533-M-N1-LH

Manaras Opera-SH 3/4HP 600V 3Ph Monitored w/ N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
29-NP812

Lead Acid Battery 12V 8A

  • Also known as: 29NP0812 K29-NP08-12 29-NP08-12
37350

Reversing Contactor CUL - 16 Telco 24V

CP-SH-34-16-1212

Lynx Complete Clutch Shaft Assembly for CDJH

  • 3/4" -16 x 12.50"
041-0180-000

LiftMaster Wiring Harness Camera/LED Pod Dual Lens

  • This replacement kit is compatible with the follwoing models: 84501 84602 85702 85702 87504 87802 B4603T B4603TC B6713T B6713TCH B6753T B6753TCH
2376.187*31.950

Whiting Torsion assembly .187 wire size 31" spring length 95" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
J501L5

LiftMaster Industrial-Duty Jackshaft 1/2 HP 115/230V 1Ph L5

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • J operators are attached to the door jackshaft to indirectly drive the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you
MILLER-LEAD-WIRE

Miller Edge Up-Charge for Custom Length Lead Wire Sold by the Foot

  • Up charge for extra lead wire
400CBAC01

FAAC 400-220V Operator Only ** Price by Quote Only

P-8866TC-OCS

Pulsar 6-Door O/C/S Transmitter 318 MHz

  • Allstar compatible
  • OPEN-CLOSE-STOP 6 doors
  • 8 dipswitches 318 MHz
Programming instructions
PRO-4X_MOD-1PH

Micanan Nema 4X Modification 1/2HP- 1.5HP 1-Phase

  • This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
  • For options M & U Micanan N-4X photocells are supplied
  • 1/2HP to 1.5HP Motors
K07-8063

LiftMaster Upper Crank BG790

  • Also known as: 07-8063 078063 G078063
K19-48069-NP

LiftMaster Limit Chain Assembly #48 x 69 NP

  • Compatible with LiftMaster® Model SL585U Slide Gate Operators
20.5359

BEA Harness IXIO with Relay 30ft

3-4734

Serco Bell Crank ** Price by Quote Only

  • For Serco loading docks
236-110

Serco 3/4" Klip Ring ** Price by Quote Only

  • For Serco loading docks
GHX-383-1HP-LH

Doorlec Explosion Proof Gear Head 1 HP 208V 3PH ECB Left Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station
15-50B12QGH-1

Sprocket 50B12QGH

  • Also known as: 1550B12QGH 15-50B12QGH 15-50B12QGH-1
P-535T

Pulsar 3-btn 27-Door O/C/S Transmitter 318 MHz

  • Allstar compatible
  • Wall mount
  • OPEN-CLOSE-STOP 27 doors
  • 8 dipswitches 318 MHz
Programming instructions
P-639T

Pulsar 3-btn 9-Door O/C/S Transmitter 318 MHz

  • Allstar compatible
  • Wall mount
  • OPEN-CLOSE-STOP 9 doors
  • 8 dipswitches 318 MHz
Programming instructions
MB-05506

Micanan Electric Motor Only 3/4 HP 230/460V 3PH Base Mount TEFC FR56

  • ase mount TEFC replacement electric motor
K41-0259-000

LiftMaster Chain Guard IHSL/ INSL24UL

ZAP-8830

Zap Battery Backup 8030/8830

  • 8830 Battery Back up systems allows operation of the operator during power outages.
CRG11136P

Pentagon Crank Gear 11:1 36kg PVC *** Price by Quote Only

DECO-FASTNR-HNDL

Decorative Handle (Carriage-Style) Fastener 3/4" Stainless Steel Black 100/pkg

  • Self drilling metal screw
  • Stainless Steel all black